Rating of the best protective coatings for car body for 2022

In summer, most car owners increase the number of trips. For some, these are weekly visits to summer cottages, for others, long-distance vacation trips. And in one, and in another case, it is often necessary to drive on roads, the cleanliness of which could be better.

From under the tires traveling towards the vehicle, a lot of grains of sand and even stones fly, leaving marks on the car. Each of these traces seems to be insignificant, but after some time they all make the car look dull, and the owner has a desire to repaint the car from scratch. The scorching bright sun also “knows how to inherit” - the paint burns out.

To protect the machine from the negative influence of the external environment, a number of proven methods are used - from inexpensive and short-lived to expensive and wear-resistant. In this article, we will consider the best protective coatings for a car body for 2022.

Types of protective coatings

Protective coatings are divided into:

• polishes;
• waxes;
• "liquid glass" or "liquid case";
• special protective films;
• polymer coatings;
• modern two-component compositions.

The best polishes and waxes

Polishing with a protective effect consists in the fact that a microlayer of polymeric materials is applied to the paintwork of an automobile body, giving the surface a shine and guaranteeing protection of the paintwork from negative environmental factors and microdamages.

Protective type polishes differ in different levels of application difficulty, as well as service life. This also determines the cost, ranging from two hundred rubles for a bottle for do-it-yourself application to several thousand for processing by craftsmen using professional tools.

Professional type polishes are made on the basis of Teflon, nanoparticles and epoxy resin. Teflon-type polish lasts about three months, and the components contained in its composition protect the car from the influence of active chemical components and have water and dirt-repellent effects.

Treatment with an epoxy resin composition lasts about a year. After treatment, the coating begins to interact with the paintwork at the molecular level, thus forming a thin “glass shell” that protects against sand and road dust, and also protects against organic stains.

Nano polishing of the car body is characterized by a maximum service life (about 36 months) and resistance to chemical and mechanical environmental influences. Ultimately, due to this treatment, the body is made smooth to such an extent that a significant part of the dirt literally flies off the car.

Coating a car with professional compounds is more durable. This process can be carried out independently, you only need a special tool.

1 place. CARALL 2048

This is a liquid type polish that forms a glossy layer on the car's paintwork and repels water. After processing creates a reliable paraffin layer. Suitable for processing:

• body;
• windshields;
• mirrors;
• rims;
• headlights

How to use:

Apply to a clean wet or dry coating and wipe with a towel. Work is best done in the shade at a temperature with a “+” sign, but the machine should not be hot. The color of the car doesn't matter.

The average price is 800 rubles.

• it is quickly applied and gives the car paintwork a steady diamond shine;
• the composition contains a set of silicone-type polymer components, as well as natural wax;
• in a couple of minutes it forms a protective layer on the coating that prevents the influence of negative environmental factors;
• repels water from the surface of the car.

• not detected.

2nd place. Adolf Bucher Quickwax

Wax of high concentration, which is designed for efficient and quick drying, as well as protecting the body of any vehicle. It is used in combination with both soft and hard water.

It is used during the work with AVD and on the automated sinks.

The best result can be achieved if you use the wax in combination with a branded shampoo from the same brand.

The average price is 800 rubles.

• high concentration;
• dries quickly and effectively
• suitable for all types of vehicles;
• Suitable for use with both soft and hard water
• It is used in automated car washes, and in establishments with AED.

• not detected.

The best coatings such as "liquid glass" or "liquid case"

Such funds differ in a completely different mechanism of action, however, they are grouped into one category due to the method of processing. "Liquid glass" will be an excellent choice for drivers who care about the appearance of the car, because this composition, in addition to the protective effect (the active coating is several times thicker when compared with the polish considered above), gives the impression that the car was properly varnished.

This innovative development is distinguished by an exclusive composition based on alkaline solutions of sodium silicates, which interact chemically with the paintwork surface of the car, forming a glass film on the body that protects the car for about 3 years.

A tool is applied to the prepared car body in an even layer (as a rule, the procedure is performed with a sponge), after which the body is manually polished with a soft cloth.

If you cover the car with "liquid glass" in the maintenance service, then the procedure will cost the car owner about 6 thousand rubles.

"Liquid cover" will be an excellent option for applying for a while. As a rule, this is a tool that dries quickly and has some similarities with the film of a balloon. The composition is quite simply applied to a clean car body with an ordinary brush.

Experts recommend repeating the procedure a number of times in order to obtain the most durable coating that is durable and easy to remove.

1 place. Silane Guard

The product of the manufacturer from Japan, which occupies a leading position in the market. It has excellent performance characteristics. One package of this composition is enough to treat the car 2-4 times.

In the process of applying this composition, the car owner does not need to mix anything. Everything you need is already provided by the manufacturer.

Of the obvious advantages, buyers note the ease of use of this 1-component tool. Processing is carried out as follows:

1. The car is washed.
2. The sponge is wetted with the product.
3. The car is covered with "liquid glass".
4. Drying time - 10 min.
5. The machine is wiped with a special cloth.

In general, this is an excellent composition, which is used by many car owners at home. It gives the body an intense color and protects the car from small scratches.

The average price is 850 rubles.

• repels water;
• excellent result;
• complex type protection;
• inexpensive;
• everything you need for processing is included in the kit.

• not detected.

2nd place. Smooth Egg Liquid Soft

The composition is made on the basis of silicon dioxide, which is used to increase the strength and update the protective properties of the car body in combination with "liquid glass".

The product improves the water-repellent effect of the protective layer and increases the service life. Can also be used as an independent protection layer. In the package, in addition to the product itself, there is a cloth for processing.

How to use:

1. Before applying "liquid glass" you need to wash the car.
2. The composition is applied to the body and wiped with a cloth.

The average price is 1,300 rubles.

• renews the water-repellent effect;
• applied as an independent layer of protection;
• protects and increases the durability of the layer based on "liquid glass";
• suitable for application to unpainted plastic elements.

• not detected.

The best screen protectors

Today, a protective film is one of the most expensive, but also the most effective methods for protecting a car's paintwork from chemical and mechanical damage, as well as from the effects of UV rays.

There are 2 key types of film:

1. Vinyl.
2. Anti-gravel, the use of which is also called lamination.

A vinyl-type film does not differ in increased resistance to damage and serves more as a decor, and therefore costs less when compared with anti-gravel.

Anti-gravel film is able to withstand such a powerful impact that it protects the paintwork of the car even from the effects of minor accidents. Distinguishing films from each other is real. To do this, you need to try to tear off a piece of film or make a hole - with vinyl this can be done without much difficulty, but with anti-gravel it is almost impossible.

Processing is carried out on individual parts of the body, so that it is possible to apply the film exclusively on the parts most prone to mechanical influence - front lights, bumper, pillars, hood, fenders and exterior mirror cover. The film is applied to the part, which was pre-treated with a special agent, after which it is closely adjusted to the coating under a stream of hot air.

If the procedure is carried out correctly, then the film will last a couple of years, and then it will be easily cleaned.

In addition to the protective effect, the film makes the car look better (there are brands with a matte, glossy and mirror effect, as well as with a personal pattern, which will be cheaper than airbrushing).

In view of the technological conditions and the need to have specific experience, experts advise covering the car with such films in technical service salons.

The cost of the procedure is determined by the level of the film, the dimensions of the machine and the number of surfaces to be treated. The most budgetary price tag for pasting only the front of the car starts at 5 thousand rubles.

If you want to cover the car with a similar film with your own hands, then experts recommend buying the so-called. "Avtoskol". It differs from professional-type films by increased elasticity properties, which makes it possible to bypass the appearance of wrinkles, as well as ease of application and ease of removal from the vehicle.

A roll of such a film will cost an average of 1000 rubles.

1 place. Oraguard 270

Colorless anti-gravel self-adhesive vinyl film is made for full wrapping of cars and protection of paintwork from scratches and chips. The tool stands out from the competition with excellent resistance to mechanical stress and protects the car body from UV rays.

The German quality of products of this brand and the positive comments of customers only confirm the excellent result of use.

The average price is 950 rubles.

• colorlessness;
• protects the car body from powerful mechanical influences, as well as from possible damage to the car's paintwork when hit by stones;
• protects the surface from UV rays;
• durability - 5 years.

• not detected.

2nd place. Solarnex Magnum Hybrid

This is a premium mixed type anti-gravel film that has come to replace PVC protective films and surpasses them in all respects.

The developers of Solarnex managed to achieve excellent quality indicators and product stability, so this film is very similar in appearance to polyurethane-type films, but it comes out much cheaper at a cost.

Anti-gravel film differs from its competitors by the presence of a self-healing water-repellent layer that is resistant to damage. However, if the car owner still managed to scratch it, then this can be easily eliminated using hot air or water.

Under the influence of hot air / water, a self-healing procedure begins, as a result of which scratches disappear.

The average price is 1,950 rubles.

• elastic;
• water-repellent effect;
• self-healing effect;
• topcoat;
• gives shine.

• not detected.

The best protective coatings based on polymers

Products based on polymers are in fact good protection against significant aggressive environmental influences and mechanical damage.It guarantees waterproofing, copes with grains of sand and gravel flying from under oncoming cars, and also protects the car from reagents and salt in the winter season.

Polymer protective coatings are simply adored by pickup truck owners. They apply the composition to the bodies of their cars and do not worry about the appearance of chips and scratches.

1 place. Willson WS-01261

With the advent of this tool, drivers can quickly add not only shine to their car, but also secure it thanks to a layer of polymers.

The product does not need to be buffed as the One TIME technology and fiber cloth make it easy to coat the car with the compound to form a high quality body protection.

Due to the presence of light-sensitive substances in the composition, the polymerization process is carried out both under artificial and under sunlight. The package includes a fiber cloth, which is washed after each use.

How to use:

1. Wash the car: wash off dirt and dust from the surface.
2. Dry the car using synthetic suede.
3. Fold the napkin that comes with the kit to the size of the palm of your hand.
4. Apply a little product (a couple of strips of 4 cm) on a napkin and rub in a circular motion over the car body until a shine is formed.

Experts do not recommend applying a lot of funds at a time!

5. If the product on the napkin is dry, use the other side of the napkin.
6. At the end of the procedure, wash the napkin with soapy water.

The average price is 1,300 rubles.

• does not need polishing;
• ease of application;
• provides high quality protection;
• rapidly polymerizes.

• lasts approximately 1-1.5 months.

2nd place. SONAX Polymer Netshield

Mixed technology polymer-based product suitable for all types of paintwork. Protects the paintwork of an automobile body due to a resistant grid of elements of organic and inorganic origin, which provides hermetic protection of the surface for a period of about six months.

The composition is quick to apply and is easy to use, richly renews the color and guarantees an improved water-repellent effect. Reduces the adherence of dirt, dust and insects, and makes it easier to clean the coating within the specified period of validity.

The average price is 1,200 rubles.

• protects the body for six months;
• richly renews color;
• improves the hydrophobic effect;
• reduces the impact of sticking dirt, insects and dust;
• simplifies the cleaning of the coating within the specified period of validity.

• not detected.

The best two-component protective compounds

So we have come to the most reliable method of protecting the car body not only from chips, but from anything. The two-component polyurethane compound was originally used to treat trucks in order to protect them from damage.

After some time, pickup truck owners began to use it in order to protect cargo compartments from chips, as well as jeep owners who need high-quality protection for off-road driving.

The tool guarantees reliable protection, since it differs from competitors in resistance to mechanical stress.

How to use:

The product is mixed with a hardener and applied like ordinary paint in a number of layers, but with advance preparation of the body.

Among the advantages of such products, it is worth highlighting high-quality protection against anything: moisture, stones, branches, mechanical stress, rust, etc. The product interacts powerfully with the coating and does not need a special room for the processing procedure.

1 place. "Raptor"

Raptor car paint is a good two-component urethane-type product that is designed to protect car paintwork from water, pollution and other negative environmental influences.

The composition protects against the formation of mold, rust and the effects of exposure to sudden temperature changes. After applying the composition to the body, the level of resistance of the coating to the influence of UV rays and mechanical damage increases.

The composition also restores already destroyed surfaces to the maximum. At the same time, the paint is available in different colors - from bright yellow to dark blue, so that any driver will choose the right option for himself.

The average price is 5,200 rubles.

• economical consumption;
• applied by different methods: with a brush, sprayer or roller;
• dries quickly;
• in the process of use, the layer does not fade;
• reduces noise and vibration threshold.

• some buyers thought the cost was too high.

2nd place. "BRONIATOR"

The protective type coating "BRONIATOR" is a heavy-duty automotive paint, which contains a lot of polyurethane. After the interaction of the components and full polymerization, it creates 95% polyurethane.

The formula does not differ in increased density, therefore, after processing, an even texture is formed on the car body.The tool is easily applied to the surface with a gun (2-2.5 mm), which allows you to get a smooth shagreen without loss of strength. After drying, a matte heavy-duty layer is formed, which can withstand enormous mechanical stress.

The average price is 1250 rubles.

• after the interaction of the components forms 95% polyurethane;
• operating temperature ranges from -60 to +100 degrees Celsius without loss of strength;
• protects the car body from physical and chemical influences;
• excellent indicators of elasticity;
• high adhesive properties in relation to the surface.

• not detected.

Conclusion

After carefully analyzing the comments on the forums and reviews of different types of products, we came to the conclusion that there is no common point of view regarding a particular brand or type of protective coating among drivers. Each tool has its fans and opponents.

In this regard, there is probably only one truly effective method to minimize the likelihood of applying a low-quality product. It lies in the fact that before applying this or that composition to the body, it is better to pre-process some minor detail and see what comes of it.