Top ranking of the best tile cutters in 2019

Today it is impossible to imagine the construction of various houses, cottages, saunas, office buildings or building complexes without the use of modern tiles, which are very important for decoration. There are many types of tiles, including marble or ceramic, porcelain stoneware. Therefore, it is useful to have an excellent tool on hand - a tile cutter. We will talk about the best models for 2019 in this article.

Attention! A more up-to-date 2022 ranking of the best tile cutters is compiled in separate material.

About tile cutters, safety when working and processing stone

For the work of the tiler and tiler, a tile cutter is used, that is, a special tool for cutting tiles, stone, and glass. Cutting is done in many ways:

• imposing risks, an incision, and breaking of the material is already being done along it;
• cutting and sawing;
• biting off pieces from the edge.

Whatever the facing is, everywhere it is required to make trimming to the required dimensions and straight cuts, as well as holes, recesses and figured cuts, cutting 45 degrees. These special actions depend on the product type. Not every tile cutter has all the functions, and it is advisable to take this into account when purchasing a structure.

There are three main types of device:

• mechanical;
• electric;
• manual.

When using electric tile cutters, it must be taken into account that they do not tolerate humidity more than 70%. The product is placed only on a flat floor, and if it is a large-sized machine, then a separate room is allocated for work. They use glasses, special headphones, as abrasive dust is collected in the air, and the noise level is up to 85 dB. It is better not to overload the mechanism. When thick tiles are cut and the material is fed too fast, it is dangerous. In the presence of the risk of overheating of the engine and the possibility of splitting the equipment.

How to choose a product

To buy a mechanical tile cutter, it is wiser not to chase a low price in order to save money. The cost of goods varies from 300 to 2500 rubles. Cheap models up to 1000 rubles are only good if they are rarely used for ceramic soft tiles. More expensive models priced at 1000-2500 rubles are suitable for long-term operation, as they withstand huge loads during operation.

Models up to 6000 rubles are suitable for domestic use.The cheapest samples are suitable for frequent cutting of glass, porcelain stoneware or ceramics, but they are not used for cutting stone. The device up to 30,000 rubles is professional, it is easy and convenient for them to perform accurate cuts and work with hard materials. Ordinary cheap specimens can be used in modern professional construction, for working with stone or concrete slabs with a thickness of more than 100 mm.

The cost depends on the brand. The most inexpensive models: Bison and Caliber, Enkor, Energomash. The world famous companies DeWALT, Fubag, Bosch, Stayer produce more expensive devices. Manufacturers usually give a 1-2 year warranty on their equipment and also provide warranty repairs. When carrying out repair work in the kitchen and in the bathroom, where the tiles are up to 15 mm thick, then use a mechanical tool. If the thickness of the material reaches more than 30 mm, then an electrical design will be required.

Product Selection Criteria

Before buying a product, pay attention to the dimensions. For cutting ordinary tiles, a small bed 400x180 mm is suitable. At the same time, the strength of the material of the frame is taken into account, the durability depends on it.

For frequent work, a circular cutter, special built-in squares, rulers, tile strengthening mechanisms are important. When processing durable thick ceramics or trimming, use an electric tile cutter.

Of great importance is the speed of rotation of the disk, so protection from flying fragments of ceramics and enamel is required. The idle speed doesn't matter. Engine power is very important and should be 2 kW on average. The diameter of the common cutting disc depends on the working power of the product. The larger the disc, the thicker the material is cut.With a 350 mm disc installed, it easily cuts 135 mm material.

The main selection criteria: the popularity of models, characteristics. Manufacturers and cost are taken into account.

Top rating of the best tile cutters

Mechanical devices

Nuova Battipav SUPER PRO 900

The modern and special Nuova-Battipav SUPER PRO 900 is an excellent tile cutter for diagonal, straight cutting of double or single fired ceramics. Cuts fine stoneware. The carriage consists of nine ball bearings, it is adjusted quickly and easily. This product cuts tiles away from itself. The working table is equipped with springs to facilitate the breakage of cut tiles with a thickness of 5-19 mm. A large cutting wheel with a diameter of 22 mm, there is a graduated special stop for a straight cut, and the tile itself will be easy to break at the point of cut.

Manufactured by an Italian company. It is used for cutting material up to 900 mm long, as well as for diagonal cutting of 63x63 tiles. The cutting accuracy is perfect, the fracture is excellent, suitable for construction repair work. The dimensions of this design are traditional. The machine is excellent, professional.

Characteristics:

• the class of the product is professional, the type is manual;
• comes with a broach;
• table dimensions 636x636 mm;
• knife dimensions are 22x6.1x4.7 mm;
• tilt angle up to 45 degrees;
• there is no drilling device;
• sliding bearing mechanism;
• 1 year warranty;
• dimensions 1160x340x160 mm.

Video review of the device:

• the quality of the model is excellent;
• easily cuts tiles 60x60;
• there will be no withdrawals for sure;
• chips are weak;
• comfortable design;
• assembly;
• high cutting accuracy;
• compactness;
• ease of transportation.

• overall performance is weak;
• price
• uncomfortable handle.

Bottom line: A manual excellent quality tile cutter has a working surface of 900 mm, easily copes with cutting tiles. The construction is durable. The average cost is 2000 rubles.

SIGMA TECNICA 2A3

Has a compact size. The model is functional and durable. The cutting system is standard. The device allows you to cut various materials with a large thickness. Self-type cutting system makes it possible to process materials quickly and easily. Differs in such qualities as accuracy, speed, high precision of cutting. The cutting length goes exactly up to 51 cm, the cutting diagonal is 35 cm by 35 cm with a cutting depth of 20 mm.

The table for work reduces the rigidity of the cut, and also creates a cushioning effect. When a tile splits, the precision ruler is centered. It has a locking system at every corner. For speed of movement, it is fixed to the platform along the rail of the product. The tool is compact and easy to use.

Characteristics:

• the desktop has a width of 28 cm;
• cutting conventional system;
• cutting wheel 12 mm;
• table with springs;
• there is a cut of 45 degrees;
• 5 year warranty.

• the ruler is close to the tiler, and this is very convenient;
• thanks to ball bearings easy sliding of a separator is provided;
• the table is spring-loaded, which is effective in separating the material;
• you can buy more rollers for cutting glass, enameled and glazed tiles and mosaics;
• cuts thick materials.

• price;
• the handle is not the most comfortable;
• there are chips.

Bottom line: A modern tile cutter cuts material with a large thickness. Convenient line available. The table is excellent. The average price is 14,500 rubles.

Favorite 11-225

It is a modern excellent plictor cutter. Works on bearings, has a long service life.Bed width - 180 mm. Serves for cutting different tiles up to 16 mm thick. Thrust bar easily rotates up to 90 degrees, there is a spare cutting element. The cutter is 500 mm long and 22 mm in diameter. A special top feed of the cutter and disc is used when cutting ceramic floor tiles. The bed is equipped with stiffening ribs of a reinforced type made of special steel.

Characteristics:

• manual type construction;
• Mechanics;
• manufacturer China;
• cross cut at 45 and 90 degrees;
• there is an element for adjustment;
• used by experienced builders.

• effective tile cutter;
• handy handy device;
• used for various ceramic tiles;
• year warranty;
• cuts great.

• roller angle.

Bottom line: Favorit is used for cutting ceramic tiles. The average price is 30,000 rubles. When buying a tile cutter, consider the reputation of the company.

Electrical devices

Husqvarna TS66R

Feel free to call a professional product. There is a special and convenient pump. The working standard saw moves clearly along the rail, the cut is easily controlled. The only drawback is the lack of a ruler, which is installed independently. Expensive machine. An ideal tool for experienced builders. Long service life. The saw cut is easily adjusted, the cutting tool maneuvers. Powerful motor performance.

The cutting depth is standard and equal to 40 mm. It differs in manufacturing quality. According to numerous reviews, the cut is accurate, and the error is 0.3 mm. The working electric table is wide and easily cuts tiles of different sizes. A special type disc has a diameter of 200 mm. The design is simple, the cutting head can cut various materials.The stroke length is wonderful and the kit is ordinary.

Characteristics:

• the source of work is the network;
• cut at 90 degrees;
• protection class IP 54;
• minimum sound pressure level;
• noise has a level of 63 dB;
• frequency 50 Hz.

Video review of the tile cutter:

• technical properties are ideal;
• the feeding system is convenient;
• there is a collection of water;
• carriage adjustable;
• cool machine;
• convenience of work;
• understands quickly.

• the table rusts quickly;
• expensive.

Bottom line: The dimensions of the product are large, the cutting accuracy is excellent. It is used for stone, tile, for porcelain stoneware and marble, as well as for cutting bricks. The average price is 30,000 rubles.

Fubag MasterLine 6 Star 660

Electric machine for cutting stone and tiles, performs angular and straight cuts, as well as combined cuts, thanks to the cooling system, it works for a long time. Equipped with a special cooling system, which prolongs the life of the machine. The table is large, it processes large stones.

For work it is better to use a cutting depth of up to 30 mm. The frame has 8 stiffening ribs. Water tray available. The tool provides cutting time. Equipped with a fan for cooling the working engine. It works intensively and is distinguished by the accuracy and quality of the cut. The design is easy to disassemble, convenient to store and transport. The maximum cutting length is 660 mm.

Characteristics:

• cutting depth 50 mm;
• way top;
• rpm 2800;
• cutting angle 90…45;
• 0.8 kW motor;
• works from a network of 220 V;
• dimensions are compact;
• weight 30 kg;
• material - ceramics and stone;
• disc diameter 200 mm;
• angular cut, precise.

Video review of the tool:

• clear apparatus;
• build quality;
• saving time due to the quality factor of the cut;
• parts of the body are connected securely;
• carriage travel is tight and precise;
• the disk is easy to lower and raise comfortably;
• works great.

• the location of the crane is strange, that is, above the motor;
• flexible wiring is not ideal;
• if the maximum cut is made, then it is convex, not clear;
• there is no fixation for tiles;
• disk original low quality;
• sometimes there is a beating of the disk.

Bottom line: The electric machine makes angular and straight cuts, the cutting accuracy is significant, and thanks to the cooling system, the machine works for a long time. The average price is 30,000 rubles.

DeWALT D24000

Serves for wet cutting of concrete, stone, porcelain and brick, ceramics. Provides a variety of cuts: straight, diagonal, and beveled. Maximum working cutting accuracy. The console system will provide a processing width of up to 610 mm, requires special grounding. The design has a special water collector at the back, moves with the table and catches the water that comes from a large tile when cut diagonally.

The cutting disc is set with a minimum diameter of 150 mm. Disc dimensions reach 254 mm. Available cutting ability with an angle of 22.5, 45, 90 degrees. For easy quick transportation, dismantled parts should be placed in a special tank, and for easy cleaning of the structure there is a cutting removable trolley.

The machine is used in domestic conditions, for modern workshops, granite workshops. It features a more powerful motor, a large disk, powered by three-phase current. For safety, a stop button with a lock is equipped.

Characteristics:

• power 1600 W;
• the number of revolutions is 4200 per minute;
• acoustic power 103 dB;
• standard equipment;
• cutting depth up to 95 mm;
• US manufacturer, assembly in Taiwan;
• guarantee year.

More about the tool in the video:

i> thanks to the slide with rubber, different tiles lie hard;
• cleanliness of cutting even fragile material is excellent;
• there are oblique cuts, socket, gutters;
• assembly is excellent;
• the model serves for a long time;
• rusting is absent;
• cutting depth 95 mm.

• the saddle is not made even;
• the engine can roar strongly during start-up and operation;
• it costs expensive;
• the original disc is easily erased;
• format difficulties.

Bottom line: Serves as a machine for special wet cutting of materials, provides a variety of work. The average price is 60,000 rubles.

Forte TC 250

The cutting design of the Forte TC 250 is suitable for mobile stationary work because of its small size and convenience. It has a range of possibilities, an excellent tool, the depth of cut here is greater than that of other products. There is a durable motor with copper winding, which is required for increased service life and great functionality, the cut will be accurate in tiles and stone.

The product is excellent, and cuts various materials. Suitable for specialized workshop. The stroke length is 1.02 meters. The machine is compatible with a disc up to 25 cm. It is equipped with a powerful engine. Cuts almost all types of tiles. There is a water supply for work.

Characteristics:

• power 1200 W;
• product type electric;
• large table;
• sold in a special cardboard box;
• cutting depth - 50 mm.

Tool overview - in the video:

• quality product;
• cuts ceramics and marble;
• price;
• perfectly cuts and makes holes;
• a large number of revolutions;
• cooling.

• the disk, if you press it very sharply against the tile, then it slows down;
• table without rubber.

Bottom line: Works quickly and easily, suitable for all types of tiles. The average price is 15,000-16,000 rubles.

FUBAG A-100 KM

The machine is powerful. The stone cutter serves for universal use, copes with the processing of artificial and mineral material. For each texture there is a special disc, which is covered with a steel protective casing. Cuts many products from stone to concrete up to 1000 mm long. The table has a unique design with a frame. The modification has an electric motor 220 V.

Characteristics:

• product type diamond work;
• desktop type design;
• cutting depth up to 110 mm;
• permissible cutting angle, 45-90 degrees;
• weight 108 kg;
• front-feed disc;
• power 2.2 kW.

• functional;
• handles well;
• cutting depth is excellent;
• number of revolutions 2800;
• cut quality.

• The engine should be even more powerful;
• the price is too high;
• processing is slow.

Bottom line: Great for all types of material from ceramic and concrete to stone with a length of 1000mm. The design of the table is ideal, the rigidity is large, there is a cutting with an angle of processing. The average price is 130,000 rubles.

Sakuma TS180S3

Sakuma TS180S3 is an electric stationary machine that consumes 800W of power. Dry cut available. Power is supplied through the 230 V network. The manufacturer is Sakuma, China. Diameter of a diamond disk — 180 mm. The table is comfortable. Product warranty - 1 year.

The machine is used for general cutting of modern medium and small size wall and floor tiles. Table working galvanized.

Characteristics:

• cooling;
• table with minimal dimensions;
• number of revolutions 2950;
• 45 degree corner cutting;
• corner stop.

• sufficient power;
• convenient work button;
• cuts ceramics;
• there is wet cutting.

• the table is weak;
• the handle is terrible.

Bottom line: The standard design with a power of up to 800 W is mains powered. The average cost is 3,000 rubles.

About the tool

Today, tile has already become the most fashionable material, for the finishing of which you need to buy a tile cutter. Its type and appearance depends on the quality of the texture. Allows you to process both glass and stone. Differs in simplicity in operation and efficiency in work.

A wide range of tools are available. It will not be difficult to choose the required model based on the functionality, scope of work and cost.