In the autumn-winter period, great importance is given to the issue of heating. Speaking of residential buildings or buildings for administrative purposes, in which a water heating system with natural (forced) circulation is installed, one can resort to the installation of single-circuit gas boilers. The review was made up of boilers of various price categories, which, according to buyers, have good heat dissipation.
Content
The product is a tank, inside of which a heat exchanger is placed. The coolant in it heats the water for hot water supply. There is also a valve that controls the flow of fluid from the boiler, which is also based on the principle of DHW priority. It is worth noting that almost all gas single-circuit boilers are equipped with devices for the operation of the boiler.
Based on the name of the product, the question arises: what other boilers are there?
There are 2 types of equipment - single-circuit and double-circuit. The first of them are intended for heating only rooms, others can also supply hot water.
Note! If a single-circuit model is connected to an indirect heating boiler, then it will also be able to supply you with hot water.
Types of boilers are considered according to the following parameters:
In order not to make mistakes when choosing, you need to clearly understand what type of product you specifically need. Therefore, you need to focus your attention on such conditions as performance (power indicator), installation conditions (compare the diameters of the nozzles and chimney with the room in which the boiler is located), as well as special features.
Special features include a security system, the presence of additional devices (thermometer, pressure gauge, etc.), various controls and functions.
To understand with which camera it is better to purchase a product (open, closed), you need to study the principle of operation of the equipment.Boilers with natural draft take combustion air from the room in which they are located, and the exhaust gases enter the chimney. Therefore, it is very important that the inside of the chimney be lined with a stainless steel insert to prevent collapse of the brickwork due to condensation.
Models with a closed combustion chamber are equipped with a special smoke exhaust system, so they do not require a chimney in the room. Combustion products are eliminated immediately from the furnace. Such devices are the best, but expensive.
As for the installation of equipment: the floor version will require space not only for the apparatus, but also for the piping (includes the installation of the pump, all its elbows, bushings, taps), as well as for the boiler, plus you need to add the installation distance according to the requirement. It is important that a vertical chimney be equipped. If you need a powerful unit, then the floor model is your option.
Wall models differ from their counterparts in compactness, as well as economy in terms of installation. The removal of combustion products can be done either through a vertical chimney or directly through the wall. The main disadvantage of this design is the low thermal power (up to 35 kW), the need for annual maintenance, while the floor boiler is enough to clean once every 3 years (sweep everything out of the furnace).
Despite all the nuances, the choice of a gas single-circuit boiler remains with the buyer.
The popularity of models among gas boilers is explained by reliability and practicality, at a time when the condensing apparatus, although modern and more economical, requires more electricity. Its efficiency can vary between 110-115%.Other disadvantages include its high cost, which is 2-3 times higher than for gas equipment and the formation of condensate during operation, which is highly oxidized and cannot simply be drained into an autonomous sewer.
The parapet boiler, although a chimney-free non-volatile device, is intended only for heating small rooms, houses. The main disadvantages of the product are the need for constant gas and its pressure, stringent installation requirements, constant monitoring of gas leakage, as well as the assistance of specialists during connection and maintenance.
What else to look for when purchasing a single-circuit gas boiler. By studying the product description, customer reviews, it is easy to track popular models. The best manufacturers always occupy a leading position in the market, which means that they can “boast” of the quality of the goods and the flawless operation of the boilers. In the online store, you can put a filter by price, by type, new items, and the like, which makes it easier for the consumer.
Take note of what product you need right away: from a domestic manufacturer or a foreign one; with mechanical control or electronic, budget options or more expensive.
The purchase can be made online - this is the fastest and most reliable way. To begin with, in the "Filters" section, you must specify all the requirements for the equipment, then select the appropriate model from the proposed list and add it to the basket. Next - placing an order (filling in the data and delivery address at a convenient time for you).
A volatile model with an open combustion chamber is able to heat an area of 100 sq.m. Mechanical control.For safety, gas control and overheating protection are provided. There is a manometer.
For connection it is necessary to use two branch pipes with a diameter of 1/2 inch and 2 inch. Chimney - 12 cm.
Specifications
Type of: | convection |
Maximum heat output: | 10 kW |
Gas consumption: | 1.1 cu. m/h |
Rated pressure: | 13 mbar |
Water pressure in the heating circuit: | 1.5 bar |
Heat carrier temperature: | +40-+90 degrees |
Accommodation: | outdoor |
Power type: | natural gas |
Dimensions (see): | 34/62/49 |
The weight: | 35 kg |
efficiency: | 0.87 |
The average price is 13210 rubles.
The heating boiler of this manufacturer complies with both domestic GOST and European and American standards. The coolant with a volume of 16.5 liters is placed in a high-quality steel heat exchanger, which is coated with anti-corrosion enamel and treated with an inhibitory composition, due to which it is not afraid of the influence of aggressive factors.
The equipment is endowed with original components of the gas burner device, autonomous safety of the Italian concern SIT and Polidoro injection microtorch burner. The high degree of safety is also indicated by the protection system against draft interruption, soot formation, and boiler blowing.
The main feature of the product is convenient maintenance due to removable lining elements and profile equipment.
For installation use connecting 1-1/2 inch and gas 1/2 inch branch pipes.Chimney diameter - 12 cm.
Specifications
Combustion chamber type: | open |
Rated heat output: | 11.6 kW |
Operating pressure: | 0.1 MPa |
Accommodation: | outdoor |
Material consumption: | up to 1.16 m3/h |
Flue gas temperature: | 110 degrees |
Possible temperature at the outlet of the apparatus: | 90 degrees |
Overall dimensions (see): | 67,7/28,2/47,3 |
Net weight: | 34 kg |
efficiency: | from 87% |
The cost is 17580 rubles.
The device from a foreign manufacturer (Germany) has a modern design, suitable for installation both in private houses and apartments. It is able to serve an area of 240 square meters. and prepare hot water in flow mode. The technique is not whimsical to voltage drops, gas pressure. It is endowed with an anti-blocking pump system, integrated frost protection, modulating burner operation to adapt to the boiler output, indication of error codes that are displayed on the LCD display, as well as electronic ignition and flame control using an ionization electrode.
Possibilities: connection of a room thermostat or an Open-Therm controller.
Specifications
Combustion chamber type: | closed |
Preparation of water for domestic hot water: | built in |
Rated heat output: | 24 kW |
Installation method: | wall |
Minimum heat output: | 7.2 kW |
Parameters (see): | 40/70/29,9 |
The weight: | 30 kg |
Consumption: | 2.8 cu. m/h |
Expansion tank volume: | 6 liters |
Pressure: | 0.5 bar |
Maximum flow temperature: | 40-82 degrees |
For the price - 38928 rubles.
Turbocharged single-circuit boiler for heating and hot water preparation by connecting an indirect heating boiler, equipped with continuous electronic modulation of the flame in heating and hot water modes, smooth electronic ignition, a patented air supply control system, a turbine hot water flow sensor (flow meter), digital temperature display. As well as an electronic self-diagnosis system, ionization flame control, a pump and three-way valve blocking protection system and frost protection in heating and DHW circuits.
What is: built-in pressure gauge, automatic bypass, there is a filter at the cold water inlet, a push-button LCD display, thermostat protection against water overheating in the primary heat exchanger, a draft sensor that monitors the safe elimination of combustion products. In addition, there are also: a safety valve in the heating circuit, a pressure switch, weather-compensated automation, an energy-saving circulation pump with a built-in autonomous air vent.
Technical capabilities: reconfiguration for operation on liquefied gas, connection to solar collectors, adjustment and automatic maintenance of the set temperature in the heating and hot water circuits, connection of a room thermostat and a programmable timer, output of a boiler blocking signal to the dispatcher console.
Description of the individual components: Flame spreaders on the burner are made of stainless steel, the copper heat exchanger is coated with a special composition for additional protection against corrosion, the 3-way valve is made of brass.
Specifications
Camera type: | closed |
Maximum heat output: | 24 kW |
Operating pressure: | 3 bars |
Installation: | wall |
efficiency: | up to 92.9% |
Overall dimensions (see): | 73/40/29,9 |
The weight: | 32 kg |
Expansion tank capacity: | 6 liters |
Electrical protection class: | IPX5D |
Power consumption: | 130 W |
Temperature range in various modes (degrees): | 30-85/35-60 |
Gas consumption: | 2 kg / h - liquefied, 2.73 cu. m/h - natural |
Mounting parameters (diameter): | 3/4 inch and 1/2 inch - heating and hot water circuit, respectively, 3/4 inch - gas pipe, 6/10 cm - chimney |
The average price is 44183 rubles.
Volatile design with an atmospheric type burner for space heating up to 160 sq. m (including ceiling heights up to 3.5 meters) is equipped with a steel heat exchanger of increased strength, has relatively small dimensions.It can be used in systems with natural circulation of the coolant. And also in closed lines using a circulation pump and an expansion tank (purchased separately).
Specifications
Burner type: | open |
Thermal power: | 16 kW |
Pressure: | 1 At |
Type of allocation: | floor |
Power type: | natural gas |
Dimensions (see): | 74,5/46/39 |
The weight: | 46 kg |
efficiency: | 0.925 |
Material: | steel |
The cost is 25480 rubles.
This model is equipped with a cast-iron heat exchanger, a gas burner with continuously adjustable power, an autonomous control system for heating the coolant and a self-diagnosis system that displays the operating mode and errors on the control panel.
What else does the equipment consist of: a natural draft chimney, a combustion chamber, a safety valve on the heating circuit, a pressure gauge, automation and safety devices (draft sensor, thermostat, flame control probe, etc.).
Specifications
Combustion chamber type: | open |
Maximum heat output: | 48.7 kW |
Energy consumption: | 15 W |
Accommodation: | outdoor |
Power type: | natural, liquefied gas |
Parameters (see): | 85/35/71,5 |
The weight: | 180 kg 500 g |
Primary heat exchanger material: | cast iron |
Heated area: | 480 sq. m |
efficiency: | 0.9 |
Permissible volume of water in the boiler: | 20 l 200 ml |
Maximum circuit temperature: | 85 degrees |
Gas consumption: | 5.72 cu. m/h; 4.2 kg/h |
Permissible pressure: | 20 mbar |
Chimney diameter: | 16 cm |
Producing country: | Italy |
How much it costs - 103630 rubles.
Equipment for the preparation of hot water in an indirect heating boiler can serve up to 350 square meters. m. It is suitable for installation, both in apartments and private houses. Compatibility with the Wolf system allows you to control the boiler at any time using the ISM7 interface module via a smartphone or computer on the Smartset portal.
Specifications
Camera: | closed |
Max Power: | 35 kW |
Pressure: | 3 bars |
Gas consumption (max): | 3.68 cu. m/h |
chimney connection diameter: | 6/10 cm |
Expansion tank volume: | 8 liters |
Accommodation: | wall |
Max water temperature: | 65 degrees |
Parameters (see): | 65/40,8/31 |
The weight: | 35 kg |
Manufacturer: | Germany |
How much it costs - 151,700 rubles.
This model is designed for reconstructed and standing residential buildings and apartments with the possibility of installation in a residential area. The minimum side clearance requirement is 10 mm. The boiler is provided with a power regulator, a winter-summer switch, an automatic air vent and an adjustable bypass valve, as well as a safety valve.
The burner is made of chromium-nickel steel.
What is: intelligent pressure control, permanent anti-freeze and anti-jamming protection of the pump and 3-way valve when idle for more than 1 day, setting to partial power, electronic ignition and control of all functions, self-diagnostic system, built-in module for the e interface -bus.
Specifications
Camera: | closed |
Permissible power: | 36 kW |
Minimum heat output: | 14 kW |
Accommodation: | wall |
Heating area: | 360 sq. m |
Height / width / depth (see): | 80/44/33,8 |
Nominal tank volume: | 10 liters |
efficiency: | 0.91 |
Number of power steps: | 3 pcs. |
Warranty card valid for: | 5 years |
The cost is 112,170 rubles.
How to choose the right model of the device is described in detail above, but finally, it is worth listening to advice if the consumer decides to install a gas boiler:
Which one is better to buy a gas single-circuit boiler from the proposed list - the choice is yours. The rating consists only of high-quality models that justify their cost. But before installing the device at home, it is necessary to draw up an installation project and coordinate it with various regulatory authorities on this issue.
The buyer must understand that the installation must meet the mandatory conditions: the presence of a good ventilation system and the removal of combustion products, and these are additional costs.