Rating of the best metal scissors for 2022

The construction of houses and cottages, the laying of communications are most often carried out far from power supply points. It is easiest to cover the roof with a roof, build a fence from corrugated board and cut fittings to fit various structures in such conditions with a hand tool. We offer a rating of the best metal scissors for 2022 and their brief description. The top includes models of various designs and purposes.

What types of scissors are produced

Metal scissors - what are they and why are they needed in everyday life, which company is the best product to buy. Hand tools are widely used in everyday life and among professionals. It is used by tinsmiths, builders, window installers, electricians and other workers.

According to the method of actuation, it is possible to distinguish a hand-held mechanical tool, electric and driven by hydraulics or compressed air.

According to the cutting method, the models are divided into straight lines and having additional functionality in the form of a cut along an arc or processing two planes at once.

Professional scissors usually have a narrow specialization, for example for profiles or cables. Powerful due to amplifiers, high-performance, they are mainly used in construction.

Top best scissors for metal

Our experts have compiled a rating of the best scissors for 2022, according to buyers and specialists. Each model is reviewed, the main characteristics are indicated.

Manual mechanical

When choosing which is better to buy a tool for domestic use, lovers of tinkering and repairing with their own hands pay attention to manual mechanical models. They are able to cut a flat sheet up to 1.2 mm thick. This is enough to cut the details of the canopy, fence, roof and various useful and decorative crafts.

Professionals have higher popularity of specialized models with cutting of corrugated sheet, embossed profile, with cut along the radius, slotted ones.

The principle of cutting the tool is simple, based on the increase in force due to the operation of the lever. Long handles and relatively short knives.

Kraftool Universal 2324-S

1395 rub.
1st place, construction.

Kraftool's straight cut construction tool is a top quality hand tool. Professional, they, according to customer reviews, have been operating for 5 years in active operation without breakdowns, do not require sharpening. The device is designed for cutting sheet metal up to 1 mm thick, in practice it copes with rolled products one and a half times thicker.

The working part, made of a high-carbon alloy alloy - chromium-nickel, passed after sharpening, hardening and has a hardness significantly higher than building steels. The length of the whole model is 26 cm, with a straight cut of 60 mm. The handles have a special rubber coating that prevents fingers from slipping and at the same time is an electrical insulator.

• wear-resistant;
• durable;
• professional;
• average price;
• sponges do not require resharpening;
• handles covered with rubber;
• there is a blocking lock;
• secure grip;
• affordable;
• light - 490 g.

• after 5 years, the spring may break, it is impossible to buy a replacement.

Lever Shears HS-6

5900 rub.
2nd place, professional, lever.

The stationary model of the lever type with a desktop installation HS-6 is designed for cutting non-hardened sheet metal up to 6 mm thick. Cutting length in one pass - up to 15 cm, optimal. On lever guillotine shears, you can cut a bar up to 11 mm in diameter. The FERROX product is made in China.

Lever scissors are easy to install on the table and fasten to the tabletop by one person. Their weight is 11 kg. Length and width 12 × 30 cm. Height from the sole to the top of the handle in the raised position 63 cm.

• professional;
• lever type;
• stationary;
• cut sheet six;
• cutting length up to 15 cm;
• replacement knives are sold freely;
• durable;
• simple construction.

• do not cut high-alloyed and hardened hoists.

Hardax 19-6-310

648 rub.
3rd place, for those who like to swear at home.

The length of the cutting part - 80 mm and the thickness of the sheet - up to 1.2 mm is enough to cut the metal profile onto a roof or fence. The Hardax 19-6-310 model is designed for home use. The working part is made of durable stainless metal, ergonomic handles with plastic and rubber overlays, and a simple device.

The brand is registered in the UK. Produced in China. It has an increased cutting force due to a special lever mechanism.

• on the cutting edges there are special notches from slipping out of the metal;
• double lever mechanism;
• inexpensive;
• durable;
• the working part of their hardened chrome-vanadium steel;
• handles are covered with plastic and rubber, do not slip.

• not always on sale.

Stayer "PRO-Cut" 250 straight

491 rub.
4th place, for hard steels.

Professional metal scissors can make straight cuts and curly cuts. The device is designed to work with high-carbon, alloyed, stainless steels of increased hardness. They are also used for cutting sheets of non-ferrous metals and their alloys.

The Stayer brand is registered in Germany. The production facilities for the production of hand tools are located in Taiwan.

The total length of the knives with handles is 24 cm. The design is double-lever. Handles are two-component ergonomic.The maximum thickness of cold-rolled low-carbon metal is 1.2 mm, for hard steels the thickness is up to 0.7 mm.

• durable;
• reliable;
• budgetary;
• 1 year manufacturer's warranty;
• cutting hard steel.

• deficiencies were not observed.

Edma CISAILLE NR1 TP

3200 rub.
5th place, cutting.

The Edma CISAILLE NR1 TP model was created by French manufacturers for profile cutting and flat products. It cuts hot steel up to 1.2 mm thick, hard and stainless steel up to 0.6 in cross section, aluminum and its alloys profile with wall thickness up to 2 mm.

Manual professional scissors are designed to work when creating structures from metal profiles, cladding rooms with plasterboard, insulating facades, and creating light buildings. The data sheet of the model includes work with corrugated board and profiled sheet. The nozzle allows you to evenly distribute the force, and the cutting is smooth, does not tighten the edges of soft materials.

• smooth clean cut when cutting with a metal profile;
• a wide range of applications;
• cutting;
• professional;
• wear-resistant.

• deficiencies were not observed.

Erdi Bessey D17AL

547 rub.
6th place, left.

The German company Erdi Bessey is the best manufacturer of professional hand tools. D17AL is made with a left cut. The product is designed for straight and shaped cutting of sheet metal and mesh.
The device does not cause problems when it is necessary to apply large loads. It has a unique double linkage. In the course of work the processed preparation does not slip off, is kept by the gear notches made on a working surface.

• reinforced linkage;
• notches from slipping on the working surface;
• ergonomic handles;
• lock against accidental opening;
• German reliability.

• tight compression mechanism;
• short cutting surface.

Pro Cut Off Tapco 10379

RUB 36,295
7th place, roller, for professionals.

The Pro Cut Off Tapco 10379 model is designed as an additional tool for working with benders and independent use. Professional roller devices cut sheet and rolled metal, vinyl, PVC plates up to 0.6 mm thick.

The rollers can slide both in a straight line and along an arc, cutting out workpieces of complex configuration. Templates are used in mass production. The dimensions of the device are 37×27×20 cm. Simultaneous cutting of 2 sheets is possible if their total thickness does not exceed the nominal one - 7 mm.

• compact;
• high performance;
• reliable;
• cutting complex configurations;
• cast durable steel case;
• wear-resistant knives;
• the gap between the cutting edges is regulated;
• smooth edge without bends and burrs;
• There is a case for transportation.

• not compatible with some types of equipment;
• expensive.

Electrical

Electrical products are driven by a motor. They are battery operated and connected to a 220 V household network. Selection criteria include power and the number of revolutions - cuts, per minute. Rarely used in everyday life, mostly professional universal devices.

CALIBER ENN-700/3.2M

6119 rub.
1st place, straight cut and radius cut.

Household metal shears CALIBER EN-700/3.2M, electric, powered by alternating current 50 Hz, 220 V. Power 700 watts.This is enough to manually cut sheet metal up to 3.2 mm thick. Long-term work without interruption is possible with a smaller sheet thickness.

Cutting speed - the number of strokes of the upper knife, is idling, 2000 rpm. Not all popular models work with such speed. The minimum cutting radius when cutting along an arc is 50 mm. The scope of delivery includes a wrench for tightening the blades. Wear parts are commercially available. The manufacturer gives 1 year warranty service.

• high performance manual electric scissors;
• free to buy replacement knives;
• 1 year warranty;
• cut along a radius of 50 mm;
• cutting edges can be sharpened by hand;
• food from a household network.

• with a large thickness of the sheet, they are tight by hand.

Makita CP100DZ

4812 rub.
2nd place, construction, battery.

Makita shears are designed for use on construction sites away from power sources. The lower cost than a similar tool is due to the fact that Chinese manufacturers supply the CP100DZ without a battery and charger, they must be purchased separately.

Great effort and long service life of the knife is achieved by the presence of several cutting edges on it, which are gradually included in the process of cutting metal. Permissible workpiece thickness 6 mm. The edge is formed even, without burrs.

• rechargeable;
• universal;
• high performance;
• upper knife with several cutting edges;
• clean cut.

• The kit does not include a battery and charger.

DIODL NER-1-3,2

6108 rub.
3rd place, rechargeable.

Model DIODL NER-1-3.2 is powered by a battery.It cuts metal sheet up to 3.2 mm thick, designed for outdoor work in temperate climates. It is allowed to operate the power tool in frost down to -15 degrees.

The number of strokes of the movable knife at idle is 1600 rpm with a power consumption of 1000 W. Tool type - household with protection against electric shock of class 2. 1 year hardware warranty, 6 months battery warranty.

• good protection against electrical injury;
• there is a protective shield;
• high performance;
• rechargeable - does not depend on power sources.

• cooling system air blowing in the face.

DIOLD NER-0.65-2.5

6480 rub.
4th place, cutting.

Punch devices are designed for sheet metal and rolled products with corrugated and trapezoidal profiles. Cutting is performed in a straight line and complex configuration. The maximum thickness of rolled metal is 2.5 mm - aluminum and its alloys. Stainless steel and alloy steels up to 1.2 mm. Time of continuous work 30 min. with cutting speed 2m/min.

The product is designed for operation in areas with a temperate climate from +35⁰ to +15⁰. Has protection against defeat by current of the 2nd class, the single-phase collector electric motor.

Equipment power 650 watts. Mains supply current 220 V, frequency 50 Hz. The idle speed of the knife is 2000 rpm.

Delivery set includes: die, punch, wrench.

• cutting profile sheets;
• curly cutting;
• protection against electric shock;
• simple repair;
• knives and wrench included;
• light - 1.8 kg.

• heats up quickly;
• hard to find replacement knives.

Makita JN 1601

19813 rub.
5th place, carved.

The Makita JN 1601 model is intended for work with corrugated metal rolling.If necessary, they work with flat rolled sheets.

The reinstallation of the matrix is ​​​​stepless, turning it 360 degrees and fixing it when turning 90 degrees. The Makita JN 1601 has a built-in gauge for the thickness of the material being cut. The minimum arc radius is 4.5 cm. Powered by a household network. The power consumption of the model is 550 W.

• cutting of corrugated metal profile;
• clean cut;
• quick replacement of the die and punch;
• stepless reset.

• knives dull quickly
• expensive.

Hydraulic and pneumatic

Hand tools with hydraulic and pneumatic amplifiers are used by professionals. At home, he has no use. And having learned how much such equipment costs, no one wants to buy it in their garage collection.

The manual model is mainly used for cutting various types of cables. Cutting sheet steel of large thickness is carried out on industrial equipment.

Pneumatic cutters VHS

RUB 42,583
1st place, guillotine with pedal and hoses.

Professional pneumatic hand equipment. Used for trimming on one or two planes at the same time. It is used by teams of builders when installing door and window frames and blocks to shorten the strapping elements, create constipation. The accuracy of dimensions and connections is ensured when the scissors work simultaneously with the ruler indicating the size and the engine that limits the movement.

In addition to trimming the profile in 2 planes, VHS is used for punching holes for fittings and various types of decor. Construction and repair can be carried out without connection to the mains, the compressor is connected to a diesel engine.

The set of pneumoscissors includes a hose for connecting to the compressor and a foot control pedal.

• smooth cut of a complex profile;
• high quality;
• durable;
• easy punching for fastening fittings;
• convenient to work with a foot pedal;
• relatively low price.

• Not all fittings fit knives.

NGR 40 (KW)

RUB 18,920
2nd place, hydraulic manual.

Professional tool designed for installation of life support systems. Hand shears can cut steel cables with a diameter of up to 25 mm, cables of various types with a cross section of up to Ф40 mm, steel braided stranded ropes up to 2 cm thick. In addition, the device easily copes with armored cables, metal bars.

To increase the pressure on the model there is a hydraulic pump with fast idle, equipped with a manual pressure relief valve. On scissors in manual mode, a force of up to 7,000 kg is created. The weight of the model is 5.5 kg.

• great effort;
• smooth end face regardless of the material and number of layers;
• the ability to work anywhere, dispenses with stationary equipment;
• convenient case for packing and transportation.

• deficiencies were not observed.

KVT NGO-85 64083

RUB 48,345
3rd place, professional, industrial.

The company that developed the CBT NGO-85 is registered in Russia. Scissors are produced at the production facilities in Taiwan. The model is designed for high-voltage cable installation. The movable upper part of the blades with the gradual gripping function allows you to compress and cut in one pass the cable with a diameter of up to 85 mm.

The weight of the fixture is 5.4 kg. Length, total, scissors - 49 cm. The best models for working in the field away from settlements. They can be used anywhere, regardless of energy sources, in narrow tunnels, trenches and at high altitudes.

• compact;
• create a lot of effort;
• the connector allows you to easily bring the knife under any cable;
• 5 year warranty.

• expensive.

How to choose

Before choosing the type of shears for metal, you should analyze the amount of work, sheet thickness and metal grade. What to look for in the first place - the tool must match the characteristics of the material to be cut. If it is used in a workshop, in a small enterprise, a functional, high-performance one should be taken. Budget models are suitable for home needs.

When building a house and a fence, it is enough to have the simplest mechanical model. It will allow you to cut to size, trim at the joints.

If you take into account the recommendations of experts, when creating structures of complex configuration from sheet steel, you should choose universal equipment with a cut along the radius.

The main mistakes when choosing equipment for self-repair and construction of a roof are the purchase of universal expensive scissors. A high-quality model with a budget cost is enough to cut several sheets of metal profiles for a roof. Then the device will lie idle for a long time.

Where could I buy

You should buy the tool from trusted sellers. These are specialized markets and online stores that have been operating for a long time. They guarantee the quality of the products, in case of marriage they will make a replacement. If the manufacturer gives a guarantee, the technical passport and repair coupons must be included in the package.

You can listen to the advice of friends, buy on the market a little cheaper. At the same time, there is a high probability of getting a device that is of poor quality and will quickly break.No service or replacement warranty.

Manual scissors for metal are widely used. They are not only used by amateurs. The tool is widely used by professionals, private workshops and even large enterprises.