Rating of the best liquid nails for 2022

Liquid nails are an analogue of building glue. The main purpose is to speed up the process of gluing various surfaces and make it simpler and more reliable. The best manufacturers fill the market with quality products, both inexpensive and at a significant price. Currently, the products enjoy well-deserved popularity all over the world.

History of occurrence

There is an opinion that for the first time liquid nails appeared in the 60s in the USA. The famous American company Masso decided to simplify the process of using ordinary glue by packaging it in ordinary cartridges. After a short time, a modern development was born - Liquid nails, which became widespread in America. The goods entered the Russian market only in the 90s of the 20th century.

The new adhesive was made from synthetic rubber and polymer additives. The filler was a special high-density clay, which was mined in the state of Texas. Today, clay has been almost universally replaced by chalk, which has made the product white, but the quality has suffered a little.

At one time, the composition was added:

• acetone (promotes accelerated drying);
• toluene (improves adhesion).

However, the presence of a high content of toxic elements in them made us reconsider the issue of their further use. It should be borne in mind that budget options may contain additives that distinguish them from an unpleasant odor. These products are not recommended for indoor use.

What are

The products differ in the type of solvent. This depends on the scope of its application. There are several varieties of liquid nails, the distinctive features of which are given in the comparative table:

Kinds	Description
Neoprene	Rubber-based (synthetic). Used for gluing heavy structures, including metal ones. They are not afraid of high humidity, temperature changes, too much frost. They grip quickly and firmly. The disadvantages include slight toxicity and an unpleasant "aroma". You can work with them only with gloves and a mask, with open windows in the room. Expert advice - do not use with synthetic materials.
Water-based acrylic	Water based. The advantages include the absence of odor and toxicity. Even with popular models, the strength is a little “lame”, so they are used to fasten lighter products, including porous surfaces. The negative characteristics include significant sensitivity to temperature changes, slight moisture and frost resistance. The recommendations of professionals are as follows: refuse to use in the kitchen, in the bathroom and in open spaces.

Compositions are qualified for their intended purpose, and therefore they are divided into:

• special;
• universal

Moreover, the latter option is widely used in various conditions for gluing any surfaces. There are options when a special mounting adhesive with specific parameters is more suitable for the designated tasks. The compositions can be special and used exclusively for their intended purpose. On the shelves of specialized stores you can find liquid nails for:

1. outdoor works.
2. Internal works.
3. Wet and dry rooms.
4. Mirrors, ceramics and glass.
5. Expanded polystyrene and MDF panels.
6. Fastening structures with significant weight.
7. With the function of fast curing and increased strength.

Which product is better to buy depends on the conditions and volume of manipulations performed. Full information regarding the scope of use is indicated by the manufacturer on the packaging.

Areas of use

For the most part, this product belongs to the category of universal (with rare exceptions), therefore it is suitable for manipulating the following materials:

• fiberboard;
• MDF;
• Chipboard;
• ceramics;
• mirrors;
• glass;
• plastic;
• polystyrene;
• drywall;
• brick;
• metal;
• cork panels;
• aluminum;
• sinks, showers and bathtubs;
• siding;
• window covers;
• door frames.

Often, the composition is used to seal cracks in walls, joints of corners, ventilation holes, countertops. The recommendations of experts boil down to the fact that even the most popular models that top the rating of quality products should not be used for gluing aquariums and when working with wet wood.

Positive and negative qualities

The advantages of the product are much greater than the disadvantages. The benefits include:

• Use not only for flat, but also for curved surfaces;
• Elementary in use;
• High strength;
• Convenient packaging;
• Adhesion with all kinds of materials;
• Not afraid of corrosion;
• Maintain surface integrity
• Mounted without noise, dirt and dust;
• High speed of manipulation;
• No toxicity;
• Excellent fire resistance, frost resistance;
• Not afraid of moisture;
• The presence of a neutral odor;
• Consumption is minimal;
• Environmental Safety;
• Intended for outdoor and indoor use;
• Even a beginner will cope;
• There is no need to use expensive tools.

There are practically no disadvantages, with the exception of certain restrictions on operation, as well as a significant cost.

Principle of operation

There is nothing difficult in working with this product. You just need to purchase the appropriate composition and a special gun into which the glue cartridge is inserted. In appearance, the gun resembles a syringe, but with large parameters. The tube is inserted into a special niche so that it touches the tip on one side and the pressure surface on the other. Installing the cartridge and the operation of the gun does not cause any difficulties.

Pistols are produced in two types:

• leafy;
• frame.

The latter are distinguished by reliability and quality of fixation. Pistols also come with and without reverse action. For the home, it is best to use a design with a reverse stroke; for professional activities, in the presence of a large volume, it is better to use a device without a reverse stroke.

The gluing process is as follows:

1. Surfaces are pre-cleaned and degreased.
2. The application of glue is carried out with a serpentine gun or pointwise.
3. The materials are folded and firmly pressed, held for an average of two minutes. After the hand can be removed. Mandatory control of horizontal and vertical level.
4. Final drying occurs after 12-24 hours, depending on many factors, such as composition, ambient temperature, humidity index, room ventilation, and so on.

The presence of an organic solvent in the composition of the product involves working with gloves and a mask to protect the respiratory tract.

Removing liquid nails

During the repair process, drops of glue can get not only on the designated material, but also on the face, hands, clothes, and so on. The composition must be removed immediately. This will require a sponge or rag, soap, warm water, petroleum jelly, a scraper, vegetable oil and a solvent.Let's consider this issue in more detail.

• From clothes

The best option is to resort to the help of anti-glue "Second". You can heat the fabric with an iron or hair dryer, and then cool it in the refrigerator. The glue loses its properties and detaches from the object. If the material is not afraid of acetone, then you can resort to its help. If it doesn't work the first time, you can try again. To avoid sticking the flap to the table, a clean sheet of paper is placed under it. The composition is removed with a toothbrush (unnecessary).

• From materials

If the composition gets on a third-party surface, it is removed with a sponge dipped in water, white spirit or a soft spatula. When the glue dries completely, only a hard spatula or blade, as well as fine sandpaper, will help. If necessary, divide the glass structures, they are heated to a temperature of 60 degrees.

• From the skin

Acrylic nails are easily removed from the skin with laundry or liquid soap. When using neoprene compounds, it is better to seek help from vegetable oil or petroleum jelly.

How to choose the right product

Selection criteria are individual and depend on the preferences of the master, experience and the amount of work performed. It is difficult to say which company has the best products. According to buyers, there are plenty of high-quality goods on store shelves, differing in functionality, average price, and place in the rating. The best ones are the most expensive. What to pay special attention to avoid mistakes when choosing:

1. Full set period. This indicator varies. When repairing walls and ceilings, it is better to choose a representative from the quick-setting and heavy-duty series.
2. The quality of the composition. Pay attention to the presence of chalk, which significantly degrades the quality of the product.If you have to deal with heavy objects, then the presence of chalk is best avoided.
3. Try not to purchase glue with acetone.
4. For laying ceramic tiles in the kitchen or bathroom, opt for a moisture-resistant composition.

Where to buy, each is determined independently. You can visit specialized markets and review the products offered, chat with a sales manager, learn about new products, and see how much it costs. There is an option to order liquid glue online in the online store, after reading the reviews of specialists.

Rating of the best liquid nails for 2022

Universal

Krass, 300 ml

Beige composition. Ideal for gluing:

• bricks;
• metal;
• plywood;
• wood;
• concrete;
• stone;
• gypsum;
• PVC;
• plasters;
• ceramics.

Does not destroy the butadiene-styrene structure, it is convenient for mounting polystyrene materials. Provides the ability to adjust the position of glued parts. It is used exclusively on a clean, degreased and dry surface. Shelf life - one year at temperatures from +5 to +25 degrees. Transportation is possible at sub-zero temperatures of -15 degrees.

The average cost is 172 rubles.

• vibration resistance;
• drying speed;
• moisture resistance;
• not afraid of chemical exposure;
• resistant to weather conditions.

• not identified.

Alfa Flex 91, 280 ml

Products can be used at temperatures from +10 to +30 degrees. Drying time - up to 15 minutes, color - beige. Universal plan: glues wood, glass, plasterboard, metal, concrete and other products. It is widely used for finishing and assembly seams, forming an elastic durable layer.

The goods are sold at a price of 172 rubles per unit.

• elasticity of the seam;
• noteworthy adhesion;
• suitable for almost all materials;
• super strong;
• convenient packing;
• moisture resistance;
• affordable cost;
• sold at any specialized outlet;
• operational grasp.

• missing.

Zubr Expert KM - 100

Russian brand, but produced in Poland. It has excellent adhesive properties. Effectively fills voids and firmly holds the material together. Resistant to moisture, low temperatures, ultraviolet radiation, mechanical damage. Suitable for all materials, including metal. Included in the TOP of high-quality products. It is popular for professional installation.

The average price is 209 rubles per tube.

• anti-corrosion properties;
• fast drying speed;
• withstands significant loads;
• a budget option;
• ease of application.

• you need to purchase a special gun;
• fakes with chalk come across, which negatively affects strength.

Titebond Multi Purpose

A quality product is made by an American company. The main feature is a lot of positive characteristics. Designed for universal use both indoors and outdoors. Quickly and efficiently glues metal, chipboard, concrete, MDF, tiles and other products. Half an hour is enough for a positive result. It has a light beige tint, optimal consistency.

The average cost is 240 rubles.

• frost resistance;
• safety;
• excellent adhesion;
• drying speed;
• moisture resistance;
• anti-corrosion;
• reliability;
• good combination of price and quality;
• durability;
• Ease of use.

• not installed.

"Moment" universal mounting

Russian-made products are especially popular among both professional builders and beginners. Quickly and efficiently glues polystyrene panels, concrete, fiberglass, brick, wood and so on. Half an hour is enough for complete drying. Differs in the high durability and resistance to temperature differences.

Sellers offer glue at a price of 227 rubles.

• optimal consumption;
• elasticity;
• strength;
• a wide range of applications;
• water resistance;
• convenient capacity;
• used for uneven surfaces.

• toxicity;
• acrid smell.

For plastic

Henkel Makroflex MF 995

The Finnish manufacturer produces high quality products and is completely safe. With a professional composition, you can work at a temperature of -10 degrees. In the manufacture, modern technologies were used, allowing the use of glue for any known building materials. Even if irregularities are detected, minimal mechanical fixation will be required.

The average cost is 361 rubles.

• not afraid of moisture and sub-zero temperatures;
• strength;
• durability;
• heat resistance;
• universality;
• value for money.

• not identified.

Point 98

The products of the Lithuanian company made of synthetic rubber are used for any repair and installation work. Differs in instant grasping, despite quality of the environment. The composition makes it possible to make a seam of special strength, while maintaining elasticity at the proper level.It does not spread, which allows you to quickly and efficiently lay out walls with ceramic tiles, fix glass, PVC panels, and so on.

The average cost is 326 rubles per unit.

• frost and moisture resistance;
• used at temperatures up to -20 degrees;
• excellent strength;
• significant separation resistance (4 MPa);
• universality;
• durability;
• safety.

• missing.

Kraftool KN-915

Product of a German manufacturer of appropriate quality and reliability. It is mainly used for working with PVC products, although it belongs to the universal type. Great for kitchen and bathroom renovations. Bonds plastic, metal, wood and more. The main advantage is the instant setting.

Products are pleased with the price - only 220 rubles per unit.

• safety;
• convenience during operation;
• the presence of an antiseptic;
• frost resistance and moisture resistance;
• better adhesion;
• produced using unique technologies;
• good combination of price and quality.

• not installed.

for tiles

Quelyd Mastfix

It is mainly used for interior decoration and landscaping. The French company pays great attention to product quality. An indispensable assistant for gluing tiles. Copes also with plastic window slopes and ceiling cornices. The main condition is that at least one of the materials to be glued must ideally absorb moisture.

The average price is 272 rubles.

• instant grip;
• reliable fixation;
• ideal strength;
• neutral smell;
• economical consumption.

• missing.

Tytan Ceramic and Stone

Polish-made products are distinguished by safety and speed of fixation. There is practically no smell, there are no solvents in the composition. The setting period is 5 seconds. Due to the optimal consistency and convenient packaging, the adhesive is quickly and efficiently applied to any surface, both vertical and horizontal. In addition to tiles, it does an excellent job with skirting boards, stone, plaster, ceramics and wood.

Sellers offer goods at a price of 250 rubles.

• perfect white shade;
• to be painted after drying;
• does not crack;
• high adhesion;
• Excellent value for money and quality;
• lack of smell;

• not identified.

Ceresit CB 100

High-quality German-made products are very popular among professional builders. Widely used for both indoor and outdoor work. The main requirement is the complete absence of interaction with moisture. It is used for gluing materials with large surfaces, including artificial stone, wood, PVC.

The average price is 275 rubles.

• fast and reliable fixation;
• does not require additional physical effort;
• it fills the voids;
• effective;
• long service life;
• easy to use.

• missing.

For wood

Krass Mirror

The Polish product is produced using modern technologies. Great attention in its manufacture is paid to safety and efficiency. It is used both when working inside and outside the premises. Does not destroy the amalgam, resistant to temperature fluctuations, guarantees reliable coupling.

In specialized stores they offer a composition for 199 rubles per unit.

• not afraid of moisture;
• durability;
  adhesive layer strength;
• resistance to deformation;
• it fills in irregularities;
• fixes decorative elements;
• high breaking resistance.

• not installed.

Vermeister Quick Stop

The product is made in Italy. Mainly used for vertical surfaces. Differs in fast grasping. The presence of a water base makes it completely safe for indoor use. A good option for working with wooden skirting boards, profiles, accessories, platbands, extensions and so on. Significant adhesion allows you to make a strong seam in a minimum time. The maximum time for complete drying is two days.

The average price is 475 rubles.

• the absence of solvents, amine and epoxy compounds in the composition;
• safety;
• does not require ventilation of the premises;
• fast installation;
• instant grip;
• high adhesion;
• efficiency;
• long operational period.

• use exclusively for internal work.
• significant cost.

Kudo KBK 301

Economical yet high quality cleaner for wood surfaces, drywall, chipboard and fiberboard. Excellent adhesion performance. The water base does not contain toxic solvents, making the product odorless. After complete drying, it is possible to carry out staining.

The average cost is 170 rubles.

• low price;
• convenient in operation;
• reliable;
• safe;
• wide temperature range - from 60 to 80 degrees.

• not used in rooms with high humidity.

For concrete and brick

Stayer Blackpro Extra FIX

The product is made in Taiwan. It is distinguished by powerful fixation, which makes it possible to glue various elements, both wooden and plastic, as well as from decorative stone, to the concrete wall. Installation of panels is carried out in any position and does not cause any particular difficulties. It can be used to install parts in a car interior or work with a body kit.

The average cost is 205 rubles.

• a variety of colors;
• use in interior decoration with any interior;
• excellent contact with the surface;
• hardens quickly;
• not afraid of significant temperature changes;
• moisture resistant;
• the possibility of spot work due to excellent adhesion;
• combination of price and quality;
• durability;
• reliability;
• safety.

• missing.

Ultima 309

The Malaysian company produces high-quality goods for fastening heavy structures. It has an enhanced effect, it is used in repairs both indoors and outdoors. Seizes instantly, without additional support. Installation of concrete and stone slabs is not particularly difficult. After complete drying, the seam is able to withstand any mechanical stress. Final hardening - in a day.

In retail outlets, you can purchase products at a price of 204 rubles per tube.

• moisture resistance;
• resistance to detergents;
• efficiency;
• durability;
• comfort in use.

• the presence of solvents in the composition requires careful ventilation of the room.

Masterteks

The Russian product is made in the territory of the Celestial Empire. The seam is as strong as possible, not inferior in strength to nails or screws. Withstands a weight of 110 kg per 1 sq.m. They are in great demand during the installation of large and heavy elements.

The average cost is 259 rubles.

• does not spread;
• convenient to apply;
• powerful grip;
• high-quality adhesion;
• increased resistance to moisture and severe frosts;
• suitable for working both inside and outside objects.

• not identified.

For stone

ProfiMaster, 0.528 g

Mounting adhesive acrylic. Suitable for stone, plaster, ceramics. White. Differs in fast grasping. It is very popular among professionals whose work is related to decorative and finishing materials.

You can buy at a price of 207 rubles.

• improved formula;
• excellent adhesion;
• fast grasp;
• excellent fixation;
• adhesive strength;
• does not allow elements to slide;
• used for external and internal work;
• environmental Safety;
• efficiency;
• long warranty period;
• long service life;
• resistance to temperature extremes and high humidity.

• not installed.

Homakoll

The Russian product is used for external and internal work during construction. Suitable for bonding stone, PVC tiles - panels, glass, cork, parquet, polystyrene foam, wooden structures, MDF and so on. Can only be used on absorbent substrates:

• Chipboard;
• tree;
• gypsum plaster;
• concrete;
• moisture resistant plywood;
• bricks;
• DSP.

It is not recommended to keep the seam in water for a long time. The production is based on an aqueous dispersion of acrylic copolymers. Available only in white. It is applied to the surface with a special construction trowel with rectangular teeth 6 x 6 mm or 4 x 4 mm. Average consumption - from 300 to 1000 g/sq.m., depending on the working surface and the application tool used.

Seizes in 20 min. It will take 72 hours to dry completely. If the original factory packaging is not damaged, it can be stored for up to one and a half years at temperatures from +5 to +30 degrees. Available in two different weights.

The goods are sold at a price: for 1.5 kg - 399 rubles, for 4.5 kg - 1199 rubles.

• no hazardous substances are used in the production;
• can be transported at temperatures up to -20 degrees;
• high strength;
• significant adhesion;
• used when working on vertical and inclined surfaces;
• bonding can be corrected within a few minutes;
• environmental Safety;
• does not contain organic solvents;
• lack of smell;
• frost resistance;
• long service life;
• reliability;
• convenience in operation.

• not recommended for use with Teflon, polypropylene, polyethylene and other similar materials.

heavy duty

A distinctive feature of the product is high strength and super strength. It is very popular when gluing metal surfaces, frozen wood, concrete, brick, hardboard, plywood, stone, chipboard, plaster, fiberglass, ceramics, slate and so on. The glue is applied to the surface in small dots, evenly, at a distance of about 5 - 10 cm.

The average cost is 215 rubles per pack.

• used for work both inside and outside buildings;
• used for sealing centimetric seams and cracks;
• bonding quality;
• anti-corrosion properties;
• after complete drying, you can give the seam any shade using water-based dyes;
• long service life;
• ecological cleanliness;
• safety;
• efficiency;
• reliability.

• not installed.

Conclusion

Any professional builder will tell you that it is impossible to build a new building or make repairs to a house in the absence of high-quality, reliable and durable fasteners. There are many different options: nails, screws, and so on. But the process with such "helpers" is too laborious and takes a lot of time. Moreover, their use leads to additional loads on the surface and loss of attractiveness. Currently, liquid nails are widely used - a unique way to quickly and efficiently connect all kinds of materials.