Ranking the best brake calipers of 2022

The mechanisms described below are an important part of the design for cars or trucks of domestic, foreign production. Typically, a caliper is installed on each wheel, its cost, as a rule, is from 5,000 to 40,000 rubles. They press the pads against the disc, preparing them for braking, after which the car slows down and stops. It is important to check the device each time a tire is changed.

In our review, we will provide recommendations: what to look for in order not to make a mistake when choosing a caliper, which company model is better to buy. We will get acquainted with popular manufacturers, a description of their devices, and we will orient you at an average price.

Types of car calipers

It is important to clearly distinguish between two types of mechanisms available on the market, let's consider what they are:

1. In the fixed design, hydraulic pressure is applied to one, two or more pistons during the braking process. They are located opposite each other, thus creating a tension that presses the pads to the disc. Depending on the force applied to the pedal, the distance to a complete stop changes. When the brake is released, it ceases to exert pressure on the circuit and the pistons return to their original position.

This process occurs due to sealing rings, flat gaskets. Their function is to compress the hydraulic fluid inside the system, which pushes the piston back. This delay is called the backswing and is typically around 0.15mm. These seals allow the pistons to slide the required distance. Thus, the weakening of the stroke is maintained.

2. The floating (sliding) caliper during the process of stopping the car, thanks to the hydraulic fluid, acts on the piston, which presses the inner pad directly against the rim. This process causes the device to slide against the movement of the piston along the guides, thus pressing the outer stop. At this time, both pads work with the same force.During the release of the brake and the cessation of creating pressure inside the circuit, the flat gasket, the sealing ring, being deformed, returns the piston to its original state.

"Floating" devices are the most widely used on the market due to their versatility and ease of manufacture.

As mentioned above, the mechanisms that stop the car are one of the most important elements for achieving optimal and safe operation of the system while driving a car. If calipers have lost efficiency due to poor sliding of their components, they can cause overheating that will be transferred to the discs and pads, so it is important to look after them first, repair and lubricate them if necessary.

How to choose the right device

Be careful when buying car calipers, decide on the selection criteria, the required functionality. With our advice, you will avoid the most common mistakes when searching for the right product.
Below we will clarify various issues related to the design of your car, including:

• What should be considered when choosing a device?
• What are the differences between car stop systems?
• What keys are needed when replacing a product?

The function of the machine's caliper is to transmit pressure from the pedal through the master cylinder, piping and hose to the shoe. Then it is pressed against the disk, and due to the resulting friction, the car stops. Of course, this system also uses ABS, ESP, mechanical brakes, and hydraulic fluid as the transmission medium. But the caliper does the hardest work. What you should pay attention to when buying a suitable product:

• it is important to purchase all the necessary parts to replace the device: bleed screw, piston and repair kit;
• it is necessary to order mechanisms for each side of the car, the installation must take place on the left, on the right, in accordance with the brand of the car;
• special tools may be required to replace the device;
• there should be a supply of brake fluid in case of possible leaks;
• before ordering, carefully check the information about each offer and, if possible, compare it with the mechanism installed on your car.

What are the differences between different models and what determines their popularity? The caliper acts as a drive for the hydraulic system. It is built in many variations and adapts to the required performance depending on the budget available to you.

The best alloy wheels provide a direct view of the high performance calipers. Many of them are highlighted in different colors to show that this is a premium system capable of taming large displacement engines.

Usually budget models are hidden by steel plates or so-called caps. However, many drivers still attach great importance to having their calipers clearly visible, which adds to the visual appeal of the car.

Before the advent of modern systems, drum designs were common in cars. With an increase in engine power and speed, disc brakes were introduced into mass production, and with them, as part of the system, calipers appeared.

To your attention models of various designs, such as fixed, floating, rail clamps.

Most machines use frame or cam types, also known as floating.Combined devices additionally take over the function of the parking brake. It is in this segment that the development of electric handbrakes (“TRW” system) is observed.

An attempt to fully electrify the mechanism has been made several times, but has not yet been entrenched in mass production. The number of pistons used indicates the speed of stopping after pressing the pedal, the more there are, the faster the deceleration of the car. For this reason, fixed-caliber multi-piston models are used in high performance engines. The market leader, synonymous with this technology is the Brembo brand.

There are a number of companies specializing in the trade of complete brake systems. Brands mentioned in this segment include Wilwood, AP, Movit, Performance Friction and, of course, Brembo Racing. Nodular cast iron is often used as the material for standard models. When performance and light weight are dictated by design specifications, high-strength aluminum alloys are used. Pistons are made of gray cast iron, steel, titanium, or injection molded plastics.

Since the mechanisms are hollow bodies, inside of which a liquid circulates as a transmission medium. It must be possible to pump through the so-called exhaust valve. This is often a cause for concern because it is difficult to detach after a long period of use. Sometimes it breaks down due to temperature fluctuations, dirt getting into the system, or brake wear. It is important to take this into account when choosing.

In the event of a hydraulic fluid leak, rigid pistons or fixed guides will require replacement or repair.Remember that complete calipers are offered as spare parts. Often old elements are completely disassembled, cleaned and installed on new pistons, guides and seals. The quality of the refurbished devices is not inferior to the new ones.

When replacing calipers, check the entire system for any damage. Pay attention to discs, pads, hoses and hydraulic fluid.
The hose is often one of the reasons for the need to replace the mechanism. It is strongly recommended to use a line wrench and anti-corrosion agent during maintenance, because damage to the fixed part of the system will cause the brakes to fail again.

When replacing the product, problems may occur during the removal of the hose (similar to the drain valve). There are special keys for this task. There are more and more opinions that when replacing a mechanism it makes sense to completely change the hydraulic fluid.

Where could I buy

Budget are purchased at car dealerships, supermarkets. Managers will tell you the points you are interested in: how much the model you like costs, what they are. The product can be viewed in the online store by ordering online.

Rating of quality brake calipers 2020-2021

Our list is based on real reviews, it takes into account the opinion of buyers familiar with the product, its functions. Here you will find photos and comparison tables.

Inexpensive

Xiaomi Mijia M365

To your attention, the brake caliper for the Xiaomi Mijia M365 electric scooter is a high-quality spare part that will replace the broken original part without unnecessary difficulties. The model has a simple, reliable design, it is completely ready for installation. The set includes pads and screws for fixing.

Technical indicators:

Options	Characteristics
Producing country	China
Material	metal alloy
Type of	for electric scooter

• reliable mechanism at an affordable price.

• not detected.

NK 2145204 for Toyota Avensis, Toyota Corolla Verso

The NK 2145204 model deservedly takes its place in our list, which is installed on the front right rim for Toyota cars. The device has reliable components, seals, bolts. Ethylene propylene rubber parts are used inside the structure, which guarantee excellent resistance to overheating, rust and hydraulic fluid leaks. They are very easy to install by yourself using mounting tools, hardware and gaskets. In the design of "NK 2145204" one can note the absence of a protective coating, which is common for budget models.

Technical indicators:

Options	Characteristics
Cylinder piston diameter, mm	38
For brake disc thickness, mm	10
for brake disc diameter, mm	280
Type of	Brake caliper (1 piston)
Material	Aluminum
Manufacturer Restriction	Bosch
Paired article numbers	2145203
Installation bridge	Front
Installation side	Right

• acceptable price;
• simple installation.

• discovered

ASAM 30280 for Renault, Dacia, Lada

"ASAM 30280" are designed from a durable material that reduces noise, reduces the accumulation of dust inside the structure. Each one is manufactured using high quality parts, seals, pins, bolts and hardware to ensure a solid fit. Another benefit is the reliable bleed screws, which prevent unwanted deposits from entering the system.

The device is easily mounted using brackets. It can be installed as a replacement for front or rear calipers. "ASAM 30280" do not have a powder coating, so they are prone to corrosion, rust. The device is only suitable for certain vehicles. Before buying, it is important to make sure that "ASAM 30280" fit your vehicle.

Technical indicators:

Options	Characteristics
Installation bridge	Front
Installation side	Right
Number of pistons	1
Cylinder piston diameter	48 mm
Car model	Dacia Logan 1.2 / 1.4 / 1.5 / 1.6 (2004 - ); Dacia Sandero 1.2 / 1.4 / 1.5 / 1.6 (2008 - ); Renault Logan 1.4 / 1.5 (2004 - ); Renault Sandero Stepway 1.4 / 1.6 (2007 - ); Lada Largus 1.6 (2012 - 2019)
Vehicle type	Cars

• easy to install;
• reliable design;
• dust does not accumulate;
• high-quality elements: seals, pins, bolts;

• not detected.

Medium

ADVICS left, art. A5L044

ADVICS has been developing auto parts for many years, and its devices are in great demand. Each of its mechanisms is pressure tested, which guarantees safe, convenient and efficient use of the product. These special calipers are made of aluminum, cast iron, which greatly increases the reliability, quality of your braking system.

ADVICS uses Ethylene Propylene Rubber (EPDM) components which provide excellent resistance to heat, corrosion and leakage. They are fairly easy to install yourself using mounting brackets, hardware, and copper sealing washers. One disadvantage is that "ADVICS" do not have a protective coating.

Technical indicators:

Options	Characteristics
The code	UQ131076
vendor code	A5L044
Brand	ADVICS
Weight, kg	4.85.
Volume, m³	0.006128

• the product is pressure tested;
• aluminum, iron casings;
• durable construction;
• easy installation.

• no powder coating.

TRIALLI CF 102064 for Ford Focus

The popular brand "TRIALLI" has a technological production. Its products are 100% pressure tested to prevent hydraulic fluid leaks. The devices have new components, so they are reliable, safe during the process of driving, intensive braking.

In addition, TRIALLI products use high-temperature alloys inside, which extend the life of the product by increasing traction during a stop. The mechanism has an electrostatic protective layer that resists corrosion. Calipers may not come with bleed caps.

Technical indicators:

Options	Characteristics
Installation bridge	Rear
Installation side	Right
Number of pistons	1
Cylinder piston diameter	38 mm
Disc thickness	11 mm
Car model	Ford Focus II (05-)
Related OE codes	1223704 1324304 136564833M51-2M088-AA 3M51-2M088 -AB 3M51-2M088-BA BP4K-26-980A BP4K-26-980B BPYK-26-61X BPYK-26-61XA BPYK-26-61XB 36000903 8602912 8603333
Vehicle type	Cars
Brake system	TRW

• look great;
• strong, durable construction.

• not detected.

Great Wall Deer

We recommend Great Wall Deer for their reliability, high quality, compatibility with BMW X2 vehicles and others. Before buying, you need to make sure that this model is compatible with your vehicle.Since the Great Wall Deer has an official approval certificate from BMW, you can be sure that the part is a direct replacement for the OEM. This simplifies installation, the product will work correctly for a long time.

Unfortunately, this model does not come with a brake shoe and hardware required for installation. This means that you will need to buy everything separately. The product does not have a powder coating or other protective layer, so it lacks an attractive design and corrosion protection.

Technical indicators:

Options	Characteristics
Manufacturer	GREAT WALL CHINA-PARTS
vendor code	Q3501100D01
Producing country	China
Bridge	Front right

• reliable design;
• price-quality ratio.

• not detected.

MANDO EX583101RA30

MANDO" are deservedly on our list, the organization is engaged in the production of kits for the front and rear axles of various car models. They feature brand new features including seals, springs, bushings, bleed screws and hardware. Each has been pressure tested to make sure they work properly and stop the machine quickly.

As an additional advantage, the durability of this model can be noted. Thanks to this, they not only look great on your vehicle, but are also protected from rust, corrosion. "MANDO" are intended only for certain brands of cars, a complete list of them can be found on the manufacturer's page. In addition, the devices are relatively expensive compared to similar models.

Technical indicators:

Options	Characteristics
Installation bridge	Rear
Installation side	Left
Car model	HYUNDAI Solaris (2011-), KIA Rio (2011-)
Related OE codes	EX583101RA30
Vehicle type	Cars

• powder coating;
• simple installation.

• only suitable for certain car brands.

Expensive

Ssangyong 4841008001

Your attention is another set from "SsangYong", it falls into our review due to its simple design, powerful stopping ability. The mechanism is made of premium alloy, which improves the performance of the product and significantly reduces the braking distance. "SsangYong" are made on high-quality equipment, contain brand new components that can serve you for a long time.

"SsangYong" have an aluminum tint, the model perfectly fulfills its functionality, it is installed quickly and easily. If you're looking for a good quality set, this set is worth a look. Of the minuses, one can note not the most attractive appearance, the lack of powder coating and coloring.

Technical indicators:

Options	Characteristics
Installation bridge	Rear
Installation side	Left
Related OE codes	Ssangyong 4841008001
Vehicle type	Cars

• new components;
• pressure tested;
• durability;
• increased productivity;
• short stop time.

• unattractive appearance;
• without powder coating.

MERCEDES-BENZ VW FTE RX529824A0

This popular model from a German manufacturer is a direct replacement for your OEM part. They are sold with 100% SAE compliant rubber seals, copper washers. The spare part can be easily installed thanks to special keys. The entire caliper is treated with a rust inhibitor to maintain its appearance and prevent corrosion.

Each mechanism is 100% pressure tested to ensure that the design will not fail at the right time. "MERCEDES-BENZ VW FTE RX529824A0" is a highly functional, reliable component that will last your car for a long time. Rubber seals are made to work at high temperatures, which prolongs their life. These calipers are brand new. Unfortunately, they do not have a color scheme, so they do not have an attractive appearance and protection from the weather.

Technical indicators:

Options	Characteristics
Producing country	Germany
vendor code	RX529824A0
Brand	FTE
brand	mercedes benz
Model	Sprinter
Analogues	0044205883, 2E0615106C

• new item;
• reliable construction.

• not detected.

581804FA00 PORTER2

Your attention is the front left clamp without pads "PORTER2" for cars "Hyundai". The part has a reliable design, painted in dark green. The mechanism is quite simple, with the help of brackets, mounted on the corresponding bridge of the installation.

It can be purchased as a replacement for the front or rear shoe clips. "PORTER2" does not have a powder coating, so it is weakly resistant to corrosion and rust. The device is only suitable for certain vehicles ("Hyundai"). Before buying, you need to make sure that the product can be fixed on your vehicle.

Technical indicators:

Options	Characteristics
vendor code	581804FA00
Manufacturer	Dashi
Analogues	581804FA00, DFA024FL
Automobile	Hyundai Porter 2
Applicability	Porter2
Installation bridge	Front

• not a high price.

• not detected

We hope this review will help you navigate the characteristics of brake calipers, and you will be able to choose the right product.