Rating of the best pipe cleaners of 2019

Home pipeline is one of the aspects of comfortable living, so its serviceability is important for every person. However, without regular maintenance, problems such as blockages occur, which causes serious breakdowns. To solve this situation, many resort to chemical means of cleaning pipes. The material below will help you make the right choice.

Attention! Find out the best clog removal products in 2022 read here.

Causes of blockage

In any apartment or private house, a channel system is installed that removes sewage. However, regular operation leads to the settling of various contaminants, which leads to clogged pipes.

The main factors causing blockages are:

• The use of the pipeline for other purposes. Ingress of sparingly soluble substances and compounds into the pipeline: food residues, hygiene products and pieces of rags or sponges, which are pressed into a lump, thereby blocking the flow of water;
• Errors in the design of sewerage. If the installation of pipes does not comply with the norms, such as the angle of inclination, turns or pipe connections, then it is necessary to change the entire sewer system to prevent blockage;
• natural deposition process. The active use of soap, detergent and protein content over time causes corrosion, so it is easier for residues to linger on the surface of rusty pipes;
• Lack of prevention. To keep the pipes clean, it is sometimes necessary to carry out preventive measures - light pipe cleaning.

Prevention of blockages in the sewer system

In order to avoid such problems, you should follow some ordinary rules:

1. It is necessary to throw away leftover food in the trash before washing the dishes;
2. A piece of toilet paper, rags, sponges or hygiene products thrown into the toilet can gradually form a blockage, so it is necessary to throw household waste into the trash can;
3. The habit of washing off cement, sand and plaster residues through the sewer also provokes a congestion, so you should not resort to such actions;
4. Within a month, it is worth applying a pipeline cleaner once, so that any residue does not lie on the surface of the pipes.

Signs of a blockage

The first sign of a clogged sewer system is a musty smell that comes from the pipeline.

With the constant use of the pipeline, protein and fat deposits begin to rot on the inner surface of the pipes, which become an obstacle to the flow of water, so there is a slow exit of the liquid from the washbasin.

Of course, at the beginning of the formation of blockage, this symptom is not strongly observed, but gradually the situation worsens.

Probably the most pronounced factor is when the water does not drain at all.

Criteria for choosing pipe cleaners - what are they?

The effect of pipe cleaners depends on the type of mold produced and the presence of chemicals. Guided by the desired result and the level of clogging, you should choose the right option.

Pipe cleaners can be divided into several types of consistency:

• liquid;
• powder;
• granulated;
• gel.

These species are similar in action, but differ in concentration and combination of chemicals in the content.

The first pipe cleaners were liquid versions, so they are more popular than many.Such types are slower than other types and are consumed faster, and also include caustic substances that can damage the sewer pipe made of plastic material.

Gel products are much more effective than other types, as they penetrate deep into the resulting congestion. Such options quickly dissolve organic sediment, covering the inside of the pipeline with a light layer of gel, which becomes an obstacle to the next blockage. The gel composition does not harm plastic pipes.

Solvents in the form of granules are considered the best means for cleaning pipes. Due to the content of active splitting substances, this product acts instantly.

The dry composition must be poured into the drain hole and pour the required volume of water. In a second, the reagents of the granular agent dissolve the formed raids inside the pipe. For such a case, 25-30 minutes is enough. The advantages of solvents in the form of granules should be considered savings, the safety of pipes and quick use.

Powder products are similar to the granular look. They are also economical in cost and efficient in operation. Of course, unlike granules, a small composition of the solvent can remain on the skin surface, get into the lungs, thereby causing allergies and burns.

Rules for cleaning sewer pipes

Before choosing the right solvent, you should stock up on information on the correct use of these substances. After all, the use of cleaning products based on chemical elements requires compliance with safety regulations.

1. It is imperative to read the instructions, which indicate which congestion the product affects, for example, such as organic substances, soap or grease.
2. Depending on the material of the pipes, it is worth choosing the necessary tool.After all, a granular product can favorably affect metal, aluminum and plastic pipes, and a liquid version is caustic for plastic.
3. It is necessary to pour or pour the product into the drain hole so that it does not fall on enameled or ceramic coatings.
4. When pouring or pouring the product, in no case should you lean your face against the drain hole so that the substances do not get on the skin, face or in the respiratory tract. The best option is to wear a mask and gloves.
5. After applying the solvent, it is worth ventilating the room by opening a window or door.
6. In order for the product not to damage the sewer pipes, it is worth using the solvent for a certain time specified in the instructions.
7. If the chemical content begins to go outside the drain hole, then it is worth stopping the action with a thin stream of water.
8. The content of chemicals in solvents can seriously harm the health of the family and pets, so it is necessary to store the product in protected areas of the house or apartment.

Rating of the best liquid pipe cleaners of 2019

Mole

One of the most popular chemicals on the Russian market is Krot. It copes with blockages of various types, such as grease, soap, paper, food waste and hair.

This product fights bacteria and odor coming from the pipeline. “Mole” is subject even to toilet blockages and pipes full of water. It is absolutely suitable for preventive measures, which prevents the subsequent occurrence of congestion.

The composition of the solvent includes:

• sodium and potassium hydroxides;
• chemical compounds (surfactants);
• varieties of acetic acid.

"Mole" has a low cost and is produced by several manufacturers, but these factors do not affect the power of the product.This product can be found in any stores in the form of a liquid, powder or gel, however, the first option is considered the most common.

Instructions for use:

1. First of all, it is necessary to pour or pour the required dose of the product (see on the package) into the drain hole;
2. Hold the product for about 4 hours (depending on the material of the pipes);
3. And lastly, you need to flush the drain with cold water. To prevent vapors from harming the skin or respiratory tract.

The price-quality ratio speaks of the cost-effectiveness and effectiveness of the sewer pipe cleaner.

• prevalence in all stores;
• powerful action;
• low price;
• fight against unpleasant odors;
• safe impact on pipes;
• active in any blockage.

• inconvenient packaging;
• long period of action;
• harmful to the skin;
• the presence of a strong odor.

Yplon Drain Cleaner

"Yplon Drain Cleaner" is a Belgian manufacturer, which is characterized by reliable performance, which helps to get rid of blockages in pipes quickly and easily.

The solvent contains sodium hydroxide, a substance that actively fights severe blockages. With a mild congestion, the reagent works in 30 minutes, but in a difficult situation, it may take 10 hours.

The Belgian product is quite effective for pipes made of plastic material, but harmful for aluminum and ceramic options. The tool can also be used for prevention purposes.

• effective for severe blockages;
• the possibility of using in fossilized formations;
• no unpleasant odor;
• convenient packaging with a locking lid;
• harmless to the skin.

• impossibility of application for pipes made of metallic material;
• long cleaning period
• high price.

Deboucher Active

Deboucher Active is a budget alternative to expensive sewer cleaners. It works well on any blockage like paper, grease, hair, animal hair, food residues and other organic matter.

A special solvent composition, including the necessary catalysts, surfactants, chlorine, potassium and sodium hydroxides, copes not only with complex congestion, but also helps in eliminating the unpleasant smell coming from pipes.

During operation, you should follow the safety rules according to the instructions:

1. First of all, it is necessary to pour 500 ml of solvent into the drain hole;
2. You should wait 1-2 hours for the remedy to work;
3. Rinse off dirt with strong water pressure.

If the pipeline is very clogged, then a liter of chemical should be poured out, leaving it to stand overnight.

• efficiency with any blockages;
• elimination of a fetid smell from pipes;
• protective cap for protection from children;
• budget price;
• slight smell of the product;
• no reaction with polymers;
• antibacterial.

• long reaction period;
• inefficiency;
• unsafe content.

Rating of the best gel pipe cleaners

Tiret

"Tiret" is an effective and popular gel that penetrates the structure of a strong blockage even with stagnant water. It is active in organic and inorganic blockages, and also does not affect the composition of pipes made of both metal and plastic material. The tool has a special formula that does not damage the inner walls of sewer pipes.

The gel has a thick consistency, which allows you to pour the right dose. After application, the product begins to act within a few minutes.Of course, with complex obstruction, more time is needed for exposure.

In addition to removing blockages, "Tiret" relieves the sewer system of a fetid odor for a long period.

How to apply "Tiret":

1. First of all, the solvent is poured into the drain hole (the required dose is in the product instructions);
2. For prevention and light blockage, you need to wait about 5 minutes, and for difficult situations, it will take 30 minutes;
3. After the required time has elapsed, the pipe is flushed with 2 liters of hot water.

For complete elimination, you need to repeat these steps up to 4 times in a row.

• fast action of the remedy;
• effective for organic and inorganic deposits;
• the possibility of using for pipes of any material;
• elimination of an unpleasant smell.

• inefficiency;
• high price;
• violent reaction.

Sanfor

Sanfor is an inexpensive alternative to Tiret gel that has similar capabilities. This tool copes with severe blockages of any nature in a short period of time. The solvent can also be used for prevention.

The main qualities of the Sanfor pipe cleaner are the disinfection of the kitchen and bathroom piping, getting rid of bacteria and eliminating unpleasant odors.

The solvent has a dangerous content, but effective, as:

• surfactant;
• hypochlorites;
• salts of ADTA;
• sodium hydroxides.

It takes 5-10 minutes for the gel to completely clean the sewer from hair, food sediments and fat, even if the pipeline is filled with water. True, in stagnant water, the reaction takes longer. When performing cleaning actions, it is worth adhering to safety rules.

The tool quickly copes with the problem that has arisen, while not damaging the surface of the sewer pipes, and thanks to the narrow and comfortable dispenser, getting into the drain hole with accuracy is not difficult. Thick consistency allows you to determine the required amount of gel.

• effective for complex blockages;
• elimination of an unpleasant smell;
• pipe disinfection;
• quick impact with severe congestion;
• convenient dispenser;
• safe for the pipe surface;
• budget price.

• dangerous composition;
• inefficiency.

Rating of the best powder and granular pipe cleaners

Chirton "Clean gutters"

Chirton "Clean Drains" is an effective and versatile tool from a foreign manufacturer, presented in the form of blue granules, powder or gel. It is a non-concentrated product that actively fights organic residues, soap scum and corrosion.

When the water reacts with the granules, a slightly alkaline effect occurs, which allows the product to be used to clean the kitchen sink, bathtub and toilet bowl. The solvent does not affect the enamel surface, while removing the rusty coating.

If you compare the cost of the product with its quality, then this is the best ratio, unlike other similar products. The granules are also active in cold water, which indicates the safety of using the drug.

The product is sold in packs of 60 grams, which is enough for one application. The solvent has a pungent smell, which disappears after airing the room.

How to use the powder product:

1. The drain hole must be dry before use;
2. Pour the contents of the sachet into the drain hole;
3. The agent must be poured with cold (300 ml) or hot water +80⁰C (1000 ml);
4. For the first option, you need to wait 15 minutes, and for the second - 3 minutes;
5. At the end, the pipe should be rinsed with water.

Operation of the gel solvent:

1. For one time, you will need 200-500 ml of gel, which must be poured into the drain hole;
2. After waiting 2-3 hours, it is worth flushing the pipeline with a large volume of water.

If the blockage is too strong, then you need to increase the period of action to six hours. When using the gel, it is worth remembering that it can react with nickel and chromium during prolonged contact.

The granular agent is applied as follows:

1. The drain hole must also be dry and clean;
2. Inside the hole you need to pour one and a half caps of granules;
3. After rash, this mass should be poured with cold water - 200 ml;
4. To clean, wait 20 minutes, and then rinse the hole with water.

Means for cleaning pipes Chirton "Clean drains" can be used for prevention 1 time per month. If the drain hole has a large diameter, then you can use a double dose.

• affordable price;
• fairly fast action;
• antibacterial;
• suitable tool for pipes of any material;
• rust control;
• getting rid of musty smell;
• economical.

• unpleasant odor upon reaction;
• inaccessible product;
• the need for hand protection.

Mr. muscle

"Mr. Muscle" is the right choice when dealing with difficult-to-clear blockages. This tool copes with the obstruction of both the sewer and the drainpipe.For single use, one bag of granules is provided, having the right dose, which does not require additional measurement. The product can be used for prevention.

The product contains caustic soda and alkalis, which, penetrating deep into the blockage, actively fight pollution. During the reaction, oxygen is released, which “breaks” the congestion.

The solvent is submissive to grease and soap deposits, which allows operation for kitchen sinks and bathtubs. In addition, the musty smell disappears, and pipeline coatings are disinfected. This quality becomes an obstacle to the appearance of fungus and mold.

The product should be applied as follows:

1. First of all, you need to make sure that the drain hole is completely dry;
2. The next thing is to pour the granulated contents of the bag into the hole;
3. This mass should be filled with a glass of water at room temperature;
4. After 30 minutes, flush the pipe with plenty of water.

If necessary, you can repeat the cleaning process. For prevention, once a month is enough.

• effective in action;
• fast reaction;
• antibacterial;
• fight against unpleasant odors;
• disinfection of the surface of sewer pipes;
• possibility of operation for any material of pipes;
• availability in all stores;
• acceptable price.

• dangerous for the skin;
• does not always solve the problem.

Bagi granules from blockages Pothan

Bagi Clog Granules Pothan is a pipe cleaner based on concentrated granules. This product is on the list of active chemical solvents used to deal with difficult blockages.

This option copes with paper, food, fatty and mucus residues in a short period of time - 3 minutes. It can be applied to pipes of various materials, which does not provoke corrosion reaction and deformation.

In addition to removing blockages, the solvent relieves the pipeline of an unpleasant odor. When carrying out monthly prevention, you can keep the sewer system in constant working order. However, for these purposes, it is better to buy cheaper gel options.

When using the product, you should follow some rules:

1. It is necessary to get rid of the liquid in the drain up to 5 cm down;
2. Pour the required volume of solvent into a dry hole (see instructions);
3. After waiting 3 minutes, it is worth pouring 200 ml of hot water;
4. After 3 minutes, rinse with warm water.

The product is based on strong substances, such as surfactants and caustic soda, which have a caustic effect and can form an unpleasant odor of a persistent nature.

• effective for complex blockages;
• fast reaction;
• getting rid of musty smell;
• suitable for pipes of any material;
• the presence of a blocker on the lid;
• convenient packaging;
• economy.

• high price;
• regular application is aggressive for pipes;
• dangerous for the skin;
• pungent odor upon reaction;
• unsafe composition;
• big package.

Solvent cost

№	Product name	Average cost (₽)
1	MOLE (1.2 L)	77
2	YPLON DRAIN CLEANER	145
3	DEBOUCHER	113
4	TIRET (1L)	420
5	SANFOR	145
6	CHIRTON "CLEAN DRAINERS" (60 GR.)	35
7	mr. MUSCLE	87
8	BAGI "POTHAN"	564

Problems with clogged pipes in the bathroom and kitchen lead to discomfort, so it is necessary to carry out monthly preventive maintenance of sewers and drains.If obstruction has appeared, then you need to choose an effective remedy to get rid of congestion and unpleasant odor. To do this, you should use the rating of the best pipe cleaners in 2019. Attention! The above information is not a buying guide. For any advice, you should contact the experts!