Ranking of the best bathroom mold removers for 2022

High humidity, violation of air circulation in the bathroom can lead to the appearance of black mold - the most dangerous type of fungus. It is impossible to put up with this problem, it is advisable to start a fight against an unwanted “neighbor” in a timely manner, because not only the aesthetic appearance of the room will gradually suffer, but also the health of the inhabitants of the house.

Consider the rating of quality bathroom mold removers for 2022, note what to look for when buying, how to avoid mistakes when choosing.

How to deal with mold

Omnivorous ubiquitous mold is a special type of fungal formation that spreads a huge number of harmful spores. At first glance, there is no threat in this phenomenon. But is it really so?

Why is mold dangerous?

From an aesthetic point of view, the external decoration of the room is harmed: gray, greenish-brown deposits, a scattering of black dots on the walls and ceiling of the bathroom are a rather unpleasant sight. A specific unpleasant smell appears in the room, which does not disappear when aired.

But the main danger lies elsewhere. Mold spores contain more than a hundred allergenic and toxic compounds that, when inhaled, pose a real threat to human health and life. Once in the body, they destroy the immune system, cause pulmonary, allergic, skin diseases, and oncology. In some cases, the defeat of fungal spores causes the death of a person.

Causes of mold

There are several main reasons for the appearance of a colony of harmful mold:

1. Insufficient air circulation. A bathroom is rarely planned with a window or vent for ventilation. Therefore, stale, stale air is not uncommon here. You should check the operation of ventilation, hoods. In such rooms, it is not recommended to install thresholds so that there is a gap between the door and the floor for the passage of air masses.
2. Excess moisture levels. Taking hot baths, leaking plumbing, constant washing, frequent use of the room for its intended purpose leads to condensation on mirrors, walls, floors, and other surfaces. From here, one step to the emergence of a colony of fungi.
3. Relative warmth.Comfortable conditions for living and rapid reproduction of mold fungi are provided by an air temperature of +20 degrees.
4. Insufficient heating. With poor heating, walls, floors, ceilings can freeze, which favors the development of mold.
5. Construction flaws. More often this is the use of low-quality floors for waterproofing. Moisture impregnates the material of the walls, which contributes to the settlement of spores. On the first and last floors of multi-storey buildings, this is caused by improper waterproofing of floors in the presence of damp, unheated basements and leaking roofs.

Mold removal steps

The first signs of the appearance of an unwanted neighborhood:

• musty smell;
• peeling paint, wallpaper;
• black, gray blotches on surfaces;
• deterioration in the well-being of people living in the apartment.

Cosmetic stain removal in moldy areas will not work. In order for the fight against a malicious scourge to be effective, and it was not necessary to constantly remove the placers of the fungus that appear, at the first stage it is advisable to destroy the source - high humidity, for which normal air circulation is established.

The second stage is mechanical removal: clean the affected area, protruding slightly beyond the boundaries of the lesion. Scrape off the paint, scrape the seams between the tiles with a special tool, remove the wallpaper. The main thing is that there are no traces of plaque left. Sometimes you have to remove all the finishing material to the base of the wall.

Next, it is appropriate to apply an antiseptic substance with an antifungal effect to the treated area. The principle of using drugs has features, it is important to study the instructions in advance. After the time specified by the manufacturer, treat the surface with a stiff brush.

After that, dry the room with a heater, fan. Re-apply paint, wipe the tile joints, glue the wallpaper. It is better to use primers, putties, glue with antibacterial properties. All brushes, rags, washcloths, gloves with which cleaning was carried out must be thrown away.

Folk methods for removing mold

You can fight mold in the bathroom with tried and tested folk remedies:

• hydrogen peroxide - apply undiluted, be sure to remove after 10 minutes so that the surface does not discolor;
• baking soda - a concentrated solution of 2 tbsp. rub areas with a fungus on a glass of water, you can not wash it off - soda is completely safe;
• a mixture prepared with your own hands from 2 tbsp. boric acid, 3 tbsp. vinegar 9%, 3 tbsp. hydrogen peroxide, 100 ml of water - treat surfaces in a heated form without washing off, the result will become noticeable after 20 minutes, and the required components are always available in the household
• copper sulfate - take 100 g of the substance per 10 liters of water, apply with a thick layer with a brush, rinse, dry, ventilate after 4-6 hours;
• vinegar 9% - not only applied to the affected area, but sprayed in the room so that spores flying in the air do not hit the walls again; if the smell of acetic acid is unpleasant, add a few drops of any essential oil to the solution;
• tea tree oil - a strong organic antiseptic, 1 tbsp. mix well in a glass of warm water, spray on the desired place, rinse after half an hour with a clean sponge dipped in warm water;
• any chlorine-containing bleach - in proportions 1: 1 with water, eliminates mold, subject to personal safety measures with indispensable rinsing;
• ammonia - works on hard non-porous surfaces: dilute with water one to one, treat with a sponge or spray, do not rinse.

At home, you can prepare any of these solutions, but people's experience is not always able to completely get rid of mold.

Prevention recommendations

You don’t have to spend money on the constant purchase of special tools if you follow simple tips:

1. Ventilate the room regularly.
2. Maintain cleanliness by wiping dry all washed surfaces.
3. Spray once a week a solution of 9% vinegar, treat walls, joints between tiles, plumbing.
4. Once a month, treat with any oxygen bleach to kill new spores.
5. Leave ajar the door to the bathroom filled with steam.
6. Always wipe up splashed water.
7. Control humidity levels with a dehumidifier split system, dehumidifiers.
8. During repairs, use building and finishing materials with antifungal properties.
9. Give preference to wooden doors and windows. Unlike plastic, they do not interfere with air circulation.
10. Remember how to make a bathroom solution from improvised means at home.

How to choose a reliable mold remedy

The chemical industry provides a wide range of professional products for do-it-yourself fungus and mold removal in the bathroom. When deciding which tool to buy in order for the treatment to be effective, it is advisable to know the selection criteria:

1. action;
2. processed surface;
3. release form;
4. volume.

Action. Consider what are the household chemicals that are detrimental to black mold:

• direct action - for the active destruction of microscopic harmful spores (directly antiseptics);
• preventive - to prevent the appearance and spread (paints, putties, primers with antiseptic characteristics).

Processed surface. The packaging of the drug always indicates the type of surface for which it is intended:

• for tiles;
• for plumbing;
• for cleaning joints between tiles;
• for brick, concrete.

Household chemicals for home indoor use are made on the basis of organic (vegetable) or combined compounds. Aggressive inorganic ingredients are not used in products intended for interior work of any complexity.

Release form. For ease of use, drugs are available in various forms:

• powder;
• liquid;
• foam;
• suspension;
• spray;
• checker-ionizer.

In each case, a separate instruction is given with a detailed description of the stages of using the drug. Each buyer chooses the most convenient form for himself.

Volume. Mold removers are intended for domestic and industrial use. Therefore, they come in small containers of 0.5 - 1 l or bulk canisters of 2.5.10 or more liters. To treat the bathroom, it is preferable to buy the volume that corresponds to the area of ​​the affected areas in the room.

Rating of the best bathroom mold removers

The ranking of quality mold removers presents popular models from the best manufacturers for 2022 that provide flawless results, are safe, easy to use, affordable, with a description of the advantages and disadvantages.

Lion Ionizer Checker Look

A modern cleaner with an innovative formula from a Japanese manufacturer is recommended for use even in marble bathrooms. The active action is based on the contained silver ions. It is enough to install a disposable checker on a container with water in the center of the room, after the start of activation, leave for an hour and a half, tightly closing the door. The smoke from the ionizer will evenly penetrate into all the cracks and corners, killing mold spores. Good ventilation is required after use. Available in two versions:

1. without smell;
2. with a mint scent.

Volume: 5 g (pack of 30 pieces)

Average price: 689 rubles

• excellent result;
• affordable price;
• ease of use;
• does not require rinsing;
• without smell;
• for any surfaces;
• air quartzing;
• kills any mold.

• difficult to buy.

Dali Universal antiseptic

The certified preparation of the Russian company "Rogneda" is used on any surfaces in the bathroom:

• concrete;
• brick;
• plumbing;
• tile and ceramic tiles;
• painted surfaces;
• wallpaper;
• jambs of doors, windows.

Customer reviews indicate that the antiseptic removes all types of mold fungi. Despite the aggressive characteristics and a specific smell, which makes it necessary to carry out the treatment with rubber gloves, goggles and a respirator, the antiseptic gives an excellent result.

Volume: 0.6 l

Average price: 150 rubles

• inexpensive;
• effective;
• acts quickly;
• economical consumption;
• for any surfaces;
• kills any mold.

• acrid smell.

Alpa Fongifluid

The antiseptic, created by a domestic manufacturer specifically on the basis of antifungal components, is completely ready for use.Consumption during internal work is 1 liter per 5 sq.m. To increase the degree of penetration of the drug deep into porous, rough surfaces, they should be sanded and leveled in advance. Does not damage the color and gloss of painted, tiled areas. For best results, re-treatment is recommended. After spraying with an antiseptic, mold fungi completely disappear, subject to the humidity regime, they do not appear in the future.

Minimum volume: 2 l

Average price: 550 rubles

• convenient dispenser gun;
• good result;
• the mold disappears forever;
• does not harm glossy surfaces;
• ready to use;
• deep impact;
• economical consumption;
• quality match price.

• not identified.

Eskaro Biotol

A universal spray from a Russian manufacturer is suitable for treating any surface. The popularity of the model is due to the absence of heavy metals, chlorine, and mercury in its composition. Unscented product. Before treating severely affected areas, it is recommended to pre-clean them with a scraper. Spray the preparation from a distance of 30 cm or apply with a sponge, leave for a day, rinse. If necessary, repeat the procedure. One package is enough for 4 sq.m.

Volume: 0.5 l

Average price: 300 rubles

• inexpensive;
• effective;
• safe;
• no smell;
• for any surface.

• almost always requires reprocessing.

stop mold

The protective composition of the budget preparation of the Russian trademark Olympus is intended for the destruction and long-term protection against all types of mold fungi. Sold in containers from 0.5 to 5 liters. in the form of a liquid solution, a thick suspension.The 0.5 liter bottles have built-in dispensers for easy, precise application. The tool is completely safe: it has no color, odor, does not contain chlorine, volatile toxic compounds, does not harm the processed materials. Economical: consumption is 1 liter per 5 sq.m.

Volume: 1 l.

The average price is 103 rubles.

• low price;
• efficiency;
• safety;
• quick result;
• different forms and volume of release;
• does not affect the processed materials.

• not identified.

Domestos Spray

Universal spray of the famous Dutch brand, manufactured in Russia. Perfect for removing mold from plumbing fixtures, washing machines, accessories. It is conveniently and quickly sprayed with a gun on all hard-to-reach places with a thin layer, after a few minutes it is wiped off with a damp cloth.

Volume: 0.5 l.

Average price: 230 rubles.

• convenient release form;
• ease of use;
• fast action; economical consumption;
• completely destroys fungal spores.

• the smell of bleach;
• does not penetrate deep into the materials.

Pufas Comet

A chlorine-containing product of a well-known German brand, produced in Germany, does an excellent job with mold in the bathroom. The vast majority of those who have used the drug confidently recommend it as one of the best. Works on any materials, showing an impeccable result in the destruction of harmful spores and stains. To obtain the effect, use the built-in spray gun to spray on the desired place, soak, rinse thoroughly after half an hour, since it contains toxic substances.

Volume: 0.5 l.

Average price: 560 rubles.

• high performance;
• good feedback;
• instruction in Russian;
• convenient to use;
• gives quick results;
• penetrates deep into materials.

• high price;
• toxicity.

Neomid Bio Repair

A popular eco-friendly detergent from a Russian manufacturer, according to buyers, is absolutely safe. It does not need to be removed after the disinfection and destruction of fungal spores. Produced in the form of a ready-made solution and concentrate. The first is ideal for use in everyday life, the second - on an industrial scale, over large areas, severe lesions. Works great on mineral materials:

• ceramics;
• plaster;
• concrete;
• stone.

For long-term storage, it is not recommended to freeze more than five times in order to prevent the weakening of the action of the active components. The area is irrigated with the preparation, after two hours it is removed with a scraper, a stiff brush, and applied again. It is not necessary to rinse off, the liquid does not emit harmful substances, does not pose a danger to humans and animals. The specific smell disappears after use. Does not change the color of processed materials. Prevents the appearance of mold fungi for up to 12 years.

Volume: 1 l.

Average price: 350 rubles.

• excellent result;
• long-term effect;
• environmentally safe;
• prevents further growth of mold;
• economically spent;
• does not require rinsing.

• bad smell.

The appearance of mold in the bathroom is much easier to prevent than to remove. If the malicious guest managed to move in, it is important to start a fight with him in a timely manner, using folk experience or household chemicals for the home. Which company is better, everyone decides for himself.The proposed rating shows how much the best products cost, what advantages they have, what to look for when buying, how to treat surfaces to completely defeat mold.