Currently, there are tens of millions of electronic cigarette lovers around the world. Vaping appeared during the crisis of the health care system in America. Cigarettes began to produce different types. From simple mods to personal steam generators, disposable and long lasting, they have become the go-to gadget for smokers. In the material we will talk about the best atomizers for electronic cigarettes in 2022.
Content
The electronic cigarette is powered by batteries. Such a device uses a mixture of propylene glycol, vegetable glycerin and water-soluble flavors, sometimes nicotine. The mixture is called e-liquid or e-juice. When puffed, the evaporator and the coil inside the device heat up.
In this case, the e-liquid turns into vapor. A person who inhales vapor from an electronic device is called a vaper, from the English word Vaping.
An electronic cigarette contains a cartridge where an absorbent material with liquid impregnation is located. During the puff, a special sensor sensor is triggered, the evaporator starts working, converting the liquid mixture into vapor in the cartridge. The evaporator is the atomizer (Rebuildable Atomizer).
The first models consisted of a liquid cartridge and a vapor conversion chamber with a heater. Today, new elements are used - clearomizers with a transparent body and cartomizers. The devices have acquired compactness and fast refueling, and the steam has become thick.
Two types have been developed. Serviceable: Great tasting evaporators generate steam in large quantities. Maintenance-free: in the event of a breakdown, they are replaced with new ones.
Serviced evaporators are divided into four types:
The first type allows you to adjust the traction resistance, saturation by the modernization method and various windings.Inside the evaporator there is a reservoir with liquid. The best models of atomizers have a base with a heating element in the form of a spiral with a wick. The coil can be picked up at a vape shop. A reservoir or tank of different capacities is located above the base. It contains 2-10 ml of liquid, which through the slots and holes rises up the wick and exits to the heater.
Dripka RDA, from the English "drip", does not have a reservoir for liquid. Instead, the evaporator has a wick with silica or cotton filament. The small amount of juice in the wick causes the smoker to constantly add liquid drop by drop. The evaporator is designed so that it can be installed from one to four wicks. Increasing the quantity will lead to an improvement in the quality and saturation of the steam. Modern RDA evaporators are equipped with top airflow. Air flows down to the winding, bypassing the chamber, then rises through it to the drip-type. The capacity in them is less than that of the basic devices, there is no camera, there is a top cap at the top.
Genesis is a complex device where fluid is supplied through a metal mesh.
RDTA is a complex hybrid drip-tank evaporator, different from drip, has a side airflow.
When buying a vape atomizer, there are a number of factors and features to consider.
If you have to buy a maintenance-free evaporator, you need to know the model of the previous one, otherwise the new one may not fit.
It is more profitable to purchase a serviced device. Then the spiral can be wound independently, adjusting the taste and making it brighter.
Serviced gadgets are multifunctional, clean well, but have a higher cost.
The capacity of the camera is important.For beginners, the small size is suitable, soaring is enough for about two weeks. Heavy smokers should choose larger options.
This category presents the best models of atomizers, whose cost does not exceed 1 thousand rubles.
This is the first atomizer with a strong cigarette puff from asMODus, which is designed for 1 coil. Despite the fact that the air flow here is not regulated, the puff is really cigarette and very strong. The diameter of the model is slightly larger than traditional cigarette boxes: 24.5 mm (fit), 25.5 mm (at the widest part).
Height without drip tip is 32.5mm. The drip tip itself is quite low, and its inside diameter is only 3 mm. This is the original 510 format, which makes it possible to change it to another compatible one at the discretion of the user.
The atomizer tank is made of Ultem, while the shaft and base are made of stainless steel. The evaporation chamber is quite miniature, besides, part of it is reserved for racks, which favorably affected the transfer of aroma. As you know, the smaller the evaporation chamber, the better the taste.
The model has 2 racks in which there is 1 spiral (in a horizontal position). For ease of installation, we advise placing coils that are wound counterclockwise. The diameter of the shaft is 1.7 mm, which is most likely made taking into account a strong tightening. Also in the model, the processing of the dome in the form of a cone is implemented.
Average price: 990 rubles.
Some atomizers simply do not lose consumer demand. This model is a prime example of this. This is one of the most famous vaporizers of the past years, which does not lose its relevance and consumer demand in 2022 due to its simple design, high performance, low price and wide availability.
The model is 24.5mm in diameter, but because of the small “cutout” (at the bottom of the base), the atomizer looks great with 24mm mods. The height is 62.5 mm when taking into account the 510 format drip tip included in the package.
The sizes are traditional for atomizers, since 24 mm is the most well-known format. The model holds 4 ml of liquid, which it consumes very carefully and carefully, if you use suitable removable evaporators. However, this atomizer is able to empty the container in a short time if a high-performance heating element is installed. Filling is carried out by means of the top cover, under which there are large openings for filling.
Average price: 990 rubles.
This is a traditional atomizer with a single coil, which has a bottom airflow, stands out from its peers with excellent flavor and warm saturated vapor. The device belongs to the classic examples of very tasty 1-spiral models.
This atomizer is made by OFRF, which entered the market not so long ago, but did it quite effectively. The dimensions of the model we are considering are classic: 24 mm (fit) and 35 mm (height), given the 510 format drip tip, made in an unusual form factor (it is very comfortable to use).
The device has small dimensions when compared with analogues. Under the dome of the atomizer there is a base for 1 coil, but with 4 screws, and therefore it does not matter in which direction the coil is wound. The base is slightly raised above the bottom, so the GTA system is implemented here with a short steam line and improved taste transfer in this way.
The transfer of taste is also affected by the extremely miniature vapor chamber, which gives the user a dense vapor, as well as the bottom blowing performance, which is traditionally considered tasty.
Average price: 990 rubles.
This is a large ADVKEN 24mm tank with a large volume and excellent flavor transfer. The latter is the main advantage of the model. The taste is really good, but there are difficulties in using. This is a classic atomizer that measures 40mm high including the drip tip and measures 24mm in diameter (fit).
The top cover has a very long thread, which is not always comfortable to use. The lid has an 810 format drip tip, no rings.The model is large. Inside there are Velocity-shaped racks for 2 large spirals and a large air flow.
The blower here literally blows through the evaporation chamber: 2 air holes in the bottom of each coil, as well as a side feed directly from the rack, form a real 3D blowing system. For air intake there are 6 large holes with an adjusting ring. Thanks to this, the tightening is very free.
Instead of shaft dilators that reduce the transfer of taste, an alternative option is installed here - bubble glass, which forms a 4.5 ml reserve compared to 3 ml in classic glass. Glass for this atomizer model is sold separately, there are also classic options on sale.
Average price: 990 rubles.
The Chinese manufacturer has released a Hobbit atomizer model with removable evaporators. So far, it is in 9th place compared to well-known competitors. The case without engravings, made of stainless steel and glass, the plastic top has good heat resistance. Small capacity tank with top filling. The peculiarity and inconvenience lies in the fact that removable evaporators from other manufacturers will not work here.
The price of the device is relatively low: 790 - 1290 rubles. In addition, you will have to buy removable evaporators of the same production.
This category presents the best models of atomizers, whose cost is above 1000 rubles.
This is a serviceable atomizer from ThunderHead Creations, which was developed in collaboration with blogger Tony Vapes. There is a tank with a large volume, cables made of steel (for supplying liquid), as well as a deck with a ceramic plate to fix one spiral.
THC models stand out from the competition with a fashionable, even strict, appearance, which fans remember from the Tauren. This model continues this tradition: on top there is a wide 810 format drip tip with a decorative ring, and the atomizer body is made of steel.
On the sides of the skirt there are 2 rows of honeycomb holes for airflow, and below there is glass, which is protected by a metal frame. There are also windows to control the degree of contamination. The height of the device is 50 mm, the diameter is 24 mm, so this model goes well with the most common mods.
From a technical point of view, this model in some way has 2 domes: an outer one and an inner one, which, if necessary, can be removed. In fact, this is an insert made of metal with thick walls. Its purpose is to improve flavor transfer by reducing the volume of the evaporation chamber. An additional option of this element is to bring the air intake grids closer to the coil, which favorably affected the quality of the steam.
Air for blowing enters through the holes located on the sides of the skirt. There are 13 of them on each side, it looks like a honeycomb.At the same time, the design partially imitates the lower airflow, as the air penetrates inside at a small angle. The thrust is adjusted by turning the skirt, but there are no risks for a comfortable grip, but this does not significantly affect the overall picture.
Average price: 3590 rubles.
Unlocks TOP UD Goblin Mini V3. Serviced model at a low price. Delicious tank with a medium puff. As additional accessories serve: the second one spiral base, spare glass; narrow drip-type, which does not freeze during frost and gives more taste to the vapor; spare o-rings. Steel or black body color - the choice of the buyer. For the convenience of the user, top filling has been added (unlike the previous version of the model). The fluid supply is controlled, but the o-ring is inconvenient to scroll due to its small size.
The price of the product ranges from 1,390 to 2,390 rubles.
An updated version of the Griffin 25mm with a redesigned 18.9mm base. At the bottom of the base there are large holes that do not allow the laid cotton to seep through.Due to this design, the wick is fed hourly, and you can smoke continuously. Each coil is blown through two cylindrical nozzles in the style of Kennedy drips. The air channels inside the cylinders are tightly closed and do not allow condensate to seep into them. At the top of the device, the top cap is made of Delrin plastic.
The material is characterized by heat resistance and the lowest thermal conductivity. Through the mouthpiece, it almost completely insulates the smoker's lips from the heat. The outer casing is made of stainless steel, rubber and durable PYREX glass. Filling holes are suitable for dispensers of various designs. A modern battery mod contacts the 510 connector via a built-in customizable pin. The undoubted leader among vapers is the honorary top of our TOP.
The Griffin 25 mm Plus RTA model from GeekVape can be purchased for 1990 rubles.
The rival of the so-called "Griffon" Gemini RTA from Vaporesso strengthened its position on the 4th place. Oversized tank with velocity struts, two-hole top filling. Holes - fans are located at the bottom of the tank and are easily regulated by the ring. The top holes blow steam, making it less hot. Lazy people can afford a maintenance-free analogue of the model - Gemini Tank.
The market price is 1800 - 1990 rubles.
A small-sized universal advanced box mod with good equipment takes the 6th place in the rating. The kit includes two coils, 4 spare O-rings, a USB cable and a gift box. Available in one of five colors. The device can be disassembled into small parts and cleaned well. All small details are made without backlash. Drip-type made of steel, does not overheat due to the installed Delrin prefix. The operating temperature ranges from 315 to 100 degrees. The convenient opening of the screw-on cap allows you not to squeeze out the liquid when refueling.
Clearomizer with 2ml tank capacity and top cup refill system. Inside the tank there is a recess in the form of a cone. This design contributes to the protection of the tank from the ingress of condensate. At the bottom of the base there are holes that provide enhanced ventilation of gases inside the device. Installing various types of evaporators allows you to adjust the output power of the device. The iStick range has long found its buyer. The gadget is suitable for longtime smokers and beginners. If necessary, the box mod device can be reflashed by connecting it to a PC using a cable.
2200 - 2500 rubles - this is the price of the device on the Internet.
For beginners, the IJoy Limitless Plus RDTA model is suitable. She is second in the ranking.Bucko-drip with a plus is made on the basis of the main classic variation of IJoy Limitless. The universal design of the service tank is made for quick and convenient maintenance and replacement of parts. The versatility of the model allows you to make steep windings and makes it possible to install thick spirals. With such a system, a beginner can independently adjust the airflow, make windings, getting saturated steam and excellent taste sensations.
The depth and expressive taste of the hookah puff is fully revealed thanks to the open airflow. The volume of the e-juice container is quite good - 6.3 ml, which allows you to use the device for a long time. The base has two posts with titanium screws, similar to velocity. The difference lies in the location and design of the holes: the screws are screwed in vertically from above, and horizontally below. If desired, the drip-top in the top-cap can be replaced with a simple 510th. The model can be attributed to the top.
A cool gadget for vapers costs 1350 - 1650 rubles and is sold in five colors.
5th place - a maintenance-free device with a lower airflow that can be configured. Sufficiently high power provides saturated steam throughout the day with average use. The body is made of aluminum, the flask is colored. The advantage of the model is the ease of refueling.It is necessary to move the cover with the mouthpiece in the direction of the arrow and pour liquid into the hole. By changing the evaporator in time, you can smoke constantly. A spring is installed on a 5 mm long connector with a 10-turn thread. The capacity of the medium-sized tank is 5 ml. There is a color indicator showing the level of charge. The package contains a tankomizer, a battery pack, two evaporators, spare parts, a cable. The electronics of the device protects the replaceable evaporators from mains short circuits and damage.
The model costs 1990 rubles. An additional fee of 100-200 rubles will have to be paid for the color of the gadget. Vaporizers of unusual colors are on sale: khaki, camouflage, carbon fiber, etc.
The model for beginners among smokers with a small flask of 1.2 ml, a weak battery and low power output, is in 8th place. Practical and ultra compact. With constant puffs, the battery lasts for a couple of days. Only cigarette puffs MTL, hookah puffs are not provided in the model. Blowing is fixed, not adjustable. Switching on is manual. The mouthpiece does not change. The box comes with an additional 2 replaceable evaporators, a micro USB cable, spare parts, a mouthpiece.
The cost of the option is only 1190 rubles.
Digiflavor, together with vaper blogger Rip Trippers, has developed and promoted a device - a tankomizer with service functions, which is conveniently located on the 7th line. A base with four coils, with adjustable resistance and airflow, a stainless steel case, a 2 ml container, an excellent complete set - this is a brief description of the device. Newfangled base posts are like terminals with springs.
When unscrewing, space is freed up for the spirals: they can be installed from one to four. Air for blowing is taken through the lower holes on the sides. The design of the tank resembles a drip. At the same time, it has a closable liquid tray, which allows you not to refill the device after each puff. So there are only a couple of threaded parts in the device. The liquid from the chamber does not spill or evaporate due to the “non-spill” system inside the chamber. The product is easy to transport both in a suitcase and in a pocket. The system is 100% leak-proof. The atomizer is equipped with two mouthpieces, one of them is protected from liquid splashes.
You can buy Pharaoh 25 Dripper Tank for 1490 rubles.
The top three is opened by Serpent mini 22mm. The tank is produced in silver and black glossy colors. A 4mm air vent is built into the base of the device.Through the rings, the lower air ducts are regulated, through which the desired steam supply is achieved. Even beginners can make winding, as the base is made with two oppositely installed racks. The upper ring is responsible for the flow power of the vapor mixture. The evaporator is equipped with such a function. The lid is engraved, which allows you to open the lid without any problems. Serpent mini has a steel drip tip. However, it can be replaced with a standard 510, since the gadget has a standard socket. The material of the flask is durable Pyrex glass, which can withstand long-term exposure to the liquid inside the flask.
The cost of the model is 1290 rubles.
Fans of electronic cigarettes can choose an atomizer model based on functional features, beautiful appearance and compactness. Manufacturers continue to develop new versions of devices for vapers, not stopping, but keeping up with the times.