Rating of the best Inno3D graphics cards in 2022

There are many models on the computer electronics market that make up the rating of the best video cards, including Inno3D. The manufacturer produces video cards for laptops and PCs based on the NVIDIA graphics accelerator. There are a huge number of modifications to this series of video cards, which makes them very popular. However, all models have a common advantage - this line is distinguished by small dimensions, an almost silent cooling system, high efficiency and undemanding power supply.

It should be noted that NVIDIA is included in the rating of the best manufacturers of components for personal computers. Before choosing the most suitable model, it is recommended that you read the tips that list the selection criteria, as well as the technical characteristics of individual video cards. This is the only way to avoid selection errors.

Tips for choosing a graphics card in 2022

Since a video card is considered the most expensive type of component, you should be especially careful when choosing it. The processor clock rate is considered important when identical chips are installed in video cards. Installing different chips cannot guarantee that a device with a higher frequency will be the best. The next selection criterion is the bus width - 128-bit and 256-bit, respectively, will refer to different price ranges. In addition to the bus width indicator, such video cards will also differ in the chips installed in them and in the cost. A 256-bit bus is twice as expensive as a 128-bit one.

Despite the fact that such a parameter as the amount of video memory also deserves attention when choosing a video card, it is one of the fundamental ones when choosing video cards with the same chips related to the budget price segment. The amount of available memory on older models doesn't really matter. However, when choosing modern modifications, you should familiarize yourself with the tests of the computer game preferred by the gamer, checking the capabilities of various components with different amounts of video memory.

Thus, when choosing a video card in 2022, you should find out the number of frames per second that it is capable of delivering and FSAA. Focusing on the technical characteristics, one can only assume the ratio of the power of the two tested models. Often, a card that has the best technical performance during the game process gives worse results than an analog made by another company.You can only decide if you make a visual comparison.

Equally important is the device for which the video card is selected. For example, an outdated PC with 2GB of RAM is unlikely to cope with a video card that has the technical dimensions of a 256-bit bus width. In the case when a personal computer has less technical capabilities, the installation of advanced gaming graphics cards ceases to have any effect on the performance of games. In this case, all games during the launch process will freeze.

When it comes to replacing all the components of a personal computer, you can purchase any modern video card. This is due to the fact that every couple of years more and more powerful spare parts are produced, the cost of which is significantly reduced in price. From this we can conclude that buying the latest model, for example, such as a low-profile card Low Profile for an unreasonably high price, does not make sense. In particular, if the budget for the purchase of this component is limited and the question of how much it costs is of great importance, then before deciding which company is better to buy, you should focus on the testing indicator.

It should also be noted that it is not recommended to install a video card for games of the latest model on a budget personal computer made in China. At best, the processor will not be able to start, which is affected by too much power of the card. As for the dimensions, they should be about thirty centimeters in length. Purchasing a larger or smaller spare part will make it impossible to install it in a PC case.You can find out the exact size of the part by reading the information provided by the official website or online store.

One of the existing modifications

Many still not enough professional gamers are also wondering: is it better to buy two budget graphics cards or one of the most powerful ones. In this case, one should give preference to one, but of better quality. Installing two cheap video cards is not recommended, despite the best test results.

There is also such a criterion as the overclocking speed of video chips. However, this indicator is also not always dictated by the cost of the card. The ability to overclock is determined by the level of safety margin and the quality of the cooling system, as well as the principle of its operation. It is not uncommon for overclocked cards of a cheaper segment to be in no way inferior to expensive models over time.

The best models of video cards Inno3D

Inno3D GeForce GTX 1070

The Inno3D Geforce GTX 1070 is a gaming graphics card capable of delivering a maximum screen resolution of 7680x4320. The manufacturing process is 16 nm. The 1607MHz GPU component can drive up to four monitors simultaneously. Memory type GDDR5 with a capacity of 8 GB. The 256-bit bus model supports CrossFire and Quad SLI. DVI-D, HDCP and HDMI connectors are provided. A card with 5.0 shader frequency and 152 texture units. Inno3D Geforce GTX 1070 are components that support DirectX 12 and OpenGL 4.6 standards. CUDA and Vulkan are also supported. Designed to work with a block with a recommended power supply of 500 W, has four fans and three occupied slots. The cost of the video card will cost 32,000 rubles.

Inno3D Geforce GTX 1070

• high image quality and rasterization;
• an overview is given to four monitors;
• large amount of memory;
• the presence of the CrossFire mode;
• modern graphics processor;
• with Quad SLI function;
• three connectors are provided;
• not bad in terms of power;
• number of texture units 152;
• 0 shader frequency;
• support for DirectX 12 and OpenGL 4.6 standards;
• there are four fans;
• good anisotropic filtering;
• suitable for graphics;
• the presence of three occupied slots;
• support for CUDA and Vulkan.

• high price.

Inno3D GeForce GTX 1050

The Inno3D GeForce GTX 1050 is a good and cheap low power 14nm graphics card with a screen resolution of 7680x4320. It can broadcast a signal to three monitors, has a graphics processor frequency of 1290 MHz. The card with a capacity of 4096 MB has a GDDR5 memory type with a frequency of 7 GHz, it has a 128-bit bus. DVI-D, HDCP and HDMI connectors are supported. 5.0 shaders, 48 ​​texture units. The model is designed to work with standards such as DirectX 12 and OpenGL 4.5 and 400W power supplies. This video card provides support for CUDA and Vulkan, there are two fans. Such a model is included in the class, which is made up of budget electronic components for a computer and costs 12,000 rubles.

Inno3D GeForce GTX 1050

• high screen resolution;
• process technology 14 nm;
• the number of broadcast monitors is three;
• there are three connectors;
• work with DirectX 12 and OpenGL 4.5 standards;
• the presence of CUDA and Vulkan;
• affordability.

• 128-bit bus;
• low frequency of the video processor;
• equipped with two fans.

Inno3D GeForce GTX 1060

The Inno3D Geforce GTX 1060 is a gaming graphics card with a 16 nm process technology and a screen resolution of 7680x4320.The 1506 MHz GPU component broadcasts the signal to four monitors. GDDR5 memory has a capacity of 6144 MB and a frequency of 8 GHz. The video card has a 192-bit bus. Supported connector types are DVI-D x2, HDCP and HDMI output, DirectX 12 standards, OpenGL 4.5.5.0 version of shaders. There is CUDA and Vulkan. The spare part, equipped with two fans, is designed to work with 400 W power supplies. In terms of price, the GeForce GTX 1060 can be attributed to the class that consists of inexpensive technical components, since such a video card costs 19,000 rubles.

Inno3D Geforce GTX 1060

• 16 nm process technology;
• great opportunities for screen resolution;
• signal transmission to the interface of four monitors;
• a good amount of video memory;
• powerful cooling system;
• high frequency memory;
• connection through several types of connectors;
• work with DirectX 12 and OpenGL 4.5 standards is provided;
• shader frequency 5.0;
• good TDP indicators;
• VESA Stereo;
• good feedback from gamers;
• availability of CUDA and Vulkan.

• 192-bit bus;
• insufficient number of fans for instant cooling.

Inno3D GeForce GTX 1080

Inno3D GeForce GTX 1080 is a gaming and office card with 16 nm process technology and 7680X4320 screen resolution. The signal can be fed simultaneously to four monitors. A device with a GPU frequency of 1607 MHz is equipped with a sufficient amount of memory, which is more than 8 GB. GDDR5X memory has a frequency of 10 GHz. A 256-bit bus is installed, 5.0 shaders, there is CrossFire. The case is equipped with DVI-D, HDMI and DisplayPort x3 connectors. DirectX 12 and OpenGL 4.5 standards are supported, CUDA and Vulkan are available.Recommended for installation with a 500W processor. The number of occupied slots is two. Such a model of a video card costs 38,000 rubles.

Inno3D GeForce GTX 1080

• 16 nm process technology;
• high maximum resolution;
• suitable for 4k;
• signal feed to four monitors;
• large amount of memory;
• pretty quiet;
• there is a DVI port;
• high video memory clock rate;
• 256-bit bus;
• professional model, suitable for photoshop;
• support for DirectX 12 and OpenGL 4.5 standards.

• few occupied slots;
• high price.

Inno3D GeForce RTX 2080

The Inno3D Geforce RTX 2080 is a 12nm gaming graphics card that delivers a signal to four monitors and has a screen resolution of 7680x4320. The spare part is equipped with a GDDR6 memory type with a frequency of 14 GHz and a capacity of more than 11 GB. Cross Fire, SLI, DirectX 12 and OpenGL 4.6 are supported. In addition to the usual HDMI and DisplayPort x3 connectors, USB Type-C is also provided. Shaders version 7.1. There is Vulkan and, what else to pay attention to - CUDA version 7.1. The number of occupied slots, as well as installed fans, is two. The acquisition of this type of video card will cost almost 100,000 rubles.

Inno3D Geforce RTX 2080

• signal feeding to four monitors;
• high screen resolution;
• equipping with GDDR6 memory;
• large amount of memory Hyper Memory;
• wide functionality;
• a sufficient number of stream processors;
• almost silent;
• there is RAMDAC;
• optimal for the designer;
• the presence of the CrossFire mode;
• water cooling is provided;
• there is an HDCP port;
• support for DirectX 12 and OpenGL 4.6 standards;
• in addition to standard connectors, there is a USB Type-C and TV-out connection type;
• a new generation of shaders;
• the ability to work with Turbo Cache mode;
• modern modification of CUDA version 7.1.

• two fans;
• high price;
• two working slots.

Inno3D GeForce RTX 2070

Inno3D Geforce RTX 2070 is a modern card with highlighting elements. 144 texture units. DirectX 12 and OpenGL 4.5 standards are supported. The technological process is 12 nm. The shader block frequency is 6.0. Video memory type GDDR6 with a capacity of 8 GB. 256-bit bus, four connected monitors. HDMI, three Display Port outputs, USB-C. The screen has a maximum resolution of 7680x4320. There are two connectors for additional power. The number of occupied slots is two. The cost of the model is 41,000 rubles.

• presence of illumination of elements;
• shader frequency 6.0;
• equipped with advanced GDDR6 video memory;
• sufficient amount of memory;
• connection to four monitors;
• three Display Port and USB-C outputs, in addition to standard connectors;
• high screen resolution;
• sockets for additional power supply.

• does not apply to Low Profile format cards;
• two working slots.

Inno3D GeForce GT 730

Inno3D GeForce GT 730 is one of the most budget cards of this line with a maximum screen resolution of 4096x2160. This design supports OpenGL 4.4 and DirectX 12 formats. Technological process is 29 nm. 16 texture units, 5.0 shader frequency version. Video memory type DDR3 has a capacity of 1 GB. 64-bit bus. Can connect to three monitors at the same time. There are HDMI, VGA (D-Sub) and DVI-D outputs. Designed to work with a 300W power supply.Cooling type - passive, Low Profile format. There are two occupied slots. Such a card costs 4,000 rubles.

Inno3D GeForce GT 730

• low price;
• support for major formats;
• 5.0 version of shaders;
• connection to three monitors;
• availability of HDMI, VGA (D-Sub) and DVI-D outputs;
• low profile format.

• small amount of video memory;
• passive type of cooling;
• 64-bit bus;
• two slots.

Before purchasing a video card for your PC in 2022, you should decide which company is better - for this you need to carefully study the rating of quality modifications and the description of similar products. Currently, the computer electronics market has a lot of components for working on the basis of the NVIDIA graphics accelerator. This article lists the most popular models of Inno3D video cards, their cost, advantages and disadvantages, as well as tips on how to choose the most suitable one.