Best Rebir drills in 2022

The ranking of the best Rebir drills of 2022 is aimed primarily at people who are professionally involved in construction, repair or decoration. The products of this company are very specific and are known only in certain circles. The plant consisted of two workshops and was originally conceived for the production of power tools. The number of production facilities has increased since then, and with them the range of products has expanded.

The products of this plant received their popularity for their quality and reliability. The consumer receives a professional tool at a reasonable price. The cost is an order of magnitude lower than the competitive one while maintaining quality and functionality.

Overview of the IE-1023 series on the example of the drilling tool model IE-1023M-16/1700

It is a continuation of the IE-1023A-16/1300 series, the electric motor power of which has been increased by four hundred watts. This is evidenced by the index number in the name: series, cartridge diameter and drive power. In fact, the developers took an existing drill and supplemented the drive with increased torque, leaving the rest of the characteristics unchanged.

A hand drill is designed for mechanical drilling and reaming of all types of surfaces: plastic, concrete, steel, wood and any others. The chuck is designed for drill diameters from 14 to 23 mm. When using a special adapter, the device can be used as a special tool for mixing paint, glue and various solutions.

The unit is equipped with a 1700 watt drive with increased torque and an increased number of revolutions of 1000 rpm (in the prototype, the drive had only 1300 watts of power and 650 rpm).

The body of the machine is made of aluminum alloy, which reliably protects the device as a whole from accidental shocks and damage. The rubberized areas improve the ergonomics of the handles and absorb vibrations. The side handle is attached on both sides, which improves its versatility and suitability for both right and left handed use. The cartridge is installed standard with three cams.

The motor is equipped with a three-stage gearbox with a high spindle torque for this model. The standard handle has a special lock for continuous operation of the drive. Regulating brushes allow you to control the number of revolutions and work power. The chuck allows you to install a drill with a maximum cutting edge diameter for a steel plane of 23 mm and for a wooden one - 65 mm.

Equipment

Manufacturers included in the delivery:

• two handles for mounting on the side;
• cartridge with a diameter of 16 millimeters;
• mandrel for installing mixing whisks;
• wedge to remove the mandrel;
• two replaceable brushes;
• drills for metal and wood.

The average price of the entire set is about 10,000 rubles. However, the prototype costs 3,000 rubles less with a similar configuration.

Comparison table of characteristics of one series

Summary table of parameters

They are distinguished only by the power and speed of the electric drive, which is used for two models is different. The tools have the same equipment, so we can safely say that this is one piece of equipment.

• reliability;
• high quality;
• long service life;
• affordable price.

• lack of details in the public domain;
• there is no service book for the repair and maintenance of the tool;
• not all similar parts are suitable for replacement;
• lack of a gauge for blind holes.

Customer reviews of drilling machine models

The strength, traction and power of the equipment remains just on top. Compared to Chinese counterparts, this is just a machine-beast. We used a drill to twist the piles with the help of a special device, so it did not even warm up. Also, before using a tool of this brand, they burned two similar units from another company when they screwed self-tapping screws into larch. The material is so dense that even a drill does not take it, and the device heats up and eventually burns.

Rebir's car did everything with ease, without even noticing the obstacles in front of him. The power of the device is enough for almost all types of work. If the cartridge jams while drilling or tightening the screw, the electric motor will simply break the body or hat.

For such a tool of this quality, the price is simply ridiculous, since analogues of a similar assembly from other manufacturers cost three to four times more.Drills do not break for several years, they serve the owner faithfully. If, nevertheless, a breakdown occurs, then the parts are difficult to find, since there is no information on similar products.

Overview of the TRU series using the TRU-870/13ER drilling machine as an example

Perhaps the cheapest series of drills from the entire existing range of nomenclature. Tools of this class are designed for drilling holes in wood and metal materials. For concrete and bricks with less elasticity, shock mode is provided. The developers combined the functions of a drill and a jackhammer in one device. This affected the performance. For example, TRU-870/13ER has the highest drive power and RPM, which is 870 watts and 2000 min-1.

The car was equipped with good functionality. The side handle is installed in any position, which ensures the safety of work. The emphasis has a clamp and a ruler, which allows you to accurately make blind holes. The chuck clamp diameter is only 13 mm. This is less than that of professional units, but it is quite enough for housework. Three cam locks securely fasten the drill and do not allow it to loosen during the drilling process.

The drill has two modes: shock and unstressed. Also on the lower handle there is a spindle speed limiter. The reverse is located here and is made in the form of a flag. It is very convenient to tighten and unscrew the bolts with it. Stationary operation is provided by the lock button. The whisk of the mixer is not included, but the device allows its use with the help of a special nozzle.

The maximum diameter for the cutting edge of the drill is:

• for elastic materials, like soft woods and plastic - 40 millimeters;
• for non-ferrous metals, steel, building stone, brick and concrete - 13 millimeters.

The drill is intended exclusively for home use, where the amount of work is not so large.

TRU Series Specifications

• the presence of a reverse;
• the ability to adjust the spindle speed;
• affordable price;
• compactness.

The device meets all quality and reliability standards.

• insufficient engine power;
• limited length of the supply cable;
• lack of backlight;
• the package does not include a hard case for carrying and storage.

Customer Reviews

Not every drill from other manufacturers is ready to work with a full load for several hours. This machine can thanks to the 870 Watts of power from its engine and the provided speed controller. If the device starts to warm up, the master always has the opportunity to reduce the load. The tool needs breaks, but they are short-term and do not critically affect the progress of work.

For such weight and power, manufacturers could provide batteries and a charger for them. This would affect the price, but the parameters of the batteries could not be changed in any way. For 2800 rpm, a rechargeable battery is enough. Since the drill itself is light and low-power, it was logical to make it portable.An extension cord can solve the problem of mobility, but it is not always at hand.

In general, the drill turned out to be compact, convenient and not expensive. Each owner is able to afford to buy this particular model. In everyday life, large professional tools are rarely useful. Therefore, those who decide to acquire a drill and a perforator in one person should pay their attention to this particular series.

Model Overview IE-1206-16/2000ER Series 1206

According to the manufacturer, the bestseller is the IE-1206-16/2000ER manual drilling device. The drill has a chuck with a 32 mm drill clamp. This is closer to the professional version. It is designed to work with thick metals and concrete walls. The manufacturer's price is 10,500 rubles. Not much for a powerful tool.

On the main handle there is a flag for switching reverse and speeds. On the side is a continuous work latch. The rubber coating serves as a vibration compensator. The engine is equipped with a three-stage rotor and has a power of 2000 watts, which has affected the weight. It is not easy for an ordinary person to handle such a unit with one hand. It takes a lot of strength to keep her. To do this, there is a side handle, which is attached in all projections, providing convenience in all positions.

But with an auxiliary handle, there is no limiter for blind holes. It is not clear why manufacturers decided to abandon such functionality. The 1206-1 series does not have it either. They differ from each other only in the number of speeds. Why it was necessary to remove from one device, while maintaining the power of the engine and other operating parameters, remains a mystery. The gain in price and weight was negligible.

Technical description of models 1206

Drill specification:

• the presence of a speed controller;
• chuck with key;
• powerful engine;
• reliability.

The gadget is durable and easy to use.

• big weight;
• high price;
• insufficient functionality;
• no spotlight.

Customer Reviews

The tool has enough power to work in the most difficult conditions and with very hard materials. It is not suitable for roofing due to its weight, but that is not its purpose. The unit is designed to cope with thick concrete walls. Manufacturers did not provide it with an impact mode, which simplifies the process of drilling walls, but narrows its scope.

Many do not recommend using the machine as a screwdriver or wrench, as there is a high risk of breaking the bolt heads. Without special skills, the cartridge will jam, the speed of the gearbox will be enough to cut them off. The torque control regulator helps to reduce the load on the motor during long shifts when the tool has to work for several hours non-stop.

The device is especially popular with people involved in the construction and repair of residential premises. In this case, it quickly pays for its cost.

Review of cordless drill AUM5N-18-2, AUM series

Portable device with two replaceable batteries. It has two stages for changing the torque.The machine is designed for drilling elastic and non-dense materials, as well as for working with nuts, bolts and screws. Acquire it as a universal tool for housework.

The drill has a comfortable and ergonomic handle with a rubberized coating that compensates for vibrations generated during the drilling process. It is equipped with local illumination, a special plate to hold the screws. Next to the chuck is a rotary range adjuster. Also, manufacturers have added the functionality of enabling and disabling the impact mode. It is useful when working with concrete, but you should not count on the fact that it can be used to break through a thick wall. The length and thickness of the drill will allow you to make strobes or grooves for sockets with a depth of one brick.

AUM Series Cordless Drill Specification

• reliability;
• mobility;
• ease of use;
• cheapness;
• torque adjustment.

A portable drill is designed for autonomous operation without being tied to constant power sources. The instrument continues to operate while the spare battery is being charged.

• fast battery consumption;
• limited application;
• battery charging duration.

The drill is designed to work with parts such as bolts and screws.It is not rational to use it for concrete and thick walls, as it quickly consumes the charge capacity.

User Reviews

The tool is a versatile and convenient tool for working at home. With his help, a large amount of work was done. The facade of the house was sheathed with siding, furniture was assembled. The developers have tried and provided the device with a charge indicator, which helps to control the battery level and change it in time. If everything is done on time and correctly, then there are practically no interruptions in work.

Of course, this is not a professional device. Do not overload the device, otherwise the slots will fail and require replacement, which happened. However, after the replacement, the device continued to work like new and no longer caused problems. It should not be overloaded, then it will not cause problems.

Another problem that many buyers face is the discrepancy between the declared capacity and the real one. The elements themselves are of high quality, but they last for more than an hour. And after repeated recharging, their capacity decreases even more. This is a problem for many manufacturers, as sometimes a defect occurs in a supply batch. This does not cause big problems, but you often have to charge the elements.

Rating of the best drilling devices

The first place in the popularity rating belongs to cordless tools for their autonomy and versatility. As practice shows, their characteristics are quite enough to make home repairs, assemble furniture and their prices are quite acceptable. The manufacturer supplied them with impact properties for working with stone and concrete walls. But the chuck does not have a key clamp, which is also very important, since self-tightening clamps are not able to hold the drill securely.These are more suitable for screwdrivers when you need to quickly change the drill or nozzle.

The 1206 series takes second place. They are not expensive, they are not equipped with a bumper mode, the electric drive power reaches 2000 watts. It will be enough at home, but when working with concrete, this function is simply necessary. The fact is that such walls contain pebbles and ASG stones, which simply cannot be drilled out. A poor-quality drill will be erased and become unusable.

The order of popularity is as follows:

1. AUM4N-14.4-2.
2. IE-1206-16/2000ER.
3. TRU-870/13ER.
4. IE-1023A-16/1300.
5. IE-1305A-16/1700R.

In terms of affordability, the order will change and will be as follows:

1. TRU-870 / 13ER - price 2395 rubles.
2. AUM5N-18-2 at a cost of 6117 rubles.
3. IE-1305A-16 / 1700R - 7907 rubles.
4. IE-1023A-16/1300 - 9950 rubles.
5. IE-1206-16 / 2000ER - 10570 rubles.

The consumer interest in products is influenced, first of all, by the price. The lower it is, the higher the demand. However, this pattern is not always observed, since product quality is important.

Conclusion

Models of drills of the Rebir brand have been on the market for more than a dozen years. Products have always been in demand due to their quality, functionality and availability. Many users note that products purchased ten years ago retain their performance. There are minor breakdowns that are easy to fix on your own. And this is an indicator of quality.