Rating of the best drywall profiles for 2022

A profile is a metal bar that creates a frame for drywall. It is used in every construction project, as it provides fixation of the latter. Without a profile, drywall will not hold upright and will fall.

Many varieties of these devices are produced - the buyer, faced with the choice of the mentioned fortification for the first time, may be confused and purchase either a low-quality product, or choose the wrong type. To address this issue, an overview of this category of building materials is presented below. The consumer will learn about the types of planks, their functionality, selection criteria and get acquainted with the rating of the best drywall profiles for 2022.

Types of profiles for GKL

Man is surrounded by buildings, and each of them uses different types of profiles. Fortifications differ in composition, place of use, design features and functionality. Such a variety allows you to firmly fix the GKL and level imperfections in any type of premises and buildings.

They are distinguished by composition:

• Aluminum - the durability of support for aluminum plasterboards is higher than that of the previous type due to the chemical composition of the metal;
• Steel - sold as raw steel products, and galvanized, that is, with a protective layer. Black steel is considered a classic option during the procurement of appropriate fixtures for a construction site.

Black steel fixtures are suitable for rooms without temperature fluctuations and high humidity, therefore they are of low quality. Aluminum and steel with a zinc film are more durable and are more often purchased for kitchens and bathrooms.

Types of profiles at the place of use:

• Guide (PN) - designed to align the walls and is installed along the boundaries of the room. The most common and sought after.
• Ceiling (PP or PNP) - profiles for drywall on the ceiling. They are smaller than wall ones, have a small section and stiffeners. They also create less load on the frame due to their low weight.
• Reinforced ceiling (UA) - it has increased corrosion resistance and density. It is used in rooms where the height differs from the standard.
• Wall or rack (PS) - a wall profile for drywall is inserted in place of interior partitions and other structures.
• Arched (PA) - the device is distinguished by numerous cuts created for better flexibility. Allows you to hold the frame of arches and other curved structures.
• Shadow - an additional strengthener of the frame, which allows you not to use the plinth when repairing the premises. This type of metal products creates a "floating effect" of the walls.
• Angular - another additional view, so it has no markings. Used to protect corners and looks like a plank bent 90 degrees.

Before choosing one or another type, the buyer must carefully examine the premises where the repair will take place. It's also a good idea to bring a floor plan of the room with you to the store for easier orientation as to which drywall profiles you'll need in the future.

Criterias of choice

Getting into a specialized store, the buyer usually makes mistakes when choosing, because he does not know how to choose a quality product. You can recognize a low-quality product even at the selection stage.

Quality criteria:

• Coating - galvanized structural elements are less prone to rust.
• Thickness - the thicker the thickness, the higher the strength. The minimum is 0.3 mm.
• Burrs - The presence of burrs indicates poor metal processing.
• Creases - it is worth inspecting the future drywall support tool, as during transportation it can be bent or badly scratched. The presence of small deformations will affect its functionality in the future.
• Without paint - it is recommended to purchase unpainted products, as they are cheaper. In addition, paint can hide microdamages.

Knowing the criteria for choosing high-quality goods in this category will allow the consumer to avoid the return of the product or its early breakdown.

Buying Tips

In addition to the selection criteria, there is something else that you should also pay attention to when buying metal fixtures.These are the tips of other buyers, namely the difficulties they encountered when buying and using drywall profiles.

Tips:

• The difference in marking - there is a Russian and European marking, therefore, before going to a hardware store, buyers are advised to study the information about a particular brand in order to understand what kind of marking they will meet.
• The presence of holes - perforations on metal strips greatly facilitate the use of products, as they eliminate the obligation to drill holes in those holes on their own.
• Damper tape - It is worth purchasing a damper tape. Drywall has poor sound insulation, so it can be strengthened with the mentioned tape.
• Without online - if the question “Where to buy” arises, you should give preference to building materials stores. Buying such a product through an online store can be risky, because sometimes the part is deformed during transportation, and the supplier does not always meet the buyer and compensate for the damage.

These recommendations, obtained on the basis of the experience of other buyers, will allow you to better prepare for the purchase of a device for fixing the GKL frame, avoid mistakes and make the purchase of goods as efficient as possible.

 Browse the best profiles for drywall

The ranking of high-quality drywall profiles for 2022 contains not only descriptions, characteristics, pros and cons of popular models, but also new products that have managed to prove themselves well among buyers. The review also presents places where you can purchase a particular product, and the price in accordance with the Yandex Market Internet site.

Aluminum

Arlight ARH-LINE-2448-2000ANOD

Arlight is a Russian company that specializes in LED lighting and ceiling repair materials. Distributed throughout the country, and has production points in Poland, Belgium and China.

The Arlight profile called "ARH-LINE-2448-2000ANOD" refers to ceiling fixtures. The surface is not painted. Length - 2 meters, height and width - 28 by 40 mm. The total mass of strengthening for GKL is about one and a half kilograms. The thickness complies with the norms - 0.6 mm. The metal bar is unpainted and has a natural gray color for metal.

For the price it is expensive, since the cost of one model is about 1,000-1,500 rubles. This is due to the popularity of the company and its demands on the quality of manufactured products.

• Trusted company;
• Long length;
• Quality aluminum;
• Minimum percentage of defective goods;
• Good thickness;
• Availability of delivery from the manufacturer.

• High price;
• No perforation.

GAH ALBERTS Mon

GAH ALBERTS is a supplier of metal building materials from Germany. It has several offices in Russia and Europe. The history of the brand began in 1852 in the area of ​​​​the city of Sauerland and continues to this day, but already around the world. The main guidelines of the company are environmental management, responsibility and reliability, which is why their products are in such great demand.

The rack profile of the German brand has the following parameters: length - 10 m, width - 15 mm, and the thickness reaches impressive values ​​\u200b\u200b- 1 mm, while competitors produce profiles from 0.5 to 0.8 mm.The appearance of the model is standard - outwardly it is no different from the average bar. The bulk of production is aimed at Europe, so the manufacturer always maintains a high level of quality.

Enhanced performance and low price quickly won the attention of buyers and made the model in demand. The price of one copy is about 600 rubles.

• Increased performance;
• European quality;
• brand prevalence;
• Affordable price.

Ned

• Mostly online orders.

Optima PP

Optima is a Russian construction company, and one of its directions is the production of metal reinforcements for gypsum boards. It has many subsidiaries of the same name, but only it produces such hardeners.

The specified model of fixtures for drywall constructions refers to the ceiling. It has a galvanized surface, which is rare for aluminum products in this category. Product parameters - 60x27 mm, and length - 3 meters. It has a light weight due to the characteristics of the material and has a metal thickness of 0.4 mm.

The average price is 140 rubles, so this representative of the best fortifications belongs to budget goods. There are 12 pieces in one package.

• Galvanized surface;
• Availability;
• A light weight;
• The number of strips in the package;
• Low price category.

• Small thickness;
• No holes.

Steel

Gyproc Standard

Gyproc is second in positive reviews after Knauf.Basically, the domestic manufacturer creates gypsum boards for interior decoration, however, the production of profiles for plasterboard has also become one of the directions of this brand.

The standard Gyproc model is a type designed to mask the unevenness of the walls, that is, a rack. It has the following characteristics - 50 × 50 mm, length is 3 m. Manufacturing method - cold roller with the addition of galvanized coating, which protects metal parts from corrosion and premature wear. The thickness is 0.6 mm.

Gyproc Standard is sold as a set, in which there are 144 pieces, and one copy, whose price ranges from 480 to 600 rubles. The Gyproc company is known in Russia and therefore buyers will not have problems finding its products in hardware stores.

• Widespread;
• The presence of a set of 144 pieces;
• Thickness;
• Galvanized surface;
• The manufacturer does not paint products.

• Price instability;
• No holes.

Knauf PN 100/40

Knauf is a giant in the construction industry. Knauf began his activity in 1930 in Germany and worked only with plaster, wanting to optimize the construction process. Over time, the brand captured user markets with the quality of its products and expanded its production to the maximum. In the catalog of the company you can find absolutely all the tools and materials for repair and construction.

Knauf PN 100/40 - rack type of fortifications. It has the following parameters - 100x40 mm and a length of 3 meters. The steel is galvanized and made by cold rolling, due to which the strength of the product is 20% higher than the classic one.Holes are made throughout the fixture for easier connection with other planks.

According to consumers, the rack profile marked 100/40 became the best steel fixture for gypsum boards. You can buy it on the official Knauf website or in any of the hardware stores. Sold in a set of 8 pieces worth 500-600 rubles.

Also, buyers noted the safe delivery of devices.

• European quality;
• Zinc coating;
• Increased strength;
• The prevalence of the firm;
• Safe delivery;
• Presence of perforation.

• Sometimes interruptions in delivery due to the popularity of the brand.

KM Standard PP

KM Standard is a Russian organization engaged in the wholesale of building resources, which include metal fixtures for gypsum boards. It is not very well known, but in recent years it has been gradually gaining popularity due to the regular supply of steel profiles of all kinds. The delivery area is all of Russia, and it is best to look for KM Standard reinforcements in online stores, for example, in Yandex.Market.

The "Standard" model is a galvanized ceiling strip. Dimensions - 27x28 mm and 3 meters long. The standard thickness is 0.5 mm. The bar was made by a special hardening method, which is also called "cold rolling". Has a pure silver color.

It is recommended to purchase at the mentioned online store from Yandex and focus on a small price - 140 rubles per copy. It comes in a set, in which there are 12 pieces, that is, the buyer will give about 1,680 rubles for a set.

• Convenient delivery;
• Corrosion protection;
• Extra strength;
• Low cost;
• A light weight.

• It is mainly supplied through online stores.

KM Standard PS 75/50

Another representative of KM Standard, who has won the trust of buyers who are starting repairs or professionally involved in the construction business. This model belongs to rack profiles and differs from the previous one in large dimensions - 75x50 mm, length 3 m. The rest of the characteristics are the same: galvanized steel of increased hardness, thickness - half a centimeter and is sold on Yandex.Market in the same quantity.

Due to the larger size, the price of the product is increased in comparison with the previous rating position. One plank costs - 260 rubles. The set will cost - 3120 rubles.

• Density;
• Convenient dimensions;
• Reliability;
• Galvanized surface;
• Affordable cost.

• Purchase only through delivery.

All over the world, different types and models of planks for construction work are produced. To select them, you do not need to know much - quality criteria, the required size, markings and a few tips, however, some of the representatives of this group of items are considered the best due to the quality that surpasses all other models. According to buyers, the best manufacturers of drywall profiles are Knauf and Gypoc.

Conclusion

Thus, having listed the best models according to consumer reviews from Russian and foreign manufacturers, we conclude that the most popular are ceiling and rack profiles that are large, have a metal thickness of at least 0.5 mm and an unpainted surface.The presence or absence of perforations, as well as the inability to look at the product live before ordering, does not play a decisive role, and consumers agree to purchase fixtures without holes. The name of the manufacturer, his experience in the production of metal reinforcements or growing popularity also plays a big role.