Ranking the best brake drums for 2022

Drum brakes are still used in the automotive industry, so the best manufacturers are trying to release new models with improved technical characteristics. Braking efficiency will depend on the quality of the purchased products, so it is important to know how to choose the right options not only for the price, but also for the technical features. In the article, we will consider recommendations for choosing what new and popular models are on the market, what mistakes you can make when choosing.

Description

Brake drums were designed back in the 19th century. At the beginning of the 20th century, the design underwent significant changes. Also, this device performs the functions of a hand brake.
Drum brakes compare favorably with disc brakes not only in savings in production, but also in greater efficiency and longer service life.

Design

Inside are the following items:

• brake pads (each manufacturer has its own composition, they are kept secret);
• one or more hydraulic cylinders;
• protective disk;
• retainer;
• coupling springs;
• hairpins;
• self-advance mechanism;
• shoe spacer;
• block supply mechanism.

Principle of operation

When you press the brake pedal, there is pressure in the working fluid system. It acts on the piston of the brake cylinder, the last element actuates the brake shoe, which is located on the sides and is in close contact with the drum. Accordingly, the speed of rotation of the part decreases and due to this, the speed of the car decreases.
Modern technologies provide the fastest possible braking, despite the condition of the roadway.

Pros:

• inexpensive to manufacture, much cheaper than disk options;
• the resource is more than that of disk ones by 30-40%;
• less likely to change.

Minuses:

• slow down worse than disk ones;
• dirty inside.

Kinds

Consider the types depending on the installation location:

1. Front. Installed on the front axle.
2. Rear. Installed on the rear axle.

Consider what types of brake drums are depending on the material of manufacture:

1. Aluminum. They are more popular, they are lighter than cast iron ones, they cost a little less, heat up poorly and cool down quickly, which is an important factor in the operation of the brake system. Practically does not suffer from corrosion and has a more presentable appearance. Of the minuses, one can note rapid wear, fragile, it is difficult to remove them, they “stick” to the surface.
2. Cast iron. Several times heavier than aluminum, but much stronger. They do not stick so much, they do not deform during temperature overloads. Less effective in braking, heavy.

Top Producers

Consider the most recognizable and reliable manufacturers:

1. AUTOREAL. The manufacturer guarantees that braking will be smooth and the pads will not knock during operation. It is the first Russian company to produce lightweight cast-iron brake drums. Products are resistant to deformation, have a long service life and there are no vibrations during operation. Of the minuses, it can be noted that cast iron (even lightweight) options are heavier than aluminum counterparts.
2. ZEKKERT. An actively developing Chinese company, the official office is located in Germany. The main difference in the market is that they provide the best price-quality ratio for their products. Their products have high quality raw materials, a pleasant appearance, but at the same time, deformed parts come across.
3. PILENGA. A fairly large company, its production facilities are located in Japan, Italy, Europe, America, Asia. More than 35% of products are brake systems. Precise geometry and high quality alloy guarantee trouble-free operation in all weather conditions.The products have a long service life, there is no vibration in operation, and high-quality braking is ensured. However, parts are subject to corrosion.
4. TRW. The products of this company occupy almost 50% of the European automotive market. Innovative developments have made it possible to create a series of products with quiet and smooth operation. The components have a good service life, provide smooth braking in any weather and work quite quietly. However, fakes are very common.
5. AND THOSE. Part of a large German concern. The regulated service life of spare parts is 130,000 km. Goods have a long service life, effectively slow down and in some modifications there is an anti-corrosion coating. Of the minuses, you can answer the expensive cost.

Criterias of choice

Tips on what to look for when choosing:

1. Material. If you plan to lighten the weight of the machine and the load on the rear axle, then choose an aluminum drum, but if you need durability and reliability, opt for the cast iron version.
2. Which company is better. When choosing, the model and brand of the car are important, the brake drums of domestic and foreign companies have the same functionality, so when choosing which one is better to buy, be guided by your needs and capabilities.
3. What is the price. The cost will vary depending on brand awareness, delivery and material of manufacture. On average, the price range is from 500 rubles to 8500 rubles. Budget models will be less durable and more efficient, but it’s also not worth overpaying just for the brand.
4. Reliability. Be sure to check the compliance of the purchased goods for compliance with international quality standards.Regardless of where you buy, ask the seller for all the necessary documents and certificates. It is also important that all products pass all the necessary tests for balance, weight, geometry, static stiffness, behavior when heated, etc. Your health and your life depend on the reliability and efficiency of the system.
5. Original. Try to purchase original spare parts for your car, cheap fakes (analogues) may not be suitable in terms of technical parameters, or have low performance, cannot do their job, then you will overpay for a second purchase.

Rating of quality brake drums for 2022

The rating includes the best models, according to buyers. The popularity of models, their review and consumer reviews were taken as the basis. The rating was divided into 2 large groups: domestic manufacturers and foreign manufacturers.

Models from a foreign manufacturer

BM-MOTORSPORT DR6035 cast iron, 203 mm

High product quality is achieved through the use of modern production technologies and innovative equipment. The part has high resistance to wear and overheating, long service life. Average price: 1701 rubles.

• quality material;
• verified manufacturer;
• durability.

• not identified.

Characteristics	Description
drum material	cast iron
Hole diameter (mm)	203
Installation bridge	rear
Drum weight (kg)	11.96

BAPCO BDR0087

The product has all the necessary quality certificates. The manufacturer's warranty is 2 years, the company ensures the exact entry (in compatibility) of the part. Mounting bridge: rear. Average cost: 1560 rubles.

• 100% applicability (compatibility);
• ease of installation;
• optimal price.

• not identified.

Characteristics	Description
drum material	cast iron
Quantity (pcs)	1
Dimensions (m)	0.33x0.32x0.095
Drum weight (kg)	7.745

OTAKA ABS for 1 bearing

Brake drum for 1 bearing. Good maintainability, long service life at the best price, favorably distinguish this manufacturer in the market. Average price: 960 rubles.

• good maintainability;
• ease of assembly;
• high build quality.

• not identified.

Characteristics	Description
Applicability	OTAKA
Quantity (pcs)	1
Drum weight (kg)	3.75

TRIALLI TF015132 /76187 2000

The cast iron drum of a well-known international company has high wear resistance and overheating resistance. Installed on the rear axle. The diameter of the central hole is 52. The inner diameter of the drum is 203 mm, the outer diameter of the drum is 234 mm. Average cost: 1710 rubles.

• optimal price-quality ratio;
• innovative production technologies;
• durability.

• without bearings and ABS rings.

Characteristics	Description
Manufacturer	TRIALLI
Parameters (mm)	204.5x50.5
Number of holes (pcs)	4
The maximum diameter of the boring drum	204.5
Internal height	50.5
Overall Height	76
Drum weight (kg)	11.966

BLITZ BT0137

The company is part of Carberry, specializes in the production of spare parts for the brake system. The packaging has not only a presentable appearance, but also contains all the necessary detailed information. Anti-squeal plates are included. Average price: 2286 rubles.

• detailed instructions for use;
• durability;
• verified manufacturer.

• hard to find on the market.

Characteristics	Description
Manufacturer	BLITZ; Germany
Parameters (mm)	207.9x65.7
Number of holes (pcs)	4
Drum weight (kg)	6.54

AC Delco 19372219

An American company with a long history of formation, uses its own innovative developments and advanced technologies to produce high quality products at low cost. We manufacture spare parts for both trucks and cars. Average cost: 3184 rubles.

• long-term warranty from the manufacturer;
• innovative manufacturing technologies;
• availability.

• not identified.

Characteristics	Description
Manufacturer	ACDELCO
Weight, kg)	4.4
Equipment type	cars
Installation side	rear axle

HERTH-BUSS J3401030

The hub diameter of the model is 52 mm, height 76 mm, diameter 203.3 mm. Manufacturer from Germany. The company guarantees the high quality of raw materials and the durability of its products. Compatible with cars: NISSAN MARCH III, NISSAN MICRA C+C, NISSAN MICRA III, NISSAN NOTE, etc. Price: 5508 rubles.

• perfect compatibility with NISSAN vehicles;
• long service life;
• quality raw materials.

• not identified.

Characteristics	Description
Manufacturer	HERTH-BUSS
Drum diameter	203.3
Number of holes	4
Chamfer diameter (mm)	100

JAPANPARTS TA600

Drum with 4 holes, with an internal height of 34 mm. The model can be used on various vehicles, applicability and compliance can be clarified on the website in the manufacturer's catalog. High resistance to overheating guarantees optimal performance in all weather conditions. Cost: 2942 rubles.

• wide application;
• resistance to overheating;
• reliable brand.

• hard to find in stores.

Indicators	Meaning
Drum inner diameter (mm)	165
Installation bridge	rear
Hub hole diameter (mm)	51.7

METACO 3070026

METASO is a dynamically developing company with 25 years of experience in the production of automotive parts. All products are subject to mandatory testing for compliance with international quality standards. Manufacturer's warranty up to 3 years. Cost: 2990 rubles.

• production is constantly being improved;
• great guarantee;
• reliable.

• price.

Indicators	Meaning
Applicability to cars	Mitsubishi Smart
Installation bridge	rear
Brand	METACO

From a domestic manufacturer

ATS 1118

The ATS company is one of the first domestic companies, which was one of the first to master the production of spare parts for cars. Cast iron is less prone to overheating and deformation than its aluminum counterpart. 2 year manufacturer's warranty. Average price: 1550 rubles.

• light weight;
• high manufacturing precision;
• less prone to overheating.

• not identified.

Indicators	Meaning
Material	pearlitic cast iron
Kit (pcs)	2
Dimensions (cm)	24x24x13
Drum weight (kg)	7

BULAT 2105

Lightweight and reliable drum, ideally compatible with AvtoVAZ vehicles. Manufactured by injection molding, followed by processing. Price: 1027 rubles.

• provides more reliable braking, in comparison with analogues;
• high quality material;
• ease of installation.

• not identified.

Indicators	Meaning
Material	Aluminium alloy; cast iron
Kit (pcs)	1
Manufacturer	LLC "NTC-BULAT"

Remoff G 3302

Made of high-strength cast, mounted on the rear axle.Designed for the brake system of the rear axle of GAZelle trucks and all modifications. Cost: 1968 rubles.

• reliable manufacturer;
• availability;
• easy installation.

• some parts require sharpening on a lathe.

Indicators	Meaning
Material	high strength cast
Dimensions (diameter and height) (cm)	32x12
Weight (kg)	13
Manufacturer	REMOFF

PAZ 3204 front/rear (brake incl. 160 mm)

Products of a domestic manufacturer, has all the necessary certificates of conformity. The package includes 1 pc. This model can be ordered online in an online store, or bought at a car store in your city. Average cost: 8262 rubles.

• availability;
• wear resistance;
• overheat resistance.

• price.

Indicators	Meaning
Number of holes (pcs)	6
Dimensions (diameter and height) (cm)	42x2
Weight (kg)	14.6
Manufacturer	KAAZ

BELMAG 2108-2115 2110-2112, BM08-3502070

The manufacturer gives a guarantee for its products for 1 year or 40,000 km. Suitable for cars Lada Kalina, Grant, Priora, Datsun. Installed on the rear axle. Average price: 1144 rubles.

• long service life;
• high resistance to overheating;
• ease of installation.

• only for a specific brand of car.

Indicators	Meaning
Catalogue number	2108-3502070
Weight (kg)	11.15
Complete set (pcs)	4
Packing dimensions(mm)	310x290x282

The article examined what types of brake systems are. Which systems are suitable for cars and trucks, where to buy a suitable option, which type for cars is more efficient and profitable.Also presented the main selection criteria, this will greatly simplify the purchase process. The ranking of high-quality brake systems includes the best foreign and domestic manufacturers.

Remember, investing in quality brake drums will give you quick and efficient braking. When choosing the right one, pay attention to the parameters of the car and the nature of your ride.