Rating of the best products for mold on the walls for 2022

Such an unsightly phenomenon as mold, with its presence, not only worsens the appearance of the room, violating all the laws of hygiene and aesthetics, but also provokes health problems. Green, gray and black mold is a fungus that breeds on walls and gradually spreads to other surfaces - furniture, interior items, carpets, clothes. As a result of the appearance of dark spots of the fungus, the surfaces deteriorate, it is often necessary to remove part of the wall. In addition, the occurrence of fungal deposits is accompanied by an unpleasant smell of dampness. Special anti-mold products will help to cope with the problem.

Why is mold dangerous?

Spores, entering the human body and settling there, can cause a respiratory tract infection. Constant and regular inhalation of spores can provoke a number of diseases, including:

• weakening of the immune system;
• tachycardia;
• allergy;
• bronchitis;
• conjunctivitis;
• stomatitis;
• dermatitis;
• thrush;
• bronchial asthma.

To prevent the development of diseases, you must immediately declare war on the invader, preventing the fungus from causing serious harm.

Causes of mold

First you need to understand the reasons for the appearance of such an unpleasant and dangerous neighbor as mold. The fungus occurs in conditions of heat and constant dampness, as well as in old buildings where the insulation of interpanel joints is broken and the walls get wet during rain and damp weather.

Plastic windows can contribute to the appearance of moisture on the wall surface. Another reason for the spread of mold can be poor insulation of the premises. Violations of the drying of walls during repairs can also provoke the occurrence of fungus. Living in such rooms is harmful, so you need to start eliminating the fungus as early as possible - the older it is, the more difficult it is to deal with it.

How to deal with fungus?

To destroy mold, you need to clean the room from moisture and dampness, treat it with special antiseptic agents, which include aggressive chemicals that effectively remove mold.Such funds can be purchased at any store. They are available in the form of liquids, sprays, concentrates. When working with such powerful tools, you must follow safety measures: be in work clothes, rubber gloves, a scarf, goggles. The chemical is applied to the walls, and then removed along with the fungus. The best way to remove mold and prevent it from reappearing is to scrub it down to the base of the wall and apply an antiseptic primer.

Home remedies can be an alternative method of fighting mold. It is desirable to combine both those and other substances with the mechanical method of removing the fungus. It will also not be superfluous to install a forced exhaust ventilation device, to eliminate voids in the walls.

Top home remedies for mold

Before declaring a full-scale chemical war on fungus and mold, you can seek help from home and folk remedies that can cope well with infection. They are available, they can be purchased at a pharmacy or hardware store, in addition, such solutions have an affordable price.

• Vinegar

Almost invariably present in any home. Despite its culinary purpose, vinegar can eat away fungal plaque, and the effect will last up to several years. For processing, you need to spray vinegar on the infected areas, after an hour carefully wipe these places with a wet rag or sponge, and then allow the surface to dry. As a result, the mold will disappear for a long time, and with it the unpleasant smell of dampness.

• Bleach

This affordable, inexpensive tool is suitable for the bathroom, as well as for treating wood surfaces.Since bleach has a pungent odor, cleaning should be carried out with a respirator, protective gloves, and children and animals should be isolated. Before starting work, bleach should be diluted with water in a ratio of 1: 1 and spray the resulting solution with a spray gun. After the procedure, bleach does not need to be washed off the walls. It is worth noting that chlorine produces a double effect - it destroys harmful microorganisms and has a whitening effect. The effect of the application is noticeable immediately.

• Ammonia

With the help of ammonia (ammonia solution) small stains of mold can be eliminated. To do this, dilute it with water in a ratio of 1: 1 and spray on the areas affected by the fungus. After some time, the solution is washed off with water. Ammonia has a strong smell that can cause dizziness, so you need to wear a respirator to work with it, as well as gloves to protect your skin. Processing should be done carefully. In no case should ammonia be mixed with chlorine - the resulting chemical turns into a toxic solution that can cause serious harm to health.

• blue vitriol

This inexpensive substance is well known to gardeners. Before using it, you must first clean the infected area with soap and water, dry it, and only then spray an aqueous solution of copper sulfate. If necessary, this procedure can be repeated up to 3 times.

• Bura

Natural antiseptic of mineral origin, effectively etching mold and other types of fungus. The solution is prepared in the proportions of 1 cup of borax per 2.5 liters of water. With this mixture, you need to clean the area affected by the fungus, allow it to dry completely, and then remove the formed crystals with a cloth.

• Soda

The simplest and most harmless remedy, with natural antiseptic properties. To disinfect small areas of mold, prepare a solution in the ratio of 1 teaspoon of soda to 1 glass of water. The resulting mixture is applied with a sponge or sprayed from a spray bottle. Rinse off the soda solution is not required.

The most inexpensive means for removing and preventing mold

"Abedis 06"

A Polish product with a high level of safety - "Abedis 06" is universal, it is allowed to be used in children's rooms. The main component of the product is guanidine, a strong antiseptic substance. The preparation is suitable for internal and external processing of the building, as well as small buildings, such as a gazebo or a greenhouse. Also, using this emulsion, you can disinfect garden paths. "Abedis 06" can be used for prevention (the drug can be added to paints and mortars) and to remove fungal plaque.

Before work, the emulsion should be diluted with water in a ratio of 1: 2, then, with the resulting solution, treat the infected surfaces. The mixture is left for a day until completely dry, after which it is removed with water. When the treated surface is completely dry, it is recommended to repeat the procedure, but not earlier than after 3 days. Despite the harmless composition, protective equipment must be used during work.

The average cost is - 177 rubles.

• suitable for children's rooms;
• the composition does not contain harmful components;
• budget drug;
• excellent result.

• not found.

"Neomid Bio Repair"

Environmentally friendly disinfectant of Russian production.Thanks to its formula containing substances harmless to humans, as well as a reasonable price-quality ratio, it has gained particular popularity. Available in the form of a ready-made solution for the treatment of small rooms, apartments, or a concentrate for cleaning large areas of infection. In addition, "Neomid Bio Repair" is used at the construction stage, as a preventive measure to prevent the occurrence of mold.

The drug is sprayed onto the infected area, after which it is left for two hours. After that, remove with a scraper. The procedure can be repeated if necessary. If the processing takes place in the open air, it is not recommended to get moisture on the cleaned surface - the humidity should not be higher than 60%, and the temperature should be from 15 to 20 degrees Celsius. If processing is carried out indoors, good ventilation should be ensured. The duration of the effect, according to the manufacturer, reaches 20 years.

The average cost is - 289 rubles.

• convenient release forms
• price-quality ratio;
• ease of use;
• safe components in the composition;
• does not affect the original color of the materials;
• lasting effect.

• strong chemical smell.

"Biotol-spray"

A powerful Russian antibacterial agent for the treatment of surfaces made of natural stone, wood, concrete and other common materials. The drug does not contain heavy metals, mercury and chlorine. Has a slight chemical odor. "Biotol-spray" demonstrates a wide range of applications - the treatment of basements, facades of buildings, attics, roofs, balconies, as well as the disinfection of architectural monuments, memorial fences, slabs and restoration work.

If the infection is severe, the surface must first be mechanically cleaned of mold with a scraper or brush, carefully removing the layer of contamination, trying not to spread the fungus to neighboring clean areas.

It is recommended to spray the spray on the treated area from a distance of 30 cm, then leave the solution for a day or two, after which you can remove the drug along with the fungus and clean the surface with a brush. The solution can be reapplied if the infection is old or neglected.

The average price is - 300 rubles.

• strong drug;
• suitable for most materials;
• without harmful impurities;
• faint smell.

• not detected.

"Belinka"

A drug of wide application, produced in Slovenia. "Belinka" does not contain a bleaching agent in its composition, and does not affect the color of the treated surface, due to which it is used for the treatment of colored surfaces. The substance quickly and successfully eliminates numerous types of fungus, both in dry rooms and in places of high humidity. Suitable for treating surfaces made of concrete and gypsum and is used for disinfecting ceilings, walls, floors, attics and plinths.

To get started, you need to prepare a solution in a ratio of 1: 4, which is applied to the affected surface with a brush or sprayer. It is recommended to work at a temperature above 5 degrees Celsius, and a humidity level not exceeding 80%. After the solution has completely dried, dirt can be removed, it is advisable to do this with hot water and under pressure. Large areas affected by the fungus are best cleaned again. After drying, you need to apply a primer, and then a topcoat.

The average cost is - 350 rubles.

• does not distort the color of the material;
• for dry and damp rooms;
• a wide range of applications;
• affordable price.

• not found.

Means from a mold of an average price segment

"Pufas AMSS"

A highly effective drug from a German manufacturer that can clean the infected area almost instantly. Possessing a powerful effect, the drug does not contain chlorine in its composition. A wide range of applications includes areas such as kitchens, bathrooms or showers, toilets, balconies, building basements, façades, attics and roofs. "Pufas AMSS" does not spoil the material on which it is applied, so it can be used to disinfect decorative elements. Also, the tool can be used as a prophylaxis in the process of construction or finishing work.

It comes in a convenient package with a built-in spray bottle. Before work, you need to ensure your safety by wearing safety glasses, gloves. The drug is recommended to be sprayed onto the area to be treated from a distance of 20 cm. It is necessary to completely soak the surface with the solution, and then leave it to dry completely (3 days). If after this period there are traces of mold on the site, the procedure should be repeated without washing off the solution. The remains of the drug are washed off with water.

The average price is - 473 rubles.

• fast action;
• convenient packaging;
• long-term and reliable protection.

• high price.

"Olympus Stop Mold"

A product from a Russian manufacturer that creates long-term and reliable protection against fungal deposits. It has a wide range of applications, can be used in wet areas: bathrooms, showers, saunas, swimming pools, as well as basements, basements and attics, facades and roofs of buildings.With the help of "Olymp Stop Mold" you can eliminate the fungus from concrete surfaces, tiled, natural stone, brick, wood and plaster. At the same time, the drug is harmless to humans and pets, since the composition does not contain chlorine or harmful volatile substances. Also, it does not change the color and texture of the treated surfaces.

Before starting disinfection, you must first remove the layer of fungal plaque, check whether old paint, plaster and other materials are peeling off - the surface should be as smooth as possible and not contain large particles of debris. The solution is available in finished form, it does not need to be further diluted with water. "Olympus stop mold" is applied with a brush, a construction roller or a sprayer (at a distance of 20 cm). For best results, it is recommended to apply two coats of the product. The tool dries completely within a day.

The average price is - 479 rubles.

• attractive price;
• safety;
• high efficiency;
• convenient packaging;
• no smell.

• not detected.

"Dali"

Russian universal preparation suitable for use on surfaces made of wood, concrete, brick and drywall. Able to penetrate deep inside, even under a layer of plaster, which eliminates the need to remove it before starting work. The drug does not contain chlorine, so it is harmless to people prone to allergic reactions. "Dali" is quickly absorbed and does not spoil the appearance of materials.

The solution can be applied with a roller, wide brush or sprayer. You should also observe safety precautions, use a respirator, protective gloves. The temperature during processing should be at least 5 degrees Celsius."Dali" demonstrates high penetrating ability, its complete drying occurs within a day. If the surface is heavily contaminated, it must first be cleaned mechanically, rinsed thoroughly with water and dried completely. Remove the remaining dirt with a brush after two days after drying.

The average price is - 580 rubles.

• penetrates deeply into the material;
• fast absorption;
• does not spoil the color and texture of materials.

• has a strong chemical odor.

"Sazi Wepost Luxe"

A Russian-made antifungal agent that can be used outside and inside the premises. The manufacturer recommends using the drug in combination with a water repellent to provide protection against the harmful effects of dust and moisture - after its application, a thin imperceptible layer remains on the surface, preventing the penetration of dampness. Due to this, the material treated with the solution increases the level of waterproofing.

Disinfection is carried out in two stages. At the first, the antiseptic included in the composition is engaged in the destruction of mold. The product must be left to dry, then reapplied according to the instructions, and then remove the residue with a scraper. At the second stage, it is recommended to apply a water repellent for reliable protection against the negative influence of the external environment. "Sazi Wepost Luxe" has a long-lasting effect.

The average price is - 750 rubles.

• does not spoil the appearance of materials;
• increases moisture protection;
• prevents the reappearance of the fungus.

• not found.

Premium Mold Remedies

Savo

An effective Czech remedy for preventing the formation of fungus and eliminating mold. The main active ingredient - sodium hypochlorite - is able to successfully cope with any type of mold. The drug can be applied immediately, without prior chemical or mechanical treatment of the infected area. Available in the form of a spray, which allows the solution to penetrate deep into the pits and crevices, thereby providing the best result. "Savo" can be used in areas such as bathrooms, showers, saunas, swimming pools, plinths and attics.

Before starting work, wear protective gloves and a respirator. "Savo" should be sprayed onto the surface from a distance of 10 cm, focusing on bumps and crevices. Then, the applied composition should be left for 20-30 minutes, then rinse with water. After complete drying, the surface can be re-treated if traces of contamination remain. Two procedures are usually enough to completely get rid of mold. If the area of ​​infection captures large areas, and the treatment is carried out in a closed, residential area, it is recommended to leave it for 1-2 days, since the drug has a pungent chemical odor. With a small infestation and a small treatment area, it is enough to ensure good ventilation of the room, or open windows for ventilation.

The average cost is - 1,020 rubles.

• convenient release form;
• can be used for preventive work;
• effective and long lasting results.

• strong smell;
• high price.

"Fongifluid Alpa"

Russian antifungal agent for the destruction of all types of mold, moss and lichen from a wooden surface.It is used for the prevention and treatment of rooms with a high level of humidity: bathrooms, steam rooms, saunas, showers, basements, greenhouses, as well as buildings exposed to moisture - fences, fences, street structures made of wood. Suitable for processing various materials: plaster, concrete, brick, drywall, natural stone, ceramics, tiles. The drug penetrates deeply into the treated area, while it does not form a film and does not distort the color of the surface. The composition of the product does not contain harmful chemical components or toxins, it is safe and environmentally friendly.

"Fongifluid Alpa" is completely ready for work and does not need to be diluted. If the infection is old or severe, it is recommended to apply the solution twice. After application, it must be left to dry completely (from 4 to 6 days).

The average cost is - 1,650 rubles.

• gently cleans the surface;
• does not leave streaks;
• produced in finished form.

• high price.

Terrasterill

Highly effective Russian biocidal agent for external and internal treatment of premises. Successfully copes with various types of mold, fungus, moss, lichen and algae. The composition of the drug includes active fungicides that have a disinfecting effect and prevent the re-formation of fungal plaque. At the same time, "Terrasterill" does not contain harmful chemical compounds, solvents - it is an ecological water-based solution. It has good penetrating ability, and is also able to strengthen and level the surface, increasing moisture-proof properties.The antiseptic not only does not spoil the appearance of the material, but also evens out its color, in addition, the solution can be tinted in a shade similar to that of the coating being processed. Another significant advantage of Terrasterill is its drying time of only 18 hours. The solution is applicable for the disinfection of concrete, plaster, brick, minerals and painted surfaces.

It is better to apply it with a brush or sponge, carefully rubbing the liquid into the infected areas. After the surface is impregnated, it must be cleaned with a brush, then rinsed with water. If the damage is deep, you can apply the solution in two or three layers.

The average cost is - 1,858 rubles.

• for external and internal processing;
• long-term result;
• environmentally friendly;
• favorably affects the material.

• high price.

You should not wait until unsightly mold begins to actively conquer the spaces of the room - the older it is, the more difficult it is to remove it. The use of the home and factory chemicals described above will allow for a long time, and in cases with powerful preparations and forever, to get rid of mold and fungus, these unwanted and unhealthy guests.