Rating of the best plate compactors for 2022

Vibrating plates are used for compaction of various surfaces. The units are classified according to the type of fuel used, which will act as the main source of energy. There are electric, diesel and gasoline installations. Based on the dimensions, they are divided into heavy, medium and light. The total weight will be 45-450 kg.

What is it and what are

Before starting construction work, preliminary preparation of surfaces and compaction of bulk materials are required. These may be:

Chernozem	Gravel	rubble
Clay	Asphalt	paving stones
paving slabs	Sand	Other materials

Light products are used to compact the soil during landscaping and dense laying of paving slabs. Medium ones are able to cope with any tasks, so they are classified as universal installations. It is these models that are in high demand and are considered in demand in the modern market. Heavy vibrating plates belong to the category of professional equipment, which is used for laying the base of the foundation, paving stones, sidewalks and road construction. Thus, it is possible to improve breathability and fill the existing voids. The bearing properties of the soil are increased.

If the work surface is not properly prepared, then in consequence the destruction of the coating, foundation and other troubles is possible. By means of a vibrating plate, it is possible to evenly compact the working surface. It is used on construction sites and places where the use of massive equipment is not possible or appropriate.

Among such cases:

1. Sloped area.
2. Small playground.
3. Elimination of holes and potholes in the road surface.
4. Installation of paving slabs or paving stones.

The best manufacturers of vibrating plates with gasoline drive

Budget designs with clearly defined functionality.They are in high demand, as their cost is significantly lower than similar designs with a diesel engine. They are not tied to a single power source, so they can move freely throughout the construction site. With the indicated functions, they will cope both in heat and frost. Among the main mistakes when choosing, the presence of significant noise and low weight of devices is noted. According to buyers, these factors will not solve certain problems.

CHAMPION PC5431F

One of the best vibrating plates of gasoline type. Belongs to the category of linear. The description indicates a four-stroke engine with a power of 2.3 hp. The declared impact force is 8.2 kN. The design is not suitable for professional work, however, for infrequent or one-time use, this option is considered optimal. The popular model can be used both for laying yard tiles and small repairs. The manufacturer declared the vibration frequency - 5140 beats per minute. Sealing is carried out at a depth of up to 20 cm. For the manufacture of the case, high-strength plastic is used, which guarantees the protection of individual mechanisms that are afraid of impacts of small stones and rubble.

Can be purchased at a price of 27,000 rubles.

• dust protection;
• comfortable handle (adjustable in height);
• fairly accurate oil sensor;
• depreciation system, due to which the wear of individual components is reduced;
• operational period.

• a lot of noise;
• light weight (50 kg).

Elitech PVT 60 BVL

Reliable and inexpensive tool equipped with a four-stroke engine. Centrifugal force - 10.5 kN, with a power of 6.5 hp. The design is equipped with wheels that can be screwed if necessary.Thus, the device becomes more mobile and can move around the construction site. Ergonomic handles can be folded and unfolded, which simplifies not only the process of transportation, but also storage. An irrigation system with a volume of 10 liters was installed. The provided anti-vibration system allows to increase the operational life of the engine. The protective casing is responsible for protecting the transmission. Working range -10°С — +40°С.

The average price is 37,000 rubles.

• build quality;
• starts "with a half turn";
• wheels included;
• folding handles;
• anti-vibration system on the engine;
• operational period;
• protective cover;
• uninterrupted operation;
• the engine is placed on a reinforced frame.

• excessive vibrations cause the bolts to loosen frequently.

Red Verg RD-29155

A novelty among linear vibratory plates. The popular model is equipped with a four-stroke gasoline engine. Impact force - 13 kN with a power of 6.5 hp For greater ease of use, the design is equipped with a built-in irrigation system. Using a volumetric tank, you can moisten the surface immediately before starting installation work. For laying paving stone or paving stones, a polyurethane cushion is used, which is provided by the manufacturer in the kit. The soft material that covers the handle dampens most of the vibrations. Drive belts are protected by a special casing. A thick sheet of stamped steel is used as the base.

Cost - 39,000 rubles.

• the model is equipped with an irrigation system;
• polyurethane pillow;
• protective cover;
• ease of management;
• reinforced bottom;
• based on numerous reviews, this is the best model in terms of price / quality ratio.

• not identified.

DDE VP160-HK

Popular reversible model. Equipped with a gasoline engine from Honda. The impact force declared by the manufacturer is 30.5 kN. A great option for lovers of a neat and well-groomed summer cottage, who in their free time seek to earn extra money by carrying out minor repair and construction work. High performance design with 6.5 hp engine. In one pass, the unit compacts the soil by 0.5 m. Efficient selection and transmission of torque due to the three-jaw clutch. The rotor is equipped with reinforced bushings. The engine is placed on a solid mount, due to which the manufacturer has achieved a high indicator of reliability and performance. For ease of movement, the wheels that come with the kit are used.

You can buy for 120,000 rubles.

• ease of use;
• use of high quality raw materials;
• powerful engine;
• transport wheels are included;
• reinforced steel bushings;
• operational period;
• powerful engine;
• high performance.

• not identified.

CHAMPION PC9045F

It is such a firm that it is better to buy a vibrating plate for frequent use. The recommended model is equipped with a four-stroke gasoline engine. The declared impact force is 15 kN at a power of 6.5 hp. It is recommended by experts, as it belongs to the types of professional equipment. We advise you to buy for those people who plan to compact sand or gravel, lay asphalt in the local area, restore (partial) road surface. There is an oil sensor that will indicate a critical fluid level.

For accelerated starting, a manual starter is used. Design features allow you to work in close proximity to the wall, curb, trench and poles. In an hour, the builder will be able to compact 416 square meters of surface.

Where to buy such equipment? In the online store or the nearest construction market of the city. The average purchase price is 38,000 rubles.

• oil sensor;
• wear protection (if there is not enough oil, the engine will not start);
• manual starter;
• work in hard-to-reach places;
• 3.6 l tank;
• quick start at low temperatures;
• rubberized handles.

• not identified.

Rating of quality vibrating plates with diesel drive

This type of equipment does not start well in cold weather, and the operation process is accompanied by noise. However, among the main selection criteria that the buyer pays attention to in the first place, there are such aspects:

1. Independence from external power sources.
2. High service life.
3. High degree of reliability.
4. Simplicity in management.

WACKER NEUSON DPU 3050 H

The country of manufacture of the brand is Germany, which already speaks of the high build quality and positive tests for strength and endurance. If you plan to purchase a high-quality, powerful and reliable vibrating plate, then this model is the best that the modern market can offer. The purchase will be successful only if the person is not constrained by means. Otherwise, it will take several years of hard work to recoup the costs. The cost is due to the fact that the manufacturer offers high-quality equipment belonging to the professional category. It is calculated on work in difficult conditions and at serious loadings.

The device can cope with any tasks in a relatively short period of time. Productivity - 650 square meters per hour, which is considered a high figure. With an impact force of 30 kN, compaction is carried out to a depth of 0.5 m. The engine power from the Hatzer brand is 9 hp. At a flow rate of 0.6 liters per hour, the efficiency indicator is maximum. It should be noted that the possibility of self-repair. The price of components is acceptable, so no special costs are foreseen.

Cost - 450,000 rubles.

• the best model for the corresponding price;
• build quality;
• the possibility of self-repair;
• simple replacement of components;
• power;
• quality of work;
• professional equipment designed for large venues.

• price.

HUSQVARNA LG 204D 500MM

A popular product from a time-tested Swiss brand. For most people, this concern is known as one of the best motorcycle manufacturers. Including the manufacturer is engaged in the assembly of garden equipment, and vibrating plates in particular. One of the best products, no matter how you look at it, except that the price bites. However, the cost is more than justified due to the durability, versatility and reliability of the tool. The engine installed is not the most powerful (4.3 hp), but the impact force of the product is 38 kN, which is considered more than a high indicator.

The declared speed is 3000 rpm, and the tamping depth is 40 cm. The indicators are not the highest, but they allow you to work under high loads. Ergonomics deserves special attention. The handle is movable, so it can be adjusted to any height.The manufacturer has applied a complex innovative vibration damping system, which will be appreciated by those operators who have had to work with equipment of this type.

How much does the kit cost? The purchase will cost 420,000 rubles.

• ergonomics;
• build quality;
• vibration damping system;
• hardy engine;
• professional model;
• durability;
• practicality.

• price.

SHATAL PC-2014D

If necessary, the model can be ordered online directly from the manufacturer's website. First of all, when describing a product of their own production, manufacturers focus on the most important, in their opinion, criteria. A design feature is considered to be a pre-installed (unique) vibration damping system. The parameter, without a doubt, is important, since the usability of the equipment as a whole depends on it.

A high vibration rate will make the operator's work tense, and therefore short. All firms, without exception, are working on solving this problem, but they have not yet succeeded in what Shatal engineers could bring to life. The plate functions flawlessly, however, according to users, the point is not the length of the sole, but the average engine power. Vibration has been reduced by flexible connection of the tubular handle to the base. Here the manufacturer had to sacrifice build quality.

Price - 230,000 rubles.

• a unique vibration damping system was used;
• duration of work;
• Ease of use;
• the possibility of replacing individual components;
• compaction of 25 cm of the surface in one pass;
• high-quality engine judging by the photos offered by the brand.

• Chinese assembly;
• impact force - 20 kN;
• mediocre device for a lot of money.

MASALTA MSH160R-1S

The initial review showed that the model is considered one of the most compact on the market today. Many buyers pay attention to the mark "made in China" and in this case, fears are justified. The assembly leaves much to be desired, however, minor repairs can be carried out independently, without involving expensive specialists. Dimensions managed to be reduced through the use of a diesel engine, which is more compact than a gasoline counterpart. A prime example of how a high-performance design can fit into a small package.

The main feature of the product is considered to be the possibility of processing complex areas, which are characterized by the presence of potholes and other irregularities, including slopes. Thanks to a small plate and compact dimensions, the unit is able to climb even into the most inaccessible places. Power - 30 kN, which allows you to process about 650 square meters of area within an hour. It works on the basis of a 4.3 hp engine, which is an acceptable indicator. Can be found on highways and highways.

Price - 135,000 rubles.

• compactness;
• mobility;
• performance;
• Ease of use;
• maneuverability;
• ergonomics;
• operational period.

• Chinese assembly;
• price;
• not suitable for all types of work.

ZITREK CNP 330А-3 AES

It is characterized by the presence of the latest control system. The country of origin of the product is the Czech Republic. On the territory of the country, it is considered the unofficial leader in the production of high-quality vibrating plates and other garden and industrial tools equipped with a diesel drive. A model worthy of consideration, which will become a practical solution to the problem that has arisen.Among similar products has an acceptable price tag. What causes it is not clear.

The declared technical characteristics are beyond praise. An engine with a power of 13 hp is installed, and the possibility of compacting material up to 1 m deep. The impact force reaches 40 kN. Within an hour of continuous operation, the unit will process over 650 square meters of the site. The performance is high compared to models of a similar price category. I got into the TOP by right, but many are confused by a high indicator of strength. The structure is tall, even for asphalt paving. There are not so many cases in which you need to use a specific model.

Cost - 210,000 rubles.

• specialized equipment;
• big weight;
• build quality;
• height.

• impact strength;
• narrow unit.

Rating of the best vibrating plates with electric drive

Such products are characterized by relatively low weight, high environmental friendliness and low noise level. This allows the units to be used indoors (no emissions are observed due to the lack of an internal combustion engine). The power cable is the only limitation of the working area. Due to the fact that the operation of the unit requires an uninterrupted power source, models are used less frequently.

 

VIBROMASH VU-05-45 220V

The country of origin of the product is Russia, so there will be no problems in finding auxiliary components and parts for replacement. Vibrating plate of electric type. Belongs to the category of the simplest devices. Represents the mobile metal platform equipped with the ergonomic handle. It has a vibration motor. Engine with a power of 0.5-1 kV (depending on the type of product).Both options will allow you to easily connect to your home network. There is no complex system for connecting wires; they have been replaced by a regular plug.

Using the device, you can compact a layer of up to 30 cm. It is not possible to calculate the exact quadrature of the working surface, since there are some restrictions regarding the motor. Gravel and sand compact quickly. Asphalt laying will take more time. Although the manufacturer claims that the tool is designed for road work, according to buyers, this model is the perfect solution for a summer cottage.

Price - 24,000 rubles.

• high engine resource;
• assembly;
• the duration of the manipulation;
• regular plug for connecting to the network;
• for home use.

• the scope depends on the length of the cable;
• different tamping time for each type of material.

RED LIGHTHOUSE VU-05-45

Compact model from a domestic manufacturer. Professional type unit. It is intended for road works and other tasks implying increased load. In practice, no one seeks to acquire an electrically driven vibrating plate, and the manufacturer understands this. The declared scope of work is household plots, private and summer cottages. Perfectly copes with loose surfaces of any type. Tamping is carried out to a depth of 15 cm. For personal use, the indicator will be enough. An engine of 0.5 kV was installed, which is not enough for the arrangement of road surfaces. For connection, a household socket and an extension cord (if necessary) are used. Own cable length - 2 m.

Price - 26,000 rubles.

• for private use;
• compaction depth;
• economical consumption;
• build quality;
• ergonomics.

• length of cable.

SHATAL PC-1443

High-strength construction, which is assembled in China. Chinese engineers often succeed in what other manufacturers fail to do. This model is supplied to the European market not only with an electric drive, but also with diesel or gasoline. Configurations that remain unchanged deserve special attention. Such information is doubtful, because each of the drives is designed for a different degree of load. A feature is the presence of a proprietary vibration damping system.

Price - 122,000 rubles.

• covers up to 25 meters of area per minute;
• force indicator - 13.5 kN;
• engine - 3 hp;
• configuration.

• assembly;
• price;
• excessive vibration.

STROYMASHSERVIS IE-4509 A

The simplest device with a minimum number of options. Thanks to this, the manufacturer managed to reduce the cost of the product. The country of manufacture is Russia, which indicates the high quality of the raw materials used, the assembly and the possibility of purchasing individual elements for subsequent repairs. It should be noted that the installed drive of the electric type automatically imposes a number of restrictions on the device, the key of which is power. It is also necessary to remember that the device is powered by a household network, so the design can not be used at every construction site.

An electric drive is not able to compete with gasoline or diesel counterparts. It is preferable to use such devices in summer cottages and household plots. In this case, there is no need to ram the soil a meter deep.The device is able to eliminate irregularities and voids in a layer up to 20 cm thick, which is an acceptable indicator. The declared power consumption is 250 watts (connection to a household network is acceptable without the risk of overload). There are no design features. The only difficult connection is considered to be a flexible hitch between the plate and the handle. The achievement is mediocre, however, the model has no right to claim otherwise.

Cost - 28500 rubles.

• acceptable engine life;
• model for private use;
• connects to the network through a plug;
• duration of work;
• build quality.

• not identified.

Rating of the best vibrating plates with hydraulic drive

Vibrating plate reversible TSS MS5030-H

The design is equipped with a reliable hydraulic drive. The product of a domestic brand, which is in deserved demand among compatriots. This series of hydraulic attachments is based on the latest development. Reciprocating devices are designed for harsh working conditions. We are talking about the repair of urban and main roads, the laying of cables, as well as pipelines. The device allows the adjustment of compaction forces, which will allow the unit to work with surfaces of any type.

Cost - 125,000 rubles.

• hydraulic drive (more reliable than mechanical);
• wide range of use;
• high maneuverability;
• drive protection;
• cast plate;
• strength;
• operational period;
• low vibration;
• hose for easy draining of oil;
• wheel set;
• reliable hydraulics.

• not identified.

NTC VDR75HE

The installation is assembled in the Czech Republic. Compaction force - 75 kN. The device is intended for laying sewer systems, making pavement, preparing sites for the foundation of massive structures. The device allows you to adjust the pressing force, which makes it possible to work with materials of any kind. The plate moves smoothly. The operator should also have no problems in the control process. The board edges are hardened and fully balanced. The control knob works not only as a safety, but also for reverse movement.

Price - 42,000 rubles.

• manufacturer's warranty - one year;
• strength;
• operational period;
• build quality;
• application range;
• ergonomics.

• vibration index.

NTC VDR63HE

The product is made in the Czech Republic. The manufacturer provides a 12 month warranty. Compaction force - 63 kN. Reversing device equipped with an electric start. It is used for leveling trenches, foundation sites, sand, crushed stone, gravel. Takes an active part in the arrangement of the site intended for roads. Ease of operation and smooth running due to the stepless speed adjustment of the key element. The edges of the plate are hardened, which favorably affects the operational life of the product.

Cost - 28,000 rubles.

• design;
• ergonomic handle;
• oil sensor;
• hydrostatic control;
• powerful engine;
• one-piece frame (protective);
• compaction depth up to 85 cm;
• wear-resistant movable plate;
• structural durability.

• not identified.

Conclusion

The modern world does not stand still.Every year, road and construction equipment undergoes qualitative changes for the better. Over time, the equipment becomes more productive and efficient, which is due to a number of advantages:

1. Increased service life.
2. Reducing the cost of repairs and subsequent maintenance of equipment.
3. Saving time and labor.

It is easy to make a mistake when choosing such equipment, and we are not talking about the technical features of a particular model at all. Some manufacturers are more conscientious, while others prefer to save on everything. Before buying a vibrating plate, it will not be superfluous to get an experienced consultation from a specialist. This is the only way to get proven and really high-quality equipment.