Rating of the best motorcycle raincoats for 2022

The key disadvantage of the motorcycle is that in bad weather conditions the motorcyclist will take on all their consequences. Driving in a downpour, in particular in autumn or spring, can hardly be attributed to the pleasures of riding a motorcycle.

At the same time, do not forget about the headwind. Ultimately, literally after 5 minutes, all the driver’s clothes will be completely wet, and in addition, a cold is guaranteed in the morning.

It is for these reasons that most motorcycle clothing companies produce motorcycle raincoats, and the ranking of the best for 2022 is presented in this article.

What is a motorcycle raincoat?

Based on the name, even a person who does not understand this subject will say that this type of equipment is necessary to protect the motorcycle rider from the rain. But not everyone knows that it also forms an auxiliary protection against wind and dirt.

A waterproof raincoat is worn over motorcycle equipment and forms an auxiliary safety barrier, thus not only protecting the human body from possible hypothermia, but also making it possible to keep the main layer of equipment intact.

Types of motorcycle raincoats

Raincoats for motorcyclists are membrane, conventional, one-piece and separate.

Membrane

In general, the membrane is a thin layer of polymers with many small through holes.

The number of holes gives them the ability to pass the molecules of steam and air, but water drops, even tiny ones, will not pass. Due to this, the membrane is called "breathable", since it releases sweat vapors to the outside, at the same time allowing fresh air to enter the body.

The advantages of a diaphragm raincoat in terms of convenience are obvious: it is much more pleasant to move dry, and not wet from the rain or, in the worst case, soaked through.

In addition, membrane motorcycle raincoats are lightweight and small in size when compared with rubber ones. Often they are made in such a way as to be worn as an ordinary windbreaker or jacket every day.

The membrane motorcycle raincoat guarantees good protection at speeds from 90 to 110 km/h.At higher speeds, water droplets may enter. The fact is that at high speed, the water pressure of raindrops during a collision is higher than the normal pressure of the water column intended for the membrane.

Ordinary

They are made so that the material is quite strong and does not let water through at all. Almost constantly, rubber materials or other polymers of similar quality are used to process the inner surface of a motorcycle raincoat.

This makes it possible to make a motorcycle raincoat quite thin and lightweight, but at the same time, water-resistant. The disadvantage of this product is that such materials do not pass not only water, but also air. In other words, do not "breathe".

This promises that in the rain, at a positive temperature, something like a “bath” appears under the product. At first glance, excellent protection from the rain, but from another point of view, the driver sweats, which makes him wet.

whole

Such products protect the driver from water as much as possible. They do not blow into the gap between the trousers and the jacket, but they are more difficult to put on and take off.

separate

Differ in the best compactness. In addition, they are much more convenient to put on and take off. There is a possibility, if there is a need, to use only a jacket or only trousers.

Experts recommend buying separate motorcycle raincoats when the rider mainly rides short distances. If the driver is a traveler, then you should consider buying a one-piece raincoat.Moving for a couple of hours on the motorway in the rain, the main thing is that the protection from wind and rain is of the highest quality, since on a long journey you need to rely solely on your own equipment.

Which option is better is, of course, up to motorcyclists to decide, but bikers are unanimous that a separate type of raincoat is much more comfortable than a solid one, and protects against water and wind in the same way.

Criteria for choosing a motorcycle raincoat

In order for the raincoat not to be a hindrance while riding and not to interfere with movement, and yet not become a source of discomfort, it is worth following the following criteria during the purchase:

• Separate or one-piece is the decision of the motorcyclist, however, experienced riders prefer separate because of maximum comfort;
• The material should not be too lightweight and too strong. Too lightweight material is short-lived under the influence of a headwind flow, and therefore will be an acquisition for one season. At the same time, too strong material makes the equipment heavy and uncomfortable;
• A jacket or the upper part of a piece-suit must necessarily have a large collar "under the throat" and a lightweight hood that is worn under helmet;
• There must be a valve on the surface of the zipper, which is fastened with buttons;
• It is worth giving preference to a mesh lining. Although it complicates putting on / taking off equipment, it improves ventilation. With a solid lining, the evaporation process will begin very quickly from normal body temperature;

• It is worth giving preference to catchy products: yellow, orange and rich red. Do not forget about the presence of reflective inserts.Since the view is very limited during the rain, they certainly will not interfere;
• The classic look of waist-length trousers is not the best choice. If the driver gets into a large puddle or falls, the water will get inside. In this regard, the trousers should reach the middle of the chest, and the fastener is on the side so that the trousers can be easily removed;
• At the ends of the sleeves, trousers and at the bottom of the jacket, there must be tightening elastic bands. Experts recommend purchasing a motorcycle raincoat with auxiliary Velcro.

This is an indicative list of recommendations on how to choose a quality product that will keep an impeccable look for a couple of seasons. If the budget is excessively limited, an ordinary OZK will also be a good option. It is also made for tougher and more dangerous environments, but it will be uncomfortable to ride in it.

Buying unknown models from China is also not recommended. The fact is that the fabrics in their products are excessively light, which is why at a speed of 80 to 100 km / h they will be torn apart by the wind in about half an hour.

The best motorcycle raincoats

Such suits are now in the catalogs of almost all leading manufacturers of motorcycle equipment. The choice is incredibly huge, so getting confused in it is not difficult. It is for this reason that the most common models of motorcycle raincoats that are in Russia are presented below.

10th place: INFLAME RAIN CLASSIC KIT WOMAN

100% made for women, taking into account the distinctive features of their figure and according to all standards of waterproof clothing. In addition to the visual effect and visibility from a distance of more than half a kilometer, this kit will protect the bike fan in heavy rain.

The Velcro structure and the drawstring at the waist allow the raincoat to be most precisely fitted to the figure and guarantee absolute protection against wind and rain.

Average price - 4 500 ₽

• The material of the outer layer is presented in the form of 100% polyester;
• Impervious seams that are taped from the inside;
• High quality and pleasant to the body lining;
• The mechanism of contraction for regulation on a figure;
• Reflective inserts on legs and back.

• Not detected.

9th place: IXS ORCA EVO

Swiss company IXS has been developing and manufacturing motorcycle equipment for three decades. There are a number of raincoat solutions in the IXS line, and most of them are one-piece models. One of the most budgetary is ORCA EVO.

Such a suit looks simple, in particular, black. But there are more positive solutions with yellow and red inserts.

The ORCA EVO raincoat is made of 190T nylon fibers coated with polyurethane. There are reflectors in the back and chest area. The upper part of the raincoat is equipped with a lining. Sizes within XS-5XL.

Average price - 3 400 ₽

• resistance to moisture;
• High-quality protection;
• Suitable for tourism;
• Made from a very lightweight and water resistant 70 denier nylon;
• Comfortable and long Velcro flap closure makes it easy to put on/take off the overalls.

• Not detected.

8th place: HYPERLOOK TITAN

HYPERLOOK TITAN is a lightweight, durable, comfortable and split raincoat that is an indispensable companion for hiking or city trips.The product is made of durable materials such as PVC, all seams are taped with heat-insulating tape. In addition, the raincoat has ventilation holes for the movement of air in the area of ​​​​the blades.

The HYPERLOOK TITAN raincoat is thought out to the smallest detail: black material, reinforced fibers, adjustable loops on the shoulders and hands, elastic band adjustment along the length of the boot, reflectors and the HYPERLOOK trademark on the back.

All this together increases the driver's passive security while driving at night. However, the key distinguishing feature of the HYPERLOOK TITAN raincoat is that it has the ability to fasten the jacket to the trousers.

The HYPERLOOK TITAN rain cover keeps the rider warm and comfortable, plus the suit stays clean after any rain.

Average price - 5 000 ₽

• Made from durable materials such as PVC;
• High rates of vapor and water permeability;
• Reinforced fiber inserts;
• Correction loops on the forearm and hand;
• Elastic adjustment along the length of the boot.

• The pockets are not well thought out.

7th place: ALPINESTARS HURRICANE RAIN SUIT

The HURRICANE RAIN One-Piece Raincoat is similar in functionality to the HURRICANE One-Piece Suit and is also made from ultra-fine nylon fibers with a polyurethane coating that does not stick to the main suit no matter what material it is made from.

For convenience, the lining in the form of a mesh, which provides air movement, has become responsible. Just one drawback that confuses some motorcyclists is the difficulty of putting on a raincoat.On the other hand, one-piece models tend to hold up better in downpours and provide better protection from gusty winds when compared to separate kits.

Average price - 8 600 ₽

• Made from ultra-thin high-quality materials;
• Sealed waterproofing seams;
• Mesh lining for comfort and breathability;
• Comfortable fastener on the belt, which makes it easy to put on / take off the suit;
• Soft and at the same time hermetic cuffs on shins and sleeves.

• Difficult to dress.

6th place: PROUD TO RIDE

A separate type suit (jacket, pants, gloves and shoe covers) will be indispensable if the weather conditions deteriorate sharply. The raincoat is made of light and water-resistant materials. When folded, it is very compact, which makes it easy to transport.

Average price - 4 200 ₽

• Large rain boot covers with solid rubber soles;
• All seams are taped for maximum moisture resistance;
• Large collar protects the rider's neck from rain and wind;
• Waterproof fastener;
• Reflectors on the sleeves.

• Not detected.

5th place: ALPINESTARS HURRICANE

Fans of the well-known brand ALPINESTARS from Italy also have something to buy. The most practical option is the HURRICANE split-type set, which includes a jacket and pants, available for purchase separately.

The jacket is made of ultra-fine waterproof fibers coated with polynylon. It features sealed seams that form an unbeatable water barrier, adjustable waist and waterproof pockets.

The rain cover comes in a single color black and a two tone yellow/black design. Pants are produced exclusively in black with reflectors. Each piece of clothing comes with a branded bag for transportation and storage.

Average price - 5 500 ₽

• Made from ultra-thin waterproof fibers coated with polynylon;
• Sealed seams;
• Adjustable waist;
• Waterproof pocket.

• Not detected.

4th place: STARKSLIGHT RAIN

Partially membrane rain cover for ultimate visibility in adverse weather conditions. The model was made as a compromise between cost and quality.

Average price - 5 500 ₽

• Inserts from a fashionable Belgian-made membrane;
• Resistance to negative temperatures up to -40 degrees;
• Excellent protection from external moisture, at the same time, the membrane regulates the climate inside;
• The membrane is designed for a large amount of steam removal, which prevents the body from sweating;
• A catchy and safe yellow color for a bad climate.

• Not detected.

3rd place: DRAGON FLY EVO

A split-type raincoat with a specialized cut that is designed for a comfortable fit on the bike and long-term riding.

The kit comes in yellow. In general, there is also a black version, however, catchy tones are preferable for a product of this kind, since they play the role of auxiliary security.

In terms of functionality and structure of the top layer (nylon fibers with hydrophobic impregnation based on Teflon), FLY EVO is similar to the leader of this rating. Of the useful distinguishing features, it is worth first of all to highlight the lightness - only 1 kg.

The raincoat has an internal pocket with quick access and an auxiliary "stuff compartment" in the trousers with a water-repellent flap. In addition, the creators have provided a comfortable concept of tightening the jacket so that it does not bulge and turn into a “sail” during the ride.

Average price - 7 900 ₽

• Reliable protection against negative temperatures;
• High quality workmanship;
• Fibers of a catchy warning tone;
• Quality breathable membrane inserts with Teflon finish.

• Not detected.

2nd place: INFLAME RAINT JOINT

The one-piece INFLAME RAINT JOINT raincoat is made of OXFORD-type polymer fibers with an auxiliary PVC coating, which guarantees an excellent degree of protection from rain and wind.

The structure of this kit provides for the location of the PVC layer between the lining and the outer material, which makes it possible to protect it to the greatest extent from mechanical damage.

In addition, this look allows you to reduce the level of planting of the fabric in the process of getting wet and increases the durability of the raincoat. The successful layout of the suit makes it possible to quickly and conveniently put it on top of the main equipment.

The front clasp is equipped with a twofold waterproof valve. The belt, collar and sleeve cuffs of the jacket are made in the form of puffs-clamps with Velcro zippers (with Velcro).

This look makes it possible to perfectly fit the set to the figure and guarantees maximum protection from wind and rain. There are reflective inserts.

Average price - 3 300 ₽

• Excellent tightness;
• Sealed seams that are taped from the inside;
• High-quality and pleasant to the touch lining;
• Belt for regulation on a figure;
• Reflective inserts on trousers and back.

• Not detected.

1st place: DRAGON FLY QUAD

The Russian manufacturer of motorcycle equipment DRAGON FLY offers a suit that consists of a diaphragm jacket and QUAD pants, available for purchase separately.

The upper comes in black-orange and black-green and is made of nylon fabrics with a Teflon-based hydrophobic impregnation. The set has hermetic seams and moisture resistant fasteners.

There is ventilation of the back and armpits, and in general, effective heat dissipation. From the side of convenience, everything is also good: the jacket has 2 inside pockets and 4 outside ones.

Pants QUAD have the same parameters and are adjusted to the figure by adjusting the suspenders and waist. In addition, they have an extension for dressing shoes.

Average price - 5 500 ₽

• Made of nylon materials with hydrophobic impregnation on a Teflon basis;
• Sealed seams;
• Waterproof fasteners;
• Ventilation of the back and armpits;
• Existence of internal and external pockets.

• Not detected.

In conclusion, it is worth noting that raincoats are used not only in bad weather conditions, but also on off-road trips. If a motorcyclist has a road through water barriers, then such equipment will simplify the fate of the driver and protect the main suit from water.