Rating of the best manufacturers of brake discs for 2022

Savings when buying such an important part as a brake disc can have a bad effect on the movement of the car, safety for both the driver and the companion sitting next to him. Brake discs must be selected carefully, because the car market is flooded with metal products from various manufacturers, which do not always correspond to high quality.

How to choose brake discs

Motorists, mostly beginners who have recently begun to understand the structure of transport, face the difficult task of selecting brake discs.In order to avoid a mistake when purchasing, choosing an impeccable set of parts that is suitable for quality and capabilities, we suggest using some subtleties and tips:

1. Study the service book of your car in detail. Read the paragraph on the types of braking system in more detail. A distinctive feature lies in the drive: many passenger cars are equipped with hydraulic control, while trucks and SUVs are equipped and equipped with pneumatics or a mixed control system. The hydraulics are quite efficient, but it is the pneumatic drive that creates the easiest braking.
2. Be sure to take into account the design features. Manufacturers of parts and components for vehicles are reaching the level of production, when it is possible to allow various experiments with the replacement of the design, cheaper materials, and changes in manufacturing technology. The most predictable are standard discs, balanced and highly resistant to damage at maximum temperature. In the near future, ventilated discs will become especially popular, they are more suitable for driving on city roads. The unusual configuration will contribute to instant cooling, which is very good when slowing down and changing speeds.
3. Before installation, decide on the desired circle suitable for your vehicle. The wider the disc gauge, the larger the size of the pads included in the kit, thereby increasing the stopping effect.
4. The presence of perforation has an absolutely favorable effect on the gas cushion that appears during friction of the pads and disc. The perforation plane will help get rid of excess moisture.
5. The existence of grooves - radial notches, with the help of which the working surface on the brake discs is cleaned of small dust particles and adhering debris that enters as a result of the movement of the car. They provide uniform wear during use.
6. The anti-corrosion coating is a great advantage, providing protection against corrosion, rust and contamination. There are many varieties of anti-corrosion agents used, which also significantly affect the choice.

Rating of the best manufacturers of brake discs for 2022

Budget and quality

Nipparts

Dutch company for the production of high-quality spare parts for European cars, supplying the largest part of the European markets, trading in parts that comply with TUV and ECE R90 certification documents. The company has significantly expanded its range and has more than 16 thousand items, suitable for numerous Asian brands. The strictest selection, regulation, numerous checks and diagnostics of work performance helped to significantly reduce the number of defective parts.

Brake elements produced by Nipparts are also in demand among Russian drivers.

Price: 4700 rubles/pair

• a good ratio of price and quality of products;
• characterized by a long service life;
• provide the necessary timely braking, so important for any vehicle and traffic safety.

• not detected.

Avantech

Spare parts produced in factories by South Korean manufacturers are sold in secondary markets and delivered to the conveyors of the famous automotive giants Kia and Hyundai. This is already a guarantee of quality.

A distinctive feature - the price is twice lower than similar products of competitors. Brake discs of the Avantech brand are frequently tested, meeting all the requirements of customers, giving one hundred percent confidence in the quality and safety level. This is a fact confirmed by long-term interaction with the famous Mitsubishi Motors, testing in competitions on difficult racing tracks with obstacles.

Discs are made of heavy-duty cast iron steel with carbon additives, treated with special. dye, which serves as a reliable protection against damage.

Cost: 1900 rubles / pair

• heavy-duty cast iron steel with carbon additives;
• Stop and Go technology is used, which guarantees a strong grip of the pads with a minimum lapping time;
• the brake discs produce silent rotation and vibration, which is a huge plus, adding to the brand's popularity.

• not detected.

Bosch

A German company producing building materials and household appliances produces high-quality auto parts. Bosch devotes a huge part of its time to testing manufactured parts, testing and testing any unit made.

The German company sells not only at retail, but is also a partner of the world's largest concerns: Nissan, Kia (Optima and Rio models), Hyundai (Solaris and Elantra), Renault Logan "," Skoda Octavia ".

Cost: 1100 rubles / pair.

• low price;
• great for moving around city streets;
• the model was created for European and Asian cars;
• cooperation with world car manufacturers;
• components are of sufficient level and in good quality.

• emergency stop badly affects the performance of disks.

Nibk

A fairly new Japanese corporation on the market, which began operations in 1998, is part of the well-known concern JNBK Corporation, which specializes in the production of brake parts. The holding manufactures spare parts not only in Japan, but also has centers around the world. The number of partner countries is very large, the partners are: Russia, America, Europe.

Often, Nibk discs are found on the Solaris model, and on Russian brands, this is Grant or Priora. Complementary user reviews speak of the quality, low price of Japanese-made spare parts. You can't expect anything else from a company that is in the top ten of the best parts in this production.

Cost: 2900 rubles/pair.

• a built-in scheme of centers - intermediaries (regarding Russian cities);
• worthy high quality;
• democratic pricing (with some exceptions);
• compatible with all car brands.

• missing.

Ferodo

Brake discs from the British company Federal Mogul covered 95% of the entire European market for the production of auto parts. Employees are engaged in the production of exclusively automotive braking systems with the appropriate quality, which is in the first place in the manufacturer's priority.

Everyone knows the difficulty with the clunky, crude brake found on sports cars, luxury cars made of light alloy. The company coped well with the task, brilliantly solved this problem, surprised by the development of a series of anti-corrosion discs COAT +.

A great company known for their perfect products also stands out for their worthy price offers.

Cost: 2200 rubles / pair.

• practical price category with a fairly high quality factor;
• are widely represented on the market.

• not available.

Top of the best mid-range brake discs

This section of the rating presents the best brake discs that combine excellent performance and affordable prices.

BLUE PRINT

The company produces a wide variety of car parts. Parts of this brand are primarily characterized by reliability, high quality and affordable cost. Such results were achieved due to the fact that most of the production is in Japan. All parts are manufactured using new technologies. At each stage of production, the parts are under strict control, so they always meet the highest requirements in all respects.

With brake discs from Blue Print, driving is safe and comfortable. In their production, only high-quality steel and modern technologies are used, the perforation features of these discs make it possible to increase the coefficient of adhesion, and, accordingly, reduce the braking distance even in emergency situations.

Cost: 4200 rubles / pair.

• high-quality steel and modern technologies;
• lack of vibration and extraneous noise when braking.

• not available.

MASUMA

The production of auto parts of the Japanese brand Masuma has been established in many countries of the world. Their factories are located in Japan, China, Taiwan and Korea. The parts of this manufacturer are characterized by an excellent ratio of high quality and low cost. Automotive alliances such as Nissan, Toyota, Honda and many others have been cooperating with the company for many years. A well-coordinated production process using modern technologies allows the company to reduce the size of illiquid assets to 0.6%.This is the best indicator in terms of the number of defective products.

In Russia, the brake discs of this brand have gained immense popularity due to the low cost and high reliability of the product. Their price is significantly different from the price tag for factory originals. However, this also increases the chance of acquiring a fake. To avoid this, you need to choose your supplier carefully.

Cost: 4800 rubles / pair.

• Production using modern technologies;
• discs are made only from high quality material.

• not available.

SCHNEIDER

Brake discs from a German manufacturer are great for driving in extreme conditions. The design features of the spare parts make it possible to reduce the braking distance, reduce the effect of temperature changes, and also remove air from the friction zone of the pads on the disc.

Durable discs pair well with Ferodo brake pads, as they also offer increased wear resistance and long life. Moreover, excellent performance is maintained even with rough extreme driving. However, pads of other brands will also work here. The main thing is that they are sharpened specifically for extreme driving, since with this type of driving, a huge share of the load falls on the pads. The disks of the German manufacturer have a straight rib structure, through which a large air flow passes, thanks to which the disks are perfectly cooled.

Cost: 3600 rubles / pair.

• suitable for extreme driving;
• excellent cooling, thanks to a combination of perforation and ventilation;
• affordable price.

• wheels are more suitable for racing.

LUCAS (TRW)

Once it was a separate company, today it is part of the huge TRW corporation. Auto parts are produced here exclusively for brake systems. Most of the products are supplied to the secondary market, but a small proportion of products still go to the VAG conveyor.

The brake discs of this brand differ from others in black, and this coating saves the user from lubricating the surfaces, as well as from applying a special composition against metal corrosion to the discs. The range also includes models with increased thermal conductivity. These discs are very light, provide short braking distances and increased wear resistance.

Cost: 3000 rubles / pair.

• rich assortment;
• black coating;
• a large share of products is shipped to the secondary market.

• low operational capacity of disks.

BREMBO

Italian parts from Brembo have gained immense popularity in the Russian market. Moreover, users fell in love with the brake discs of this manufacturer. They are great for VAZ cars. But drivers prefer to take pads from NIBK. Auto parts manufacturer Brembo boasts a combination of high quality products and affordable prices. The latest implemented technologies have made it possible to increase the wear resistance of working surfaces and, accordingly, increase the service life.

The company produces not only standard brake discs, but also parts for sports models. After their successful testing and application on sports cars, they enter the mass market.

Cost: 3700 rubles / pair.

• constant development of new technologies;
• wide model range;
• the presence of sports brake discs.

• was not found.

Top Best Premium Brake Discs

This section of the rating contains expensive brands of brake discs, the cost of which is fully justified by the highest quality.

FREMAX

The Brazilian brand produces some of the best auto parts in the entire global market. The well-known company Mitsubishi cooperates with the company on a permanent basis. Fremax is the official partner of the most popular racing events in Brazil. The manufacturer manufactures high-quality parts for the brake systems of cars. Their safety, reliability and durability are due to the company's huge contribution to the development of new technologies, as well as full control of all stages of spare parts manufacturing.

The manufacturer has created special packaging made of durable plastic for brake discs, so there is no danger of damage to the parts during transportation. Moreover, thanks to the introduction of Ready To Go technology, auto parts do not need to be degreased - they are already ready for installation. Undoubtedly, brake discs from Fremax are one of the best options for the braking system of any car. All products of this manufacturer are characterized by safety, reliability and durability.

Cost: 5000 rubles / pair.

• Ready To Go technology;
• auto parts do not need to be degreased, they are already ready for installation.

• not detected.

DBA

The brake discs of this manufacturer did not take the first place in the ranking only because their price is too high even for elite parts.Luxurious parts are suitable for the brake system of any modern car. The company introduces the latest technologies in the production of discs, thanks to which the products boast ideal characteristics. One of the most powerful DBA technologies is Kangaroo Paw, with the help of which the disks are effectively cooled, due to which their service life is significantly increased.

The parts are perfect for extreme driving. Moreover, the discs will wear out evenly after a rough ride, since there are perforations and notches on their surface. The T-Slotted system is also used in their production. Everything contributes to the excellent grip of the discs and effective braking even if the car is driving in water.

Cost: 8090 rubles / set.

• effective cooling of disks, thanks to the Kangaroo Paw system;
• the manufacturer has an impeccable reputation and produces high quality products.

• not detected.

ATE

The company is part of the huge corporation Continental Automotive Systems and is engaged in the production of auto parts only for brake systems. Thanks to its narrow specialization, the manufacturer successfully cooperates with a huge number of car brands. Parts are supplied to the conveyor of such well-known concerns as Audi, BMW, Ford, Skoda, Toyota.

The main pride of the ATE brand is the tuned brake discs. They can withstand temperatures up to 800 degrees. The manufacturer managed to achieve such results due to the special design of the disks. There are special grooves and grooves on their surface, with the help of which gases and water are effectively removed from the working surface, and all brake units are cooled.

Cost: 4900 rubles / pair.

• cooperation with many car brands;
• supply of parts not only to the conveyor, but also to the secondary market;
• short braking distance and high wear resistance.

• not detected.

OTTO ZIMMERMANN

The German company began manufacturing auto parts back in 1947. Already at that time, she became famous for her high-quality products. However, despite the fact that the spare parts belong to the luxury class, the price for them is significantly lower than that of competitors in the same segment. The company is not distinguished by conservatism, so new technologies are regularly introduced into production. One striking example of this is the Sport brake disc series. More than 500 models are presented in this line, and all of them differ from each other, thanks to modernization. Brake discs from this series are designed for extreme driving.

Most often, disc brakes of this brand can be found on cars of brands such as Opel or Volkswagen, as well as on Porsche supercars.

Cost: 4500 rubles / pair.

• huge model range;
• a wide range of prices;
• fairly large market coverage.

• not detected.

EBC

Auto parts from EBU have a rather high cost, but it is fully justified by the quality, safety and durability of products. Thanks to their excellent performance, the discs have gained immense popularity among fans of "drive". Sports car owners also prefer parts from EBC for the brake system. For them, the company has developed a whole series - Ultimax. For normal high-speed driving on the track, wheels from a simpler series - Turbgroove are suitable.Usually they are installed on cars with increased dynamics, for example, Honda, Infiniti, Subaru and others.

Alternative auto parts for luxury cars can be parts from the Premium series. Their quality is beyond doubt. And the high cost is fully justified. Premium class brake discs have never caused any complaints. Although they are in demand among very influential and demanding buyers.

Cost: 10,000 rubles/pair.

• safety;
• durability;
• product reliability.

• not detected.

The rating included brands that produce the highest quality and most reliable brake discs. The assessment was influenced not only by consumer reviews, but also by the characteristics declared by the manufacturer, as well as the opinion of car service specialists.