Ranking the best work shoes for 2022

At the construction site, production, employees of medical organizations, as well as employees of the food industry, not only special clothing, but also shoes should be available. Shoes here will serve as a means of individual protection, as well as create convenience during work. With the help of such shoes, the feet of workers will be protected from moisture, shock, and in the cold season they will help to keep warm. Therefore, there are special requirements for special footwear. But each industry has its own characteristics, so manufacturers use certain characteristics to produce this product.

What are safety shoes made of?

In most cases, for the production of work shoes, leather with combined tanning is used. It is made from the skin of cattle, as well as from the skin of a pig, horse or deer. It is called yuft or yuht. Although such models do not look very beautiful, they have high strength, as well as environmental friendliness. Such shoes are mainly used for outdoor work or in production with an aggressive environment. Products of a more aesthetic appearance are made of chrome leather, but such models are very expensive. In addition, split leather models are widely used due to their affordable price.

Artificial leather is also used for the production of work shoes. But in terms of quality and characteristics, it is inferior to models made of genuine leather. For this reason, most manufacturers use it only for certain items, and not all shoes. But faux leather options are still widespread among consumers due to their affordable cost.

In the manufacture of the sole, various materials are used, their choice depends on the industry for which this model is intended. Nitrile soles can withstand a wide range of temperatures, both low and high. They are also wear-resistant, do not require special care, do not react with aggressive substances and have good adhesion to the ground. But the production of such a sole has a high cost and requires certain nuances. Polyurethane soles are also common among manufacturers.Their advantages include low cost, light weight, durability and practicality. But polyurethane soles are quite sensitive to temperature changes, are exposed to fungus, do not have durability and can slip. Polyvinyl chloride soles are heavy, do not tolerate temperature changes, and are also not resistant to aggressive substances, but they are easy to manufacture. Thermoplastic soles showed good wear resistance. In addition, they adhere well to the soil, do not slip, withstand temperature extremes from -100 degrees to +100 degrees. And their disadvantages include that they cannot come into contact with gasoline or oils.

If we talk about models intended for operation in the winter or spring-autumn period, then a heater should be used here. Usually synthetic materials or fur are used for this purpose. Fur can be both natural and artificial. The natural version does its job best, but its price is much higher than that of faux fur or synthetic material.

Types of work shoes

Such personal protective equipment can be classified according to several criteria. First of all, it is divided by its appearance. Here you can make a division into boots, boots, sandals or clogs. The next criterion for dividing models depends on the purpose. Such shoes can protect against falling heavy objects, electric shock, create protection from moisture, chemicals, temperature extremes, fire and prevent slipping. Shoes are also divided according to the method of manufacture. It can be rubber, molded, nail or for work in special rooms.

Each of the models has its own unique features that are necessary in a particular field of activity. For example, if we talk about boots, they are made of very durable materials to protect the foot from falling heavy objects, but along with this, they also should not come into contact with an aggressive environment. Medical workers need light shoes and sandals that meet sanitary requirements and standards. For this reason, they are made in light colors so that any contamination is immediately visible.

If we talk about production methods, then models made by injection molding have their own secret in the firmware of the sole. This method of production is quite complicated, but the shoes are resistant to low temperatures, will not slip in the winter season, and will also have good wear resistance. To get light and comfortable shoes, the bead stitching method is used. Such shoes will be comfortable for long walks, as well as for standing work. And due to the fact that nails are not used here, it will become an excellent protector from electric shock.

Special sneakers have become widespread among workers. They are lightweight and have good ventilation, which leather models cannot provide. Unlike conventional sneakers, these options have a double sole, and polyurethane is used for the manufacture of treads. To protect the top of the foot, natural or artificial leather is used.

There are also waterproof shoes that are in demand by car wash workers or sailors, as well as in the chemical industry. Such models will give the feet warmth and dryness.Initially, such models were presented in the form of tarpaulin boots, but now polyvinyl chloride and polyurethane are used for their production. In addition, such shoes are resistant to frost, and can retain their properties at temperatures up to -30 degrees.

Safety shoes can also be classified according to seasons. Demi-season options are suitable for operation at moderate ambient temperatures. They must also be waterproof, and if necessary, be protected from fire, chemicals, etc. Winter options for working outdoors or in rooms with low temperatures. They must keep warm so that a person does not get hypothermia.

How to choose the right footwear

The choice of safety shoes should be approached with special care, since it will have to be a full-time job. Therefore, first of all, you should pay attention to comfort and convenience. To do this, pay attention to the block, it must be ergonomically shaped. So it will be convenient not only to stay in it for several hours, but also there will be no pain during long walking. It also needs to be accurate in size. If there is free space, then the shoes will begin to rub the legs, which will cause pain and discomfort.

Do not forget to pay attention to the material of manufacture. High-quality shoes will be made from natural and durable materials. The thickness of the sole and the strength of the seams play an important role. Protection from moisture, comfort when walking and reliability will depend on this. For work at low or moderate temperatures, it is better to choose models with a thicker sole, so it will be possible to retain more heat. Also, a thick sole will not create discomfort when walking on a surface that has irregularities.

There are also some points that will depend on the type of activity of the worker. For example, the presence of a metal toe will protect the toes from being hit or dropped by a heavy object. It is also worth noting that models with protective elements are being tested.

Well, do not forget about the formal requirements. For each specialty, a specific model is produced. And even if certain models have external similarities, they cannot be worn by an employee of a different specialty. For example, a security guard cannot wear boots designed for mining workers, even if they are more comfortable and functional.

Care rules

When purchasing even the most expensive and high-quality pair of boots, one must not forget about the rules for care and storage. Otherwise, none of the shoes will be able to last for a long time.

First, you always need to clean the dirt. It has a detrimental effect on both natural and artificial leather. And in some materials it can even be absorbed and leave stains if it is not cleaned in time. Do not use solvents for cleaning either. Once or twice a week, products should be treated with special products (oils or creams).

If shoes and boots get wet, then they should not be dried on the heater itself, but at a distance of a meter from it. With constant drying near a heat source, shoes will quickly become unusable. When drying dried products, the temperature should not exceed 40 degrees.

So that destructive processes do not begin to occur in the materials of the product, it is necessary to store in dry rooms that do not have a source of moisture. Also, the temperature regime must be observed. High and low temperatures during storage will have a detrimental effect on the material, whether artificial or natural.Constant exposure to direct sunlight will cause rapid aging of fabric or artificial leather products. When storing leather products, dust must not be allowed to fall. Since it will simply absorb into the surface, which will then spoil the appearance.

The best work boots and low shoes

Sura Profi PU M51

This model is intended for work on the street and in a production room in the autumn-spring period. The upper part of the "Sura Profi PU M51" is made of leather, and for the lining, the manufacturer used a synthetic material that has a porous structure. The sole is made of a single layer of polyurethane, which is resistant to wear and has cushioning. The outsole also has a tread to prevent slipping. The tongue of these boots is a deaf valve. With its help, dirt and dust will not get inside during operation. There is also a soft insole, with the help of which the load will be evenly distributed over the entire foot. It is worth noting the shape of the shoe, it is made in such a way that throughout the day the feet will not experience stress and fatigue. To protect the toe of the foot, the manufacturer installed a toe cap made of thermoplastic material.

The average cost is 1100 rubles.

• Convenient block;
• Breathable lining;
• Wear-resistant outsole;
• There is additional protection for the toe of the foot.

• Hard to find small sizes.

Basic PU MP

With such boots you can work in the cold season on the street or indoors. The upper part of the boots is made of yuft, and inside there is a faux fur lining. The sole "Basic PU MP" is made of polyurethane, which is resistant to wear.There is also a protector that will not allow the boots to slip and create protection from an aggressive environment. The design of the tongue will create reliable protection against moisture, dust or dirt. The “Basic PU MP” block has an ergonomic shape, so even with prolonged wear, the legs will not experience discomfort and fatigue. The toe cap is made of metal, which creates a reliable protection of the toe area from mechanical impact.

The average cost is 1600 rubles.

• Suitable for work in the cold season;
• Not slippery sole;
• Soft insole;
• Metal tray.

• Not detected.

Styer PU/TPU

This model is low shoes that can be used in the summer. A special feature of Stayer PU/TPU is a two-layer sole, which is resistant to petroleum products, oils, acids and alkalis.

For the top of such low shoes, the manufacturer used the vamp material, and for the heel, natural leather. The tongue is made in the form of a deaf valve, artificial leather and polyurethane were used for it. The inside has a 3D mesh lining for added comfort. The PU/TPU Stayer laces are made of nylon, while the eyelets and hooks are made of metal. Thanks to this, lacing the boots will not take much time. It is also worth noting the presence of reflective elements, which will be very useful in conditions of poor visibility.

The average cost is 1500 rubles.

• Double layer sole;
• The sole has an injection molding;
• Convenience;
• The presence of reflective details.

• Not detected.

The best work boots

Sura Lux PU/TPU M60

These can be used for both outdoor and indoor use. For the shaft, the manufacturer used a tarpaulin, and the width of the shaft can also be adjusted. The lower part of "Sura Luxe PU/TPU M60" is made of genuine leather. The sole is lightweight, has good cushioning and does not slip, thanks to the tread. Inside there is a removable soft insole, which allows you to evenly distribute the load over the entire foot. The block has an ergonomic shape, now the legs will not experience fatigue and discomfort after a long day at work. To protect the toe area from mechanical stress, the manufacturer installed a toe cap made of thermoplastic material.

The average cost is 1750 rubles.

• Quality materials;
• The sole is resistant to wear;
• The shape of the block will not let your feet get tired;
• Soft insole.

• Not suitable for work in the cold season.

Leader PU/TPU Talan

For the production of such boots, artificial and natural materials were used. The top has a height from the floor of about 27 cm, it is made of genuine leather. Also, the size of the top can be adjusted with a buckle. For work in poor visibility, there are reflective details on the top of the boot. The two-layer sole is made of polyurethane, resistant to chemicals, oils and petroleum products. The main insole "Leader PU/TPU Talan" is made of strobe material. There is also an insole that is made of foam material, which makes it comfortable to wear. A rigid metal toe cap is able to create protection against mechanical impact.

The average cost is 1500 rubles.

• The block has an anatomical shape;
• Reflective details;
• Faux fur lining;
• The ability to adjust the width of the top.

• Some stores sell this model at an inflated price.

The best work sandals and clogs

Scorpion-Premium

A feature of this model is the absence of metal elements. Therefore, they can be used by workers in the energy industry. For the upper part of the sandals, the manufacturer used genuine leather with a thickness of 1.8-2.2 mm. Also, the finishing of modern materials is used here, which provide an aesthetic appearance of the shoe and reduce its weight, as well as create a protective function. "Scorpion-Premium" has a two-layer sole, which is resistant to oils, petroleum products, acids and alkalis. Due to the presence of an intermediate layer, sandals have lightness and cushioning when walking. There is a perforation that creates ventilation and comfort in the hot season. The Scorpion-Premium toe cap is made of polycarbonate, which will protect the legs from mechanical stress. Reliable fixation on the foot will be created by Velcro tapes.

The average cost is 1750 rubles.

• Do not have metal elements;
• Comfortable sole;
• No laces;
• Polycarbonate toe.

• After a certain time, the belts are poorly fixed.

Norfin Journey BL

These sandals will be the best option for long walks, as they combine the lightness of summer shoes and the comfort of boots. "Norfin Journey BL" are made of synthetic material that does not require special care and dries quickly after washing.Also, this material is resistant to wear, which will allow you to use the product for a long time. The sock "Norfin Journey BL" has a closed type, which will create protection for the toes. The sole is made of rubber and EVA material, thanks to which long walking will not cause fatigue and discomfort. For added convenience, there are elastic ties and the ability to adjust the back strap according to the volume.

The average cost is 2900 rubles.

• Convenience;
• Easy care;
• The material dries quickly.

• High price.

Clog MED002

This model is a white clog made of genuine leather. "Clogs MED002" can be used by medical workers, service workers, as well as used for daily wear. There is a strap at the top that can be adjusted to fit. It can be used in two positions: to act as a backdrop or as a decorative element on the top of the clog. The block is wide enough that will not allow the foot to get tired when wearing the clog for a long time. The sole is made of polyvinyl chloride, it is elastic and resistant to wear.

The average cost is 820 rubles.

• There is a perforation;
• Comfort when wearing;
• Easy cleaning.

• Not detected.

Conclusion

Choosing high-quality shoes, it turns out that you can get not only comfort when wearing, but also get rid of various foot diseases. Work shoes must meet all the requirements of the organization of work. Otherwise, you can easily get injured, which can be detrimental to your career.