Rating of the best construction stand mixers in 2022

The construction stationary mixer is a significant and not too cheap device, among others, necessary for repair and construction work. It is important to know how to choose a decent stationary construction mixer with the right parameters and the necessary characteristics at an affordable and acceptable price? To facilitate the choice, the following is a rating of the best products, indicating their advantages and disadvantages.

Main features of the stand mixer

The main feature is that the stationary mixer does not require constant holding it in your hands. At the same time, the labor intensity of work on the preparation of concrete solutions and various building mixtures is significantly reduced.

Benefits of Stand Mixers

Another not unimportant advantage is the fact that mixers of this type can keep a large amount of building material in a non-hardening state for a long time. Constantly stirring the solution, the mixer does not allow it to harden during the time required for its consumption.

This is useful when slow material consumption is required. Especially if at the same time there should be a lot of material and strictly the same consistency. For example, decorative plaster, which is applied over a large area by one specialist using coloring components. Frequent kneading will lead to uneven coloring of the material, which is unacceptable. Using a stationary mixer will free you from this kind of disadvantages.

The presence of a special container eliminates the need to use additional construction utensils, the shape of which is not always convenient for mixing mixtures. The special internal shape of the containers of stand mixers is ideal for mixing the entire volume of material used.

Best Stand Mixers 2022

Although the best choice for a particular unit will be its most complete match to the necessary requests, its functionality, taking into account the user category. Budget mixers, of course, will contain a minimum of necessary functions. It is advisable to purchase a professional apparatus with greater mechanization. Here, such a parameter as durability will be important, which depends on the assembly, and, of course, on the manufacturer.

Reputable manufacturers most often use more advanced production technologies with a significant increase in product quality, while almost not raising the price of the product. Although this is not always the case. It may be the other way around.Therefore, when choosing a specific manufacturer and model, it is better to study, if possible, all the most important aspects. Some of them are intended to highlight this article.

Mixer AGP AM 5000NC

Taiwanese company Lee Yeong Industrial Ltd was founded in 1988. It produces a wide range of products under the AGP brand, emphasizing tool reliability and product quality.

The model of the AM 5000NC construction stand mixer differs from the AM 5000 in the presence of a metal protective grille instead of a plastic protective cover. Other features of these models are insignificant.

This is a single-speed unit with a power consumption of 1 kW, the useful power delivered to the load is about 560 watts. At the same time there is an electronic protection of the engine. The torque is 105 Nm. The maximum number of revolutions is 65 rpm.

The mixing capacity is 50 liters. One removable spindle is installed on the motor shaft through the chuck. The dimensions of the device are: 940 mm × 580 mm × 780 mm. For ease of movement of the device during operation, 2 small wheels are fixed on the frame. To lift the lid with an electric motor and move the device, a special convenient folding T-handle is used.

Weighs 32 kg. Estimated price: from 34,950 rubles to 36,871 rubles.

• justified apparatus for those who are engaged in plastering;
• you can add putty or cement for thickening, or water for thinning directly through the grid without turning off the unit;
• no assistant is needed, you can refuse his services, having this device.

• heavy.

Mixer BATTIPAV 050S

The company, which specialized mainly in the production of roller vibrating plates, was founded in 1970. The use of innovative technologies in the production of tools for laying and processing ceramic tiles brought popularity to the company in the 80s, when it occupied a leading position in Europe. The products are made in Italy, but are available to markets in more than 80 countries around the world. The authenticity of products is easy to verify by the engraved quality mark on all products of this brand.

The scope of the stationary mixer BATTIPAV 050S is included in almost all types of work related to the preparation of building mixtures and mortars. This device can be used for both external and internal work. Also, during cosmetic or major repairs, it can be indispensable, reducing the complexity of the work. The large tank capacity of 65 liters reduces the time needed to prepare new mixes. This also facilitates the use of the mixer in team work. Belongs to the professional class.

The power of the machine is 1200 W, single speed with one spindle. The number of revolutions of which is 60 rpm. Basin and lid are made of high quality plastic. Dimensions: 1,000 mm × 600 mm × 800 mm. The frame, made of metal pipes, is equipped with wheels and a T-handle for easy transportation.

Weighs 24 kg. Product price: 51,419 rubles.

• masters steep kneading under a semi-dry screed;
• large tank capacity, 65 liters, enough for a large amount of work;
• Italian quality;
• well kneads concrete solutions, constant stirring prevents "setting" even with a high concentration of gypsum.

• rarely found on sale;
• the price is high.

Mixer Eibenstock Automix 1801

The Eibenstock company began its existence back in 1919. Not far from the city of Leipzig, Germany, there is an enterprise that has already taken a leading position in the production of modern power tools. The powerful, not only industrial, but also the scientific and technical base of the concern contributes to the production of highly productive equipment.

The construction, stationary mixer of this model is designed for mixing mixtures of high and medium viscosity. It can prepare mortars with cement, plaster, leveling mortars, stir masses for pouring and prepare screed materials. It is also possible to mix the consistency from ready-made mortar with a volume of up to 65 liters.

The power consumption of the installation is 1.5 kW. Idling speed - 115 rpm, under load - about 70 rpm. Equipped with a mechanical safety stop, which is characterized by increased reliability of operation. A distinctive feature of the unit is the presence of a metal casing around the front of the tank. It protects the plastic basin from possible damage during the operation of the unit in various conditions.

The lever is hinged for easy container replacement. The equipment can be moved using the T-handle. For this purpose, an axle with high-strength plastic wheels is installed on the frame. Spindle connection with blade for thread size M20.

Weighs 26.5 kg. Price: 55,000 rubles.

• German build quality.

• high price.

Universal mixer with gearbox from the company STROYMIX

The Russian company STROYMIKS is engaged in various activities in the field of construction. One of them is the production of tools and materials. They developed and produced a device based on a motor with a gearbox. The pulley from the gearbox is made of stainless steel, which allows the device to be used even in food production.

The versatility of the design lies in the fact that it can be installed on a container with a volume of 1 to 90 liters. To do this, the motor with a gearbox is equipped with 4 bolts for attaching to various kinds of devices. But it is usually produced mounted on ready-made containers made of aluminum, stainless steel, tin or plastic. Most often with a volume of 40 liters, 65 liters, 90 liters.

A wide range of applications includes the mixing of adhesives, paint mixtures, epoxy adhesives. As well as all kinds of plasters and putty solutions. It can even be used for mixing feed mixtures, making compound feed.

The unit is made on the basis of a single-phase motor powered by a 220 V AC network. However, there are options for a three-phase electric motor with a supply voltage of 380 V. The motor power can also be different, but the device with a 500 W, 650 W motor has the best data.

The engine speed is 1,500 rpm, after the gearbox, the pulley rotates at a speed of 50 - 55 rpm. The design can be supplemented with an electronic speed controller. The use of lower speeds eliminates the capture of air in the prepared mixture. As a result, it is more homogeneous.

Some structures of this type from the company STROYMIKS with a metal tank are equipped with a special electric heater at the bottom of the tank for heating.As well as special sensors to turn off the electric motor when opening the lid with the installation. This convenience allows you to safely take the mixture during mixing. The frame with a foldable metal tube handle is complemented by wheels for easy movement of the unit.

There are two popular modifications:

• STROYMIKS-65A

The device is equipped with a motor - 220 V, 50 Hz, 1400 rpm, with a gearbox 50/55 rpm. Productivity makes 500 kg/hour.

• STROYMIKS-65V

The device has an engine power of 1.1 kW and a stirrer speed control from 0 to 600 rpm. The maximum whisk diameter is 142 mm. Productivity is increased up to 600 kg/h.

The weight of the unit depends on the design of the frame and the container used. There are designs with a tank with a capacity of 40 l, 65 l, 90 l, which weigh 10 kg, 12 kg and 16 kg, respectively. Installation price from 30,000 to 35,000 rubles.

• very wide range of applications;
• there is a possibility of re-equipment for various capacities;
• comparatively cheap.

• in some designs, care must be taken to avoid capsizing the container during operation of the installation. It is necessary to put in a more stable position.

Mixer Iperbet Fluid

The LITOKOL company was founded in 1968 in Italy. She specialized in graduating tile adhesive. Now the company is engaged in the production of building chemicals and tools for all work related to ceramic tiles. In this area, it occupies a leading position.

A distinctive feature of the design of the Iperbet Fluid mixer is that the container rotates in it, and the blade is fixed motionless.It is designed for mixing self-levelling mortars, tile adhesives, current mortars. Designed for the preparation of mixtures of low viscosity.

But it can also be used for the preparation of plaster and cement mixtures. In this case, a smaller volume is kneaded to prevent the bucket from slipping in the moving platform. When stirring a thicker mixture, it can be taken directly from the bucket with a trowel. The rest of the material can continue to rotate with the bucket, preventing it from hardening. Productivity of installation is 300 kg/hour.

The folding mechanism allows you to remove the blade from the bucket. In this position, you can remove the bucket from the platform. It is driven by an electric motor installed at the bottom of the unit. This part is covered with a metal casing. This design more reliably protects the electric motor from the ingress of liquids or precipitation. Also, moving internal parts are reliably protected from foreign objects getting into them.

The design is equipped with an economical motor with a supply voltage of 220 V, 50 Hz, and a power of 370 W. Two-speed system: 55 and 66 rpm. The capacity of the bucket is 45 liters. The package includes an additional container, blade. Also a hex wrench for nuts for attaching the blade and setting it in the desired position. Construction dimensions: 600 mm × 510 mm × 770 mm.

Weighs 34 kg. Price: 60 970 rubles.

• very convenient for kneading, for example, tile adhesive;
• good user experience with compact design.

• it costs expensive.

Mixer MIX-60 IMER

The generally recognized leader in the production of various construction tools, the company, IMER, Italy.The company started its activity in 1962 and now has branches in many countries of the world. In the development and production of its products, the company focuses on minimizing harm to the environment. The devices are produced with a high class of environmental friendliness. The product quality complies with all international rules and standards.

Designed for mixing various mixtures, adhesive solutions, plasters and putties. And also to prepare for the use of various ready-made adhesive compositions. Single speed with one spindle.

Electric motor power - 550 W, on which electronic protection is installed. The number of revolutions after the gearbox is 55 rpm. The noise level during operation is about 65 dB. The capacity of the plastic basin is 56 liters.

Weighs 30 kg. Price: 50,527 rubles.

• simple and compact design;
• easy to transport, quiet operation.

• the nuts on the blades are tightly clamped or unscrewed by themselves;
• can not be used to mix the mixture with expanded clay or small gravel, so as not to damage the basin.

Mixer COLLOMIX AOX 600

The unique combination of high performance and product quality is represented by COLLOMIX, headquartered in Germany. An interesting model of a mixer for mixing various compositions is made by the manufacturers of this company. It uses 2 drives: one goes to the nozzle, the second to the container, which rotate in the opposite direction to each other.

Due to the possibility of changing the working elements of the mixer, the device has a wide range of applications. It can qualitatively stir the mixture, while breaking up lumps, if any.And a separate drive to the container will keep the composition in a non-hardening form for a long time. The presence of a special scraper prevents the mixture from sticking to the walls of the tank.

The tank capacity of this construction mixer is 65 liters, of which about 40 liters are used to fill the mixture, which is about 60 kg. Such volumes allow mixing the mixture for a team of specialists.

The unit is powered by a single-phase voltage of 220 V, 50 Hz with a load current of at least 10 A. The motor power for the spindle drive, which rotates at a speed of 750 rpm, is 1 kW. Drive power to the tank - 550 W, speed - 18 rpm.

Weighs 51 kg. Price: 202 386 rubles.

• highly productive, multifunctional plant with great possibilities and volume.

• due to the high price, it is used only for professional and team work.

The considered construction stationary mixers have a number of advantages in comparison with hand-held appliances of this type. Their application in practice reduces the complexity of the process of preparing a building mixture. There is also no need for assistants.

The market for such products is represented mainly by Italian and German manufacturers. The products of this category, manufactured by manufacturers of domestic companies, also have good characteristics.