The most problematic and troublesome cleaning is after renovations, where ordinary cleaning products for order will not be able to cope with the dirt of a high degree of complexity, especially if you need to get rid of the concrete on the surface. There are various preparations on the market that effectively eliminate any dirt. However, each tool has its own purpose, suitable for a particular type of coating. In this regard, the question arises, how to choose the right product. Attention is presented with an overview of the best preparations for external and internal cleaning after repair for 2022 with its pros and cons.
Content
In comparison with conventional cleaning products, the content of caustic substances in them is many times less than for the goods of the group under consideration.
Products are classified into three categories: acidic, neutral and alkaline. The first group is used to remove complex building pollution. In order not to make mistakes when choosing, you need to focus on the “pH” indicator - a range of numbers from 0 to 14. Decoding:
Note! The higher the acidity, the more effective the remedy.
Acidic substances get rid of mineral contaminants (for example, rust, lime and calcium deposits, efflorescence and scale). The composition of the product may include one or a whole complex of acids.
Surfactants - an indicator that combined pollution can be cleaned. The liquid can prevent corrosion (sometimes inhibitors are added to the composition).
If you want to get rid of heavy mineral deposits, rust from acid-resistant surfaces, then the pH value should vary between 0-2.
Note! Cement is a heavy mineral contamination.
If it is required to remove lime deposits, rust, residues of dry building mixtures, efflorescence from hard and chrome-plated surfaces, clean phosphorus, faience, brickwork, ceramics, tiles or tiles, then a preparation with a pH of 2-5 is required.
If you plan to clean sanitary blocks, then:
Important! Acid solutions are not suitable for marble surfaces.
Based on the above information, you can make several statements that will help you understand which product is better to buy.
There are two categories of products: professional and household series. The average volume for cleaning companies is 5 liters, for home conditions - 500-1000 ml.
If the composition contains one acid, then it is suitable for cleaning specific contaminants, if there are several, then the product is considered universal and is suitable for a wide range of dirt and surfaces.
Budget home preparations are used, in most cases, only for internal work. The professional series is suitable for façade work.
Depending on the degree of complexity of contamination, a solution is made (the proportions are indicated in the instructions). Some models come with a natural function - they can be used in their pure form (rare).
Note! When working with acidic liquids, protection is always required: gloves, goggles, clothing, depending on the degree of harm.
If the tool is selected for professional use, then it is better to purchase it in hardware stores. If the purchase is made for domestic conditions, then as a place of purchase, you can choose a point of sale with construction products or household chemicals, as well as order products in an online store.
Ordering online is the easiest if time permits, and customer reviews will tell you about the effectiveness of the product.
This category includes Russian-made goods. All of them are supplied in plastic containers, have the same usable volume, but their composition and method of application are slightly different, which affects the cost of the product. Top Producers:
Note! Large volumes of solutions have found, in the main, professional use and are operated by cleaning companies.
Purpose: for tiles, glass, granite, marble on which there are remains of cement, concrete, as well as rust, limescale, building mixtures.
The product is delivered in a white plastic canister. On top there is a handle for convenient transportation of liquid and a neck with a green screw cap.The color of the solution is blue.
Recommendations for use: 200-300 g of the substance per 1 liter of water.
Specifications:
Vendor code: | 125305 |
Type of: | acidic |
Capacity parameters (centimeters): | 13/18,5/30 |
The weight: | 5 kg 900 g |
Nominal volume: | 5 liters |
Compound: | organic + inorganic acids, water, dye (blue), fragrance, surfactants |
Hydrogen indicator: | 2 pH |
THAT: | 2380-005-92962787-11 |
Best before date: | 18 months (1.5 years) |
Producing country: | Russia |
By price: | 754 rubles |
Purpose: for cleaning acid-resistant surfaces, cleaning and washing brickwork and joints.
Yellow liquid in a white translucent canister with handle and screw cap, used to remove residual cement, mortar, lime and salt deposits, also cleans scale, glue, grout, rust smudges and calcium carbonate efflorescence. Depending on the degree of contamination, the solution is prepared with different dosages (1:10 or 1:100).
Recommendations! 1. In the process of cleaning, you need to use protective gloves, a suit and goggles. 2. Not compatible with chrome, copper, marble, anodized aluminium, galvanized or enameled surfaces.Also, the solution is not suitable for processing artificial stone, parquet, laminate, glazed tiles.
Specifications:
Type of: | concentrate |
Net weight: | 5 kg 130 g |
Volume: | 5 liters |
pH level: | 1 |
Capacity parameters (centimeters): | 15/20/23 |
Storage temperature: | +1-+25 degrees |
Compound: | inorganic acids, water, surfactants, surfactants |
Storage stability: | 36 months (3 years) |
Manufacturer country: | Russia |
Average price: | 675 rubles |
Purpose: to remove rust, mortar and efflorescence, cleaning facades.
The cleaner is one-component, supplied in a white canister with a top handle and a lid (black) that is screwed onto the neck. It is used for internal and external works. It is applied to the surface with a sprayer, foams a little, easily removes dirt from the area.
The label details how to dilute the liquid and how to properly clean the desired area.
Specifications:
The foundation: | acidic |
Application area: | for cleaning acid-resistant surfaces: floors, walls, facades |
Vendor code: | 013-5 |
Nominal volume: | 5 liters |
pH value: | 1.5 |
Degree of foam: | low |
Wash temperature: | 20-40 degrees |
GOST: | TU 2381-003-87363917-2012 |
cationic surfactant: | 5 percent |
Best before date: | 5 years |
Producing country: | Russia |
Average cost: | 520 rubles |
This series includes household chemicals, the container volume of which does not exceed 1000 ml. According to their composition, storage capacities, they differ from each other, which affects the type of surfaces with which a single product can work. Popular models are from foreign and domestic production firms. The best representatives:
Note! Almost all of the presented models are universal.
Purpose: for post-construction cleaning.
A black plastic canister with a large side handle and a mouth with a red screw-top cap, contains an acidic liquid that rids surfaces of rust and limescale. Easily and quickly rids surfaces (not sensitive to acid) of cement residues, mortar.
Solution preparation: 200 ml per liter of water; get rid of lime and cement 1:5; for very strong pollution use a ratio of 1:3.
Application: the liquid is applied to the surface, wiped with a sponge and washed off with water after a few minutes.
Recommendations: 1. Before work it is necessary to check the surface for resistance to the product. 2. Rubber gloves must be worn during operation. 3. Do not allow the liquid to dry on the surface until the end of cleaning.
Specifications:
Type of: | concentrate |
Volume: | 500 ml |
Packing parameters (centimeters): | 13/5/23 |
The weight: | 1 kg 300 g |
Scope of use: | for various surfaces |
Compound: | distilled water, active ingredients, hydrochloric acid |
Surfactant: | surfactants not more than 5% |
Release form: | liquid |
Producing country: | Israel |
What is the price: | 370 rubles |
Purpose: for cleaning surfaces during the repair of buildings and structures, swimming pools, facades, floors and walls in rooms, as well as equipment for the preparation and transportation of concrete, its external and internal washing.
Appearance Description: White flat bottle with a green cap containing a detergent that quickly removes cement residue, plaque and rust. Feature of the product - contains a corrosion inhibitor, is used for processing tools, external and internal work.
Instructions for use:
Dosage: for stubborn stains, the liquid can be used in its pure form; for cleaning after repair, dilute in a ratio of 1:100, that is, 10 ml per 1 liter; for cleaning from cement and other complex stains - 1: 5, that is, 200 ml per 1 liter of water.
Note! Gloves must be used during work.
Specifications:
Vendor code: | 125441 |
Scope of use: | construction |
Nominal volume: | 1 l |
Release form: | bottle |
Type of: | liquid, acid |
pH value: | 2 |
Compound: | water, organic acids, non-ionic surfactants, fragrance, dye |
Best before date: | 2 years |
Storage temperature: | +5-+35 degrees |
Fits: | for granite, glass, polymer coatings, tiles, etc. |
Manufacturer country: | RF |
Price: | 217 rubles |
Appointment: for mopping.
A white plastic bottle with a handle and a measuring screw cap contains a concentrate in the form of a gel. It has an antibacterial effect, eliminates unpleasant odors, eliminates lime.
Material with which the gel interacts: natural / artificial stone, wood, rubber, PVC, vinyl, ceramics and laminated surfaces.
Features: up to 5 freeze / thaw cycles are allowed, while all properties are preserved in their original form.
Specifications:
Type of: | gel |
Volume: | 1 liter |
Packed dimensions (centimeters): | 7,15/25,5/12,05 |
The weight: | 540 g |
Dosage: | 1 cap for 3 liters of water |
Cap capacity: | 30 ml |
Equipment: | bottle |
Storage temperature: | +5-+35 degrees |
Compound: | functional additives, water |
Guarantee: | 2 years |
Manufacturer country: | Russia |
Price: | 175 rubles |
Purpose: for cleaning ceramic tiles in sanitary ware, as well as chrome-plated, varnished surfaces from the oldest residues, deposits, dirt after cement and lime mortars.
The white plastic bottle with blue screw cap can be used indoors and outdoors. It is used to wash off dirt, residues and stains that have arisen from the minerals contained in the water, rust and more. The product is suitable for processing sanitary ware, stone and ceramic tiles (clinker, gres, terracotta, glazed), as well as chrome, lacquered, stainless steel and artificial materials surfaces.
Since the solution contains an inorganic acid, it cannot be used on bases that are not resistant to it (for example, marble, enamel). Protective gloves must be worn during cleaning.
Note! The instructions describe in detail how to use the drug and dilute it for a specific type of pollution.
Specifications:
Type of: | concentrate |
The weight: | 1 kg |
Packing parameters (centimeters): | 10/24/10 |
Container: | bottle |
Solvent type: | inorganic |
Cleaning tools: | brush, sponge |
Storage temperature: | 0+ degrees |
Shelf life: | 36 months (3 years) |
Manufacturer country: | Poland |
Average cost: | 350 rubles |
Purpose: for quick and complete removal of traces of cement, lime, whitewash from glass, plastic, tiles, porcelain, enameled products and work clothes, construction tools and containers.
The liquid comes in an attractive, easy-to-use bottle (has a handle) that is fitted with a screw cap (which is a measuring cup). It quickly removes cement and lime after repairs, as well as other types of dirt.
Tips! 1. Do not mix with other products that contain active chlorine. 2. After applying the liquid, you need to leave the surface untouched for a while for a more effective effect, and then rub with a brush and rinse with water.
Specifications:
Type of: | acidic |
Vendor code: | 300148 |
Useful volume: | 1 liter |
The weight: | 1 kg 280 grams |
Package size (centimeters): | 8/14/25 |
Where applied: | at home |
Surfactant: | nonionic surfactants not more than 5% |
Production: | Russian |
By price: | 295 rubles |
Appointment: for removal of construction solutions.
Mini version of the CEMENT CLEANER 125305 model from this manufacturer. The bottle is flat white, transparent, the color of the liquid is blue. The solution is not compatible with materials: slate, marble, travertine. In addition, it cannot be used on chrome, enameled surfaces, concrete and glazed tiles.
Recommendations! Requires a preliminary test for reaction with the solution in an independent place on the work surface.
Ingredients: various acids, dye, fragrance, water and surfactants.
Specifications:
Type of: | acidic |
Nominal volume: | 1 liter |
pH value: | 2 |
Specialization: | renovated, for tiles |
THAT: | 2380-005-92962787-11 |
Working temperature: | +0-+35 degrees |
Container material: | plastic |
Guarantee period: | 1 year |
Production: | Russian |
Average price: | 197 rubles |
According to buyers, the best cleaning products after repair work are Russian-made goods. Domestic manufacturers produce solutions for various purposes, volume and composition. There are inexpensive and expensive lines. The former include household products, while the latter are professional products (cleaning). The main difference between the two categories is displacement.
Table - "Popularity of models of cleaning products after repair for 2022"
Name: | Brand: | Nominal volume (l): | Type of: | Average price (rubles): |
---|---|---|---|---|
CEMENT CLEANER 125305 | Grass | 5 | acidic | 754 |
"Duty Extra 118-5" | PROSEPT | 5 | concentrate | 675 |
Alfa-19 | "Pro Brite" | 5 | acidic | 520 |
"Cementin" | "Bagi" | 0.5 | concentrate | 370 |
«Cement Remover» | Grass | 1 | acidic | 217 |
"Gel for cleaning after repair and construction" | PREMIUM HOUSE | 1 | concentrate | 175 |
"SZOP" | Atlas | 1 | concentrate | 350 |
"From Cement" | Unicum | 1 | acidic | 295 |
«217100» | Grass | 1 | acidic | 197 |
Which company is the best tool is up to the buyer to decide. Common displacement 1 or 5 liters. The cleaner must be bought based on the front of the upcoming work.