Rating of the best table lamps for 2022

Table lamps are one of the most important workplace attributes for any person. The concentration of a person, his visual health and general comfort during work depend on how well the lighting is chosen. Modern brands offer potential buyers a variety of table lamps, the choice of which should be based on some nuances. And these include style solutions, and technical advantages, and conditions for the proper operation of the lighting device.

Main parameters, design and principle of operation

Table lamps include special lamps that are located directly on the horizontal surface of the table, for which they are supplied with a stable base. Mobility is considered one of their main properties - for placement on a countertop, their design should not involve a complicated installation procedure. The installation consists in giving them a fulcrum or fixing them in a simple way.

If the table lamp is placed properly, it will create the most convenient conditions for:

• Work in low light (or in the dark);
• Performing written work by teenagers or children of primary school age without compromising eye health;
• Maintaining comfort conditions when working with a computer or laptop;
• Creating an alternative to the main light source in the room (in order to avoid interference with nearby people who are sleeping).

The devices in question belong to the category of additional light sources, they are designed to create a limited area on the table, bringing bright light into it. This condition helps to reduce pressure on the optic nerve, which increases the overall performance of a person, while reducing the risk of headaches. In addition to the workload, they bring a design element to the overall interior of the room, so such devices should be selected taking into account the existing style interior solutions.

IMPORTANT! However, the style should not fundamentally diverge from the technical parameters necessary for work, such as: the height of the structure, the direction of the light, the intensity of the glow.

The devices under consideration themselves consist of a base base, a leg (column), a light diffuser, an incandescent lamp (diode or tube), a latch, an electrical wire, an on / off toggle switch, and a socket plug (for stationary samples). Work occurs due to the flow of current through the electric wire to the lamp, which gives out light. The light itself is scattered, covering only a certain area on the table area. On some models, it is possible to adjust the intensity of the luminous flux using the corresponding switches.

Modern types of table lamps

Table lamps were originally designed primarily to play an applied functional role and only then to be decorative items in the interior. Today, they owe their decorative effect to a large assortment of samples on the market, which are able to take into account any wishes of potential buyers.

Relatively speaking, the entire existing modern set of species can be divided into three categories:

1. Office - are characterized by great functionality, and their design is weakly "tied" to issues of style or design (they necessarily have the ability to change the angle of inclination of the light source);
2. School (children's) - a kind of alternative to the previous category, but they are more focused on home use (they may have a characteristic children's design);
3. Traditional - stationary models, often having a constant angle of inclination of the light source, a striking example of which are bedside models with a floor lamp.

It is worth noting that these categories do not include projectors or children's nightlights, because they have a completely different purpose and classification, and their main task is not at all to form a limited illuminated area. Their goal is to create an atmosphere of soft twilight with low light throughout the room.

According to the type of installation, products can be divided into:

• Models with reinforced fixation - their bases are very firmly attached to the tabletop by means of screw connections, their installation / dismantling takes a certain time, but it will be almost impossible to move them;
• Models with fixation of medium hardness - such samples are attached to the tabletop with a clothespin, they can prevent accidental displacement, installation / dismantling does not take much time;
• Models with a classic installation - such samples have their own support base, which only needs to be installed on a flat surface, they are not immune from accidental displacement.

It should be noted that some brands offer several fixation options on one design at once (the so-called hybrid ones), therefore, they put various fixing bases into the delivery set.This move is considered quite reasonable, because it provides the user with a wide range of fastener options that can be selected for a particular piece of furniture.

According to the type of inclusion, the devices in question can be equipped with:

• A simple electric cord (lights up when the plug is inserted into the socket);
• Touch (turns on by touching the diffuser lampshade);
• Dimmer (smooth change in intensity through the buttons);
• Buttons on the case;
• Toggle switch on the wire.

In addition, according to the type of work, the lamps are stationary or battery-operated. The first varieties are more versatile, the latter are more often used in children's rooms.

light sources

Light sources in the devices under consideration can be completely different. At the moment, the most popular are LED, but other options remain quite in demand. Each light source has its own operating characteristics:

• LED - they imitate simple sunlight very well, have a low power of 6 watts and are suitable for any age category. They are recognized as the most environmentally friendly: unlike incandescent lamps, they do not emit toxins into the air during operation. However, their price is much more expensive than usual, but the service life is longer (the average period of limiting operation is about 5 years). They are also characterized by low power consumption, and the light they give out is soft and flicker-free.
• Classic - they are sources of artificial light, which is created by heating a tungsten filament, which is heated by electricity to a certain temperature.Such light sources have a very limited service life (about 1000 hours) with a very low efficiency, because in the process of heating the thread, about 5% of the energy is converted not into light, but into heat. In desktop versions, low-power samples of such sources are usually installed (power up to 25 watts).
• Luminescent - they are gas-discharge mercury sources made in the form of tubes with a power of up to 11 watts. Ultraviolet radiation in them is created due to the interaction of the phosphor with mercury vapor inside the tube. In their shape, they can be straight or U-shaped. Their technical characteristics are somewhat similar to LED ones, because their glow is the same uniform.

Since it is necessary to compare the types of light sources described, it is possible to highlight some of their features:

• LED sources consume the least energy, which is about 330 kilowatts per hour;
• Incandescent lamps have the shortest service life, followed by fluorescent lamps, LEDs last the longest;
• The least dependent on ambient temperature and humidity are LED and incandescent lamps;
• Fluorescent is not recommended to turn on / off too often;
• Incandescent lamps emit the most carbon dioxide during operation.

light colors

For any table lamp, the color of the emitted light should be as close to natural as possible. The purpose of such compliance is to take care of the organs of vision of the person who will use this desktop device, and the light should not cause the body to get used to it. On the technical side, the emitted color is indicated by temperature (in Kelvin):

• Cold - the temperature is set to 6500 K, which is quite harmful to human eyes and will take some getting used to;
• Too yellow - the temperature reaches 2700-3000 K, a tolerable level, but it will interfere with concentration;
• Moderate and warm - adult standard at a temperature of 4500 K, optimal for working with documents;
• Warm "childish" - very soft dispersion at a temperature of 4000 K.

It is worth noting that cold and white colors are inherent in small halogens, which heat up very quickly, which is why they are used in the automotive industry, and they are enclosed in a durable case. LED - they do not warm up very quickly, their intensity can always be fine-tuned for themselves, so getting a natural color from them is much easier. Moreover, today they can be given a specific color shade (for example, green or yellow), although you can also make it completely unnaturally white. There are restrictions on children's models - it is forbidden to use too bright or poisonous aggressive colors in them - matte or metallic shades are recommended.

From the point of view of ophthalmologists, the following shades are considered the most pleasing colors for the human eye:

• woody;
• metal;
• Sand beige;
• Green bottle;
• Dark blue;
• Deaf burgundy.

Forms and materials of manufacture

Oddly enough, but the shape and design solution of the case in which the model will be made will directly depend on the material used for production. The most common are plastic, ceramics, metal, brass, polymers. Slightly less common are wooden ones - they must be covered with a special fire retardant composition. Samples made from specially prepared paper or fabric are considered quite exotic options. The modern market is replete with many models made in the following styles:

• Glamor and retro;
• Hi-tech and art-new;
• Abstraction and underground.

The diffuser-plafond, as one of the main parts of a desktop device, can also have its own shape. Most often used:

• Rectangle with rounded ends;
• Prism;
• Cylinder;
• Cone;
• Trapeze;
• flat circle;
• Semicircle;
• Hollow truncated sphere.

Rules for competent placement

Proper positioning of the table fixture is very important, otherwise its light will have a negative effect on the retina and optic nerve. In order to avoid unpleasant situations, you should follow a few simple tips:

• For left-handers and right-handers, the lamp should be located on the sides opposite to the writing hand - this is necessary so that the shadow does not fall into the working area;
• The minimum distance between the light source and the eye must be at least 50 centimeters;
• The minimum height of the lamp above the tabletop must be at least 30 centimeters, and the light source must be 40 centimeters from the working area (the angle of incidence of the beam can be adjusted).

Proper workplace lighting

These councils are formed on the basis of labor protection rules established at the legislative level in the Russian Federation:

• The formation of a reflective effect from the countertop is not allowed;
• Direct light falling on the user's face is not allowed;
• The illuminated work area should not be blocked by a shadow from other objects;
• The light flux should come out evenly, flickering is not allowed;
• The desktop model must have a swivel mechanism;
• The brightness of the source should be optimal and not irritate the organs of vision;
• The device used must maintain full functionality when switched on / off repeatedly;
• Lighting should not create glare on monitors used office equipment.

Difficulties of choice

Before making a purchase of a desktop lighting fixture, you need to pay attention to many factors, which include the age of the potential user, the design, the light colors, the dispersion method, and the mounting method. Experts consider the model with the following parameters to be the best option:

• The presence of a height adjustment system;
• 360 degree tilt/swivel capability;
• Metal cover - diffuser;
• Touch or toggle switch;
• LED light source;
• Clamp fixation.

IMPORTANT! It is undesirable to use models with a glossy diffuser coating, with mirror elements, which have a easily soiled body and require frequent maintenance. Also, it is not recommended to purchase models whose body is made only of plastic, because during prolonged use it may melt.

Regarding light sources, the options with the following parameters will be optimal:

• LED - 4-7 watts;
• Gas discharge - 10-12 watts;
• Incandescent lamps - 40-60 watts.

At the same time, the following characteristics should be carefully analyzed:

• Fixing method on the table;
• Overall reliability and quality;
• production material;
• Ability to adjust the intensity of lighting;
• Compliance with the overall interior design of the room;
• Cable length (standard - 1.5 meters, optimally - 3 meters);
• Correspondence of price and quality.

Table lamp for a student

When purchasing a desktop device for a student, you must follow some rules:

• Cold light is harmful and unacceptable for children's vision;
• Halogens are also better not to use;
• The most acceptable shape is a semi-circular shape with a movable arm with a controlled light source and adjustable height;
• Glass thin ceiling - not the best option;
• Too heavy and massive model can overload the countertop;
• The best fixing method is a simple base without fastening or a “clothespin”;
• Excessive decoration of the body is unacceptable, because. can bring down the working mood.

Rating of the best table lamps for 2022

Budget segment

3rd place: "GENERAL table on the base, lamp black E27 60 W"

This luminaire is based on a standard base, the maximum power is rated at 60 watts. The light source (lamp) itself is not included in the kit, so the user is free to choose it independently, based on the goals, required power, color temperature. There is a switch on the body, the ceiling is made of metal with different colors. The flexible pole is encased in a corrugated plastic shell, which allows you to adjust the inclination of the ceiling. The length of the electric wire is 1.1 m, the total height of the device is 33.5 cm. The degree of protection is IP20, the required voltage is 220 V. The laconic design has no unnecessary details, the ceiling is made in a classic form, the lamp will look harmoniously in any room. The recommended cost for retail chains is 436 rubles.

• Compactness;
• Bright light;
• Adequate price;
• Rugged housing.

• The lamp is not included.

2nd place: "TopSALE LED, table lamp, 24 diodes"

This LED model is characterized by versatility. It is lightweight, compact and easy to use and easy to carry. Works from the accumulator battery. It has various lighting positions, it is possible to choose any suitable mode.It can be used in everyday life as a desktop, or you can bring it with you to the garage, on vacation or fishing, or use it as a flashlight. This model has 24 built-in LEDs, which indicates a powerful emission of bright light. The recommended price for retail chains is 579 rubles.

• Small dimensions;
• A light weight;
• 24 built-in LEDs.

• Operates exclusively on battery power.

1st place: "Beauty & Love manicure table lamp"

Very handy table top. Perfect for a manicurist. Provides comfort at the table when creating beautiful drawings.

Perfect for removing glare. The luminaire has a deep round lampshade, through which it is possible to create excellent illumination of the working area. The device has a high adjustable knee, which can be set at the required height. The plafond allows you to easily change the direction of lighting: it can rotate around its axis, and besides, it is adjusted vertically, which allows the master to choose the angle of incidence of light.

Fixed on a tripod to the desktop, so the device does not take up much space in the workspace. The recommended retail price is 1177 rubles.

• high knee;
• Easy change of illumination angle;
• Fixation with screws.

• Not detected.

Middle price segment

3rd place: "Light LED "Ring"

This model is attached to a clothespin, has 3 modes of operation, can operate on battery and from the mains.The control is carried out using a sensor, the source is mounted on a long flexible leg. The temperature of the light flux is 7000 Kelvin. A 1200mAh battery is used, the service life of which is 500 recharge cycles. Works in 3 glow modes: "Bright" for 2 hours, "Moderate" for 3-4 hours and "Night" for 20 hours. The battery is fully charged in 3 hours. A USB charging cable is included in the kit. The lithium battery can always be replaced if necessary. This model will perfectly fit into any today's interior, which will fill the original soft, even light at the time of work. The recommended cost for retail chains is 1239 rubles.

• Soft and even light;
• 3 operating modes;
• Variability in the use of energy sources.

• Too cold light in bright mode.

2nd place: "LED table lamp Home Market"

This LED lamp is also a desk organizer for stationery, it is considered an ideal solution for study and work. The table lamp has 2 lighting areas and 6 power settings. Can work both from a network, and from the battery accumulator. The organizer can also be used to store small change on the table, and can also be used as a stand for the phone. The recommended cost for retail chains is 1300 rubles.

• 6 operating modes;
• Two independent light sources;
• Multifunctionality.

• Not detected.

1st place: Table lamp ERA NLED-462

This lamp with light-emitting diodes (LED) used as light sources will save up to 90% of electricity. The diodes themselves do not require replacement for a long time. There is a touch control switch located on the base. A 3-step dimmer makes it easy to adjust the brightness of the light. The body structure is foldable. The light source spreads a warm color with a temperature of 3000 degrees Kelvin. The recommended cost for retail chains is 1500 rubles.

• Folding body design;
• Soft and warm glow;
• Saving electricity.

• Not detected.

Premium class

3rd place: "Inspire Belle-Ile 1xE14x40W"

Stylish desktop model is perfect for any room: bedroom, living room, hallway and even kitchen or bathroom. Thanks to its minimalistic and laconic design, it will fit into almost any interior. The stand made of wood is made in the form of three legs, which gives this model a touch of Scandinavian comfort. Model Belle-Ile is a great way to add originality to the interior, which will make life warmer and brighter. Almost any LED lamps are suitable for the lamp, however, it is necessary to check the type of base indicated in the product characteristics. The recommended cost for retail chains is 1740 rubles.

• Compatible with many voice assistants;
• Stylish design;
• Easy assembly.

• Somewhat large dimensions.

2nd place: "Xiaomi Yeelight YLTD02YL EU LED Lamp"

This model has a flexible leg made of durable alloy with a pleasant to the touch silicone coating. The rest of the elements are made of durable and strong ABS plastic.The lamp leg has been tested in the laboratory, where even after 10,000 bends, it has retained all its technical capabilities and appearance. The device is equipped with 60 LEDs of different light temperatures (30 with warm light and 30 with cold light, which are installed alternately), it is possible to adjust the light temperature within the limits of 2700K-6500K (Wide limits). The high quality LEDs have an excellent color rendering index (Ra) of 88. In order to create an even light diffuser, a light filter material was used to help reduce the amount of blue light emitted. The recommended cost for retail chains is 2500 rubles.

• High color rendering index;
• 60 powerful LEDs;
• Housing made of durable plastic.

• Overcharge.

1st place: "CAMELION LED table lamp 5W"

This pattern is great for home and office use. Easy to install and operate. Easily activated via touch sensor. There is a choice of 3 modes that allow you to adjust the intensity of lighting in the room. The lamp is used for reading, as well as for working with documents at the desk. The recommended cost for retail chains is 2800 rubles.

• Multifunctionality;
• Stylish modernist design;
• Soft warm light.

• Not detected.

Conclusion

Today, the consumer is offered a rich assortment of table lamps. When choosing, the purpose of the device should be taken into account: for the workplace of an adult or for a child, for lighting in the bedroom or for light zoning and decor.When buying a table lamp, you should definitely ask the seller to demonstrate the product in action and evaluate the device in terms of comfort, stability and ease of illumination for vision.