Clogged pipes create a lot of inconvenience, sometimes you have to invite a plumber to deal with this unpleasant phenomenon. Not everyone knows that you can remove the cause without anyone's help. This is done very quickly with chemical reagents, which are produced in different forms. They include chlorine, alkali, soda, surfactants. The reagent interacts with particles that impede patency in the pipe and turns them into a liquid substance. In addition to cleaning, the cavity of the pipes is disinfected and the fetid odor is eliminated.
When working, you need to take protective measures, since even the most gentle and environmentally friendly products can harm the human body. Substances should not come into contact with the skin or mucous membranes, so work should be carried out with gloves and try to avoid splashing liquid.
Content
The appearance of an unpleasant odor, a decrease in the rate of drainage of the liquid or a rise in the water level requires urgent cleaning measures, otherwise the pipe may become completely clogged and fail altogether.
Cleaning sewer pipes with chemicals can be done without difficulty, but only with the use of protective equipment. Before starting work, you need to wear a mask, gloves, goggles. The room in which the work is carried out must be well ventilated. Modern substances contain acid or alkali. It is not allowed to use products with different chemical composition at the same time, since individual components can react with each other and thereby harm the system. You need to work in the following sequence:
A list of the best, according to experts, remedies for eliminating blockages in pipes is proposed. When compiling the rating, customer reviews were taken into account. Based on the recommendations, you can make the best choice.
Store shelves are full of a variety of household chemicals, this fact puts consumers before a choice. The question has always been relevant, which means for cleaning the sewer is the most effective and safe.
Chemicals that eliminate blockages are divided into three types: gel-like, granular (or in powder form), liquid. The first two types are more effective, with granules and powders acting more actively, but chemistry in the form of gels is less harmful to the health and condition of the pipes. The basis of all means is caustic soda, chemically speaking, sodium hydroxide or caustic soda. The substance is the strongest solvent of organic compounds, acts almost instantly.
Features of solid and powder chemicals:
When choosing household chemicals, you should carefully study the composition. Many reagents are based on alkali, such as sodium hydroxide. The chemical does an excellent job with greasy film, soapy deposits and food residues. Powder and granular products are usually packaged in disposable bags or large containers containing a volume of powder for several uses.
Dry mixes are easy to store. Usually they are packaged in durable polyethylene, which will not leak aggressive chemicals during transportation.
They work equally well on old cast iron and new plastic. Powders and granules differ in the concentration of the active substance. Granules act with greater aggressiveness, when using them more attention should be paid to the dosage. The concentration affects the price. The most effective granular products are more expensive, but thanks to them you can achieve a better result.
The granular preparation has a very high concentration. Small particles compressed into granules penetrate into clogged places and eliminate them. The chemical will dissolve even the most stubborn dirt. Approximately 30% of the total composition is alkali, corroding any organic matter in its path, from food debris to hair. To clean the pipe, from 70 to 100 grams of a concentrated substance is taken. This volume is enough to return the patency of the pipe. It will take only 5 minutes for the magic pellets to clean the sewers and effectively remove unwanted odors.
It helps to clean the sewer pipe by dissolving inside the pipelines and drains accumulations of dirt of animal and vegetable origin, mineral deposits. It is applied in household rooms, cafe, restaurants. When dissolved in water, the alkaline level rises and heat is released. A high concentration of the active substance in the composition of the product helps to quickly eliminate the blockage, while the throughput of the sewer is fully restored. You don't have to worry about pipe safety.
The active substance is sodium nitrate and caustic soda. The granules are blue. Positive customer reviews of the Chirton brand testify to the effectiveness and comparative safety of the chemical. The impression is overshadowed by the presence of a pungent odor, but it quickly disappears. After 15 minutes, there is no trace of him. One sachet is enough for a single use.
The tool is to the liking of people who are in search of a universal product that saves from blockages. It has a lower concentration than in other granular products. Alkali does not show its effect very strongly, so the product spares any coatings. It can be added to sewer drains, clean sinks, bathtubs. This does not damage the enamel, effectively removes rust. Good combination of price and quality. It is important to remember about security measures. Personal protective equipment (gloves, goggles, masks) will help to avoid unpleasant moments, such as skin irritation or mucous membrane burns. Packed in bags, dosed at one time (60 gr.).
The granules are optimally packaged, and one bag is designed for one cleaning, no need to measure milliliters, use measuring cups. Of course, a very important point: the absence of chlorine in the composition. That is why the substance almost does not smell, moreover, it does not corrode the pipes. Can be used for preventive measures. Contact with surfaces with copper, gold and enamel coatings should be avoided, this will have a detrimental effect on the condition of sanitary ware made of such materials.
The composition of the reagent includes caustic soda and surfactant. Under the action of hot water, after adding the product to the drain, a reaction occurs. Very caustic but highly effective. Eliminates any blockages in pipes in just 3 minutes. It is recommended for severe blockages, but it is better to carry out preventive measures with something more delicate. Granular particles easily dissolve in water and free from any traffic jams, consisting of fat accumulations, hair balls, calcareous formations, food waste, paper and plastic waste. Alkali-based chemically active components do not have a detrimental effect on PVC pipes and corrugated parts, so the products manufactured by the Israeli company Bagi Professional are quite suitable for cleaning plastic pipes.
This tool is one of the most aggressive, which obliges you to protect body parts and respiratory organs as much as possible when working. Due to the strong aggression, this chemical is best not used on worn pipes. The pungent smell can cause poisoning, it is recommended to work in a well-ventilated area.
With the help of a cheap granular substance, you can clean the plugs with high quality. Transparent white granules will remove blockage within a short time. To clean the sewer, the substance must be poured into the drain and add one glass of water. The composition includes soda ash (30%), so the powder is not very caustic. Sold in a cardboard container of 4 sachets.
The powder can clear difficult blockages. Ingredients: sodium and potassium hydroxide (30%), salts and surfactants. A high concentration of reagents allows you to quickly fix the problem. In a few minutes, it will help to decompose organic matter and mineral deposits. It has a balanced formula, so the chemical is less caustic, unlike representatives of leading companies, it is suitable even for worn drains. For cleaning, you need to add a couple of tablespoons of the powder to the drain. Such an alternative would be quite suitable. The economy option saves the family budget. Excellent for liquefying complex deposits in drains.
Efficiency is ensured by the high content of sodium and potassium hydroxides.When the substance enters the reaction, an unpleasant caustic alkaline odor will be felt, which will disappear after 5 minutes.
In this form, it can be used for pipes of all materials. Gel preparations have their own advantages. A viscous substance envelops parts of the sewer with a slimy film, which acts caustically on any accumulations that prevent outflow, saves from plaque, and prevents the appearance of new deposits. Small debris and fat slide over it and pass further into the pipeline. The composition of the gels includes active substances that dissolve fat, soap, hair. They are selected taking into account the properties of modern materials and do not corrode them. Therefore, gels can be used to clean plastic pipes. Many gels are more suitable for the prevention of sewer pollution.
Cleans pipes made of metal or plastic. It has a good formula for effective cleaning without damaging the sewer walls. With a minimum of pungent odors, the blockage problem will be solved in a short time. Due to the thick consistency, dosage is facilitated. Good penetration deep into the gap ensures the dissolution of all unnecessary accumulations that have closed the pipe. The reaction lasts a little over 5 minutes. If the pipes are clogged in significant areas, then the exposure time can be increased. The gel will destroy not only organics, but also inorganic contaminants such as paper and polyethylene.
Tiret Turbo will get rid of unpleasant odor for a long time.
Great for removing any foreign matter that prevents fluid from flowing out.Dissolves organic buildup, hair, inorganic matter and other debris in the drain. Works gently, without damaging the cleaned surfaces. Gives great results in minutes. Gel under force complex blockages. Thanks to the formula, it acts safely and gently on the pipes, ensuring their integrity.
For those who are looking for a cheap alternative to the above expensive gels, Sanfor is on offer. It has a similar action, it is in no way inferior to other more expensive brothers. The composition contains hypochlorites, sodium hydroxides, surfactants, chlorine salts. A violent reaction with water helps dissolve organics and eliminate sources of stench. The gel copes with small blockages in 5 minutes. The aggressiveness of the drug requires precautions.
Concentrated gel is used to clean the sewer. Removes traffic jams, eliminates fetid odors, kills bacteria. The solution is safe for all types of pipes, it contains completely natural components. The drug is completely soluble in water without harm to the microflora of the drain system. Ingredients: A-tensides 5-15% (vegetable origin), soda 5-15%, water > 30%
Another Israeli representative from Bagi. The gel eliminates complex blockages and unpleasant odors.It is used to prevent and eliminate the causes of blockage, the manufacturer guarantees a 100% result. Pleasantly pleased with the economical consumption: 110 ml per application (this is only half a glass of liquid). Dissolves organic and inorganic blockages, punching through any "plugs" even in stagnant water. Safe for all types of pipes - plastic and metal, including corrugated siphons.
The tool eliminates blockages, regardless of complexity. The gel contains potassium hydroxide, sodium, chlorine, various additives that serve to speed up the chemical reaction. The manufacturer recommends keeping one hour after pouring the gel, but in the case when the problem is small, the reagent copes with the task much faster. Its cost is much cheaper than many funds that are widely advertised. It can be used both for the prevention of blockages and in emergency situations.
Liquid products have been used for quite a long time to clean the sewer system. The composition poured into the drain enters all knees and bends, is introduced into the fatty coating on the surface and contributes to its dissolution. Aggressive liquids were used back in the Soviet period and have not lost popularity to this day. The good old proven tool "Mole" does not disappear from sale. Affordable price allows you to successfully compete with analogues. When choosing inexpensive cleaning fluids, you need to carefully dose the drugs.Often the composition includes strong and aggressive chemical compounds, they can harm the plastic drain system or ruin plumbing gaskets made of polymeric materials. Liquids are more suitable for cleaning old cast iron pipes. Modern materials are less resistant and may not withstand prolonged exposure. The main plus of liquid products is the cleaning of a large piece of pipeline. They remove local plugs and deposits that are far from the drain in the depth of the pipe. This improves the performance of the plumbing system.
This is a well-known and proven means of Russian production. The active substances that make up the liquid (sodium and potassium hydroxides, acetic acid) have a devastating effect on proteins and fats of both vegetable and animal origin. The drug is not inferior to foreign analogues, has an attractive price. The chemical reagent works for 2-3 hours. A simple and cheap tool, the reliability of which has never been doubted, removes any organic deposits, thanks to a powerful formula.
Liquid with high effect, eliminates all kinds of blockages. The agent can be used for all types of metal and plastic pipes, it does not contain chlorine. Regular use of a liquid preventative will save pipes from subsequent clogging and stench formation.
High alkali content requires protective measures: use of gloves, masks, protection from children, separate storage from food. Tightly closed factory containers with liquid should be kept in a cool place.At sub-zero temperatures, the liquid freezes, but when defrosted, it retains its previous properties.
Mechanical methods have not been canceled. Sometimes they are very effective. The procedure can be performed using one of the following tools:
Small blockages at shallow depths can be removed with a regular brush. If the blockage is further, and the length of the brush is not enough, then you can attach a flexible rod to it and break through the blockage with such a home-made device.
Soda and vinegar will effectively and carefully solve the problem. Many people like this method because it does not harm the inside of the sewer pipe. Take 1 cup of baking soda and about the same amount of vinegar. First, soda is poured into the drain, vinegar is poured on top.
In this state, the sewer hole is left for 2-3 hours, then the drain is washed with several liters of hot water. That's it: the sewer will be clean.
Sometimes pipes can save an ordinary lemon. To do this, squeeze the juice of fresh lemons into the drain and leave the pipe without running water for at least an hour.
The use of folk methods is equally effective for clogging and for prevention.
Solving problems with blockages in the presence of a large assortment of household chemicals is not such a difficult task. When choosing, you need to take into account the condition and material of the pipes, as well as the degree of clogging. The easiest option is liquids. Proven to be safe and gentle. At the same time speed suffers a little.Gel-like products give a great effect. They are convenient to use. The "heavy artillery" includes pellets. Ease of storage is the main advantage of powders and solids.
For severe pollution, “emergency” chemicals are suitable; in mild cases, it is better to choose a product that contains a lower concentration of the active substance. Safety must not be neglected, it is always important to remember protective equipment. Ventilation of the room, exclusion of access to drugs for children and pets will save you from trouble.