Rating of the best manufacturers of ceramic tiles for 2022

When arranging some rooms, it is recommended to use a certain category of materials, which, in addition to a high aesthetic appearance, are practical and can be subjected to frequent cleaning. An example is the bathroom and kitchen, which are washed and cleaned several times a week. Such selection criteria are met by high-quality ceramic tiles. After years of use, the cladding will not lose its attractiveness, provided that not only a competent approach to the choice of coating is carried out, but also proper care is observed.

Basic parameters and classification

Before you start choosing such a popular finishing material, you should understand not only its purpose, but also its varieties. First of all, you should pay attention to its categories:

1. For outdoor work. It is used for facing apartments, houses, warehouses, garages and utility rooms (unheated). Also used for decorating pools.
2. For interior work. It is applied at registration of premises, facing of walls, floors and ceilings.

Based on the production methods, two types of ceramic coating are distinguished:

1. "BUT". Pressed. The resulting mixture (similar to a thick dough) is pressed through holes of a certain shape.
2. "AT". extruded. A powdered substance is used, for compaction of which a high pressure press is used.

Also among the numerous types, special attention should be paid to unglazed and glazed tiles. In the first case, we are talking about the most common product, which does not even have a picture. It is characterized by a high degree of homogeneity and practicality. Often used in construction.In the second case, the top layer is covered with a decorative layer based on colored glass. The degree of gloss at the surface is high, however, regular care is required for it. Glazed novelties are considered more resistant to mechanical stress and precipitation.

Before choosing a coating, you need to pay attention to the degree of its water absorption. This indicator is determined by the porosity of the coating. The lower the density, the more moisture it can absorb. According to buyers, for walls, the product should have a water absorption coefficient of no more than 25%, while for the floor this figure drops to 4.5%.

Features and basic characteristics

Decorative and mechanical properties of products are determined by the firing method. Not only the cost of the product, but also its practicality depends on the chosen manufacturing method. The principle of double firing implies the presence of primary heat treatment of raw materials, after which a decorative layer based on glaze is applied. Then it is re-baked. The resulting product becomes porous and brittle and therefore cannot be used as a floor covering. Used as wall decoration.

An important aspect is the wear resistance of ceramic products. For greater convenience, the best manufacturers provide indicators in the form of a comparative table, which, if necessary, can be compiled independently. There are several PEI groups:

1. First. A fragile item that should only be used for walls.
2. Second and third. An excellent choice for rooms where people often wear slippers (kitchens, bathrooms, hallways).
3. Fourth and fifth. The functionality of such a building material is extensive.Should be installed in high traffic areas. In addition to practicality, such tiles endure the impact of abrasives, chemicals, dirt, frost and other environmental factors.

Some collections from popular manufacturers are made under the tree. The cost of such coverage is high, but the quality is excellent. Characterized by complete versatility.

Surface care

Such a coating does not need special care and is unpretentious. The original appearance will remain throughout the entire operational period, which is extremely important for most buyers. Experts recommend wiping the surface daily with a soft cloth soaked in water. Abrasives and hard brushes are not recommended. The top layer may be damaged, which will lead to the destruction of the structure of the components.

The coating is laid even at the stage of construction of a building or structure. However, before proceeding with the indicated manipulations, it will not be superfluous to take care of laying communications in advance. Otherwise, you will have to rip off the products and complete the networks, which will lead to additional expenses.

The help of a consultant will not be superfluous

In order not to make mistakes when choosing a material, it will not be superfluous to consult with an experienced specialist. These can be found directly in the hardware store. It is the consultant who will help you choose the best model, taking into account the needs of the buyer. He will also talk about the advantages and disadvantages of the model he likes, pay attention to the features of caring for it. On light surfaces, pollution is too conspicuous. Bright colors can get boring, which should also be considered when choosing a coating for a bathroom or kitchen.

Benefits of ceramic coating

Such material has gained popularity and has become in demand largely due to its versatility.

Advantage	Description
Ease of maintenance	There is no need to use expensive or strong detergents for cleaning. Dirt and dust can be removed with a damp cloth.
Biological stability	The applied composition and structure of the product does not promote breeding on the surface and inside of insects, microorganisms and bacteria.
Frost resistance	When repairing facades, terraces, loggias, balconies and open-type gazebos, it is possible to use a ceramic coating that is not afraid of severe frosts.
Environmental friendliness	The material is completely harmless to both the environment and humans. The composition is dominated by natural components, such as metal oxides, feldspar, clay and sandy rocks.
Wear resistance / durability	The top (protective or decorative layer) will not collapse or wear off from regular friction and exposure to abrasive and chemical substances.
fire safety	Belongs to the category of non-combustible materials. In close proximity to fire and with significant heating, it does not emit toxic substances, does not break down and does not ignite.
Thermal conductivity	The material heats up quickly, due to which the product can be used in home improvement using smart home technology (warm floors).
Antistatic	Due to the applied chemical composition and porous structure, there is no accumulation of electric charges. It does not serve as a conductor when dry.
moisture resistance	The product does not absorb moisture and does not allow it to penetrate deep into structures. Regular exposure to moisture on the coating will in no way harm the latter.

Rating of popular models of inexpensive ceramic tiles

Azori

This Russian manufacturer has an excellent reputation in the market. Production is established in St. Petersburg. It is in high demand due to its unusual design that fits perfectly into any environment and makes the room really cozy. On the market for 10 years, but exports to many European countries. It is rightfully included in the TOP of the most popular domestic products. Trusted by international experts. If necessary, you can order products in the online store. It is characterized by the presence of high performance, ease of installation, reasonable cost and modern appearance. It should be noted that the product packaging is mediocre, due to which the top layer often comes scratched. Size: 33.3x33.3 cm or 42x42 cm.

Price - 650 - 1200 rubles. per m2.

• dimensions are always accurate;
• acceptable cost;
• modern appearance;
• variety of collections.

• third grade packaging.

Ceramiche Grazia Vecchie Majoliche

The product of this manufacturer is available in four colors. Will be a great addition to any decor and mosaics. Products belong to the budget segment based on the cost. Product of the Italian concern. In the manufacturing process, modern approaches are used that have brought their facing materials to a new level. Such a product will perfectly fit into any interior. It is characterized by a variety of shades, lightness of motifs, freshness, elegance and exclusivity.

Italian quality will make any environment cozy and unusual. Majolica stylization will make it possible to equip any corner of the house.

The average price per unit is 800 rubles.

• ease of installation;
• durability;
• unusual design;
• lack of discrepancy in shades;
• an abundance of colors;
• quality;
• universality;
• originality of design.

• you can buy only on order;
• Warranty is provided by the factory only.

UNITILE ("SHAKHTINSKAYA TILE")

High-quality budget collection from a Russian manufacturer. It should be noted that Spanish and Italian developments are used in the design of the product. The raw materials used are Russian, but the glaze and dyes are imported. To date, there are over 25 collections of various subjects. Is issued in different color schemes. The sizes of products vary: from 33x33 cm to 60x60 cm. If necessary, the model range you like can be ordered online, directly from the manufacturer's website. It is such a firm that it is better to buy tiles for those who do not seek to go broke on the next repair.

You can buy at a price of 450 rubles. per sq.m.

• acceptable cost;
• ease of installation;
• color schemes for every taste.

• deviations in dimensions;
• fragility;
• marriage.

CERSANIT

The product of a European manufacturer, which holds a huge number of factories, including in Russia. It is such a product that you should buy if you plan to make high-quality repairs for little money, which would last for a dozen years. In addition to budget products, the concern also offers high-quality premium coatings. A feature of the choice in favor of CERSANIT is that the manufacturer offers a product not only in a popular size, but also one that is rarely found in the premium segment.Available in this size:

1. 20x30 cm.
2. 20x44 cm.
3. 20x60 cm.
4. 25x35 cm.

Price - 550 rubles. per m2.

• wear resistance;
• strength;
• exclusive design;
• universality;
• acceptable cost;
• colors;
• dimensions.

• a batch with a deviation in size is not uncommon;
• the glaze is incredibly fragile;
• competitors cost less.

GOLDEN TILE

When choosing a cladding, you should pay attention to the products of the Ukrainian manufacturer. The products of the Kharkov tile plant, which works according to Italian technology, can easily cope with the indicated functions. Design and developments are also taken from Italy, production equipment is imported. We are talking about digital printing, which is gaining popularity in Europe. Thus, it is possible to obtain a high-quality product of collections of any segment. It should be noted that the company has over 50 different areas of ceramic coating.

Dimensions:

1. 15x60 cm.
2. 20x30 cm.
3. 25x40 cm.
4. 30x30 cm.
5. 30x60 cm.
6. 40x40 cm.

It belongs to the middle and budget price segment. They have their own resource base. It is worth noting the presence of high-quality equipment, which guarantees the production of goods of acceptable quality. Marriage at the firm is extremely rare.

The average cost per m2 is 700 rubles.

• variety of design solutions;
• many collections;
• color spectrum;
• range of finished products;
• product quality.

• slight discrepancies in color and size.

KERAMA MARAZZI

Domestic brand that offers products of the middle and budget segment. The assortment consists of more than 10 collections, including thousands of items.A review of the design and color scheme led to the conclusion that designers and marketers use geographical principles when creating lines. So, experts advise to pay attention to such collections:

1. Scandinavian.
2. Indian.
3. Italian.
4. English.
5. French.

Such a choice will allow you to choose the finishing material for any room. There is no doubt about the quality of the proposed product. In the manufacturing process, the latest developments and technologies of the dry method of pressing raw materials are used. Thanks to this, it is possible to imitate surfaces of any type. Based on the price-quality ratio, the product of this brand is one of the best on the market today. If necessary, you can install the appropriate application from the market on your smartphone and get acquainted with the brand's products without leaving your home.

Price - 650 rubles.

• comfortable customer service;
• delivery to any region of the country;
• strength;
• modern design;
• variety of colors;
• acceptable cost;
• dimensions.

• it is difficult to pick up the style (walls / floor) for one room.

Rating of popular models of ceramic tiles in the middle price segment

Keramin

A quality product from the Belarusian concern, which provides products of various textures to the domestic market. An excellent finishing material that can decorate any type of room. The surface is embossed and glossy. It is able to unusually display light rays, which gives the room a feeling of freshness and cleanliness. Individual elements fit easily into joints of any diameter. An affordable line that will allow you to update the interior at a reasonable price.

How much does the product cost? About 3500 rubles.

• acceptable cost;
• ease of installation;
• lays down well;
• washes well;
• range;
• modern design;
• strength;
• the possibility of implementing your own design solutions;
• excellent cut;
• calm tones;
• durability.

• in one batch there may be a mismatch of tones;
• matte options do not wash well (stains remain);
• additional time to prepare the material;
• geometry inaccuracy.

LaFabbrica

The manufacturer is able to offer the domestic consumer not only a quality product of the middle price segment, but also a premium one. For many years, the brand has maintained its position as a leader among other concerns involved in the manufacture of ceramic coatings. The features of the product include a high rate of strength and wear resistance of the product. It is also necessary to pay attention to the optimal ratio of cost and quality of the products offered. A wide choice of color schemes and sophisticated design made it possible to make the brand a leader in its segment, and this is confirmed by numerous reviews of satisfied customers.

Cost - 4900 rubles.

• modern design;
• assortment and unusual design solutions;
• quality;
• texture;
• operational period.

• price.

FAP CERAMIC

One of the best manufacturers of ceramic products in the middle price segment, whose product can rightfully be considered a premium product. Italian specialists are engaged in key developments. Over 30 different collections are offered to the consumer's choice, which will satisfy the needs of even the most subtle connoisseur of beauty. The main plant is located in Sassuolo.The products are characterized by exclusive design, environmental friendliness of the raw materials used and increased durability. A ruler that imitates natural surfaces enjoys considerable interest. What are:

1. Under marble.
2. Under natural stone.
3. Under expensive breeds of wood.

Approximate cost - 3900 rubles.

• coating durability;
• stable quality;
• environmental friendliness;
• range;
• design.

• the dimensions are not the same, which is reflected in the subsequent installation;
• price.

GRAZIA Venice

Another brand comes from Italy. It is in demand among connoisseurs of vintage style. It is used by eminent designers to create unique, memorable and exclusive bathroom interiors. Separate rulers can be used to decorate rooms such as hallways and corridors. To create a unified style in the interior, the manufacturer has provided a number of auxiliary elements, including:

1. Borders.
2. corners.
3. Plinth.

Designer variety and a wide selection of colors are missing here. Competitors have a much wider choice. The dimensions and quality of the tiles comply with European standards.

For a square meter of tiles, the buyer will have to pay about 4,500 rubles.

• practicality;
• durability;
• aesthetics;
• exclusivity;
• additional accessories.

• price;
• lack of assortment

GRAZIA Vecchie Maioliche

Affordable cost and high quality are the two main factors that you should pay attention to when choosing a manufacturer of ceramic tiles. This Italian manufacturer adheres to these rules.It should be noted the use of innovative technologies, high-quality raw materials and expensive equipment. This allowed us to offer the modern consumer not only a quality product in an elegant style, but also complete exclusivity and conciseness.

The cost per square meter is 4900 rubles.

• durability;
• strength;
• application of the latest production technologies;
• universality;
• quality.

• price;
• the complexity of the acquisition (online order and long delivery).

Rating of premium quality ceramic tiles

EQUIPE Rhombus

The famous brand comes from Spain. Successfully entered the market in 1999 and to this day is a confident leader in several positions. The company was originally engaged in the production of various decorative elements, but since 2005 it has actively launched the production of ceramic tiles (small format). Cover dimensions - 24x14 cm. With it, you can decorate not only wall, but also floor surfaces outside and inside. With the help of such high-quality tiles, buyers decorate outdoor areas and adjacent plots. The top layer is anti-slip, so the product has become a popular solution for decorating not only kitchens and toilets, but also bathrooms. The brand is the undisputed leader in the production of tiles (small format).

The average cost is 11,000 rubles.

• operational period;
• quality;
• originality;
• color variations.

• small assortment.

GRAZIA Venice LX

The best tiles are Italian and this brand is no exception.In 2014, when the annual exhibition was held in Bologna, the product of this manufacturer caused a sensation. The coating is used for arranging bathrooms. Separate designs can become an excellent design solution for the design of dressing rooms, platforms and corridors.

In addition to tiles measuring 80x40 cm, the brand also offers auxiliary decorative elements, including skirting boards, corners and borders. With their help, it will be possible to make the appearance of the premises concise and complete. Diversity is no different. Conquers, first of all, with color solutions, high wear resistance, quality and full compliance with existing European standards.

The average price per square meter is 7500 rubles.

• versatility of application;
• durability;
• strength;
• quality;
• stained glass style.

• lack of range.

GRAZIA Vecchie Majoliche

Unique decorative finishing material from the Italian brand. It is the embodiment of an innovative approach and a number of exclusive solutions. A high-quality product that is supplied to the territory of our country by three dealers at the same time. Ceramics of Italian quality is able to fit into any, without exception, the interior of the house, trading floor or premises of a different type. According to experts, the variety of shades offered, the airiness and freshness of motifs, the elegance and conciseness of the ornament deserve special attention. It has a huge number of positive reviews both among ordinary consumers and among highly specialized specialists, as well as true connoisseurs of beauty. Everyone will be happy with such a purchase.

The price per unit of production will be 450-6500 rubles.

• quality;
• universality;
• original design;
• color solutions;
• innovative approach;
• operational period.

• price;
• acquisition difficulty.

Vallelunga Foussana

The best ceramic tiles are Italian. The collections of this brand enjoy well-deserved popularity not only in their homeland, but also in most European countries. Products are used for arranging premises of any type in:

1. Modern style.
2. Antique style.
3. Classic style.

During the manufacturing process, the facing material is subjected to several heat treatments. In addition to ceramic tiles, the manufacturer produces high-quality porcelain stoneware, decorated in a minimalist style. Products have gained considerable popularity largely due to sophistication, simplicity, elegance and beauty.

Price - 5500 rubles.

• strength;
• wear resistance;
• heat resistance;
• quality;
• durability;
• practicality;
• modern design.

• price.

LAMINAM Kanka

Premium segment products. A similar category of finishing materials is of interest to those people who can afford high-quality Italian cladding, the cost of one element of which will be at least 8 thousand rubles. The top layer imitates the surface of oxidized metal or natural stone. The structure of the material is such that it is capable of self-cleaning. It is characterized by the presence of excellent indicators of frost resistance, strength and excellent appearance.If the cost for the buyer does not matter, then just such ceramic tiles should be purchased for the arrangement of residential premises.

Cost - 8500 rubles.

• during use, the surface of the material is able to self-clean;
• frost resistance of the raw materials used;
• does not need special or expensive care;
• exclusive design;
• fast installation without any difficulties;
• strength;
• durability.

• price.

Conclusion

High-quality ceramic tiles are the brainchild of Greek and Etruscan potters. Today, such facing material is in no less demand than millennia ago. The use of high-quality raw materials and the latest equipment made it possible to make tiles:

• resistant to any mechanical damage;
• environmentally friendly facing material;
• strong enough;
• durable.

Such material can be used for both interior and exterior decoration. It is also used as a facing material in the arrangement of stoves and fireplaces. In addition to ease of subsequent care, it should be noted excellent frost resistance and the absence of any design restrictions. You should not save on facing material, because repairs are done for decades.