Rating of the best grinding skins for 2022

The smooth surface of various products made of wood, plastic, metal, plexiglass, ceramics is the dream of every master. Achieving high quality by grinding and polishing is possible by manual or mechanized method with the right choice of abrasive skins. What types of abrasives exist, what is the specific application of each, how to make the right choice - questions that the following review will help you find the answer to.

What it is?

Sandpaper or sandpaper is a special abrasive material for preparing surfaces for further use. An abrasive applied to one side can be considered as a large number of small cutters that successfully cope with the existing old coating, bumps, burrs or other problems on workpieces or repaired products.

The skin is selected taking into account the processed material and the technology used. It is important to take into account not only the size of the abrasive (grain size), but also its composition, moisture resistance and elasticity of the base. The right choice of sandpaper will help you quickly complete the necessary preparatory work.

What will the marking of grinding skins tell about?

Sandpaper marking is affixed on the basis in accordance with Russian GOST. The ability to navigate in its elements will allow you to quickly select the right material. The marker consists of 7 components:

1. Abrasive index:
   • K - electrocorundum;
   • C - silicon carbide;
   • G - zirconium electrocorundum;
   • A - doped electrocorundum;
   • V - white electrocorundum;
   • S - ceramic electrocorundum.
2. The foundation:
   • paper (P);
   • tissue (K);
   • latex (T);
   • polyester (X)
   • fiber (F);
   • combined (C).
3. Binders when applying abrasive: numbers from 1 to 9 (1 - resin, 2 - glue, 3 - a combined version of glue and resin, 4 - varnish, 5-9 - complex compounds for official use).
4. Type of abrasive application. The most popular: 1 - open, 3 - stearate, 4 mixed.
5. Base properties for paper thickness (from 85 (A) to 500 (G)) and flexibility.
6. Water resistance index (W)/
7. Grit: coarse (P20-P30), medium (P36-P100), fine (P120-P180), fine (from P220 and above).

What to pay special attention to?

Sanding base

When choosing sandpaper, it is important to understand on what basis it is made. This element determines the wear resistance, flexibility and water resistance of the material as a whole. The paper base allows you to quickly tear off the desired piece without resorting to scissors. But it quickly wears out on the folds, has a low mechanical threshold, and is not waterproof. The advantage of such a basis is the price of sanding sheets.

Rolled sandpaper and sanding discs are made on a fabric or polyester basis. This gives approval for wet and machine applications. The elasticity of the skin allows you to take the form of the treated surface, and water resistance does not impair performance and wear resistance even at high humidity indoors.

Grain

The smaller the grain size, the coarser the abrasive. This version of the skin is suitable for rough initial surface treatment. For a tree, the run-up of the indicator is up to P600. With the help of such paper, the final grinding and polishing of coatings is carried out.

Fine and fine grit options are used for the preparation of surfaces made of metal, ceramics, plexiglass, as a rule, during wet mechanical processing in a large number of revolutions. For home use, a sufficient grit level is P500.

Release form

For the convenience of the work carried out, manufacturers offer a choice of sanding paper in the form of:

• sheets;
• roll;
• tapes;
• round or triangular disk;
• cylinder.

Rating of sanding sheets for all types of work

FULL SET-2 (140x115mm), 8 pieces

The average price is 395 rubles.

Created on the basis of Swiss abrasive technologies and includes materials that meet the international FERA standard. Due to the specified completeness, sanding sheets can be used at different stages of surface treatment when sanding varnish, paint, metal, wood, plastic, epoxy resins, composite materials.

• versatility in terms of processed materials;
• sheets of various grain sizes;
• international quality technologies.

• not identified.

FUJI STAR HAND SIZE, 140x115mm, P1000, 4 sheets

The average price is 280 rubles.

The standard international size of 140 x 115 mm allows the material to be used on any tool for manual and machine processing. The material has a good degree of water resistance. The abrasive silicon carbide coating is wear resistant due to its self-sharpening ability. The quality of polishing due to the abrasive material and grit determines the widespread use of sanding sheets for repair and painting work in the automotive industry.

• polishes well;
• does not fall apart with any work technology.

• price.

Zolder, P800, 10 sheets

The average price is 245 rubles.

Type B paper-based sheet material is suitable for manual processing of metal, plastic, wood. Grit provides fine grinding. The abrasive is treated with aluminum oxide, which makes it possible to use one sheet for a long time without clogging it with dust during operation. The strong adhesive fastening of the sandpaper allows the use of a sanding sheet for machine processing. Sheet size - 28 cm x 23 cm.

• flexibility;
• good water resistance;
• the possibility of perforation.

• weak paper base.

GROSSMEISTER, P150, 5 sheets

The average price is 180 rubles.

Grinding skin for working with any materials well removes bumps, notches. When working with metal, it is suitable for pre-treatment before painting: getting rid of rust, cleaning chips. The final processing of wooden products using such sandpaper allows you to get a finished surface for the subsequent application of a paint and varnish coating.

• fabric base;
• water resistance;
• possibility of use in any technology.

• price;
• number of sheets per pack.

LOM, 23 x 28 cm, P1000, 10 pieces

The average price is 360 rubles.

Standard size sanding sheet suitable for manual dry work. Surface treatment of ceramics, plastic, wood, metal is carried out to improve the quality before the following stages of work: gluing, varnishing or painting. Grit P1000 sanding paper is suitable for finishing.

• good performance in dry processing.

• granularity does not correspond to the declared;
• paper base;
• poor water resistance.

Rating of roll sanding paper

Zolder, 115 mm x 5 m, P100

 

The average price is 240 rubles.

Coarse-grained sanding paper (P100) is suitable for primary processing of products from any materials. The aluminum oxide coating prevents the accumulation of dust and sanding residues. The material is suitable for manual work and machine processing, is not afraid of moisture. The manufacturer guarantees quality, high performance, extended service life.

• flexibility;
• quality of processing complex contours;
• performance at high speeds;
• long period of use.

• not identified.

Mirka Mirox on paper, 115 mm x 5 m, P180

The average price is 450 rubles.

Sanding paper of this brand is used for manual work. The quality of the fabric-based material with a semi-open abrasive coating provides a high degree of elasticity and wear resistance. Coating with aluminum oxide and the use of synthetic resins as a binder allows the work to be carried out using the sheet for a longer period of time.

• high quality;
• use in finishing works;
• wear resistance.

• use only for dry grinding.

H-6(R-240) on a fabric basis, 100×80 cm

The average price is 590 rubles.

Grinding paper is produced by the Belgorod Abrasive Plant on a fabric basis, which creates conditions for use in any processing technology: dry and wet, manual and machine.High-quality preparation for gluing and painting plastic, wood, metal and ceramic surfaces is due to the graininess of the material using carpentry abrasive.

• fabric base;
• universality;
• water resistance;
• flexibility.

• sheet size.

ABRAforce 60933, 100 mm x 3 m, P180

The average price is 520 rubles.

Abrasive paper with grit P180 is suitable for primary rough processing of metal, ceramics, plexiglass, wood, and plastic products. The roll format and the fabric backing provide convenient application in both manual and machine (using vibratory grinders) technologies. The manufacturer recommends sandpaper of the stated quality for dry sanding.

• abrasive quality;
• high performance;
• wide range of applications.

• low water resistance.

J FLEX, 100mm*25m, P80

The average price is 1710 rubles.

Flex recommends the use of P80 grit roll paper for polishing, sanding and deburring various types of surfaces. Closed backfill abrasive based on artificial resin bond provides high wear resistance of sanding paper. The low stretch of the waterproof fabric base determines the high strength.

• wear resistance;
• the possibility of application with any technology;
• surface finish quality.

• not identified.

Sandpaper rating for sanding discs

FLEX perforated D225 PF-P80

The average price is 1920 rubles.

Specialized perforated sanding paper for professional Flex equipment.Sanding discs with a diameter of 225 mm are designed for preparatory work on products made of materials of any profile. Removal of any paintwork on surfaces of a large area is carried out for a long time without replacing the disc. The perforated form protects the material from rapid abrasion and clogging with waste from work.

• wear resistance;
• good fastening;
• flexibility;
• stability with machine technology.

• price.

Razaian RST-84, 125mm, P150, Velcro

The average price is 650 rubles.

The abrasive wheel is designed to work with an angle grinder. The diameter of the round sanding paper will fit a standard 125 mm sanding wheel. The sandpaper is made on a paper basis, it is conveniently attached. Replacement on the equipment will not take much time. Suitable for processing any materials. Cleaning welds, rust, surface preparation for painting is not difficult. The most complex terrain is well processed due to the flexible base. Includes 100 sheets.

• ease of use and replacement;
• reliability;
• use for dry and wet technology.

• packing volume.

Sanding discs 888, 125 mm, P200

The average price is 205 rubles.

Sandpaper with a special round shape is suitable for work using a drill or angle grinder. The abrasive coating is made with the application of aluminum oxide to ensure high-quality grinding without clogging with dust. The circle is made on a nap lining. Use is permissible for dry processing of any materials: wood, metal, plastic. There are 10 pieces in a package.

• price;
• good attachment to the emery wheel;
• ease of use.

• cannot be used when wet.

FASTER TOOLS 125 mm, P1200, 5 pieces

The average price is 325 rubles.

The use of abrasive wheels is recommended when processing various types of surfaces using eccentric grinders or special nozzles for a drill. Sanding wood, plastic, welding seams, car bodies is possible both during dry and wet sanding. Reliable Velcro Velcro provides easy fastening. Abrasive aluminum anti-clog coating and seven holes for quick dust extraction create a comfortable working environment.

• reliable fastening;
• universal size;
• grinding quality;
• water resistance.

• not identified.

Mirka, 225 mm, Р240, 5 pieces

The average price is 1200 rubles.

Mesh abrasive coating expands the range of applications of sanding paper. It is suitable for all types of work, including sanding putty. The versatility of the disc is achieved by the possibility of using it on any grinding machines and ensuring dust-free processing of walls and ceilings. The mesh structure of the abrasive protects against clogging by grinding products.

• mesh structure;
• universality;
• high wear resistance;
• convenience in work.

• price.

How to choose?

Before purchasing grinding skins, you need to decide on the list of work that needs to be done when using it. The planning of the technological process is also of great importance: some types will be useful for manual processing, others for machine processing.It is equally important to consider the possibility of wet grinding. The sanding steps require paying attention to grit and abrasive application methods.

Many manufacturers are now focusing on the production of universal abrasive skins. The purchase of the kit will allow you to implement all kinds of projects at no additional cost. To perform large volumes of work, manufacturers offer sets of the appropriate quantity or size.

Where could I buy?

A large selection of sanding skins of any format is presented on various Internet sites for the sale of goods for construction work and organizing home space. So on Yandex.Market, more than 2,000 offers from various manufacturers and sellers were received upon request. Not only a variety of forms are presented, but also the volume of equipment.

For professional use, it is better to contact specialized outlets. Manufacturers of construction equipment will offer the most suitable components for the brand of equipment used. Some companies produce consumables for their equipment themselves, for example:

• Flex is a manufacturer of sanders, including those with a telescopic mechanism, offering sanding sheets in both roll and disc formats of any grain size.
• Garvin is a Russian specialized store focused on the automotive tool market. The site presents a wide range of grinding equipment and consumables for industrial and home use.
• All tools - an online service for ordering and purchasing both construction tools and related products specializes in Russian components.

The rating takes into account indicators of granularity and versatility of use in industrial or domestic use in construction and repair work. Focusing on the price factor is not worth it, since the quantitative equipment or the dimension of the sandpaper is very different in different suppliers.