Ranking the best patient monitors for 2022

In the intensive care unit, operating room, as well as in intensive care units, the patient's vital signs should be monitored. This requires precise and reliable equipment. For continuous monitoring of the patient's condition, a patient monitor is required.

What is a patient monitor

The patient monitor is a high-tech device that helps to monitor changes in one or more parameters of an operated person or a seriously ill patient.It can also be used to evaluate the effects of anesthesia, artificial ventilation of the lungs and monitor during the provision of emergency care. This device helps to carry out early diagnosis of complications during ventilation or anesthesia, this enables doctors to take action and resolve the issue until the patient's condition has reached a critical state.

The patient monitor consists of the monitor itself and the measuring units. Measuring blocks are used to collect information and then display indicators. Monitors differ in their sizes, the amount of information that will be visible on the screen will depend on this parameter. Devices that are designed to perform quick operations with the interface have a touch screen. Modern devices are suitable for monitoring people of all ages - from newborns to the elderly. Due to the fact that many devices are combined here, the doctor can easily control all patient parameters. So devices can have a built-in battery, pressure sensors, measure pulse, body temperature, measure the pharmacological dose, and even have a thermal printer.

Types of patient monitors

This medical equipment can be classified according to several parameters. First of all, they should be divided into three large groups: bedside, transport and operating rooms.

Bedside devices are used in intensive care units, hospitals and intensive care units. With their help, the great value of graphic channels is displayed, and, depending on the institution, they can be supplemented with additional blocks or modules. Also, such monitors can be divided into two groups: modular and monoblock.The first option comes with various measuring units, which can be changed or supplemented during use. Depending on the specific situation, they can be configured to solve certain tasks. For this reason, they have a higher cost and a larger size. Monoblock devices are smaller and cheaper than modular devices. The tasks that the device can handle are laid down during assembly and cannot be changed in the future. If necessary, it will be impossible to change the functionality of the device, because of this they are cheaper and have a compact size. So bedside devices differ not only in price and dimensions, but also in accuracy, breadth of measurements, range and sensitivity. The main capabilities of such devices are the measurement of blood pressure, pulse, breathing rate, blood oxygen saturation, as well as the detection of arrhythmias. Information will be displayed on the monitor depending on its initial settings, in addition, it is possible to hide information that is unnecessary at the moment. Devices that are used in intensive care units have the ability to synchronize with a defibrillator. This allows you to monitor the patient's condition during the use of the discharge, as well as receive data on the settings of the defibrillator.

Transport models are used in ambulances. They are portable devices that can operate both from the battery and the on-board network. With their help, doctors can monitor the main vital signs of the patient: blood pressure, respiratory rate and pulse rate, the occurrence of arrhythmia. Such equipment requires greater reliability and durability.In addition, transport devices must have vibration protection, water resistance, the ability to suppress extraneous noise, work in various temperature conditions and transmit data to other devices. With their help, the patient is provided with the necessary assistance in transporting him to the medical facility and eliminating any complications along the way.

Specialized monitors are used in operating rooms. With their help, doctors can not only monitor the patient's vital signs, but also the level of anesthesia exposure. Such devices control the amount of anesthetic gases, which allows it to be economically consumed.

Criterias of choice

This medical equipment is an important part of any clinic. To date, more than a dozen companies are engaged in the production of patient monitors, and each of these equipment deserves the attention of doctors, because they all have their own characteristics that must be considered when buying.

Considering inexpensive options, you can see that their functionality allows you to track only the most important vital signs. And in the future it will be impossible to expand the possibilities of technology. Expensive options are suitable for certain departments, their functionality can be expanded. Therefore, before buying, you should think about which functionality will be more in demand. Usually, more attention is paid to blood pressure, pulse and respiration rates, as well as ECG. For this reason, it may be appropriate to install several monitors with limited functions in the room. But this option is not suitable for children's resuscitation or during the control of a patient in a very serious condition.

In addition, you should pay attention to other selection options. The most important criterion should be durability and reliability. After all, this equipment will be used continuously. At the same time, it will reflect all the important changes taking place in the body. There are models on sale that can work for several days and fail. And this will be reflected in the vital signs of the patient, and may even lead to premature death. Therefore, preference should be given not only to a trusted manufacturer, but also to a reliable store. An unreliable seller can sell a fake that is very similar to the original at a low cost.

Since this monitor will monitor all vital signs, special attention should be paid to the accuracy of the device. A reliable manufacturer in its equipment uses only high-quality parts that will not cause doubts when taking indicators. Incorrect reading of indicators can lead to death, because in this case, doctors will make an incorrect diagnosis and perform inappropriate manipulations.

Also, to ensure the reliability of the device, it should be tested in extreme situations. Indicators should not change in the presence of vibration, temperature changes or atmospheric pressure.

Do not forget about the design of the equipment. And now we are not talking about the beauty of the device. No, it should be compact and self-contained. The ergonomic design makes it easy to transport the patient without disconnecting the equipment from one department to another or from the operating room to the ward. At the same time, it is impossible to turn off the device; constant monitoring of vital signs should be carried out.

Consumables and accessories for the monitor must be available. This includes sensors, special printer paper, calibration gas, and other necessary supplies. If these elements are not available for sale, then buying a monitor from this manufacturer does not make sense.

In addition, in order not to make a mistake with the purchase, it is better to visit medical forums. There you will have the opportunity to get real reviews from experts and be confident in your purchase.

Best Inexpensive Patient Monitors

Armed PC-900s

This model is a multifunctional bedside monitor. With it, you can determine and calculate the heart rate, the level of blood oxygen saturation. This data will be displayed on the LCD monitor, and SpO2 curves will also be displayed there. To make the control comfortable, the manufacturer has provided convenient buttons and bright light indication. To avoid errors in the operation of the device, there is an alarm system that is triggered when they occur.

Before using the device, you must select one of the age groups: newborn, child or adult. In addition, "Armed PC-900s" has a memory function. It can store up to 300 recent measurements or the last hundred patients, which is very convenient for comparing patient status.

"Armed PC-900s" can work both from the network and with the help of a battery. The size of the device is 18 * 28 * 20 cm, and its weight is 3.4 kg. The average cost is 45,000 rubles.

• Ability to work from the network and battery;
• Convenient management;
• The presence of memory;
• Choosing the age category of the patient;
• Operation error signal.
• Compact size.

• Little functionality.

Dixon Storm 5300

This model of medical equipment can be used in various departments of the clinic, it can be used to monitor the condition of both an adult patient and a child or newborn.

"Dixon Storm 5300" has a 5.7-inch LCD screen. The screen simultaneously displays the curves and numerical indicators of the required parameters. Also, for the convenience of the patient, the manufacturer has provided a button to call a nurse. To record the results obtained, there is a built-in memory, as well as data can be saved to a flash card.

"Dixon Storm 5300" can operate from the mains and from the built-in battery. The capacity of the accumulator allows the device to work within 4 hours. This device can be mounted on a wall with the ability to rotate the screen, as well as mounted on a stand. The manufacturer has provided several types of device configuration. At the request of the buyer, it is possible to make a complete set for a newborn, as well as add a module for measuring body temperature. In addition, there is a built-in thermal printer.

Dixon Storm 5300 measures 17.4*23.5*18.9 cm and weighs less than 3.5 kg with battery.

The average cost is 43,000 rubles.

• Choosing the age category of the patient;
• Possibility to work from the accumulator;
• Various mounting options;
• Screen backlight control;
• Small dimensions and weight.

• Not detected.

Dixon Storm 5600-01

A distinctive feature of "Dixon Storm 5600-01" is a large screen size, which can simultaneously display up to seven curves at the same time. All displayed parameters are quite bright, which allows you to take readings from any angle.

With the help of "Dixon Storm 5600-01" you can monitor the patient's breathing rate, measure the pulse, do an ECG, control the level of oxygen in the blood. In addition, the device allows you to control NIBP, cardiac output, body temperature, IBP, capnometry. There is a gas module that allows you to control the level of anesthetic gases. It shows the amount of gas on inhalation and exhalation, which will be very useful for anesthesia.

"Dixon Storm 5600-01" can work both from the mains and from the battery. A full charge of the battery will last for 4.5 hours of operation of the device. Also, the device is equipped with indicators that show battery charge, mains power and alarm. There is also an audible alarm. For the convenience of the patient, there is a "nurse call" function.

The average cost is 75,000 rubles.

• Rugged housing;
• Big screen;
• Functional;
• Ability to switch from bed to bed.

• The information is only kept for 4 days.

Best mid-range patient monitors

Armed PC-900f

With the help of "Armed PC-900f" you can monitor such vital signs as blood pressure, heart rate, body temperature, blood oxygen saturation, respiratory rate and others.

This model has a large screen and simple operation. All necessary buttons are located on the front of the device. All indicators displayed on the screen are displayed in real time. In addition, up to 12 main parameters can be observed on the screen at the same time. By means of "Armed PC-900f" it is possible to carry out monitoring of an electrocardiogram, at the same time there is an opportunity to select certain assignments.

The device is equipped with audible alarms.It is possible to set a certain value of indicators, and when they are exceeded, there will be a sound notification as an alarm. There is also a pulse beep. Memory "Armed PC-900f" allows you to save up to 400 of the last indicators. The operation of the defibrillator and electrosurgical equipment does not affect the operation of the device, which makes it possible to use it in the operating room.

The size of "Armed PC-900f" is 27*32*15 cm, while the screen has a diagonal of 31 cm. The weight of the device is 5.8 kg. "Armed PC-900f" can work from the mains or from the built-in battery. When the battery is low, a special icon and light indication will appear on the screen.

The average cost is 95,000 rubles.

• Suitable for any age group;
• Large screen size;
• Memory;
• Display of up to 12 indicators.

• The battery charge is only enough for 2 hours of operation.

MITAR-01-R-D

With the help of "MITAR-01-R-D" you can monitor five vital signs of the patient: ECG, blood pressure, body temperature, SpO2, PG. This device can be used in intensive care, operating room, intensive care units, as well as in ambulances.

The screen "MITAR-01-R-D" has a diagonal of 10.4 inches, its brightness will change automatically depending on the level of lighting in the room. Which is very convenient for taking indicators. Up to 9 curves can be displayed on the screen, it is also possible to output curves to any place on the screen. The device has the ability to configure up to 10 user modes with their subsequent storage in memory. Also, the memory of "MITAR-01-R-D" allows you to save up to a hundred events.In addition, alarm events and the presence of arrhythmia can be saved manually or automatically. "MITAR-01-R-D" has calculators for drug doses, ventilation, oxygenation, hemodynamics and kidney function.

The size of "MITAR-01-R-D" is 27.6 * 16 * 25.5 cm, and the weight without additional accessories is 3.6 kg. The device can be powered by mains or battery.

The average cost is 108,000 rubles.

• Screen size;
• Automatic backlight adjustment;
• Can be used in operating rooms, ambulances and intensive care units;
• Availability of calculators.

• No thermal printer.

Best Premium Patient Monitors

IMEC 8 MINDRAY

This device is intended for use in intensive care units and intensive care units. "IMEC 8 MINDRAY" allows you to measure the respiratory rate, ECG, blood pressure, heart rate, SpO2. The device detects a change in heart rate, calculates the dosage of drugs, and in addition, it works with the indicators of the 3T segment.

During operation, IMEC 8 MINDRAY records and sorts the indicators, so it is easier for a specialist to observe the dynamics of treatment and make adjustments to treatment.

The design of the device is convenient to use and transport. It has a foldable handle that makes it easy to move the device from place to place. Also during operation, it consumes much less energy, which will not only save power consumption, but also extend battery life.

"IMEC 8 MINDRAY" has a touch screen with a diagonal of 8.4 inches. The manufacturer has provided an indication of power, battery charge, as well as an alarm.

The average cost is 160,000 rubles.

• Touch screen;
• Calculates the dosage of the drug;
• Economical energy consumption;
• Design.

• Not detected.

BeneView T1 Mindray

This model is a modern mobile and multifunctional device that has the ability to monitor vital signs even in emergency conditions. It can be used both in intensive care units, operating rooms, intensive care units, and in ambulances. The main feature of "BeneView T1 Mindray" is the ability to exchange data.

The screen has a diagonal "BeneView T1 Mindray" 19 inches and touch control. There is a synchronization mode that allows the device to connect to other bedside devices and monitor from the nurse's station. BeneView T1 Mindray also has a special handle that can be used to transport the device and as an adapter. The device can store the received data in the form of tables and graphs for 5 days.

"BeneView T1 Mindray" works from a network and from the accumulator. A full charge of the battery lasts for 5 hours of continuous operation.

The average cost is 175,000 rubles.

• Works in emergency conditions;
• Large screen with touch control;
• Can be used as a central station;
• Battery capacity.

• High price.

IMEC 12 Mindray

Such a device allows you to monitor all important indicators of the patient's life. The screen of the device has a diagonal of 12 inches and touch control. Up to 8 curves can be displayed on the screen at the same time. There is also a built-in three-channel thermal printer. Data transfer from the device is carried out via a USB port or via Wi-Fi.

The IMEC 12 Mindray memory can store 1000 blood pressure measurements, 100 alarm events, wave measurements will be stored for two days, and tabular and graphical trends for five.

"IMEC 12 Mindray" has shortcut buttons through which simple control of the device is carried out. The monitor has an ergonomic design and light weight, which makes it easy to carry and transport the product.

The average cost is 240,000 rubles.

• Instant reaction to the slightest changes in vital signs;
• Ability to copy data from one to another device;
• Simple control;
• Low energy consumption;
• Up to 4 hours of battery life.

• High price;
• Hard to find for sale.

Conclusion

Any healthcare facility should have a patient monitor. With its help, it will be possible to better control the health of a sick person, especially if he is in critical condition. Also, with their help, it will be easier to make a correction of the therapy. The higher the cost of such equipment, the more opportunities a specialist will receive. In addition, high-quality products will give an instant response at the slightest change in performance. The high quality of the models presented in the rating is beyond doubt. Their production is carried out by companies that have been proven over the years, which give a long warranty on the device.