The Best Bathtub Cleaners for 2022

Everyone is faced with the challenges of reading their bathroom and is wondering how to choose the best product, using the recommendations of friends, colleagues and all kinds of advice about the best manufacturers and popular products on the market today.

What is important to consider when making a choice

When choosing household chemicals for your home, it is important to understand the purpose of the product used. The best manufacturers are working to solve the problems associated with pollution of plumbing in the home, developing and releasing improved products every year.

There are a very large number of tubes for sale on the market for cleaning surfaces, but it often turns out that the purchased product does not bring the desired effect or even causes harm. To make the right choice, you must pay attention to the following criteria, described below.

The Importance of Bath Coating and Strength

The instructions must necessarily indicate for which surfaces this product should be used, tips for use and the composition of chemicals. The type of chemical agent used is not only responsible for functionality, but is also the main selection criterion for various surfaces, the use of many substances is unacceptable and dangerous for certain coatings.

The desire to clean the bath from rust or limestone deposits requires effort, but it is important not to overdo it in the fight against problems, you can remove not only plaque, but also the top layer of the coating. To do this, you need to know what surfaces are, and which one is at home.

If you need to start cleaning hot tubs containing acrylic, you should not choose substances that include various strong acids. Acrylic is a very fragile coating and requires special products to avoid scratching the top layer.

Ingredients such as chlorine, acetone, gasoline, abrasive paste and alcohol-based emulsions should not be allowed to acrylic surfaces, it is also strictly forbidden to use powdered substances even without the above substances in their composition. The powder can damage the top layer of the acrylic coating, causing further damage to the surface.Another important point is to prevent the use of metal brushes and fiberglass sponges on this type of surface.

Cleaning rust from an enamelled bathtub may seem easy, but using too strong a product can remove the enamel layer along with the rust. Too chemically active substances must be used carefully and quickly washed off, without leaving them on the surface of the bath for a long time. It is better to carefully rub the problem area than to pay for the restoration of the bath.

Composition and desired goal

When deciding to clean the bath, you need to understand what task and goal the chosen remedy faces. Do you need to clean off old rusty stains that have darkened with time, or just disinfect and remove a little yellowness from the surface.

If you want to carry out regular maintenance of plumbing, then you do not need to choose too strong a tool, because the frequent use of various acids can affect the gloss and uniformity of the bath coating.

And in the case of darkened enamel and severe pollution, strong substances with an acid-containing composition should be used, otherwise it will be very difficult to clean the bath. But when using such tools, it is important to follow the instructions for use very strictly, and not to increase the time yourself. Exaggeration and delay can remove not only rust and lime deposits, but also expose the enamel to the metal layer.

Safe Application

Safety should always be remembered and not forgotten, especially for those who have small children and pets. It is also necessary to use them carefully for people prone to allergies and with increased skin sensitivity. It is best to use latex cleaning gloves during the procedures.

It is also important to remember that not completely washed off products can harm the skin upon contact during bathing, an unwashed bath can cause health problems. These substances should be handled very carefully and after finishing it is best to put them in a safe place, hidden from sunlight and away from children.

To wash off detergents from the surface of the bath, it is best to use a soft sponge or cloth, and then rinse with plenty of liquid, sparing no water to repeat the procedure several times.

Rating of the best funds, according to buyers

In the modern world, the production of the chemical industry presents us with a large selection of substances for various surfaces. Given the functionality and characteristics of the funds presented, you can choose the best company that is suitable for the type of coverage that is in the house and has the necessary functions.

The best choice for cleaning will be a product that helps remove existing blemishes while using a minimum of effort to clean, while maintaining the integrity of the coating, and will not harm people and pets living in the house.

Cif Cream

One of the popular and favorite products is Cif, it can gently clean the surface of the bath, and it is also used for tiles, sinks and faucets. The uniqueness of the recipe will help to cope with complex contaminants and dissolve them thanks to the microgranules in its composition. It is used for cast iron baths covered with sensitive enamel, and with constant use the surface will retain a sparkling and snow-white appearance.

The powerful effect on rust and plaque makes this tool one of the most favorite among housewives who want to preserve the enamel coating and cope with existing pollution with minimal labor and time. The manufacturer indicates that the mixture will need to be distributed evenly over the entire area and wait 5 minutes, then rinse with plenty of running water. The creamy formula makes it easy to apply and gently remove residue. The greatest number of positive reviews was collected by the Cif Cream Ultra White series.

Average price and volume: about 80 rubles per 0.5 liter.

• nice smell;
• strong formula;
• easy application;
• does not damage the surface.

• no.

comet

Creams or gels are used for enameled cast iron bathtubs, so another popular inexpensive remedy is Comet Gel. Many people have heard about the properties of this product, it is often seen in advertisements, but it can really effectively remove old plaque and streaks in bathtubs.

You will need to apply the product on the surface for 10 minutes and leave, distributing an even layer over the entire coating. Then rinse with water or rub a little with a sponge (depending on the degree of neglect). An additional function is the disinfection of the bathroom from unfavorable microorganisms and the creation of a protective film on the surface, thanks to special additives in its composition. Repeated use for some time of this product will help to maintain cleanliness for a long time.

Average price: 120 rubles for a bottle of 500 ml.

• removes all types of contaminants;
• additionally disinfects;
• protects against future pollution;
• does not contain aggressive components.

• slightly pungent smell.

Mr Chister

For acrylic and cast iron bathtubs that are afraid of strong acids, Mr. Cleaner is a good choice. According to customer reviews and the effect obtained, it is one of the best budget funds designed specifically for such products. It can be used for quick cleaning, prevention and to eliminate serious problems.

It is necessary to apply on the surface for 5 minutes and distribute over the entire area, if there is heavy pollution, in case of small and unopened cases, as well as in the presence of yellowness, it is enough to simply wipe with a sponge after application.

The liquid has a low density, so it is suitable for vertical surfaces - showers and glass. Careful treatment of the acrylic layer and adding shine give it an advantage in choice, and the excellent result makes the owners return to this product again.

Average price: about 100 rubles per 500 ml

• antibacterial properties;
• possibility of application for acrylic, shower cabins, cast-iron surfaces;
• does not scratch;
• pretty nice price.

• in the presence of serious problems, it will be necessary to process carefully or several times.

Acrylan, Bagi

Housewives with acrylic baths will appreciate the work of this product from Bagi, especially the speed - apply, wipe and rinse. Also it can be used for glass, shower enclosures, tiles and ceramics. This product combines perfectly substances for effective cleaning of rust and plaque, and for disinfection from bacteria and even fungal infections.

A convenient spray gun will help to spray the product on the surface evenly and in the same amount.This product can also be used for enamelled coatings, it is suitable for any contamination and will cope with it quickly.

Average price: almost 400 rubles per 400 ml.

• suitable for various coatings;
• disinfectant properties;
• convenience and speed of application;
• does not scratch acrylic.

• rather high price in comparison with other manufacturers;
• strong chemical odor.

Cillit Bang Spray

One of the best and most popular bathtub cleaners in a convenient spray form. After the end, you can purchase a replacement bottle at a price slightly cheaper. Many people trust this brand in their bathroom, this tool is universal, it is suitable for removing dirt on plumbing fixtures and for cleaning tile joints.

The composition of the product contains strong substances, so it should be applied carefully so as not to damage the enamel. Do not keep the product on the surface for more than 5 minutes, and immediately after application, distribute in a circular motion with a sponge, and then rinse with a sufficient amount of running water.

Average price: more than 280 rubles in a volume of 750 ml.

• removes plaque well;
• there is a replaceable bottle;
• no pungent odor.

• old rust stains are not removed as effectively as plaque.

Domestos, Expert Strength 7

This product is universal and is often used by housewives to clean the bathroom and toilet, saving money on purchasing two different tubes.

It is produced in liquid form and after application it is necessary to start cleaning immediately, after 5 minutes it must be washed off so as not to damage the surface.It has good antibacterial properties and removes all unpleasant odors, bacteria and fungal pathogens. Good for regular maintenance and cleaning.

Average price: about 100 rubles per 500 ml.

• good disinfection;
• quick effect;
• nice smell.

• with very advanced stages of pollution will not cope.

Folk remedies in the fight for purity

The use of chemicals for cleaning is not always possible due to the presence of allergic reactions living in the house, or the inability to purchase this product. Then you should use folk advice to prepare an effective cleaner at home.

Soda

Before the active development of the chemical industry, even our grandmothers used soda to clean the bathroom and sink. To obtain the necessary funds, you need to mix soda ash and ordinary soda in equal proportions. After that, spread it over the wet surface of the bath, leaving it for about 10 minutes.

Then you should proceed to the next stage of cleaning the bath - applying bleach and vinegar, diluted in equal amounts. This mixture is applied over the soda, enhancing its cleaning functions. Leave it in this position for about 40 minutes. This method should only be used for old bathtubs, otherwise soda can scratch the top layer of the coating.

Vinegar

If soda is usually used for old and rusty bathtubs, then for new ones that have lost their luster and have a slight yellowness, it is better to use vinegar - a less powerful remedy.

In order not to suffer, rubbing the bath with vinegar, you should soak paper napkins with a solution and cover the entire bathroom with them for 5-7 hours.After that, you need to remove the napkins and wash off the remaining vinegar in the bathroom.

This product is well suited for cast iron bathtubs, being almost the best agent for cleaning this type.

Lemon acid

Another home remedy for cleaning bathtubs is citric acid, which is used by housewives to get rid of yellowness.

To obtain a solution, you need to mix a lemon with water in a ratio of 1 sachet per 200 ml. Using a soft sponge, wipe the surface, spreading the solution over the entire surface and leave for 15 minutes. These manipulations must be carried out strictly with gloves, such a concentration of citric acid can severely damage the skin of the hands, although it is not terrible for enameled coatings.

Plaque removal

Sometimes removing the yellow is not the only problem, the quality of the tap water takes a toll on the surface of the bathtub and it starts to get covered in limescale, remaining on plumbing fixtures and wherever water has dripped.

The best home remedies for such a problem would be:

• Ammonia solution - this will require 3 tbsp. stir with 200 ml of water. Apply the resulting mixture in a thin layer on the existing plaque, then wait about 10 minutes and rinse with running water, removing the residue with a rag.
• Lemon Juice - You can use a fresh lemon or a solution with a high concentration of lemon juice. It is necessary to rub the place of plaque formation well and leave for 15 minutes, then it will be easy to wash off the traces of plaque.
• If there is a long-standing plaque, you will need to apply a mixture of salt and vinegar. Using an equal ratio of these ingredients, you can get a clean bathroom.

Conclusion

Describing the correct choice for certain surfaces and ranking the best products will help you decide which product to buy for your existing bath, and how much it will cost for your budget.

It is important to understand that the bath has been polluted for more than one day and it is not always possible to clean it right away in an instant, and this is not a reason to give up and immediately give up in an attempt to achieve the desired result. It is better to start cleaning a little from the most neglected and dirty areas, then the result will be visible, and there will be motivation to finish what you started.

A snow-white shiny bathtub, an excellent state of sanitation in the bathroom will delight the whole family and give the hostess the feeling of well-spent time.