The motherboard is the main component for a PC. It must have an acceptable number of required connectors so that the user can install a powerful graphics adapter. In addition, you need to focus on the need to connect different peripherals. This article provides a ranking of the best motherboards of 2022 to help you make your choice.
Content
Before choosing a device, you need to figure out what to look for. Experts advise to focus on such characteristics:
At the moment, the niche of motherboards is replete with manufacturers. Below are the best manufacturers of PC peripherals.
This brand is considered to be one of the largest manufacturers of equipment on the planet, in particular gaming products. AsusTek manufactures not only these components, but also many other electronic type equipment, very famous all over the planet.
Motherboards of this brand received the highest ratings from various specialized media. If the user needs a device that uses the most innovative technologies - this is Gigabyte.
The company was opened a long time ago, and during this time it has managed to position itself as a company that manufactures some of the best motherboards. Equipment in terms of quality and stuffing can compete with such industry giants as Gigabyte and Asus, but the popularity of the latter models is determined by their affordable cost.
This is a subsidiary of Asus, which was launched in 2002. It manufactures motherboards and industrial personal computers. The company some time ago entered the race of the largest manufacturers, and is making unimaginable progress in its own improvement.
A competent choice of a system device is the most important criterion for assembling a personal computer. If a chip in one socket can be replaced with a faster one if desired, it is allowed to increase the amount of memory, change the video graphics adapter, then the motherboard, as a rule, is in the system unit until there is a need to make a significant update or until a serious malfunction occurs.
Thus, the device should be bought with a margin for long-term use. Although, Intel's generally recognized "passion" for constantly changing processor sockets without backward compatibility already means that even a modest update forces the motherboard to be replaced immediately with the processor.
In this regard, the conservativeness of AMD Corporation looks logical. One need only recall how durable the AM3 socket was, which is only today being replaced by the incompatible AM4. By the way, there are all the reasons that the new assembly for Ryzen will still be updated on the same motherboard.
This category contains the cheapest devices for users with a limited budget.
Based on the AMD A320 chipset, the motherboard is designed to install AMD AM4 chips. The motherboard will be a good solution for building a personal or work PC.
The system unit inside which this board will be installed will easily pull all standard programs, including video players, text and spreadsheet editors, as well as browsers for working on the Internet.
Fans of computer games will like the possibility of installing a graphics card. This feature is provided by a PCI-E x16 slot. 1 PCI-E x16 slot will give the user the opportunity to start using expansion boards, especially controllers for various functional purposes.
Two slots for DDR4 are designed for mounting 32 GB of RAM. High-speed memory blocks are supported: the maximum allowable frequency is 3200 MHz. The model meets the Micro-ATX form factor. Boards of this standard support most of all cases known today.
The height and width parameters of the model are 226x187 mm. The motherboard package includes:
The cost is 3,250 rubles.
This model is a worthy example of the Asus line, which, despite its budget price, meets the quality and durability requirements of this brand. For a very small amount, the user will receive an innovative motherboard that supports all types of processors from Intel (up to the Core i7 / i5 / i3 / Pentium and Celeron lines).
Of course, it makes no sense for the user to expect any auxiliary and unusual slots, impressive overclocking and other exciting “highlights” from it, but almost any chip can be easily installed on this model, and it will function with the same speed as on other, expensive devices. .
The same applies to the video card. Due to the presence of USB 3.0 and SATA-6 GB, the user can connect fast SSDs and USB drives. The disadvantage of the motherboard is the uncomfortable placement of the audio output - it is very close to the video graphics card connector, so sometimes (if the graphics adapter is large), it is not possible to use HD Audio.
The cost is 2,800 rubles.
Cheap motherboard, dimensions of which are 191 x 188 mm. This is an extraordinary model that supports 2 DDR4 DIMM memory slots. In addition to dual-channel memory, there is 1 PCI-E slot. It will not be superfluous to highlight that the video outputs function only if the processor contains a graphics core. The form factor is made according to the Micro ATX type. There is no integrated controller. Anyway, the sound is provided by Realtek's HAD ALC887 codec. It is allowed to install no more than 32 GB of RAM.
The cost is 3,000 rubles.
The 2nd place in this top of the best inexpensive motherboards rightfully goes to this model on the LGA 1150 socket. BIOS.
This model has a Micro-ATX form factor, which, of course, is an advantage, since it can be placed in almost any system unit of a work or personal PC in place of the previous one. The presence of an innovative HDMI port for connecting a display is highlighted by buyers among the advantages of this motherboard. You can even connect HD TV.
The model features a comfortable placement of 4 USB 2.0 slots on the rear panel, which makes it possible to practically connect 4 main gadgets at once - an MFP, a joystick, as well as two ports for a keyboard and a mouse.There are also 2 USB 3.0 sockets on the back with a fast transfer of information of approximately 5 Gb / s, which are paired with a network adapter. But to the minuses, users added that it does not have internal USB 3.0 connectors and their minimum number in general.
Among the other advantages, it is worth highlighting the Russian-language BIOS and control over the graphics manipulator with the mouse.
The cost is 2,700 rubles.
If the user wants to buy a new motherboard for work or his own PC, then this model will be the best solution for the price offered by the manufacturer.Its peculiarity lies in the presence of the required number of USB slots for connecting no more than 8 peripheral devices - a printer, graphics control gadgets, a scanner, input gadgets, electronic boards and drawing accessories.
The ASUS brand equipped this board with an innovative high quality HD 3000 core. This video graphics processor transmits an image in HD resolution to the display. A definite plus is 4 Serial-ATA slots for connecting a floppy drive and a hard drive. From now on, if another HDD is needed, the user can purchase it and easily connect it to one of the available SATA slots.
The cost is 2,800 rubles.
The LGA 1150 connector is designed to replace the LGA 1155 and is aimed at most of the innovative chips. Today, the number of products with such a socket is large. The advantage is that motherboards are well suited for assembling not only working, but also gaming PCs. They also differ in reliability and nimbleness.
The high-tech model, made in the ATX form factor, stands out from the competition with incredible computing and switching characteristics. The LGA1150 socket is designed for mounting 2 or 4-core Core I3 / I5 / I7 Generation 4 chips from Intel Corporation. They show unsurpassed speed (about 3.7 GHz).
32 GB of 2-channel DDR3 RAM (4 DIMM 240 pin) with a clock frequency of 1333/1600 MHz help to process information efficiently.
Important! L3 Cache - 8 MB.
This versatile model is a great choice for building the workstation you need to compute the most demanding industrial automation tasks.
Intel's latest vPro technology gives you the ability to control your PC from a distance, even when it's turned off.
The cost is 23,100 rubles.
An ATX format model that lacks various stylish heatsinks on power circuits, fashionable textolites, backlighting and other “bells and whistles” that are useless for miners. To connect the power, the model has 24pin sockets, for the chip - 4pin sockets.
Such switching parameters are enough to start the motherboard, however, the manufacturer decided to play it safe and added several connectors for auxiliary power supply of PCI-e slots (there is a 6pin socket for a connector from a graphics card and Molix).
The model comes with a BIOS battery.At the back, there are HDMI and D-Sub outputs, as well as 1 gigabit LAN and an audio jack positioned by the manufacturer as 8-channel.
The chip is powered through a 4pin socket. The model has holes for the CPU cooling system for both 1150, 1151, and 775 sockets, which allows you not to spend money on additional cooling.
The cost is 2,700 rubles.
The third position is deservedly occupied by this model. It should be attributed to the most sold samples equipped with the LGA1150 socket from Intel Corporation. The average price of the board is quite low, which is why it is in demand. This is a great solution for users who want to save money and at the same time build an excellent multimedia system for a personal or work PC.
All outer shells have high-quality protection, the panel is made of steel materials that are not subject to corrosion. The motherboard is ideal for the job, as the manufacturer equipped it with COM and LTP slots. In this model, the cooling system is based on high quality solid capacitors that provide durability even under dangerous temperature conditions (no more than 105 degrees).
The performance of USB shells is improved by up to 170 percent while interfacing with any suitable peripheral gadgets, since they support the UASP protocol. From the side of control and configuration, everything is fine - even a novice user can understand it. Al Suite 3 software stands out for its lightness and rich functionality.
The cost is 3,700 rubles.
MSI has taken advantage of all the best developments in manufacturing this motherboard. They put as many ports as they could on this compact model. 4 RAM slots help increase this parameter to 32 GB.
There are 6 included SATA ports that allow you to connect a large number of HDDs. However, with a speed of 6 Gb / s, only 4 of them will function. But the most interesting thing is that the model has CrossFire technology that can fit 2 ATI Radeon video graphics adapters inside the PC shell. This motherboard is based on the LGA 1150 socket.
The cost is 5,000 rubles.
This model is another exciting product in the ASUS brand series. Its main advantage is that it stands out for its chic performance characteristics at a very inexpensive cost. It is easy to create both a fast gaming PC and a personal multimedia center based on this model, because thanks to the compatibility with the integrated graphics core, the motherboard supports UHD 4K format and has high-quality sound.
Instead of an ordinary BIOS, the board is equipped with an innovative UEFI interface, the comfort and clarity of operation of which, in fact, are good helpers in system configuration.Many SATA slots make it possible to synchronously connect all peripheral devices (SSD, hard drives, etc.) necessary for work. Of the minuses of this motherboard, it is worth highlighting only 2 connectors for RAM, which, one way or another, is quite normal with practical dimensions.
The cost is 4,000 rubles.
Devices with an LGA 1151 socket are an attractive purchase for users who want the ultimate in performance from their PC. Taking from previous models a comfortable chip installation system, innovative products have added support for DDR4 type RAM and excellent overclocking capabilities.
The model is designed to assemble a powerful workstation or PC for a gamer. It is based on the B365 of Intel Corporation, therefore chips of the same company (LGA 1151v2) are suitable. It is allowed to install no more than 32 GB of DDR4 RAM with a frequency of no more than 2666 MHz.
2 PCI-E x16 slots are provided. To protect against electrostatic voltage, the motherboard has chips with a margin of safety that is 3 times better than basic ICs. This qualitatively protects the model and its components from malfunctions that can be caused by the effects of electrostatics.
The motherboard is equipped with 8-channel audio based on Realtek's ALC887 chipset. There are three analog audio jacks on the rear panel. There are also 1 M.2 socket and a gigabit Ethernet port.
The model meets the Micro-ATX form factor, and the dimensions of the motherboard are 244x185 mm. Special microcircuits protect the motherboard and the entire PC from power surges and power overload, during power outages. Connection to the resources of the Network is carried out by means of a gigabit network adapter. Lighting provided.
The cost is 6,000 rubles.
The ATX model starts this category of top motherboards for creating systems that do not require many features: the maximum permissible memory frequency is 2666 MHz. By the way, the support of CrossFireX technology indicated in it is considered only as “to be”. The fact is that the second x16 port has only 4 lines. At first, the motherboard only supported the 8th generation of chips from Intel, however, by upgrading the BIOS to version 0904, the user will get the chance to install even the i9-9900K.
Taking into account the lack of overclocking potential, its 6-phase power subsystem is rather weak, however, on “factory” chips with a TDP of 95 W, it copes with its goals, and the temperature of the radiators is kept at a normal level.
Although there is sound with capacitors from Nichicon and advanced track editing, however, on the ALC887 codec, its potential will suit the user only if he is not too picky about sound capabilities. It is uncomfortable to connect multi-channel acoustics, but there are enough slots for an ordinary set of a pair of speakers and a subwoofer.
The cost is 8,700 rubles.
This board, when compared with ASUS' Maximus VIII HERO, makes it possible to create a real gaming system with a relatively small investment. The main "highlight" of the model is a lot of slots: for gadgets that support USB 3.1 there are as many as 8 of them, and for SATA - 6 (the bandwidth of each is 6 Gb / s).
It is allowed to install DDR4 RAM with a frequency varying within 2130-3600 MHz. For this, 4 ports are provided, which allows you to equip your own computer with approximately 64 GB of fast and energy-efficient RAM. The Realtek integrated sound processor should be added to a number of advantages - most of the manufacturers of expensive motherboards do not equip their models with it.
In general, this model is not much inferior in terms of hardware potential to the same MaximusVIII HERO from ASUS, providing the latter with a solid cost advantage. It's all about passive cooling: at the maximum load of the computer, the motherboard from ASUS gives a noticeable decrease in performance.
The cost is 3,300 rubles.
It is worth noting that not everyone needs full-size ATX boards, and even gaming lines. In this case, it is worth considering this particular model - a MicroATX motherboard, at the same time, at a very adequate cost.
But it can function even with not the weakest chips: after all, 6 power phases, 4 of which are located under the aluminum heatsink, are not so bad. 4 slots for DDR4 make it possible to install a sufficient amount of RAM, according to today's criteria, with a maximum frequency of 2400.
Another positive feature is an excellent sound path. Despite the fact that the jacks here are of an exclusively analog type, in addition, they are also multiplexed (in other words, 5.1 mode), you will have to be left without microphone and line inputs located, as a rule, behind. But, ELNA capacitors are installed in it, as the inscription on the plastic frame majestically says. In general, the sound here is good for most users with a good amplifier and high-quality acoustics.
The disadvantage of the micro-standard is the reduced number of ports: there are few USB, and 2 video graphics adapters are supported only fictitiously. First, there is no SLI support, and second, the additional slot is located very low. In addition, a massive video graphics adapter in the top slot will block the PCI-Ex1 port.
The cost is 5,500 rubles.
A solid leader in the ranking of the best motherboards for gaming is occupied by this innovative model of the Gaming M5 series.It absorbed all the advantages of its predecessor (it is worth noting that the Z170A was also a 100% sales hit for a long time) and is equipped with a large number of new ones. At the same time, the motherboard should be classified as inexpensive, taking into account similar models that are comparable to it in terms of internal components.
So, it offers users support for any chips that are sharpened for the LGA 1151 connector, and all DDR4 RAM blocks, including a frequency of 3800 MHz, two Turbo M.2 ports, a very good quality sound card (due to Audio Boost 4 with support for Nahimic) and 3 video card slots.
There is incredible potential for overclocking, and there is no need to have any professional experience - all the necessary software is included. In addition, the model also has a beautiful design, which, of course, will appeal to fans of controlled backlights and colorless shells.
The cost is 11,000 rubles.
The FM2+ socket was, in a way, AMD's response to Intel's release of the LGA1150 socket. These options are connected by 2 characteristics: versatility and budget cost of devices based on them. As a bonus for users, there is a proprietary AM1 slot that provides compatibility with new generations of chips.
For more powerful options, the AM3 + socket was presented, which was more aimed at creating productive settings for rendering videos and games. Motherboards with it are not equipped with integrated graphics, but they have the potential to overclock the CPU and RAM.
The combination of these aspects made it possible for the company to significantly increase its own part of the market and form a platform for the most diverse modifications: from inexpensive office to productive gaming. An incredible step by AMD Corporation, when one socket is used both for inexpensive A4 and A6 (excluding the Athlon series), and for the relatively high-performance A8 and A10.
The presence of integrated video processors in FM2 +, which can even cope with many games, has become a significant plus.
The model has support for Crossfire technology, which makes it possible to significantly increase PC performance by installing 4 graphics cards at once. 4 DDR4 slots make it possible to install no more than 64 GB of RAM, due to which, on the basis of this model, it is possible to “build” a productive gaming station.
The motherboard is equipped with 6 SATA3 interfaces at once, which will make it possible to install the same number of hard drives in a PC. Thanks to SATA RAID technology, hard drives can be combined into an integral array, which will simplify the installation of heavy games of the new generation.
The cost is 9,250 rubles.
The overclocking potential here is less than what users expect from the motherboard on the B450 - the manufacturer says that RAM frequencies are only supported no more than 3200 MHz. Considering how positively Zen and Zen+ respond to higher operating RAM frequencies, this is a little disappointing.
If a user-purchased M.2 drive heats up excessively during active use, then Gigabyte's decision to equip the device with a heatsink with advanced fins undoubtedly goes to the treasury of advantages. But it would be nice to make the device larger - the usual fixation positions on the right in the shell do not reach it, which is why the edge “hangs” in the air.
Considering the rather thin material, it will require care when connecting the 24-pin and SATA ports. The 8-pin slot for powering the chip is clamped in a cramped place between the casing and the radiators, it is uncomfortable to connect the power supply, as well as to screw in the fixing screw located nearby.
In general, the motherboard, of course, is quite attractive for an innovative assembly, and only the shortcomings described above do not allow it to rise higher in this top.
The cost is 8,000 rubles.
This is the most budget board in the top, which is built on the popular 970 chipset model from AMD. It will delight users with a good match between cost and features. Despite the noticeable positioning as inexpensive, it has enough slots: there are 6 for SATA, 16 for USB, 4 of which are 3.0 format. There is also CrossFireX technology: the motherboard has 2 fast PCI Express x16 slots for installing external video graphics cards.
Even among all the models described in the top, this one makes it possible to install RAM with a maximum operating frequency of 2133 MHz, but without overclocking potential.
The cost is 4,000 rubles.
Board based on the 990 FX chipset from AMD Corporation, which allows you to create extremely powerful configurations in its own class. Of course, there is support for the operation of several graphics adapters (SLI / CrossFire), despite the fact that the maximum memory frequency is limited to only 1866 MHz. A wide range of modes with PCI-E bus should be added to the list of undoubted advantages. The model supports overclocking of the central processor, RAM and the frequency of the video graphics core, which makes it a very interesting solution for players with a limited budget.
A special nuance is the many ports. There are 12 USB slots on the back (and their total number is already 18 pieces). 4 of them support the innovative nimble 3.0 format.Broadcast digital audio signal via S / PDIF is also provided by the manufacturer. The motherboard was also not deprived of SATA slots - there are 6 of them, each of them has a bandwidth of 6 Gb / s.
All in all, this model is somewhat of an unshakable option for AMD chips, offering the ultimate range of capabilities and having a worthwhile price/technological match.
The cost is 10,000 rubles.
If a user is building a computer based on the popular Zen + generation chip, then it is reasonable to buy the most suitable chipset for it. This means that the user needs an X470 motherboard, and it is the ASUS brand that provides them with a solution with a pleasant balance of cost, quality and features, improving the previous “Prime” with the X370 chipset, and in addition equipping it with an additional M.2 port.
Low-profile type heatsinks near the chip connector do not limit the choice of fan for it and, in addition, perfectly implement cooling of an accelerated chip without auxiliary tricks. The power supply is made on the ASP1405I controller, which is designed for a 6 + 2 phase circuit, however, the last 2 on the motherboard are made with doublers, and therefore, in fact, there are 10 phases.
The overclocking of the Ryzen 7 2700X on the motherboard is well done, despite the fact that Zen + has not become very advanced in terms of increasing operating frequencies.The heatsink for the SSD is also made in the same style as the VRM, which is installed in the upper M.2 port, while the contact area of the thermal shell is solid, and therefore it makes sense to hope for excellent cooling of the media.
In general, the improvement of this model from the ASUS brand on an innovative chipset turned out to be good, and its experts advise with confidence for building a new PC on any Zen + chip.
The cost is 14,000 rubles.