Rating of the best beret manufacturers for 2022

The name "tibia" originates from the term "tibia". This is the part of the leg that runs from the knee to the foot. This type of footwear began to be produced during the Second World War. Standard shoes, common in those years, did not hold the ankle, so the soldiers often got leg injuries. After the end of the war, the American army introduced berets into its equipment.

The brutal look of the berets is given by the material used for tailoring - rough leather. This type of footwear is high, due to which it covers almost the entire “tibia” part of the leg, acting as a retainer. This helps to avoid many major injuries: from dislocations to fractures.

The thickened sole and fur lining of some models make them suitable for winter use. And impregnation with a special composition and firmware on the edge of the diameter allow you to wear such shoes in slushy weather, without fear that they will get wet.

The material used in the manufacture

Bertsy have increased strength. In their manufacture, special technologies are used that adjust shoes to temperature conditions, kinks, dampness and slip. In addition, the manufacturing technology is built in such a way as to adjust the boot to the foot, saving energy on long hikes.

Such characteristics are achieved by using only natural materials in the production: natural leather, gore-tex or cordura, suede, nubuck. Sometimes cotton material is used. However, no substitutes are allowed.

The nubuck coating looks like suede, because. when using nubuck, a special treatment is applied. Water resistance is achieved by spraying the material with oil-containing substances. These berets are more expensive than ordinary leather ones.

Chrome leather has also become one of the most popular materials because differs in durability, moisture resistance and elasticity. Although this material is inferior to genuine leather in price and demand, however, the quality is no worse.

The inner part can be both hollow and equipped with a lining or insulation. The lining for summer models, as a rule, is a porous polyester mesh. This helps to lower the temperature in the shoe and rid the foot of excess moisture. Winter models have a lining with natural insulation, for example, fur.

The sole is made of rubber materials.Rivets and spikes located on it serve as a guarantee of wear resistance and durability. It is this part of the boots that is responsible for the service life and comfort when worn. The sole may vary:

• Soft. Used in summer models;
• Rigid. Ideal for cold periods as the main function is to keep warm and "repel" frost.

Due to the relief, the best hitch of the boots with the ground is carried out. The flat base is not produced. The sole makes up 70% of the total weight of the boots. It is impregnated and vulcanized, so it is not afraid of explosive substances and ignition.

What types of berets are used

Although the original purpose of the berets was a military theme, but now they have become widespread in other areas of life. Now there are models not only of the military type, but even for women and children. It is worth paying attention to the most popular types:

Military

Modern products are much better than those made in Soviet times. The leg is not pressed down due to the space that remains at the foot. There is also no friction in the toe and heel areas.

However, when using this type of shoe, it is worth considering some features:

• Sprain is minimized due to the fact that the height of the shoe fixes the ankle in such a way that the joint is immobilized.
• It is better to choose lace-up shoes, because. it uses high quality elastic laces;
• The sole is thickened, which helps to avoid unnecessary damage and moisture;
• Durability is the main advantage of army boots. They may lose their presentability, but despite this, they will serve for a very long time.

Thus, military-type berets have a number of advantages.

Sports

This type looks like sneakers, and is also called "Storm". The main specialization of such shoes is a mobile way of activity, which makes them suitable for tourism and hiking. It is for this reason that such berets have a ribbed sole and a slightly raised toe. Also, depreciation is higher than other types. Classic lacing contributes to a good fixation of shoes. Its weight is small, and its height is medium.

Women's

Now berets are also common among women. Moreover, this type of footwear is often used in fashion shows and sparkles on the pages of glossy magazines. The main feature of women's berets is that they are not so massive and heavy, so they go well with street clothing.

In addition, this type of shoe has some distinctive features:

• Variety of colors and designs;
• For tailoring, softer leather is used;
• Summer models are usually additionally decorated;
• Boots have a more refined shape and sit more pleasantly on the leg.

Standard color is black. However, models of various colors are now being actively produced. Budget brands use artificial insulation, so the price is correspondingly lower. These boots are often worn with jeans and trousers, and sometimes more surprising combinations with skirts and shorts are obtained.

How to care for berets

After buying, you should once again make sure that the shoes fit in size. If, nevertheless, it turned out that it squeezes the leg, then it is possible to stretch the berets by 1 size. To do this, you need medical alcohol, which needs to moisten the inside of the boot, and then quickly put it on your leg. Then you need to walk a little, and then remove and stuff with damp newsprint. Thus, they must stand throughout the night.Later you will notice significant changes.

You need to carry out a similar procedure every day before going to bed. The shoes will dry overnight and retain their shape. Before applying the cream, shoes need to be wiped with a damp sponge. The impregnation is distributed with a special brush or an ordinary toothbrush is used.

Lubricate with leather cream or glycerin, which can be found at any pharmacy.

In winter, it is better to coat the army type of boots with lamb fat. It helps retain heat and minimizes the entry of cold air into the shoes.

After walking in slushy weather, it is better to wipe the boots with a damp sponge, and then with a dry rag. Crumpled newspapers placed inside will help absorb excess moisture.

Vegetable oil will help give the surface of the shoe elasticity.

In order to avoid fungal diseases, it is highly recommended to treat the inside of the tibia with vinegar at least once a month. To get rid of the unpleasant odor, you should take them to fresh air for a couple of days.

How to choose

In order to make the right choice, you need to follow some tips:

• It is required to immediately decide in which field of activity berets will be involved, as well as in what weather;
• For activities in mountainous areas, it is better to choose studded shoes with a high tread, in addition, the spikes must be steel;
• If the shoes will be used in frosty weather, then it is better to opt for high soles with sheepskin insoles;
• In warm weather, lightweight models are perfect;
• The main specialization of chrome boots is informal meetings.

For more severe conditions, you should purchase options from well-known brands that specialize in durability.

• Proper care can significantly extend the life of any shoe.Before you go outside, you should lubricate the surface with wax or shoe polish, which has a water-repellent effect.
• The boot must fit perfectly, not compress anywhere and not leave extra space, otherwise the risk of injury increases;
• Proper lacing also plays a big role. It is best to lace in the standard way. This will help keep the shoes in the right position.

This set of rules will help not only make the right choice, but also increase the service life of any model.

The best beret manufacturers for 2022

Below are the most popular beret manufacturers in demand by consumers in 2022.

Dave Marshall

This brand represents truly domestic army products, high berets. The absence of imitations and pretentious inserts immediately catches the eye. The company's products are designed only for those who know a lot about the true purpose of this type of shoe. Boots are one of the most affordable in Russia in terms of price. Their price is an average of 1500 rubles. Various types of footwear are produced: summer, winter, demi-season, lightweight, etc.

The shoes are quite roomy inside, which is why they are suitable for men with unusually wide feet that do not fit in other models. However, the variety of sizes is very small: from 40 to 46. This significantly reduces the circle of customers, especially women. But sometimes you can find exceptional models from 35 to 47 sizes.

For such a price, you should not count on ideal quality. There are models that lose their aesthetics after several seasons of constant use, or even completely become unusable.But often buyers do not take berets with the expectation of a 10-year period. Usually the need to wear them arises only during hikes or long journeys.

• Low cost;
• Reasonably good quality;
• Versatile focus;
• The severity of style.

• Poor dimensional grid;
• Only male orientation;
• Insufficient service life.

Faraday

Faraday is a Russian company specializing in berets and work boots of excellent quality. On the official website there is an opportunity to find shoes of this direction for every taste. Also an extensive variety of seasonal boots. Particularly striking is the variety of size grid: from 33 to 46 sizes. This allows you to expand the customer base even to the children's category.

Although at the moment the company is not as famous as the rest, however, the product is in high demand on the market. The latest technologies and the latest standards are used for manufacturing, so the shoes always remain relevant. In addition, "Faraday" is classified even by the type of sole.

It is worth noting that the brand specializes in uniform berets. For officers / cadets / cadets such models will be very useful. This manufacturer creates the most practical and comfortable shoes, while meeting the individual needs of everyone. The Faraday company provides an opportunity for wholesale purchases, even though the price of its products is already quite low.

• Low cost of production;
• High quality;
• Huge variety of models;
• Extensive dimensional grid;
• Possibility of wholesale purchase.

• Brand unknown.

Garsing

Garsing is a Belarusian manufacturer of tactical equipment. All products of this company are tested in a variety of weather conditions, including extraordinary ones. The range consists of products for any climatic zone. The color changes from black to camouflage. Those. products are specialized.

The brand pleases with an affordable price and at the same time excellent quality. Leather models are especially famous. The soles are made of excellent material, which allows you to withstand temperature fluctuations from -40 to +40 degrees. Of course, in almost every model there is a "glass" that keeps the foot safe. Although the range of products is extensive, almost all of them are designed in the army style. However, this does not affect the style and comfort, so they look good in combination with casual style.

"Garsing" has an expanded size range. So, the maximum size reaches 50, and the minimum - 36. Basically, buyers are satisfied with the manufacturer, but you can often find complaints about poor-quality laces and insoles.

• Affordable price;
• Excellent quality;
• High quality outsole;
• Color variety.

• Only army orientation;
• Bad reviews about the quality of laces and insoles.

Magnum

Magnum differs from other brands in that it uses sports technologies in its development. But, despite this, the company specializes in goods specifically for the army and special services. It in absentia guarantees high quality and convenience of boots. For manufacturing, advanced technologies of moisture protection, protection against temperature fluctuations, protection against injuries, etc. are used.In addition, consumers note increased wearing comfort.

The range is huge, where not only the price changes, but also the color. Thus, everyone can choose a model for themselves. Most models are even suitable for wearing with a formal outfit.

• Low price;
• Extensive range;
• High quality;
• Application of original technologies.

• Only specialized products.

Steel

This brand is distinguished by the indestructibility of its shoes even during daily use under the most unexpected and unbearable conditions. Basically, the products are aimed at rockers and informal people living in different climatic zones, which also speaks of the brand's specialization in this area. Thus, you can find not only standard army boots, but also amazing creations with many plaques and studs.

For production, thick soles and cattle leather are used, so Steel products are able to withstand absolutely any test. The toes are protected by a steel glass, so they remain safe even if something very heavy falls on them.

The three-layer type of the sole makes it much more durable and reliable. The inner part is made taking into account all medical requirements, which emphasizes the seller's concern for the buyer. As a result, you can see the original shoes, which are of extraordinary quality.

• Focus on the most unusual categories of customers;
• Extraordinarily high quality;
• Big line of models.

• There are mainly rocker models.

The most demanded models of 2022 not included in the rating brands

Among the total mass of berets there are models that deserve special attention, although the manufacturers themselves do not specialize directly in such shoes. It:

1. Butex Cobra M12100;
2. BIZON (BISON) Duck U-12;
3. Tropic M016;
4. Ralf Ringer Weekend Hunter;
5. Omon M905.

Each presented model combines the best qualities and is durable when worn.