Rating of the best prefabricated wheels for 2022

The best car manufacturers are trying to equip their offspring with expensive and exclusive wheels. Along with a unique appearance, combined discs are attractive due to their robust construction, which has a positive effect on the functionality of the product.

general description

The concept of "prefabricated disk" means a special design consisting of several elements. As for passenger cars, this is an improved copy of cast and forged versions. Distinctive features are durability and the presence of design ideas.The variety of combinations allows you to achieve perfection in the tuning process. So, you can often encounter all kinds of cores.

It cannot be said that this production technology belongs to the category of novelties, since most specialized equipment is equipped with multi-component wheels, the main elements of which are:

• rim;
• lock rings;
• side rings.

Why did special equipment need such prefabricated structures? They simplify the tire beading process. We are not talking about aesthetics in this case.

Combined products for passenger cars may include two or three components. In the first version, we are talking about the rim (inner or barrel) and the core. The second case involves the presence of a rim, a core and a plank (shelf). All elements are fastened together with high-strength bolts.

Another type of prefabricated structure is the beadlock rim. What it is? Bedlocks are wheels of an anti-disassembly type, an analogue of locks. Such models are often used for low-pressure cross-country racing, such as jeeping. Often installed for extreme racing, drag racing and so on. Beadlock is able to prevent the cover from being torn off the discs at too high speeds.

Positive and negative characteristics of prefabricated disks

Produced popular models differ in design, material of manufacture, structure, which has a significant impact on the quality of the wheel. Build quality is also important. Let's review the positive and negative features of the product:

Advantages	Flaws
High maintainability.	The design is quite complex.
The ability to replace worn-out elements with new ones.	The need to constantly care for products.
A variety of design fantasies, unusual forms.	The average price is high.
The strength of the structure deserves special attention.	The weight is significant.
Ability to change performance.	It is difficult to find in free sale, as a limited number of copies are produced.
You can polish and paint the elements individually.

There is a category of motorists who purchase a special paste and polish the elements to such a state that they can be looked at like in a mirror. This procedure requires constancy, so after each vehicle wash, you have to start all over again.

Production material

For the production of a combined element, aluminum and steel are used. Steel, mainly mounted on special equipment and trucks. The components of light-alloy structures are made of aluminum, however, different technologies are used. As for the bar and rim, these parts are forged. In their manufacture, molding and pressing machines are used. They are among the strongest and most durable elements.

The ebb of the core is carried out in the matrix. With a strong impact, the central part of the element may receive mechanical damage, and the rim will remain intact. The damaged part is replaced with a new one, and you can continue the trip. Some popular models are made from combinations of carbon, titanium and steel parts. All elements are selected at the factory, so it is not recommended to change them yourself.

Criterias of choice

What to look for in order to avoid mistakes when choosing? The advice of professionals boils down to the following: you need to clearly know the necessary parameters.Light alloy and steel elements do not differ in size. But there are other technical characteristics that should be considered. Let's dwell on each in more detail:

1. ET. Departure of the element is an indicator that is responsible for the position of the wheel relative to the center of pressure of the suspension. There are three types: zero, negative and positive. Most stock cars have positive offset wheels.
2. DIA. Central hole. If it is less than set, then the disk cannot be mounted on the hub cylinder. With an increased size, it is possible to make adjustments by means of bushings (central rings).
3. Razboltovka. It tells how many bolts are used to fasten the wheel to the hub and shows the location of the mounting holes, as well as their diameter. So, on the VAZ - 2110, the parameters are 4 * 98, for SUVs 5 * 112.

With the wrong selection of structures, you can significantly degrade the performance of the vehicle. As a rule, prefabricated elements are not used for a budget-class car. They are not suitable for everyone in terms of cost, as manufacturers ask for at least 100,000 rubles per set for their quality goods. If you want to install combined wheels on your “iron horse”, you need to understand that you will not only have to shell out a significant amount of money, but also constantly take care of them, as well as carry out maintenance.

What are

In order to correctly determine which set of wheels is better to buy, you need to know what are the automotive prefabricated structures and what they are for, as well as their functionality. Let's dwell on this issue in more detail.

stamped

The most inexpensive, but heavy. The best for budget cars, so as not to overstate the cost.In the manufacture, rolling carbon ("black") steel and the stamping method are used, followed by joining by welding. At the end of the manufacturing process, the product is painted with enamel, which prevents negative consequences from an aggressive external environment.

Positive points:

• insignificant cost;
• ease of manufacture;
• sufficient strength;
• maintainability.

Negative points:

• significant weight, which leads to an increase in fuel consumption, a decrease in dynamics and controllability, and rapid wear of the elements of the chassis of the car;
• lack of choice in design;
• the need for regular painting;
• the use of plastic caps to improve the appearance;
• low corrosion resistance.

cast

They have the designation cast. They are considered the most common among drivers. Depending on where to buy products, you can become the owner of a cheap product from an unknown manufacturer, an expensive original, as well as a well-known brand. You can purchase products with an exclusive solution.

Products are produced from various aluminum alloys. In most cases, magnesium or titanium is used. It is made using the method of pouring the alloy into a certain shape. The next stage is cooling, after which it is removed from the mold and goes through a certain number of stages of machining. Leading manufacturers use innovative technologies such as injection molding. The process involves pouring molten aluminum into a mold and then applying a certain amount of pressure. The pressure promotes the formation of an integral fine-grained structure, making the product stronger and more durable.

The next manufacturing method is “flow forming”.It is based on mechanical rolling of the rim directly in a hot billet, which makes it possible to reduce the weight of the structure, increasing its strength.

Positive traits:

• significant strength;
• light weight;
• increases comfort;
• reduces the load on the suspension;
• available in a variety of colors.

Negative qualities:

• maintainability leaves much to be desired;
• rapid loss of appearance;
• the appearance of small mechanical damage.

What is the difference between stamped and cast options? The latter do not crumple, but immediately split. This may not happen immediately, but gradually, if you constantly drive on poor quality roads and receive a lot of minor bumps.

forged

The designation "forged" is applied to the model. They belong to the category of the lightest and most durable. As a rule, sports cars and mass-produced cars of considerable power are equipped with them. They are very popular among connoisseurs of the exclusive and tuned. The manufacturing process is as follows: first, a heated blank is stamped, which is then machined. Aluminum is often used as a material, less often other alloys.

A technology can be used, thanks to which a disc is cut from a blank using a special machine. Less durable products are obtained, but of an exclusive plan. This method is used when performing individual orders or unique design solutions.

The advantages of the product are:

• light weight;
• excellent strength;
• style.

The cons are the following:

• lack of variety of options;
• significant cost.

Composite (collapsible)

They are combined, have the designation 2 - piece or 3 - piece.A distinctive feature is the presence of a certain number of components. Used mainly for tuning. The hub and the central part are cast. Forging can be used to increase strength. The rarest type of discs, which is not intended for everyday use. Leading the ranking of quality products. Basically they play the role of an image element, they are made to order. For them, motorists are willing to lay out significant amounts.

The advantages include:

• strength of the forged rim;
• titanium bolts for fastening;
• stylish appearance;
• strength;
• ease;
• maintainability.

There are not many disadvantages, but they are worth paying attention to:

• not everyone can afford;
• there is a poor quality fake.

Other types of products

In specialized outlets, along with the above main types, you can find spoked wheels that are designed for retro cars and other unique wheeled vehicles. Implementers offer composite wheels that are equipped with supercars. They are made from carbon fiber and plastic. You can order custom - disks for an individual project.

Which company is better to purchase products depends on many factors, including human preferences. There are several options where to buy the product you like. Currently, a large number of branded stores for the sale of this type of product are open. If the variety of models is confusing, and you can’t figure out how to choose the right kit, you should contact your sales manager for help. He will acquaint you with the rating of the best manufacturers, with the available functions, and help determine the cost.

There is another way to purchase discs - order online in an online store. According to buyers, this is not the best option. Even if you read positive reviews, there is no guarantee that a low-quality fake will not come.

Rating of the best prefabricated wheels for 2022

The most inexpensive

MKW MK – F 34 LM S 9*20

The assembly model is made of light alloy. Rim width - 8.5 / 9 / 9.5, rim diameter - 20/22. Mounting holes - 5/6 pieces. Departure indicator - from 12 to 55 mm. It is very popular among motorists.

The average cost is 7800 rubles.

• high build quality;
• reliability;
• acceptable price;
• long service life;
• sold in all outlets.

• not identified.

Wheel disk 7.0 – 15 D 345

The sphere of use of R15 discs is trailers and semi-trailers. Made from high quality steel. Weigh 20 kg. Suitable for all wheels. Withstand a load of 2500 kg.

How much does the product cost? You can buy at a price of 5750 rubles per unit.

• universal;
• quality;
• reliable;
• durable;
• practical;
• maintainability;
• The optimum ratio of price and quality.

• not installed.

Products of the middle price segment

Schmidt VN-Line

The prefabricated structure made of light alloy is well-deservedly popular among motorists. The presence of five mounting holes make the model reliable and safe. Rim diameter and width - 18 x 8.5 inches, offset - 45 mm, drilling - 5 * 112.

You can buy goods at a price of 11061 rubles.

• build quality;
• operational period;
• the possibility of self-repair;
• value for money;
• reliability;
• practicality;
• design.

• not installed.

Mi-Tech MK-F-34

A prefabricated structure can be purchased in specialized stores, or you can make an application in the online store. In most cases, sellers put up a set of four units, for which you will have to pay 29,160 rubles. It is rare to find piece trade in this product. Characteristics: rim with a diameter of 20 inches and a width of 9 inches, offset - 35 mm, mounting holes - 5 pieces. Made using light alloy.

• light weight;
• strength;
• reliability;
• operational period;
• maintainability;
• successful design;
• optimal combination of price and quality.

• it is impossible to buy a product in one copy.

Schmidt SS-Line

The manufacturer produces a design of decent quality and at an affordable price. Made from light alloy. There are 5 or 6 mounting holes, depending on the width of the rim. The material of manufacture is light alloy, which is distinguished by its quality and reliability.

The price of products is 11772 rubles.

• safety;
• the weight;
• self-repair;
• does not require constant care;
• operational period.

• missing.

Premium product

OZ Racing Botticelli III

Products in black with a matte finish are of high quality and interesting appearance. Made from light alloy. Mounting holes - 5 pieces, rim parameters - 9 * 21 inches. Departure indicator - 55 mm. Made by forging, which makes it reliable and durable.

The average price is 100430 rubles.

• design;
• practicality;
• operational period;
• safety;
• universality;
• functionality;
• quality;
• reliability of a paint and varnish covering;
• maintainability.

• missing.

Conclusion

It is quite difficult not to make a mistake in choosing disks. The correct choice is influenced by certain factors, such as the condition of the road surface, the intensity of use, the type and weight of the car, the design features of the car, the climatic conditions of the region of residence, and so on. It will be much easier to listen to the recommendations of car manufacturers. You can buy products in the online store, but it is not uncommon to get cheap fakes instead of products from leading world brands. Therefore, experts advise visiting specialized outlets where certified goods are sold.

Of great importance is which company was engaged in the release and how much it worries about the quality of its products and its image. Models of German, Japanese and South Korean production are getting a lot of attention. They use high quality material and innovative technology, and test designs for safety and reliability. Russian-made goods also enjoy well-deserved popularity if firms have been on this market for a long time and there are no complaints about their product.