Rating of the best wall-mounted fan heaters for 2022

Wall-mounted fan heaters can economically and inexpensively heat a room both in an ordinary apartment and in a country house, and their older counterparts - industrial fan heaters (fan coils and heat guns) - can easily heat a department store trading floor or a large production workshop. Naturally, they are unlikely to be able to compete with central heating systems, but they will help maintain a comfortable air temperature in the cold season. Professionals believe that it is wall-mounted equipment that is the most powerful and reliable than their relatives, which are mounted on the floor or installed on tables.

Wall fan heaters - general information

The equipment in question is a heating device for regulating the air temperature in the room. Wall options, in most cases, are made in the form of rectangular devices based on a metal case. Their dimensions can be completely different, so it will not be difficult to choose a model for placing any quadrature.

The devices operate according to the rules of heat transfer from the heating element to the air mass entering it. Therefore, the air stream leaving the equipment will have a higher temperature index than the one that this stream had at the inlet. From this it is clear that the efficiency of the device is directly dependent on the quality of the heating element. And there are three types:

1. Standard heating elements - these elements are a sealed tube made of a material with high thermal conductivity, which has a special metal rod inside. These elements always have a curved shape, sometimes they can be made in the form of the letter "M".
2. Ceramic - they include several rods, which are plentifully poured with a layer of heat-resistant ceramics. Most often they look like honeycombs with small cells, inside of which an air flow passes, pumped there by a fan. Devices based on ceramic heating elements are considered the safest, however, they are very expensive. Their only drawback is that they take quite a long time to reach the proper working threshold (simply, they warm up for a long time).
3. Spiral - they are made in the form of a metal rod twisted into a spiral, on which a thin wire made of nichrome is wound. These devices belong to the budget price category.

Also, the design of any wall fan heater must include:

• Metal/plastic case;
• Blocks of control and management;
• Vane impeller;
• Electric motor.

Areas of use

As mentioned above, wall mounted fan heaters are designed to maintain the proper level of heat in the room. They can be used almost anywhere, but most often they can be found in offices and residential apartments / houses. According to the principle of their action, they are in many ways similar to their counterparts - air conditioners. But it is wall systems that are usually installed:

• in country houses;
• in garages;
• in workshops;
• in offices;
• On flights of stairs.

Additional device options

The equipment in question belongs to the category of climatic, which means its versatility. Fan heaters can work both as a heater and as a conventional fan. In order to make the operation and maintenance of these devices easier and more comfortable for the user, they must be equipped with additional options.These include:

• Electronic control unit - it allows you to set the operating mode of the device, the heating temperature, the blowing speed - all this can be configured both on the control panel of the device and using the remote control;
• Special sensors - they are responsible for automatically shutting down the equipment in case of overheating;
• Thermostat - it allows you to smoothly change the temperature regime;
• Timer - through it you can set the time to turn on / off the device without user intervention.

Advantages and disadvantages of wall models

As practice shows, hanging models are the most popular in the market among buyers. In any case, they are equipped with remote controls (which makes it easier for the user to control), they are unpretentious in cleaning and maintenance. The advantages of wall-mounted fan heaters include:

• A large percentage of maintainability;
• Laconic design and pleasant appearance;
• Possibility of continuous operation without direct disconnection from the network;
• They do not emit unpleasant odors during operation;
• Their heating is fast and uniform;
• They have good power;
• They have good energy efficiency indicators;
• Their thermostats are accurate and accurate;
• In the presence of most of the additional options (from the remote control to the timer);
• Easy to use and manage;
• Simply mounted;
• The weight of the device, as a rule, is small;
• Dimensions are compact.

However, some models may have significant drawbacks:

• Slow rotation of the working blades (cheap models usually have weak motors);
• The remote control sensor may not always respond accurately to the IR signal;
• Options may not include airflow control;
• Plastic housings may emit unpleasant odors when first turned on;
• The electric motor may be too noisy;
• The power cord may be too short;
• Sometimes, a branded model can cost ten times more than its unknown counterpart;
• Objects near the machine may become excessively hot.

Calculation of the minimum power depending on the area of ​​\u200b\u200bthe room

Often, you can hear complaints from users that a wall-mounted fan heater cannot cope with heating. However, in most cases, the low efficiency of the device occurs due to the wrong choice of model for a certain area. First things first, you need to focus on power. This indicator is calculated according to the simple formula P=S/10, where:

• 10 - numerical multiplier for a letter expression (i.e. coefficient);
• S is the area of ​​the heated room in square meters;
• P is the power value in kilowatts.

This is the simplest calculation option. You can also apply a more complex calculation, called complex - V * T * K \u003d kcal / h. It takes into account:

• T is the difference between the internal and external temperatures;
• K is the scattering coefficient;
• V is the volume of air space for heating in cubic meters (WIDTH x LENGTH x HEIGHT).

With such a calculation, it should be taken into account that the dispersion coefficient will depend on the materials used in the construction of the premises, which cannot be known without the use of special measuring tools. Therefore, ordinary buyers prefer to use the first method, for example: the heating area is 12.7 sq.m. Accordingly, 12.7/10 we get 1.27. Then we round up to the minimum power indicators existing on the market and get 1.5 kW.From this it is clear that for such an area a device with a power of 1500 watts is required.

IMPORTANT! The figures obtained (regardless of the method of calculation) should be rounded up.

Tips for using a wall-mounted fan heater

Before using for the first time and after completing the installation, the user should be aware of the following information:

1. If the heater is supposed to be used in a permanent mode, then it must be equipped with an automatic shutdown system in case of overheating and a thermostat;
2. If it is supposed to heat a small area of ​​\u200b\u200bthe office office, then powerful models should not be used - they will simply consume excess electricity;
3. It is worth remembering that one fan heater can only heat one room. You should not hope that warm air will wander through several rooms - until it reaches another room, it will simply cool;
4. It is not allowed to throw blankets or pillows on the wall-mounted device in order to quickly warm them up - this will disrupt the ventilation system of the device;
5. It is not allowed to install fan heaters in rooms with high humidity, for example, shower rooms and baths (however, models with this functionality have already been created);
6. Do not direct warm air onto plastic interior objects.

Strict adherence to these recommendations will allow the device to serve for a long time, save electricity costs, maintain overall functionality, and prevent accidents.

Difficulties of choice

Before buying, it is always necessary to determine the power and purpose of using a wall-mounted fan heater.For example, will the equipment need to operate as a simple fan in the future? If yes, then the model must have a special rotary mechanism. Further, the fan heater can be for domestic or industrial purposes. Despite the fact that their designs are the same - fan, housing, motor, heating element, but they have significant differences. Differences in technical characteristics and additional functionality will immediately catch your eye. For industrial models, all indicators will be increased significantly. They will obviously be superfluous if the device is supposed to be used in an office or domestic premises. But for large workshops or workshops, they are ideal. Especially their use will be relevant if the workshop is located in some kind of frame hangar, in which it is difficult to maintain warm air in the cold season.

Naturally, the first attention should be paid to the power indicator. It must be calculated according to the special formulas that were described above. The consequences of illiterate power selection can lead to the fact that the fan heater will be ineffective over a large area with its own low power, or vice versa, a too powerful model, heating small rooms, will significantly consume electricity, which implies unnecessary financial costs.

An industrial fan (also known as a fan coil, or a heat gun) is designed to heat large premises, for example, trading floors, large warehouses and garages, theater and concert halls. Industrial designs are characterized by high performance, their cases are made of high quality materials, they are designed to be invisible in the overall interior of a large room.Of course, the power they consume (depending on the heating area) cannot be compared with domestic ones. Therefore, using even several household models for industrial purposes is a wrong undertaking, because they simply will not cope with the entire air volume.

Rating of the best wall-mounted fan heaters for 2022

household models

4th place: Ballu BFH/W-102

This model has three control modes, it has a ceramic heating element inside, which guarantees the safety of operation. It also has overheating protection. Easily and quickly warms up to the specified temperature in rooms up to 10 square meters. Installation is intuitive and mechanically simple.

During operation, it does not emit unpleasant odors, it functions without unnecessary noise.

Due to wall mounting, it does not create inconvenience when people move, and a convenient remote control allows you to adjust the operation of the device without leaving the place of deployment. The recommended cost for retail chains is 3500 rubles.

• Easy installation;
• There is protection against overheating;
• Adequate cost;
• Warms up quickly;
• Controlled by remote control.

• The plastic case raises questions about durability;
• To prevent backlash, it requires a strong fixation in the workplace;
• When you first turn it on, it can “burn” the air a little.

3rd place: Electrolux EFH/W-7020

The manufacturer positions this device as "a powerful and compact assistant to central heating batteries in the cold season."It is characterized by comfortable and simple control, which allows you to set the exact temperature regime up to 1 degree, while creating an optimal microclimate in the room. In case of overheating, it immediately and automatically turns off. Thanks to the wall mount, it saves a lot of space in the room. It consumes relatively little energy, which has made it very popular among similar devices. During operation, it does not make noise, so you can safely turn it on even all night. On the case there are a timer and the inclusion of a ventilation mode. Light indication of the switched modes allows the user to easily control the device. The recommended cost for retail chains is 5600 rubles.

• Quality assembly;
• Nice external design;
• Reliable fixation;
• Does not dry out the air in the room;
• Adequate cost of the device.

• Warms up slowly.

2nd place: "Thermex Stels 2000E"

This sample is a stylish device at an affordable price with excellent technical characteristics. By itself, it is small in size, takes up little space on the wall, conveniently and firmly fixed. Warms up the room in a minimum amount of time, strictly maintains the set temperature. The screen has a stylish blue tint, displays all the necessary indicators. The device can be placed even in a children's room, because. it does not "dry" the air, does not have open heating elements, which indicates its complete safety. The curtain can be adjusted in any mode. The recommended cost for retail chains is 5100 rubles.

• High-quality assembly materials;
• The mounting plate is tightly fixed;
• Heating is fast;
• There are no foreign odors during operation.

• Somewhat noisy device;
• The body of the remote control is made of thin plastic;
• There is no control panel on the device itself;
• A bit uneconomical in terms of power consumption.

1st place: Stiebel Eltron CK 20 Trend

This is a reliable wall-mounted household fan heater with a powerful heating spiral element. The power of 2000 watts is enough for heating both small and large rooms. It does not require a large amount of electricity, and voltage drops in the mains are not terrible for him at all. The anti-freeze option allows you to adjust the minimum temperature and safely leave the device to work without external user control. The case has properties of moisture protection thanks to what the device can be used also in rooms with high humidity. When overheating, it turns off automatically. A dust filter is built into the housing. Manufacturer's warranty - 3 years. The recommended cost for retail chains is 13,000 rubles.

• Heats up the room quickly
• Can maintain temperature without human control;
• A light weight;
• Dimensions are small;
• There is a smooth adjustment of the degree of heating.

• Too high cost for a household appliance.

Industrial models (fan coil units and heat guns)

4th place: "Heat gun Teplomash, 2000W"

Teplomash Micro devices of the "Brilliant" 100 series are designed to protect window and door openings from 1 to 2 meters high, to heat tambour entrances, and to heat small industrial premises.Installation of the device is horizontal. The Brilliant appliances are made of galvanized steel with a white RAL 9003 polymer coating. Thanks to the top air suction technology, the front panels of the Brilliant air curtains remain clean. The recommended cost for retail chains is 5050 rubles.

• Simple construction;
• Sufficient volume of heated space;
• Easy installation.

• Narrow scope.

3rd place: "Teplomash fan heater KEV-34T3.5W2"

This fan heater of the TW series is designed for heating office, administrative, warehouse, retail, industrial and other premises. Mounting can be vertical or horizontal. The mounting bracket has adjustable swivel/tilt angles of the device, and adjustable louvers allow you to direct the airflow to a specific work area. Attention: the kit comes with a control panel with a screen and a remote control (similar to a TV remote control), which allows you to adjust the desired temperature in the room by means of a valve in two strokes or turning the fan on or off. The device has a degree of protection IP54, the power supply parameters are 220/50 V / Hz. The heat output (in kW) ranges from 4.2 to 18.1 kW. Air consumption (in m3/h) varies within 950-1450-1900. The recommended cost for retail chains is 24,000 rubles.

• Powerful device;
• Wide scope;
• Mounting position variability.

• Not detected.

2nd place: "SUMMER NOBO LE 318898825"

This powerful fan heater is designed for heating domestic or industrial premises. The device has a power of 2 kilowatts.The heating of the room occurs due to the movement of the air flow passing through the base part of the electrical appliance, inside which the heating element is located. The compact size of the device allows you to ergonomically fit the fan heater into the interior of any room. Body color is classic white. The device is made in Norway, the warranty is 10 years, the distributor in Russia is the LETO company. The device is mounted on the wall with a bracket. It can be mounted on legs (not included, purchased separately). The aluminum heating element is manufactured using the innovative ecoDesign technology, which is distinguished by an increased quality of work and safety. The device is equipped with protection against overheating, as well as sudden power surges. Protection class - IP24, which makes it possible to use it in wet areas. The recommended cost for retail chains is 28,600 rubles.

• Increased power;
• Possibility of use in damp rooms;
• Application of innovative technologies.

• Not detected.

1st place: "Teplomash KEV-6P3233E, 6000W"

This very powerful model differs from all the others in that it has top air suction, which ensures the cleanliness of the front panel. The fan heater is designed for heating office, administrative, commercial, warehouse, industrial and other premises. Installation only horizontal. The mounting bracket has angles of rotation and inclination of the fan heater, and adjustable shutters allow you to direct the air flow to the work area. The recommended cost for retail chains is 31,000 rubles.

• Large heating area;
• There are rotation angles on the mounting bracket;
• Wide scope of use.

• Too high cost.

Conclusion

Summing up, I would like to note that the quality of the purchased wall-mounted fan heater will directly depend not only on the working capabilities and method of generating heat, but also on the manufacturer. In order for the device to serve for a long time and not complicate the process of using warranty and post-warranty repairs, it is worth purchasing models of trusted brands that are responsible for the quality of production materials. They must take care that the plastic is low toxic, and the insulating materials are reliable (which is especially important when operating heating devices).