Rating of the best diagnostic autoscanners in 2022

Motorists are often faced with the fact that the vehicle does not function correctly. And often malfunctions are not displayed on the instrument panel, but at the same time, they can cause many problems. This may be a failure of speed sensors, a violation in torque, floating speed and more. It is unrealistic to identify shortcomings in an independent mode, because cars are powerfully equipped with electronics.

In such a situation, one remedy is to install a scanning or diagnostic device that helps detect the problem and sometimes fixes it on its own. But how to choose an autoscanner correctly? What parameters should be guided by - let's try to figure it out.

What are autoscanners?

A fairly large classification divides popular models into two groups:

1. standalone scanners.
2. Adapters.

The first option is made in the form of a separate functional device, which is compact in size and resembles a walkie-talkie. Here it is possible to connect to the car pads and read information from electronic systems. Many models are connected to computers. They are used in a professional environment, but the downside is that you only need to update programs in a service center.

Adapters are suitable for working with a computer, and they are popular because specialists operate under normal conditions and, if necessary, already connect additional features.

Selection criteria for autoscanners

Like most devices, autoscanners are selected according to several fundamental functions and technical characteristics, on which the popularity of models directly depends.These always include:

1. Software. This is one of the main parameters that determine the functional purpose of the adapter. It is worth noting that the more software, the more extensive the range of tasks that can be solved with this device.
2. Versatility. Autoscanners are divided into multi- and single-brand. And if the first option is universal, which is suitable for several brands of cars, then the latter is produced only for a car of a separate brand. But this diagnostic device will be more acceptable on the corresponding brand of car.
3. Interface. Few pay attention to this characteristic, but almost everyone is drawn to models that have built-in easy control. But developers often do not focus on this, which then leads to small indicators in terms of ergonomics.
4. Connecting to devices. It is this characteristic that is not the main one, because both in budget and in expensive models there is no requirement for it. But earlier models of devices can only be connected using wired devices. To date, improved options are connected using wi-fi or Bluetooth.

To date, there are quite worthy models that differ in their characteristics and cost. And that is why the rating was compiled from inexpensive autoscanners, professional devices of multi-brand and mono-brand types.

Rating of the best budget diagnostic autoscanners (up to 4000 rubles)

Rokodil ScanX

A budget diagnostic scanner that compares favorably with competitors in terms of scanning quality, the highest compatibility and functionality.It is a multi-brand device that fits seamlessly with most vehicles that have an ODB2 connector.

Connection to any device based on iOS, Android or Windows is carried out via Bluetooth version 4.2. This ensures a high reading speed of the received data.

Rokodil ScanX functionality is its main advantage. Using the device, you can receive data on all the insides of the car up to the air conditioning system. Thanks to the diagnostics carried out with Rokodil ScanX, you can get complete information from various vehicle sensors: oil pressure, coolant temperature, speed, and others. The received information is displayed on the screen. All diagnosed errors and their detailed description and interpretation are displayed in Russian.

In addition to the functionality, this scanner also attracts with its performance indicators. The device is resistant to overloads, high-quality element base provides protection for the ECU from failure. Such characteristics allow you to use Rokodil ScanX as an on-board computer and leave it on throughout the entire period of operation.

• Compatible with all car brands;
• Diagnostics is carried out quickly and efficiently;
• All diagnostic protocols are supported;
• Stable in situations of voltage drop;
• Errors identified during the diagnostic process are decoded and detailed information is displayed in Russian;
• The device is excellent in terms of cost and quality.

• Not marked by users.

Scan Tool Pro Black Edition

Scan Tool Pro Black Edition is the most preferred option in terms of price / quality ratio on the market at the moment in this price category. This multi-brand scanner is compatible with most petrol or diesel vehicles from 1993 and 1996 respectively.

The main advantages of the owners include diagnostics of all components and assemblies of the car (ABS, SRS, ESP, transmission, etc.), Russified software, stable connection via Wi-fi or Bluetooth. When using the scanner as an on-board computer in real time, you can observe all the performance characteristics of the car: speed, oil pressure, coolant temperature, readings from all sensors, Vin auto, its real mileage and much more.

Also an important factor will be a 1-year warranty (with the possibility of extending up to 4 years), a very tasty price (around 2000 rubles) and a constant update of the database of compatible cars.

• Wide compatibility;
• Diagnostic quality;
• Protection against the output of the control unit out of action;
• Warranty from 1 year;
• Low cost.

• There is no on/off button.

ORION ELM 327 WIFI MICRO

This is a fairly small, but at the same time multifunctional scanner that allows you to monitor the condition of the vehicle in real time. The software is not so advanced as to carry out a complete diagnosis, but errors can be identified and corrected in the on-board system without problems.A miniature device is very often used as a mobile option, because it fits all systems with different connectors, and can also work with phones or tablets on any known platform.

In travel mode, the scanner shows all the necessary information. Here you can find out the average speed, distance, oil and fuel consumption, as well as other movement parameters. Simply put, this is not a big and cheap autoscanner that will allow you to find and fix all problems in electronics. You can buy it on Aliexpress and find out how much it costs there.

• Best for latest car models;
• Russian language is supported;
• Small cost;
• Management is carried out through a mobile phone;
• Diagnostics takes place in real time.

• The software needs improvement;
• Autoscanner only shows visible problems.

LAUNCH CREADER V+

This version is far from perfect. But it is often purchased by motorists, due to the presence of a liquid crystal screen and the absence of the need to connect to a computer. The model is constantly updated, and new changes have already been added to the latest version, which allowed to expand the functionality. The data can be explored in the form of text and graphs, which are suitable for analyzing values.

• Price;
• The quality of diagnostics is average;
• autonomy;
• Functional;
• Representation of data in any form.

• The screen is not big enough.

Launch Creader 3001

A small device with a cable that is equipped on one side with an adapter for connecting to the car's OBDII connector (available in all cars manufactured after 2004). The case is plastic, has protection against moisture and dust. He is not afraid of dust, water, oil or dirt. The operating temperature range (-20-+70 degrees) allows you to operate the device at any time of the year. A 1.77-inch screen with a resolution of 160 x 128 dpi displays all indicators in real time.

Additional information: rated voltage 9-18 volts, net weight of the device 200 g, overall dimensions 11.8 / 6.8 / 2.23 cm.

This model is available for reading fault codes (information comes from car sensors) and oxygen sensor indicators, IML malfunction indicator, displaying real-time data on CO content and other important indicators, testing the EVAP system, there is an on-board test monitor, freeze frame.

Appearance Description: T-shaped body with ribbed sides for a secure grip. The control is 4 buttons with pictures that intuitively make it clear how to take measurements. The menu has several input languages, including Russian.

The product can be used by both professionals and ordinary motorists.

• Simple control;
• Wide operating temperature range;
• Suitable for many cars;
• Menu in Russian;
• There is access to full diagnostic data of the OBDII / EOBD standard;
• Comfortable in the hand due to the ergonomic design;
• Complies with ISO9141-2 14230-4, 15765-4, and SAEJ1850 protocols;
• Large display.

• Not identified.

OBDII ICARTOOL IC-300

This model is suitable for examining all vehicles that are equipped with an OBD II system and even those that support the CAN (Control Area Network) protocol. It can read and erase diagnostic trouble codes, generic and manufacturer-specific codes, reset service indicators, record and play Freeze frame data, display real-time sensor information in graphical and digital format, support optional extension to SAE J1979, check vehicle battery condition. In addition, the device is able to read VIN, CIN and CVN numbers of vehicles, back up ECU memory data (for analysis outside the vehicle).

• Color LCD screen;
• Support for the Russian version of the menu;
• I / M Readiness Key system (checks the operation of the exhaust system on vehicles compatible with the OBDII protocol);
• Availability of LED indication and built-in speaker for visual and sound notification of data;
• There is a built-in database with recommendations for troubleshooting;
• Free software update of the device;
• Ability to connect to a personal computer and print data through it.

• Not identified.

Ancel AD410

The compact device with the Russian menu is compatible with cars of release of 1996 and above. It erases errors from the ECU, connects quickly and supports automatic updates. Thanks to the device, you can find out the cause of the main errors in the operation of electronic components, read current and expected codes. A special button on the I / M body allows you to quickly check the main parameters of the vehicle, get a list of errors and codes and immediately print them out if necessary.

The device consists of a 2.4-inch color display, a detachable OBD II and USB cable, a plastic case and control buttons. Rated voltage - 12 volts. Net weight - 340 grams.

• Simple interface;
• Works with American, Asian, European cars;
• Self-updating when connected to a computer;
• Appearance;
• Equipment;

• Not identified.

Konnwei KW680

A simple, multifunctional scanner for monitoring, reading and deleting engine error codes with a menu in Russian, a color LCD screen and great features. It is compatible with all vehicles manufactured since 1996 that support OBD II and CAN protocols. The patented One-click I/M Readiness Key system allows for instant diagnosis. LED indication, built-in speaker serve for visual and sound notification.

The main functions include:

• Read manufacturer-specific and pending codes;
• Obtaining advanced test results for special diagnostic systems;
• Freeze;
• Reading data in real time;
• Presentation of data in the form of graphs;
• Reading, storage and playback of vehicle sensor data;
• Backup of information from the ECU memory and its analysis outside the vehicle;
• Reading VIN, CIN and CVN numbers;
• Checking the condition of the battery battery;
• Data printing via personal computer.

Additional information: operating temperature range - 0-60 degrees, storage temperature -20-+70 degrees, voltage 8-18 V, display 320 by 240 dpi. Protocol support: J1859-41.6, J1850-10.4, ISO9141, KWP2000 (ISO 14230) and CAN (ISO 11898).

• Multifunctional;
• Value for money;
• Comfortable;
• Capabilities;
• There is a storage case;
• Suitable for many cars.

• Not identified.

The best autoscanners of the middle segment (4-10 thousand rubles)

Rokodil ScanX Pro

This multi-brand device will become your indispensable assistant in monitoring, reading and deleting errors. Rokodil ScanX Pro is small in size, very easy to use and does not require cooperation with Bluetooth or Wi-Fi connected gadgets.

Car compatibility is impressive. Along with OBD2, the device supports CAN, J1850PWM, J1850VPW, ISO9141 and other protocols, which allows you to connect to almost any car.

The quality and speed of diagnostics are also at a high level. The device reads general (P0, P2, P3 and U0) and manufacturer-specific (P1, P3 and U1) fault codes at the touch of a single button. The information is displayed on the LCD screen of the device in Russian with a detailed description of the fault.

• Compatible with all car brands;
• Speed ​​and quality of diagnostics;
• The device is completely autonomous;
• Detailed decoding of all error codes in Russian;
• Ability to build graphs.

• Not detected.

DELPHI DS150E

This novelty continues the rating of high-quality models. Despite the price, which is usually not typical for premium options, this fixture has a good base of car brands. It is here that information is entered and programmed for most cars and trucks with different characteristics. The autoscanner is produced for a standard connector, which allows it to be used both at home and in salons, replacing an expensive analogue.Using this autoscanner, you can diagnose any system with very high quality and with the display of visual images. This functionality justifies the cost of the device.

• The software is completely in Russian;
• Good price;
• No need to connect to PC;
• Beautiful appearance.
• A large number of car brands have been memorized.

• Not found.

AUTOCOM CDP PRO bluetooth CARS

The autoscanner is designed to diagnose cars, trucks and commercial vehicles. It works on the basis of a stationary personal computer or laptop.

The internal structure of the product: the hardware of the device is implemented on 2 boards. The OKI M6636B microcircuit in its composition implements the diagnostic protocol for FORD cars.

The device works with Autocom CDP+ Trucks and Autocom CDP+ Cars programs, compatible with Windows 7 32 bit and XP systems.

Product features:

• Accelerated autonomous vehicle identification;
• Diagnostics of all systems and electronic control units using Intelligent System Scan technology;
• Reading, decoding, deleting fault codes;
• Reset adaptations;
• Real-time data reading;
• Work according to factory protocols;
• Ignition system;
• Climate control;
• Immobilizer;
• Dashboard diagnostics and service interval reset and more.

• One year warranty;
• Mobile;
• Long service life;
• Functional.

• Car/truck adapters sold separately.

VXDIAG VCX NANO V2014D FOR VOLVO

This model is a set of diagnostic equipment that comes with Volvo All-in-one software that allows you to test cars and SUVs at the dealer level.Vehicles from 1999-2014 are suitable for this category.

The device allows you to obtain information of a general nature, study the design of the unit under study and the features of its functioning, carry out maintenance, and organize current repairs.

What can be tested: power units, ECU, transmission, brake system, suspension, steering, body parts, interior details.

Conditions for optimal operation of the device: the presence of a personal computer or laptop with a processor with a frequency of at least 2400 MHz, at least 4 GB of RAM, at least 10 GB of free disk space, a monitor resolution for displaying graphs and indicators of at least 1024x768 pixels, and the mandatory presence DVD drive. The recommended operating system is Windows 7 (x64).

Note! Internet Explorer version 9 must be installed on the PC, on other operating systems you will need to resort to a virtual machine, which will eliminate the need to reinstall Windows.

• Comfortable;
• Multifunctional;
• Easy to operate;
• Reliable.

• Price.

ICARSOFT I901 - KIA/HUNDAI

This model is suitable for testing Kia and Hyundai vehicles. It is compatible with ISO9141, KWP2000, and J1850 protocols, equipped with 2.8 TFT LCD display, supports Russian language.

Device functionality:

• Reading / erasing errors on the engine, transmission, ABS and airbags and many other parts of the car;
• Support for OBDII/EOBD protocol;
• View data in real time;
• Checking electronic control units;
• Possibility of updating via USB port, printout of results;
• Reset service interval;
• Vehicle battery maintenance.

Product appearance description: 187/101/32mm rectangular device with 2.8" TFT LCD display, 320 * 240 pixels and operating voltage 9-18V. Power consumption - 1.8W. Temperature range for optimal operation 0-+50 degrees.

The delivery set includes a bag for carrying and storing the scanner, an instruction manual, a USB 2.0 and OBD II cable 1.8 m.

• Intuitive control;
• Big screen;
• Multifunctional;
• Value for money.

• Not identified.

Premium class models (over 10 thousand rubles)

AUTOCOM CDP

When you do not know which company is better to buy, then this option will be your salvation. This novelty came from China and is completely a copy of the Swedish counterpart. Such an autoscanner allows drivers to work with the information received on various categories of cars. But, speaking generally, such a system includes the functions of three separate autoscanners. The product is quite popular, especially among people who do business in auto repair shops. But you can't expect much from the device. The autoscanner allows you to find faults, but it is not able to prevent them.

• Good price;
• If the model is original, then the quality will be at the level;
• Good software.

• There are a large number of fakes.

SCANTRONIC R-BOX

This is a budget copy of one of the most common Lounge autoscanners. There is a lot of controversy about this device from professionals on technical issues. But the model does not cause serious complaints, because even the manufacturers themselves do not consider these devices as a full-fledged option.Among the advantages there is an extensive database of car brands. And also here is built-in free access to the vehicle database, which can be found using the menu item.

• Good interface;
• Great price;
• Continuous software updates.

• Difficult Russification of the device.

LAUNCH X-431 PAD II

This model in the form of a tablet is recognized as one of the best according to professional experts. The autoscanner was created taking into account the failures of previous models, which makes it an addition to car repair shops or where there is a constant flow of customers. The database contains a lot of information about car brands, including even UAZ.

When it comes to differences with professional models, the scanner allows you to present information in the form of drawings and graphs, as well as by tabulating data. The model is equipped with Wi-fi and Bluetooth, as well as a standard USB connector. The work is carried out on the common Android platform, which is simple and straightforward to use.

• Large database;
• Information is presented in the form of graphic images, which makes the process of perception more understandable;
• Android platform;
• Three connection types;
• Comes with old style adapters.

• Price.

HYUNDAI AND KIA GDS VCI

This model fits into this category for error handling. And the software is designed to diagnose cars of only a few brands that are made in Korea. But, due to the presence of a large number of specialists in this country, such an autoscanner is equipped with technical components. Modules are used for all automotive systems: gearboxes, electronics, engines and others.

It is now possible to tune individual systems, test functionality, and fix bugs. The acquisition will not be so expensive, given the features and additional equipment. Manufacturers also give a one-year warranty with the possibility of using car diagnostic databases.

• Guarantee;
• 6 adapters;
• The case is shock-resistant;
• A large number of possibilities.

• Insufficiently user-friendly interface.

MERCEDES SD CONNECT WI-FI

This model came from Germany and today is a fairly relevant version of the autoscanner from Mercedes. The novelty was able to combine all the best that was developed in previous versions of the system, and finalized everything to the ideal. This autoscanner can surprise even a professional driver with great experience. A good set of software is used here, which allows you to simulate the operation of many parts of the car, read information, determine the malfunction, and also configure the entire system for the driver. But the price could be lower.

• Good software;
• Possibility to connect via wi-fi network;
• Reliability;
• Better software compatibility;
• Durability;
• Good diagnostics and error correction.

• Price.

BMW ICOM A2+B+C

Another autoscanner model that came from Germany, but from BMW. It combines great functionality, as well as a small indicator of cost. This is a good combination, which is purchased by both service centers and private car owners. But in order to use this model, there are a number of significant requirements for laptops and computers.To install the program, you need a system with an Intel Core i3 processor.

• Good value;
• Required characteristics in the set;
• A large number of add-ons;
• Diagnostics at a high level;
• Support for many vehicles.

• Requires special software.

Average price per model

You can buy an autoscanner at different prices. When you choose a device from the best manufacturers, you need to know where it is profitable to buy. One of the options is AliExpress, where both budget and more elite models are collected. The cost of all the above options is indicated in the table. There is an average price for each new product.

Category	Name of product	Cost, rubles
budgetary	ORION ELM 327 WIFI MICRO	2500
	LAUNCH CREADER V+	4300
	Launch Creader 3001	2300
	OBDII ICARTOOL IC-300	4400
	Ancel AD410	3900
Medium	DELPHI DS150E	6000
	Konnwei KW680	5130
	AUTOCOM CDP PRO bluetooth CARS	6270
	VXDIAG VCX NANO V2014D FOR VOLVO	8000
	ICARSOFT I901 - KIA/HUNDAI	8900
Premium	AUTOCOM CDP	11000
	SCANTRONIC R-BOX	46000
	LAUNCH X-431 PAD II	125000
	HYUNDAI AND KIA GDS VCI	30000
	MERCEDES SD CONNECT WI-FI	45000
	BMW ICOM A2+B+C	25000