Content

  1. Story
  2. General advantages
  3. Products
  4. Where could I buy
  5. The best Tohatsu outboard motors
Rating of the best Tohatsu outboard motors for 2022

Rating of the best Tohatsu outboard motors for 2022

Fans of fishing and outdoor activities on the water are well aware that choosing the right outboard motor is a very difficult task. Depending on the planned use, it is necessary to determine the type and power of the engine, the method of control and other parameters. At the same time, in order to avoid serious problems in the future, special attention should be paid to the high reliability of the power unit. Among the wide variety of models on the market, this quality is possessed by the products of the Japanese brand Tohatsu, which is in high demand among fishermen.

Story

Tohatsu is a trademark of the Japanese corporation Tohatsu Corporation, which develops and manufactures gasoline and diesel internal combustion engines, complete fire engines, fire pumps and hydrants, watercraft and power units for them, as well as other products.

In 1922, the Takata Motor Research Institute was founded in Tokyo (Japan), which was engaged in the development of compact gasoline engines. Three years later, the company was renamed Takata Motor Enterprise. After five years of hard work in 1930, production facilities were moved to Osaka, and the company already employed 25 employees.

In accordance with ambitious plans, in 1932 the company was transformed into a corporation - Takata Motor Manufacturing Corporation, and the industrial production of power units and engines began. By 1935, a sample of the 2F-50 outboard engine was ready.

Due to the threat of aerial bombardment of major cities during World War II, the company, renamed Tokyo Hatsudoki Corporation, built a new factory in Okaya, Nagano Prefecture.

Since 1948, the production of an engine for the needs of agriculture began and a new irrigation pump VB was developed. In 1949, the development of the first compact portable fire motor pump VC-50, which was very popular in the Japanese market, was completed. Advances in production allowed Tokyo Hatsudoki to enter the Tokyo Stock Exchange in 1950.

Since 1953, the production of motorcycles with a volume of 48 cubic meters has been launched. cm.and by 1955 the capital of the corporation had increased to 300 million yen.

In 1956, the company began manufacturing OB-2B outboard motors. With a power of 2.5 hp. this unit became the first Japanese serial suspension, which made it possible to form the main global trends in the production of such products.

Since the beginning of the 60s. In the 20th century, the corporation found itself in a difficult pre-bankruptcy position. This did not stop the introduction of the advanced Runpet CA2 motorcycle model, which won the race. In 1961, Fuji Electric Manufacturing Corp. came to the aid of Tokyo Hatsudoki with the consolidation of the budget. This allowed the company to stay afloat, in 1962 to take first place at the Boat Show in Tokyo and by 1963 to increase capital to 500 million yen. However, in accordance with the requirements of the government in 1965, the production of motorcycles was discontinued.

In 1966, the corporate headquarters moved to a special area of ​​Tokyo - Itabashi, and the plant began to produce V50A fire pumps.

In 1969, the company's capabilities made it possible to overcome the borders of the country and begin manufacturing Rupp Corp. snowmobile engines in the United States.

In 1972, the next renaming of the company took place, and since then, for almost half a century, it has had its current name, which has become the embodiment of high Japanese quality and reliability.

Rebranding made it possible to intensify research and production activities. New products regularly appear on the market:

  • CJ1000 Cold Jet engine for two-ton trucks (1974);
  • outboard motors М35А (1974) and М55А (1980);
  • two-stroke three-cylinder units 90 hp (1986).

In 1988, Tohatsu Marine Corporation was established to increase efficiency in offshore development. This made it possible to start developing and supplying the markets with new models of two-stroke, four-stroke and TLDI suspension devices for boats with a wide range of capacities.

Each manufactured unit is tested on water in a special tank!

In 2005, a new factory was opened in Komagan (Nagano Prefecture), equipped with the latest know-how. In two shifts, 350 top-class specialists using modern equipment are able to annually produce up to 200 thousand units of products.

Since 2018, a research center has been operating, created taking into account the specialization of the main areas of activity. New opportunities allow introducing the development of the latest technologies to offer the market an end product that meets and exceeds the needs of domestic and world markets.

General advantages

The main advantages of the brand are:

  • constant search for technological solutions and development of new products;
  • strict quality control at all stages of production;
  • no negative impact of the implemented engineering solutions on the functionality and reliability of the units;
  • maintaining product economy.

Products

The corporation offers customers a wide range of units of various capacities, schemes of operation and control, as well as their own features.

Two-stroke

The working process in the engine is carried out by two strokes of the piston during one revolution of the crankshaft.

Positive properties:

  • quiet smooth running;
  • low weight for units with power up to 40 hp;
  • high torque value;
  • high reliability;
  • reduced dimensions, suitable for boats with a recess;
  • small acceleration;
  • perfect operation in all weather conditions and under heavy loads.

The disadvantages include:

  • increased noise level at low and medium speeds;
  • increased fuel and oil consumption.

Four-stroke

The working process in the power unit is performed by four strokes of the piston during two revolutions of the crankshaft. Tohatsu products show the best quality even among customers with the highest demands and requirements.

Positive properties:

  • ease;
  • increased power;
  • high reliability;
  • advanced functionality;
  • a variety of additional options;
  • compliance with CARB and EPA standards;
  • stylish design.

With TLDI technology

Powerful direct injection technology is used to reduce emissions and significantly reduce oil and fuel consumption. Allows you to achieve the advantages of a four-stroke engine while maintaining the power of a two-stroke.

TLDI - Two stroke Low pressure Direct Injection.

Positive properties:

  • easy start in any weather without closing the air damper;
  • electronic speed control at idle;
  • slight vibration;
  • comfortable operation with almost smokeless and quiet operation;
  • there is no need to mix gasoline with oil;
  • uniform set of speed.

Where could I buy

Popular models can be ordered online in online stores offering power equipment, watercraft and components for them, as well as from the company's official representative in Russia, Sumeko. All product cards have photos, specifications and descriptions of the proposed devices. If necessary, questions are clarified through feedback channels - what are they, where they are made, how to choose and which one is better to buy, how much it costs.

The best Tohatsu outboard motors

The rating of quality products is based on the opinions of users who have left reviews on the Internet. The popularity of models is due to technical characteristics, functionality, reliability and cost.

The review presents the best two-stroke and four-stroke engines, as well as motors of the TLDI series.

TOP 4 best two-stroke motors

Tohatsu M50D2

Powerful three-cylinder two-stroke model for use on PVC boats up to five meters long with a standard transom height (S) of 38.1 cm. It has tiller control, gears: forward - neutral - back. Carrying and installation is recommended to be carried out by two people or using a special trolley. Long work without refueling is provided by a large external 25-liter gas tank. The warranty period is 5 years.

Price - from 273,000 rubles.

Tohatsu M50D2
Advantages:
  • high power;
  • high reliability;
  • economical fuel consumption;
  • uninterrupted work;
  • long service life;
  • good anti-corrosion properties;
  • material strength.
Flaws:
  • overcharge;
  • supplied on order.

Video about the M50D2 motor:

Tohatsu M18E2

A medium-power model of a two-stroke 2-cylinder unit for installation on PVC boats up to four meters long with the ability to put a loaded five-seven-seater boat into planing mode. Controlled with a tiller. It has three gears: neutral - forward - backward. Shallow mode is switched on manually. The unit is equipped with a generator and a digital ignition system. External fuel tank 25 liters. Exhaust gases exit through the screw, reducing the noise level.Protection against corrosion and damage is provided by multi-layer painting and zinc coating of metal elements. Warranty period 60 months. Remote modifications are available with a short leg (EPS) and with a long one (EPL).

Price - from 135,200 rubles.

Tohatsu M18E2
Advantages:
  • high reliability;
  • quick start;
  • rapid development of speed;
  • economical fuel consumption;
  • overheat protection;
  • low noise level;
  • long service life.
Flaws:
  • no.

Video review M18E2:

Tohatsu M9.8B

Model of a 2-stroke two-cylinder engine for boats with a maximum power that is not required for registration of the unit in the GIMS of the Ministry of Emergency Situations. It can be installed on four-seater boats up to three meters long with a standard transom height of 38.1 cm. The use of a scavenging loop with repeated passage of fuel through the engine saves gasoline and improves uninterrupted operation. Exhaust gases are provided through the screw. Equipped with a thermostat prevents overheating. Rudder control. There are three gears: neutral - back - forward. The transition to shallow water mode is carried out manually. An external fuel tank with a volume of 12 liters is connected.

Price - from 112,100 rubles.

Tohatsu M9.8B
Advantages:
  • high reliability and uninterrupted operation;
  • quick start;
  • economical consumption of gasoline;
  • Ease of use;
  • low noise level;
  • good anti-corrosion properties;
  • long service life;
  • excellent value for money.
Flaws:
  • not identified.

First launch of M9.8B:

Tohatsu M3.5B2

Compact model of a two-stroke single-cylinder outboard motor with low power for installation on small one-two-man boats.Can be used as an additional trolling engine on large boats. It has tiller control, and reverse movement is possible by turning 360⁰. manual Transfer to the shallow water mode is carried out manually. The ignition system is digital, the transmission from neutral is only forward. The built-in tank has a volume of 1.4 liters. Made of aluminum alloy, which is highly durable and lightweight. Zinc coating provides protection of internal mechanisms from sea water. Warranty period - 5 years. Registration in GIMS MES is not required.

The price is from 44,990 rubles.

Tohatsu M3.5B2
Advantages:
  • compact dimensions;
  • light weight;
  • economical fuel consumption;
  • uninterrupted work;
  • high reliability
  • convenient transportation;
  • quick start;
  • suitable price.
Flaws:
  • not detected.

Demonstration of M3.5B2 operation:

comparison table

 M50D2M18E2M9.8BM3.5B2
Power, kW (hp)36,8 (50)13,2 (18)7,2 (9,8)2,6 (3,5)
Speed, rev. /min5150 = 58505200 - 58005000 - 60004200 - 5300
Number of cylinders3221
Working volume, cub. cm69729416974.6
Generator12V 130W 11A12V 80W 7A12V 80W 7ANo
Launch systemelectric or manual starterelectric or manual startermanual startermanual starter
Gear ratio1.85:11.85:12.08:12.15:1
Gear shiftF-N-RF-N-RF-N-RF-N
Control typeremote or manualremote or manualmanual manual
Fuel tank, l25, external25, external12, external1.4, internal
Screw pitch, inch7 - 156 - 11,56,5 - 9,54,5 - 7
Weight for transom S, kg72412612.5

TOP 3 best four-stroke outboard engines

Tohatsu MFS60AW

A powerful injector model of a four-stroke unit on three cylinders, mounted on aluminum and RIB boats with steering up to five meters long, with the ability to easily bring a loaded six-seat water craft into planing. It starts with an electric starter. Raising the unit at shallow depths and tilting when mooring, as well as adjusting the trim, are carried out from the control panel. The new cap has an expressive design and chrome stickers.

Price - from 594,900 rubles.

Tohatsu MFS60AW
Advantages:
  • high power;
  • high reliability and performance;
  • good economy;
  • smooth running;
  • reduced noise level;
  • remote control;
  • equipped with a built-in separator;
  • stylish design.
Flaws:
  • high price;
  • delivery on order.

Tohatsu MFS30C

A reliable model of a four-stroke three-cylinder outboard engine for boats up to 4.5 m long with the ability to easily put a loaded eight-seater boat on planing. Provides smooth operation at different speeds with significant fuel economy and clean exhaust. Along with the modification to the standard transom height (S), units are available with remote control (EPS), short leg hydraulic lift (EPTS) and long leg (EPTL). Carrying and installation is recommended for two people or using a trolley. A large power reserve is provided by the presence of an external 25-liter gas tank.

Price - from 300 500 rubles.

Tohatsu MFS30C
Advantages:
  • reliability;
  • Ease of use;
  • quick start;
  • stable operation with low fuel consumption;
  • overheat protection;
  • smooth control;
  • original air intake;
  • low noise level;
  • good anti-cavitation properties;
  • long service life;
  • quality assembly;
  • high wear resistance.
Flaws:
  • not detected.

Walk along the Volga with MFS30:

Tohatsu MFS 9.9E

A compact four-stroke model of an injection motor on two cylinders for small PVC boats, which does not require registration with the GIMS of the Ministry of Emergency Situations. It can easily bring a four-seater boat up to four meters long into planing mode. The control of the frequency and volume of injected fuel is carried out by an electronic unit depending on the speed. Ride quality and speed are markedly improved by weight reduction through a smaller engine, a lighter leg, and a compact fuel system. Manual tilting in shallow water is facilitated by a balanced center of gravity shifted forward by 3 cm. Updated tiller control system: emergency stop, speed change and gear shift. The warranty period is 5 years.

Price - from 203,500 rubles.

Tohatsu MFS 9.9E
Advantages:
  • easy start;
  • high reliability;
  • economical fuel consumption;
  • does not require registration with the GIMS of the Ministry of Emergency Situations;
  • light weight;
  • equipped with a built-in separator;
  • convenient transportation and installation;
  • quality assembly;
  • stylish design.
Flaws:
  • not detected.

Video review of MFS 9.9:

comparison table

 MFS60AWMFS30C MFS 9.9E
Power, kW (hp)44,1 (60)22,1 (30)7,3 (9,9)
Speed, rev. /min5000 - 60005250 - 62505400 - 6100
Number of cylinders332
Working volume, cub. cm866526333
Generator12V 252W 21A12V 180W 15A12V 145W 12A
Launch systemelectric starterelectric or manual starterelectric or manual starter
Gear ratio2.08:12.17:12.15:1
Gear shiftF-N-RF-N-RF-N-R
Control typeremoteremote or manualremote or manual
Fuel tank, l25, external25, external12, external
Screw pitch, inch7 - 178 - 146 - 10
Weight for transom S, kg98.571.543

TOP 3 best outboard motors with TSDI

Tohatsu MD50

Compact model of a new generation of two-stroke outboards with TLDI technology and automatic oil injection for easy maintenance. Great for use on boats by ordinary fishermen or hunters, as well as outdoor enthusiasts. It has a proven three-cylinder design with good maintainability. Uninterrupted start provides an electric starter. The maneuvering process is facilitated by remote control.

Price - from 275,000 rubles.

Tohatsu MD50
Advantages:
  • design reliability;
  • ease of operation;
  • quality assembly;
  • long service life;
  • protection against overheating and accidental start;
  • instant start;
  • exhaust outlet through the screw;
  • low noise level;
  • lifting the unit hydraulically.
Flaws:
  • noise or vibration may occur;
  • overpriced unit and maintenance;
  • delivery on order.

Overview of the MD 50:

Tohatsu MD90

High-tech model of a two-stroke outboard motor with three cylinders for installation on PVC boats up to five meters in length. The use of a complex of advanced technical solutions made it possible to increase the functionality and efficiency of the unit. Direct fuel injection is used together with an electronic ignition system. Efficiency is increased by an air compressor. All indications for self-diagnosis and control of a working product are received on a laptop computer or tachometer. Complete combustion of the fuel is ensured by the use of TLDI pistons based on Teflon technology
Well adapted to operation in sea or river water

The average price is 394,500 rubles.

Tohatsu MD90
Advantages:
  • optimal ratio of power and weight;
  • compact dimensions;
  • good anti-corrosion properties;
  • economical consumption.
Flaws:
  • increased wear of elements;
  • overcharge;
  • vibration or extra noise.

Walking with MD 90:

Tohatsu MD115

The advanced model of a new generation of two-stroke outboard engine on four cylinders with electronic injection and turbocharging. It is characterized by compact dimensions and high power, allowing you to gain high speed. All parameters of the operating unit are controlled by an electronic control unit with an ECU microprocessor to maintain the optimal ratio. Fast and smooth output to planing is carried out by a system of wide-range adjustment of the angle of inclination. Trouble-free and economical operation is achieved by an automatic oil injection system that determines the optimal flow under various operating conditions. Safety is ensured by overheating alarm systems and protection against exceeding the maximum speed of rotation of the shaft, as well as equipping with an emergency starter cable.

Price - from 503,800 rubles.

Tohatsu MD115
Advantages:
  • high power;
  • quality assembly;
  • stable operation of electronics;
  • long service life;
  • simple control.
Flaws:
  • high price;
  • delivery on order.

comparison table

 MD50MD90MD 115 EPTOL
Power, kW (hp)36,8 (50)66,2 (90)85 (115)
Speed, rev. /min5150 - 58505150 - 58505150 - 5850
Number of cylinders334
Working volume, cub. cm69712671768
Generator12V 280W 23A12V 490W 40A12V 490W 40A
Launch systemelectric starterelectric starterelectric starter
Gear ratio1.85:12.33:12.0:1
Gear shiftF-N-RF-N-RF-N-R
Control typeremoteremoteremote
Fuel tank, l25, external25, external25, external
Screw pitch, inch7 - 1511 - 2111 - 21
Weight for transom S, kg93.5153178

Happy water trips. Take care of yourself and your loved ones!

100%
0%
votes 5
55%
45%
votes 11
100%
0%
votes 5
100%
0%
votes 4
100%
0%
votes 2
100%
0%
votes 2
0%
0%
votes 0

Tools

Gadgets

Sport