Ranking of the best hand mixers in 2022

In the process of construction or repair, the tool used plays an important role. Among other works, it is often necessary to mix various kinds of mixtures and solutions; in this case, manual construction mixers come to the rescue. We will tell you below how to choose a suitable mixer, what criteria to evaluate in the first place and how not to miscalculate with the selected unit.

Specifications of Hand Construction Mixers

How to choose a more practical device and not miscalculate the price? It is necessary to know the functionality of the model, what is more important and what is not for the planned types of construction work.

Power

This is the main parameter of the mixer, and the average price mainly depends on it. A powerful mixer can mix more mortar or thicker mixtures in less time. But it consumes more energy, a high power supply network is required, extension cords must be rated for more current. And the device itself is more bulky. Therefore, they try to choose the optimal engine power.

Max RPM

Liquid solutions are mixed at high speeds For viscous and thick formulations, devices with a lower number of revolutions are suitable. High-speed mixers stir well, forming a more homogeneous mass. For a wider range of applications, 2 or more speed mixers are used.

Speed ​​control and reverse

During the preparation of a putty solution or mixture, some builders use the method of gradual stirring. By adding water or powder to the composition and bringing the solution to the desired consistency, they use a decrease or increase in the number of revolutions. To avoid splashing at start, the engine soft start system is used. For various types of stirring and the convenience of pulling out the whisk from the finished thick solution, a reverse is used.

Number of speeds

There are single speed mixers for simple jobs. They are produced mainly with or without a gearbox.But in the case of using a mixer for various types of various works, multi-speed ones with a gearbox are used. All this affects not only the price of the device, but also the durability of components and parts. The presence of a gearbox implies an increase in the engine speed reserve. And if it is brushed (mostly mixers are equipped with this type of motor), then the motor brushes fail earlier. Typically, these mixers are equipped with additional sets of electric brushes. The design of the device should be easy to replace this part of the mixer.

The best construction mixers in 2022

Mixer BOSCH GRW 18-2 E

The advantages of devices of the brand Bosch, Germany, are evidenced by many years of experience in the operation of products. And although many stores do not have this brand on sale, this is not due to a lack of proper product quality, but most likely to delivery obstacles. And high prices for goods are problems with imports. But still, if we recommend the best equipment, then Bosch is the undisputed leader in this product line.

 

The construction mixer BOSCH GRW 18-2 E is an improved model of the brand Bosch GRW 11 E Professional, which is no longer in production. And if the predecessor won the trust of users, then even more so the new model. Instead of a handle, it has a reinforced frame with two handles. Single, with one whisk.

Its power is 1,800 W with a maximum speed of 1050 rpm. It has a two speed gearbox. The device is equipped with electronic engine speed control. Reverse is missing. Threaded type cartridge M14. The set includes a mixing basket 160 mm in diameter.

The weight of the device itself: 7.2 kg. Average price: 31,500 rubles.

• powerful and reliable machine;
• during speed switching, it is not necessary to tighten the spindle;
• has high durability;
• can be used as a powerful low speed drill.

• not the same quality compared to the previous model Bosch GRW 11 E Professional.

Mixer Makita UT1305

Since its inception, since 1915, the Japanese company Makita has been producing electric motors and generators. The richest experience in the manufacture of products of this kind affects its high quality and durability. Hand tools of this brand are in special demand among users.

Drill-mixer UT 1305 from Makita is single-speed, has a soft start. Power - 820 W, at a rotation speed of 1,300 rpm. Cartridge brand - M12. The cable length is 2.5 meters. Overall dimensions: 942 × 152 × 87 mm. The package comes with 2 extra keys and a side handle.

Designed for mixing building mixtures of concrete and putty, as well as glue, varnish, paint, etc. And also for drilling metal, ceramics, wood and plastic, and other hard surfaces.

Drill mixer weight: 3.2 kg. Price: from 9,490 to 13,990 rubles.

• lightweight and ergonomic;
• copes well for mixing a mixture of concrete with sand on a screed, mixing the mortar with high quality.

• expensive.

Mixer Fiolent MD1–11 E

The Fiolent plant is a giant of the Crimean state defense industry. And as you know, it is the defense industry of Russia that has always been famous for its unsurpassed quality.

A full-fledged hand mixer Fiolent MD1-11 E has a 1,100 W electric motor.There is no cartridge in the delivery set, but when using it, the device can be used as a drill. The body is made of plastic, the gearbox is made of metal, aluminum alloy, which contributes to good engine cooling. Especially during prolonged work under load.

The mixer is equipped with a special metal handle-bracket, which has such a shape that no matter how you put the device, it will lean on it. If desired, you can purchase a special rack, turning a hand mixer into a stationary one.

The start button includes speed control. With light pressure, the device turns on at minimum speed, with full pressure - engine speed is maximum. In any position, this button can be fixed with a side locking button. The maximum possible number of revolutions is set by the regulator on the start button in the form of a wheel. It is about 600 rpm. Electronic speed control, spare electric brushes included.

To fasten the rim, the most popular internal thread of the M14 spindle is used. The weight of the device is 4.7 kg. Average price: from 3,346 to 3,512 rubles.

• powerful, reliable, mobile;
• excellent build quality;
• perfectly kneads thick, viscous mixtures;
• inexpensive;
• can be used as a drill.

• the nozzles are strongly tightened by themselves, 2 keys are needed for replacement.

Drill mixer Elitech MS 1600/2ED

The LIT Trading company has appeared on the Russian markets since 2008, producing products under the Elitech trademark. Factories for the production of goods under the leadership of this company are located in China, as well as in Belarus. All products of the corporation are certified according to ISO 9001.An invariable advantage is the fact that this company has opened more than a hundred service centers for the maintenance and repair of equipment in Russia, which makes it easier to search for components and parts with the Elitech trademark.

The two spindle hand mixer has a power of 1600W. It is designed for mixing concrete, glue, paint and other mixtures. Low speed combined with high torque allows you to work for a long time under heavy load, stirring the composition well.

To save working time, a quick-release fastening of nozzles is provided. Also, the fastening and arrangement of the electric brushes of the motor is implemented for their quick and easy replacement.

The gearbox is made of metal for reliability and good cooling during long-term, as well as peak loads. At the same time, its internal elements are reliably protected.

There are 2 speed modes: 540 rpm and 790 rpm. The switch is mechanical, mounted on the gearbox. Smooth adjustment of speed is made by the power button, depending on the pressing force. The lock button can lock the desired position of the power button. Threaded connection of the nozzle with the M14 mixer.

The device weighs: 7.6 kg. Average price: from 6,100 to 7,169 rubles.

• convenient and powerful;
• adequate price.

• decently noisy;
• initially unpleasant smell of plastic.

Drill mixer Rebir EM-1450E and Rebir EM 1450 E-2

The company Rebir, Latvia was formed back in the Soviet 70s. It cooperates with the largest manufacturers in Europe and Asia. At the moment it is one of the most dynamically developing companies. The products are ISO 9001 quality certified.

Mixer Rebir EM-1450E, as the name implies, has a power of 1450 watts. Gives out 500 rpm. at maximum engine speed. Speed ​​adjustment is made by the inclusion button with a clamp. Mounting threaded M14. The package includes a whisk and additional carbon brushes.

It should be noted that the Rebir EM 1450 E-2 mixer has a mechanical speed switch in the gearbox. The first position of the switch corresponds to 650 rpm. at maximum engine speed. In the second position, you can get up to 1,000 rpm.

These mixers are designed for mixing plasters, sealants, adhesives, varnishes and paints. As well as other similar materials. Ergonomic handle according to user experts is very comfortable to use and much safer. The switch is dustproof.

The aluminum alloy gear housing increases the service life and contributes to good engine cooling under long-term loads. The mixer uses a three-stage gearbox, so it has a large output torque. The engine speed control is electronic, the controls of which are located in the power button.

To protect the plastic handle from breakage during falls and transportation, 2 steel strips are used, fixed along the edge of the handle. It is possible to use various configurations of nozzles, which are easily and quickly replaced. It is also possible to install the device in a stationary position, the diameter of the neck is 59 mm.

The mass of any of the devices is 4.3 kg. The price of a single-speed one is 6,435 rubles, and a two-speed one is 7,194 rubles.

• great device;
• powerful engine;
• Very well made, easy to use.

• inconvenient location of the power cord, sometimes interferes;
• noisy.

Mixer Scheppach PM1800 D

The Scheppach plant is located in Germany, in the city of Baden-Württemberg. It not only develops and manufactures equipment and instruments, but also tests new products. All products of this company have a quality certificate of DIN EN ISO 9001-2008.

Universal duplex mixer Scheppach PM 1800 D with two blades moving counterclockwise. Spindle thread - M14. It copes with long work when mixing concrete with crushed stone or sand. It also stirs any finishing and building materials that need to be mixed. If necessary, you can use one nozzle without tripping protection.

Engine power is 1.8 kW. The metal three-stage gearbox has a 450 rpm speed switch. and 790 rpm. at maximum engine speed. This provides high torque.

The engine speed controls are located on the opposite side of the instrument handle from the power button. Speed ​​control electronic. This type of adjustment allows you to maintain the stability of the engine speed in any vibration. And also provide a smoother and more convenient adjustment.

The air cooling system of the engine ensures its reliable operation in various conditions. In combination with a metal gearbox, the motor has good heat dissipation. Air intakes are located on the opposite side of the gearbox and spindles, which prevents splashes from entering them.

Weight of the device: 7.5 kg. Price: 10 469 rubles.

• powerful and convenient;
• almost no vibration is felt.

• Not found.

Mixer Eibenstock EHR 20/2.5 S

The line of power tools of the German manufacturer, the company Eibenstock, includes many items, the range of which is constantly growing. Products are exported to all countries of the world and are in demand.

The Eibenstock EHR 20/2.5 S mixer with a two-speed gearbox is designed for mixing up to 50 kg of building mixtures, medium and high viscosity. It can be used to mix potting compound, leveling compound, cement or ready-mixed mortar. As well as plaster or screed material.

For effective protection against dust, stones and dirt, as well as water splashes, a special cover with labyrinth guides is installed. The two-speed reducer qualitatively provides the choice of optimum speed for different viscosity of solutions.

The metal H-shaped handle perfectly protects the device during transportation and fits comfortably on the floor. At the same time, the handles have rubber tips that protect against injuries. The soft start system protects against jerking and splashing of the mixture at the start. Spindle thread - M14.

The power of the Eibenstock EHR 202.5 S mixer is 1,300 watts. The speed is shown in the table:

Speed ​​switch position	Rated frequency, rpm	Idling frequency, rpm
1	250	400
2	450	730

The construction hand mixer weighs 5.1 kg. Price: from 30,290 rubles.

• extremely hardy tool;
• housing made of impact-resistant material;
• advantages of soft start.

• not high enough speed at 2nd speed;
• high price.

Mixer Skil 1609 LA

Skil Corporation is currently the largest manufacturer of power tools in the world. In the markets of Europe, this brand occupies 5%, and in the USA, the home of the company, as much as 18%. When developing a tool, the company focuses on simplicity, quality and reliability of products. And, judging by the demand for products, she succeeds.

The easy-to-use Skil 1609 LA mixer is designed to prepare various mixtures from any component. With it, you can mix both cement plasters and adhesives, paints and mortars.

The power button is combined with an electronic engine speed controller. And it is held in the desired position with a locking button. Engine power is 1 kW. The idle speed reaches 700 rpm.

The metal case of a reducer provides a good heat dissipation and reliability of work at big loadings. It is also not subject to thermal damage.

The simple and ergonomic handle with soft rubber grips ensures comfortable use. The package includes a support handle, a universal whisk 120 mm, a hex key. The spindle thread is standard - M14.

The maximum torque is 40 Nm. Vibration level less than 2.5 m/s². Sound pressure level 89 dB(A).

The mixer weighs 3.4 kg. Price: 5 767 rubles.

• simple and compact.

• Not found.

Mixer Caliber ERMD-1600-2E

Russian representatives of the Kalibr company, whose production is located in China, break the stereotypes of buyers' thinking about the quality of goods from China. Many retail chains prefer this brand precisely because of the quality of the products.

Manual two-spindle mixer Caliber ERMD-1600-2E, judging by the name, has a power of 1.6 kW. The metal gearbox has a spindle speed switch.

The first speed is from 200 to 550 rpm, the second from 140 to 380 rpm. Slower rotation is not needed, so the adjustment band is more stretched, which is very convenient. The internal thread of the spindle is M14. Electronic adjustment has a separate control, smoother, not combined with the power button. A special button is provided for fixing the switching lever.

The mixer handles are reliably protected by a U-shaped metal bracket, which protrudes much further than the handles. Thus, the bracket is a device for working together, as well as additional protection of the hands from possible injuries during operation.

Weight: 8 kg. Price: from 4,350 to 5,990 rubles.

• high quality and reliable;
• good budget option
• powerful and not expensive.

• Not found.

Mixer Zubr ZMR-1200E-1

The Russian manufacturer Zubr OVK is very popular among users of high-quality power tools. The company focuses on product reliability and high ergonomics.

The Zubr ZMR-1200E-1 hand mixer is designed for professional use. With it, you can prepare various building mixtures. Stir the paint, adhesives of various viscosities. Prepare cement mortars, putties and plasters. The maximum mixing volume is about 120 liters.

The mixer has a common method of fixing nozzles with M14 spindle threads. Handles have antiskid, soft slips. The engine power is 1200 watts.

The metal case of the gearbox has good heat dissipation, durability and strength of the gearbox. The gearbox has an engine speed switch. The maximum frequency in the first position is 620 rpm. In the second - 810 rpm.

The power button, consisting of an electronic speed control control and a lock button, provides a smooth start of the engine. Thus it is possible to avoid splashes when stirring mixtures.

Weight of the device: 5 kg. Price: from 4,859 to 6,330 rubles.

• operated for a long time on all types of construction repairs;
• reliable and compact;
• inexpensive.

• None.

Guidelines for purchasing a hand mixer

Since the principles of operation of the mixer are similar to an ordinary drill, when choosing power, they are guided by the amount of work. The number of revolutions per minute is selected based on the viscosity of the prepared solution. In the case of working with various types of solutions, a mixer with a two-speed gearbox is used.

Narrow specialists, such as a painter, plasterer, stove-maker, use a compact, single-speed, small-sized, hand mixer. More generalists use two or more speed mixers, with one or two beaters. Some manufacturers specifically classify their product by use.

Crew builders use powerful and multi-speed mixers. Or buy several devices with different characteristics. In addition to powerful devices, compact low-power tools can also be available, which is especially convenient when teams work at various sites.

Usually builders prefer to purchase tools from one manufacturer.But for the sake of familiarization, you can try using new models. A wide base of power tools is presented in the markets of online stores.