Rating of the best chisels and center punches for 2022

Chisel and punch play an important role during construction or repair work. As a rule, these tools are made of high-strength carbon steel and have an elongated shaft with a sharpened edge. To help in choosing a decent tool will help compiled a rating of the best chisels and center punches. All the details are below in the article.

Brief information

Before getting acquainted with the best manufacturers of chisels and center punches, you should pay attention to the brand that prefers a high level of quality and reliability.The first on the list are FIT and STENLEY - these are manufacturers specializing in the manufacture of durable and convenient tools. A special role in the production of chisels and cores is played by the material used during casting. These manufacturers use high-carbon steel, which undergoes special heat treatments. Ultimately, the consumer receives a reliable tool that can withstand huge loads for a long time.

It is worth noting that the leading positions in the world market for the production of the described tools are occupied by Germany, Great Britain, China and the USA. It is these countries that produce chisels and punches that have the best characteristics and demonstrate a long service life. In the event that the consumer needs a tool that is designed for home use, you should look at MATRIX and TOPEX. Chisels from these manufacturers are great for light loads and are low cost.

Having decided on the manufacturer, you need to think about the purpose of the tool, and then compare the characteristics of the selected models with possible loads. The average cost of decent chisels and center punches is 800-1500 rubles. Such a tool will certainly last a long time and bring considerable benefits.

Tool cost

Overview of the best hand chisels

The category of such chisels is considered to be cheaper and more affordable and is best suited for small workshops, as well as for home use.The principle of working with such chisels is simple - you need to hit the upper surface of the tool with a hammer so that it cuts the surface to be treated. The advantage of such equipment is that it does not need electricity and is able to function in all planes. Chisels of this group easily cope with the processing of light metal sheets, cutting blanks, cleaning welds, chasing channels, gouging bricks, stones, etc. The disadvantage is that a hand tool always takes a lot of effort, so it will not work for a long time.

Stanley FatMax 4-18-332 - metal processing

The American manufacturer FatMax has developed an excellent tool for dissecting metal materials, which ranks first in this list. Despite the fact that FatMax chisels and punches are produced in China, American equipment and all brand standards are used during the production process. This inventory has been repeatedly tested in the CIS and Europe, therefore, during the purchase in the store, the consumer has the right to familiarize himself with the relevant certificates. The distribution of goods is carried out by a dealer network, which in turn guarantees the exclusion of fakes. The main purpose of FatMax 4-18-332 is to work on industrial and construction sites, taking into account daily use. The cutting edge of the chisel has a width of 25 mm, this parameter provides convenient and easy cutting of scales, seams, and bottoms. The basis of the tool is a rigid hexagon, the length of which is 300 mm. A distinctive feature of the chisel is the ability to break through 5 mm of a metal sheet with two blows.

Expert opinion says that this chisel easily copes with cutting and processing alloyed, carbon steels, copper, aluminum, brass, cast iron, as well as welded seams. The FatMax is an indispensable tool during demolition work when bolts, nuts or rivets need to be sheared. As a protective element for the master's hand, there is a wide rubber pad located around the impact pad.

• Clean and seamless chisel processing;
• Impressive cutting edge width;
• Long chisel base;
• The presence of a protective element;
• Thick layer of base coat;
• Long service life;
• Comfortable and reliable handle;
• Possibility of punching 5 mm sheet;
• Machining most kinds of metal materials.

• Relatively fast wear of the impact pad;
• Heavy tool weight - 800 grams;
• Too high cost - 900 rubles.

FIT 46722 - concrete processing

This tool is produced by a young Canadian company that has located its production sites in China. Such a move significantly affected the cost of production, otherwise the price of the chisel would have been three times higher. The material for the hexagonal base of the chisel was tool steel, equipped with a number of increased impact-resistant characteristics. The working handle is completely covered with a thick layer of durable rubber, and a wide nickel with a flat surface acts as a protective element in the tool. The thickness of the cutting edge is 22 mm, which is ideal for chasing channels for electrical networks. The main part of the chisel has a length of 250 mm.

Craftsmen emphasize FIT 46722 as a tool that can easily deal with dismantling brick structures or chasing small channels in concrete surfaces. Definitely the most affordable option among hand chisels, which is suitable for both industrial and home use. Such inventory easily knocks down old bolts and nuts, which only emphasizes the need for a chisel in any home.

• Comfortable and reliable rubberized handle;
• The best price indicator among all rating chisels is 250 rubles;
• Penetration of concrete of any density;
• Sufficiently light weight (450 grams), contributing to convenient use on walls and ceilings;
• Increased impact resistance of the penny;
• The presence of a protective element.

• The softness of the protective lining, blows easily break through the protection;
• Designed exclusively for concrete structures, while working with metal, the edge is instantly dulled.

TOPEX 03A149 - stone processing

The next tool in this rating is the Polish chisel TOPEX, which is produced in the country of origin. The material for the base of the chisel was high-carbon steel, thanks to which the tool easily copes with the crushing of concrete, stone, brick and plaster. The cutting edge of the chisel has a thickness of 19 mm, and the narrow surface of the element improves the immersion of the inventory into the surface of the material being processed. Also, the tool is great for dismantling work. TOPEX is in high demand because the working handle is equipped with a thick rubber layer and has special protrusions for the finger, making the production process much easier. Protection for the master is provided by a rubber pad, which is conveniently placed around the impact pad.The appearance of the chisel causes only delight, and the brand name on each model guarantees the avoidance of fakes.

The TOPEX chisel is a vivid example of an ideal ratio of quality and price. The tool is durable, reliable, convenient and relatively cheap. It copes with the dismantling of old skirting boards, door and window openings thanks to a long rod of 400 mm. The element has a significant impact on the thick layer of walls, while not injuring the hands of the master

• The impressive length of the rod is 400 mm;
• Ergonomic and comfortable handle;
• Very light weight - 350 grams;
• Low cost - 300 rubles.
• Durable chisel alloy;
• The presence of a protective lining.

• Small width of the cutting tool;
• Long-term installation in doorways due to the significant length of the rod.

Overview of the best chisels for rotary hammers

Such a tool, as a rule, is used together with drilling and percussion installations. The essence of the work is simple, the chisel is installed in the punch chuck, after which the gearbox, using the bearing, begins to spin the tool. Using such a system, the master will be able to quickly dismantle the masonry, drill large holes, ditch small channels and remove the outer layer of the finish. The choice of the length of the chisel is carried out depending on the thickness of the walls. However, it is worth remembering that you can use such a tool only in conjunction with a puncher. Metal surface treatment is not carried out.

SDS MAX MATRIX 70343

This chisel is manufactured by a German company that has located its production facilities in China. The 18mm hex base has a spatula shape with a splashed end.

The cutting edge of the tool is ideal for removing the outer layer, as well as for deep immersion in the surface to be treated. The width of the element is 25 mm. SDS MAX MATRIX 70343 is considered the longest chisel in the ranking, as its figure is equal to 600 mm. The main calculation goes to the impact mode without rotation. The tool has a specially designed shank, which is compatible only with construction hammers.

As one would expect, the distinguishing and strongest aspect of the chisel is its length. This is one of the largest chisels, which is perfect for punching walls with a width of 500 mm, laying pipes, strobe ventilation channels, etc. The tool is quite durable and does not need regular sharpening.

• The largest length of all chisels is 600 mm;
• Decent cutting edge width - 25 mm;
• Easy and quick installation of the chisel in the chuck;
• A protective element is installed to prevent spontaneous slippage of the tool;
• Does not require constant regrinding.
• The low cost of inventory - 300 rubles.

• Huge chisel weight - 1.2 kg;
• The tool produces only percussion actions, rotational actions are not supported;
• It is installed only in large rotary hammers.

MATRIX 70311

Another German tool that is made in Europe. The inventory has remarkable parameters: the cross section of the rod is 14 mm, the width of the cutting edge is 40 mm, and the length of the base is 400 mm. Thanks to these characteristics, the chisel is considered an excellent option for working at low heights, without the use of ladders and stepladders. Mostly users praise the tool for its sharp and efficient edge.This result was achieved thanks to the material of the chisel, which was alloy steel, which was hardened. It is worth paying attention to the angle of the sharpened edge. The fact is that the developers worked on it for a long time and selected it through regular experiments. The locking groove of the shank has a special recess, which prevents the tool from accidentally slipping out of the chuck.

This chisel is distinguished by a high speed of removing the outer finish due to the wide cutting edge. The flat element of the tool instantly clings to the top layer of the finish and removes it from the surface to be treated. Also, the inventory is convenient due to its light weight and compatibility with small rotary hammers that work with the SDS-plus chuck.

• Pretty low weight - 450 grams;
• Perfectly sharpened edge;
• Support for small and medium rotary hammers with SDS-plus chuck;
• Durable and wear-resistant chisel material that has undergone special heat treatment;
• Production takes place in Germany;
• Large edge width - 40 mm.

• A niche in the masonry is heavily hollowed out;
• Often amenable to mechanical deformation under long-term loads.

Review of the best punches

This tool is widely used in the field of measuring and marking work necessary to correct the installation of the drill. The punch is a cylindrical rod, one end of which is sharpened at an angle of 100 degrees. On the other side there is a striker, which will be hit with a hammer. The material used is mainly high-strength steel that has undergone heat treatment.

KWB 9209-90

German-made punch, which is manufactured in China.It is a compact cylindrical rod, specialized in marking the surface of metal structures. This tool is made of alloy steel, which has undergone special hardening and has a carbide tip. The master is protected by the corrugated surface of the rod, thanks to which the rod does not slip out of the hands. The length of the rod is 130mm and the width is 70mm.

• Durable impact element;
• The presence of a corrugated surface;
• Strength of the working part;
• Light weight - 120 grams.

• High cost - 500 rubles.

STANLEY 0-58-120

The American center punch STANLEY 0-58-120 is made in France and is widely used in the field of drawing recesses and markings for subsequent drilling. The tool core is milled, and the material is hardened and lowered steel, which has been hardened. A distinctive feature of the punch is increased resistance to impact work. The striker of the rod has a square shape, which is easier to strike. The entire surface of the inventory is covered with a layer of varnish, thanks to which corrosion protection is made. The rod has a length of 150 mm, a width of 72 mm.

• Milled tool body;
• Lacquer coating of the center punch;
• Convenient form of the tool;
• Relatively low cost - 260 rubles;
• Increased wear resistance.

• Large weight - 400 grams.

It is worth remembering that this rating is strictly subjective and is not considered a buying guide or advertising. You should always consult with the seller before purchasing such goods.