Rating of the best dry-heat cabinets for manicure for 2022

The market of services in the field of beauty provides not a small selection of services of any specialist. Finding a manicure and pedicure master is not an easy task. Since, if we visit a beautician several times a year, then beautiful and well-groomed nails require more frequent visits to the salon. Now there are quite a few people providing these services. Someone works in the salon, and someone is receiving at home. When choosing a nail master, pay attention not only to his skill, but also to the cleanliness of the office and the processing of tools. The further condition of your hands depends on the correct sterilization and disinfection. And the master, in turn, will need a special dry-heat cabinet for manicure.

Rules for processing tools

To prevent the spread of viral and infectious diseases from the client to the master or other clients, manicure should be carried out only with sterile instruments. To do this, it is necessary to carry out disinfection and sterilization in three stages.

For complete purity, it is necessary to carry out all three stages, and it is impossible to change their sequence and it is recommended to strictly follow all the rules.

The first step is to disinfect the instruments. This step is necessary to eliminate viruses, fungi and infection from the surface of the instruments. To do this, you need to fill the tools with a disinfectant. Typically, such funds are available in the form of concentrated solutions. For their application it is necessary to dilute them with water. Rather, it will be said to add a certain small amount to the water. Each concentrate has its own percentage, and from this you need to calculate the volume of water. Usually, such a solution is prepared in advance. After completion of work with the client, the tools in working form are laid out in the solution. The disinfection time is specified by the manufacturer. Usually it is about 30 minutes.

After disinfection is completed, the second step should be taken, which consists in cleaning the instruments before sterilization. At this stage, all parts should be cleaned of the remains of the skin of customers, traces of blood, and possibly the remains of the disinfectant.If you skip this step, then these biological particles will only stick stronger during heat treatment, which will not only make the instrument non-sterile, but can also ruin its working functions. This stage is a mechanical cleaning, which is usually carried out under running water, at which time it is necessary to process each part with a brush. After that, it is necessary to allow the tools to dry completely and only then proceed to the last stage of processing.

So, the instruments are completely dry, now you can proceed to the final stage - sterilization. It is necessary to remove the spores of certain microbes that are not destroyed in the first stage with the help of a disinfectant. Usually sterilization in manicure rooms is carried out using a dry heat apparatus. Before starting the stage, make sure that all parts are completely dry. After that, the instruments must be placed in special bags for sterilization. The fullness of the packages should be 2/3 of the volume of the package. The bag must be sealed before sterilization begins. The duration of the process depends on the set temperature. At the end of the sterilization time, the instruments must cool down in the cabinet itself, after which they can be removed.

What is a dry oven

A dry heat cabinet, or as it is also called a dry heat or a heat sterilizer, is used in beauty salons and medical institutions to treat instruments to get rid of germs and bacteria. The principle of its operation is based on the processing of products with dry air at a temperature of 180-200 degrees. It gained popularity due to its low cost, unlike autoclaves.

The thermosterilizer consists of a chamber where the process itself is carried out, there is also a heating element inside. Inside the chamber there are gratings where packages with products that need to be sterilized are laid out. Also, this equipment has a special panel where you can adjust the temperature and processing time of products. Thanks to special ventilation, there is a quick heating of the cabinet inside and all the tools in it.

If you process products at a temperature of 160 degrees, then the process should last at least two hours, at a temperature of 180 degrees one hour will be enough, and for the process to take half an hour, then the temperature should be 200 degrees.

Nuances in working with a dry oven

Unlike an autoclave, which operates on the basis of humid air temperature, this sterilizer works with dry air. Therefore, it processes instruments at higher temperatures than an autoclave. Before starting work, one must take into account this feature and be attentive to the material of the sterilized product, so that during processing it does not lose its shape and presentation. But for metal products, this method will undoubtedly be an advantage, since when steamed, the product will be subject to corrosion. Also, unlike autoclaves, the thermosterilizer has a lower cost and consumes less electricity, which reduces costs during operation.

But besides the advantages, there are also small disadvantages. For example, the processing process takes longer, especially if you set the minimum allowable temperature value. Such processing can slow down the workflow.It is also necessary to follow the loading rules, the loaded products must be evenly distributed throughout the sterilizer. This is necessary for uniform air circulation, which will ensure that all bacteria, fungi and viruses have been destroyed.

How to choose a dry oven

Before looking at specific models, take a look at your customer turnover and how many tools you use. Now let's take a closer look at the criteria that you should pay attention to.

First of all, dry-heaters are distinguished by their capacity, i.e. volume. If you work from home, or you have a small office with an average turnover of clients, then a small volume will be enough for you. Beauty salons that have several manicure and pedicure masters need a more voluminous apparatus. This will not slow down the work of the masters, since it will be possible to load a large number of products at once.

Pay attention to the performance of the sterilizer. The rate of heating will depend on this indicator. The faster it heats up, the faster your tools will be processed and ready to go.

Also, many models have additional functions. For example, cooling after processing or communication with a computer to control the frequency of processing. Not all of them are actually necessary, but the cost of such devices will exceed the price of a conventional oven.

Also, pay attention to temperatures. Powerful models have higher temperature gradations. The higher the processing temperature, the shorter the process will take.

The best dry-heat cabinets for manicure

Sanitizing Box CH-360T

This Chinese-made thermosterilizer is designed for processing not only manicure devices, but also medical devices.

The inner case of "CH-360T" is made of stainless steel. Also available is a removable container that can be used both for sterilization and for transferring and storing products. For ease of use, there are two indication lamps. One of them shows the heating of the device to the set temperature, the second refers to the timer. The timer allows you to set the time from 0 minutes to 1 hour. When completed, a beep will sound. This model of dry heat works in the temperature range from 0 to 220 degrees. The required temperature should be selected depending on the material of the processed fixtures.

The volume of "CH-360T" is 1.8 liters, weight - 3.8 kg. The size of the product is 31*14*18 cm. "CH-360T" has a power of 300W.

The average cost is 3000 rubles.

• Small dimensions;
• There is a timer;
• Temperature indication lamp;
• Suitable for home use;
• Affordable cost.

• The timer only lasts 60 minutes;
• Not suitable for use in large beauty salons.

Sanitizing Box SM-360B

"Sanitizing Box SM-360B" is widely used in cosmetology and manicure rooms, as well as in medical institutions. It is suitable for processing metal and glass fixtures. With it, you can disinfect instruments from bacteria, germs and fungi by 99.9.

The inner chamber and convenient tray are made of stainless steel. For added convenience, a removable container and accessories are included with which you can remove the workpieces and the tray from the chamber.

"Sanitizing Box SM-360B" is convenient to use. To control the time there is a special timer that can be set up to 2 hours of operation. This thermal sterilizer operates in a temperature range from 0 to 200 degrees. Also on the control panel has a display that displays the remaining time and temperature of the device.

The internal volume of the Sanitizing Box SM-360B is 2 liters. The dimensions of the device are 31 * 14 * 18 cm, while the size of the chamber is 25 * 12 * 6 cm, and the size of the tray is 24.3 * 11.3 * 2.7 cm. The weight of the product is 4.2 kg. The power is 300 watts.

The average cost is 3800 rubles.

• Compact size;
• Display showing temperature and remaining operating time;
• Timer from 0 to 120 minutes;
• Devices for extracting the tray and tools.

• No.

Sanitizing Box KH-360B

"Sanitizing Box KH-360B" is a sterilizer that is widely used for disinfection of manicure, pedicure and cosmetic equipment. It has a stylish design, thanks to which it will look advantageous both in beauty salons and at home. A distinctive feature of this model is the LCD display, with which it is easy to set the necessary processing parameters.

The outer casing is made of metal and covered with white paint, which is resistant to disinfectants. The inner chamber is made of stainless steel, the container for storage and processing of accessories is also made of stainless steel. "Sanitizing Box KH-360B" is suitable for sterilizing 3 sets of manicure instruments. Also this model is completed with special rings for extraction of a tray.

Possible inventory processing temperature varies from 50 to 220 degrees.There is a timer that can be set up to 1 hour. At the end of the sterilization process, an audible signal will sound.

The volume of the chamber is 1.8 liters. The size of the "Sanitizing Box KH-360B" is 31*14*14 cm, while the size of the chamber is 25*12*6 cm. The power of the device is 300 W.

The average cost is 4000 rubles.

• Electronic scoreboard showing the time until the end of the process;
• Temperature sensor showing the current temperature of the device;
• Convenient management;
• Stylish design;
• Compact size;
• Possibility to simultaneously sterilize up to 3 kraft bags.

• No.

Sanitizing Box WX-12C

This model of a dry-heat cabinet from the Chinese Sanitizing Box brand is intended for professional use. Distinctive features of this thermal sterilizer are high power, large volume of the inner chamber and the ability to maintain temperatures up to 250 degrees. But the manufacturer does not recommend processing manicure or pedicure devices at the maximum temperature, as this may adversely affect the quality of products in the future.

The inner chamber is made of stainless steel, there is also a container for heat treatment or inventory storage. It is worth noting that the outer part of the “Sanitizing Box WX-12C” has a protective coating of white paint, which will not change color in the future, and is also resistant to slight mechanical stress and treatment with disinfectants.

For the convenience of controlling the sterilization time, there is a timer, the maximum possible setting time is 30 minutes. An audible signal will sound when the job is completed.The inner chamber has an infrared lamp, which heats the device. There is also a temperature sensor, which can be controlled using an indication lamp.

The volume of the inner chamber is 7 liters. The size of the "Sanitizing Box WX-12C" is 22.5*21*32.5 cm, while the size of the chamber is 19.5*20*18 cm. The weight of the device is 4 kg. The power is 1000 watts.

The average cost is 4800 rubles.

• High power;
• Chamber volume - 7 liters;
• An infrared lamp controls the heating of the device;
• Suitable for salon use.

• The maximum timer setting is 30 minutes.

Dry oven RuNail

This model of a thermal sterilizer from the RuNail company is suitable for disinfection of manicure and pedicure tools. The inner chamber of the dry heat is made of stainless steel, in addition, a special tray is included for storing and disinfecting devices. For convenience of control of time there is a timer. The maximum time set by the instrument is 120 minutes. Supported temperature range from 0 to 200 degrees. There are indicator lamps with the help of which the control of the set temperature is carried out. Remove the inner protective film before starting work.

The volume of the inner chamber is 1.8 liters. The size of the cabinet is 31*18*16 cm, while the size of the chamber is 25*12*6 cm. The weight of the dry heat cabinet is 4.2 kg.

The average cost is 5200 rubles.

• Timer for 120 minutes;
• Small dimensions;
• There are indicator lights for temperature control.

• Only holds 1 kraft bag.

Conclusion

Wherever you are receiving clients at home or in a beauty salon, first of all, you need to take care of safety. The client, seeing that all the instruments are sterile, will definitely return to you again. Proper processing of fixtures is important not only for customers, but also for the master. Moreover, not every client may suspect that they have any diseases that can be transmitted through blood or skin residues on the instrument.