Rating of the best coolers (cooling systems) for PCs and laptops for 2022

Computer technology is developing extremely rapidly. The growing capacity of hardware is forcing manufacturers to produce appropriate cooling systems to meet user requirements. An increase in power affects the overall heat dissipation of the PC, which requires an appropriate removal of hot streams. Solve this problem of cooling systems for personal computers and laptops.

What are cooling systems

Computer coolers differ in principle of operation and design. There are two main types of systems.

liquid

These installations consist of liquid lines, a radiator and a cooler. The design is extremely efficient and simple. Basically, the structure works as follows.

1. The heatsink housing absorbs the heat of the processor and dissipates it throughout the body of the structure;
2. The liquid component additionally takes part of the energy and transfers it to the heat exchanger;
3. In the heat exchanger, there is a complete return and dissipation of heat with the help of a cooler.

Remarkable! In modern liquid-type installations, distilled water is used with the addition of additives. The newest designs use liquid nitrogen as a carrier.

Air or mechanical

The variety is the first and most popular type of PC coolers. The principle of operation is to dissipate heat with a radiator and remove masses with a cooler.

How to choose a cooler for a computer and laptop

Among the large selection of models and manufacturers, choosing the best cooler for iron is a difficult task.

When choosing, you need to pay attention to the following factors.

1. Device type. Cooling systems for laptops are much smaller in size than their counterparts for stationary PCs.
2. The type and performance of each network element.The selection of coolers for individual cooling is based on the level of heat dissipation of the part. For example, the processor is able to generate up to 75 watts of energy into heat. Therefore, the cooler is selected for 75 W or more.
3. Installation power. Each structural element of the system unit generates a certain amount of heat. The total power of the system must not exceed the capacity of the cooler. Otherwise, the iron will constantly overheat. With low-power indicators, you can get by with passive cooler lines. Significant power definitely requires a high-quality cooler.
4. Design features of the location of nodes. Some coolers have impressive dimensions. With the constraint of the space of the system unit, bulky structures may not fit into the seat.
5. System load. To use a computer in office programs (Word, and so on), the hardware is not loaded. Consequently, there is no colossal heat release. At critical loads (heavy games, programs), there is an abundant heating of parts, which requires heat removal.
6. Manufacturer and durability stock. Each company presents its product as the best on the market. Do not believe advertising, but study the reviews and characteristics on your own. In the absence of knowledge on the topic, it is advisable to consult with industry experts.

Rating of the best cooling systems for PC in 2022, according to customer reviews

Deepcool CK-11508

Average price: 300 rubles

The rating is opened by a Chinese-made box installation. The model is designed for office machines of low power. Peak power dissipation is 65W. However, frankly weak indicators are compensated by democratic value.

The design is equipped with a compact propeller with a diameter of 92 mm. This is enough to work in conjunction with the main cooler of the system unit. Directly the working body is able to generate an air flow of 40.9 CFM.

There is full compatibility with i3-8400/8100,i7-7700 sockets.

The noise level of the installation does not exceed 25 dB, which is the optimal indicator for comfortable operation even at night.

The contact area is relatively small, but is fully compensated by a strong screw fastening.

• adequate price tag;
• compact dimensions;
• low noise level during operation.

• low power;
• doubtful heat transfer of the radiator;
• fragile attachment.

AeroCool BAS

Average price: 600 rubles.

The next representative of the rating is a competent combination of body and working body.

The cooler impeller is designed for minimal noise emission. Under load, the fan creates a background of only 19 dB, which is six units lower than the first representative of the list. Quiet fan allows you to comfortably work with your computer even at night.

The wide impeller with a diameter of 120 mm is capable of dissipating up to 100 W of energy. The fan motor is not equipped with additional adjustments. The rotor speed is 1200 rpm. The airflow limit is 55.6 CFM.

The advantage of the installation can be considered a durable radiator. Aluminum plates of sufficient thickness to create a balance of rigidity and heat dissipation.

• low cost;
• dimensions fit most blocks;
• sufficient contact patch with the processor cover;
• heat dissipation is sufficient for office tasks;
• minimum noise level.

• not regulated speed;
• weak fastenings;
• not designed for high loads.

Cooler Master C116 (CP6-9GDSC-0L-GP)

Average price: 600 rubles.

Next in line is an analogue of Intel coolers. The design is designed to cool the processor nodes of personal computers and does an excellent job with the task.

The cooler features a standard heatsink and a glamorous pink fan.

The design is designed for processors with heat dissipation up to 95 watts. At higher loads, something more powerful will be required.

The main elements of the product are well made. According to the company, the installation is capable of operating up to 50,000 hours.

Remarkable! The product is equipped with a thermal coating. This allows you to immediately install the cooler on the processor, without additional manipulations. Also included in the package is a second mounting plate.

Among the shortcomings, users highlight the plastic mounting plate. When tightened, the element is deformed, which can cause cracking or breakage of the unit. The possibility of calibrating revolutions exclusively through reobas is also negatively highlighted.

• full constructive compliance with regular models;
• good efficiency;
• thermal paste is applied from the factory;
• the presence of speed control;
• decent kit.

• average performance;
• difficult calibration;
• gentle fastening.

Deepcool ICE EDGE MINI FS V2.0

Average price: 700 rubles

The next device is a representative of the class of tower coolers.The cooler is designed according to modern technology and fits the main types of sockets used in 2022.

The product comes with five adapters that allow you to mount the unit on any processor.

The power of the installation is enough to cool stock processors of low power. If there is overclocking over the nominal version, it is better to buy a more powerful model.

The device is equipped with a 92 mm cooler. This is enough to create a 41 CFM stream. The rated power of the cooler is enough for up to 95 - 97 W of thermal energy.

Users call for an ill-conceived radiator. The space between the plates is reduced, which provokes the active collection of dust and any debris. The system requires stable cleaning and purging.

Experts note the need for extremely careful installation. Complete fasteners are adjusted to the maximum, which complicates the installation - the fasteners are very tight.

• a decent level of efficiency;
• low noise level;
• high versatility;
• rich equipment;
• sufficient performance with stock processors.

• tight fasteners;
• not adapted to work with overclocked machines.

Cooler Master CK9-9HDSA-PL-GP

Average price: 810 rubles.

In the manufacture of the model, manufacturers went on the principle of maximum simplicity of design. And it has served well. At a low price, it was possible to achieve an indicator of 100 W of cooled power.

Fan peak performance is reported at 4200 rpm and 64.1 CFM flow pressure. These characteristics allow you to work with relatively powerful processors of the past.

The standard mount is designed for AMD stones with old AM2/2+,3/3+, FM1 sockets.This type of attachment for 2022 is considered obsolete, but approximately 40% of the machines are in service.

Increased rotor speed negatively affected the durability of the bearings. Guaranteed operating time does not exceed 40,000 hours, which is short under current requirements.

The next disadvantage users call a large amount of noise during peak loads. When spinning to the limit, the fan resembles a vacuum cleaner or an airplane turbine.

• decent efficiency;
• good construction;
• optimal dimensions;
• the ability to adjust the speed.

• high noise level;
• obsolete type of fastening;
• sharpening exclusively for AMD processors.

Deepcool ARCHER BIG PRO

Average price: 950 rubles.

One of the most advanced solutions for stock processors. The model is presented in a standard case with support for the new AMD4 socket. The platform allows you to function effectively in new PCs of medium power.

The folk unit produces up to 125 W of dissipated power, which is due to the copper core. The part is made of oxygen-free copper - this guarantees high thermal conductivity and the return of the accumulated charge.

Also, the device is supplemented with multidirectional cooler fins. This design guarantees maximum heat dissipation 2 times higher than standard variations.

The longevity of the model is due to the presence of a medium-speed rotor. The impeller produces up to 2000 rpm. This reduces noise and vibration during operation.

Users praise the simple fastening system. Standard clips are mounted within 30 seconds with experience.

In general, the device allows you to efficiently load the PC in symbiosis with the functional system of the main cooler.

• high power in relation to dimensions;
• optimal cost;
• low level of noise and vibration;
• fast installation;
• modern socket support.

• the design is not able to cool overclocked machines.

PCcooler GI-X6B

Average price: 1750 rubles.

At the top of the rating is the best solution for overclocking processor chips. The imposing design is designed to cool high power systems. Peak performance allows you to quickly remove up to 160 W of thermal mass. This is a very high figure, since stock processors are not able to generate such a charge.

The unit is equipped with two 120 mm impellers operating in the speed range up to 1800 rpm. The wide radiator is powered by five heat-conducting pipes.

In test tests on the Ryzen 1800x platform, the model showed a temperature threshold of +85 degrees Celsius for the first time in 30 minutes of the procedure. After 2 hours of active testing, the threshold was not overcome.

In general, the device can be recommended for overclocking or active use of powerful hardware.

Complementing the picture is an attractive design and the presence of additional highlights. However, this affected the final cost of the product.

• excellent combination of power and dimensions;
• attractive design;
• the ability to divert up to 160W of energy.

• overpriced price tag;
• tight fittings.

Top best cooling systems for laptops in 2022, according to customer reviews

Cooling a PC is not technically difficult.If the processor or other parts overheat, you can install a more powerful cooler and that will be enough.

With laptops, things are much more complicated. The minimum dimensions of the case do not allow installing a large radiator with a powerful impeller to effectively reduce the operating temperature. Therefore, users prefer cooling pads.

Deep Cool N19

Average price: 750 rubles.

Compact travel rig designed for laptops 15" or smaller.

Small dimensions allow you to fit the design in a travel bag or computer case department. The plastic body of the modification is made in accordance with all the rules. A sturdy base with an adjustable position of the working body allows you to direct the air flow to the right place.

The noise limit is only 21 dB, which is considered optimal for high efficiency.

Among the complaints of users, weak fixation on the surface stands out. The rubberized feet are too tight, which causes slippage on smooth surfaces.

• minimum price;
• sufficient efficiency;
• compact dimensions;
• moderate weight.

• insufficient fixation on slippery surfaces.

Trust Cooling Stand GXT 278

Average price: 1800 rubles

A state of the art system designed to cool units 17" or smaller in size.

The metal case contains 4 120 mm fans, which allows you to cope with the task as efficiently as possible.

Among the additional elements there is the possibility of adjusting the inclination, as well as a changeable speed of rotation of the impellers.

Users praise the low weight of the structure and efficiency.Negative factors include high noise levels and wide ventilation openings. A foreign object may enter the housing.

• sufficient performance;
• optimal weight;
• moderate cost;
• attractive design.

• high noise level;
• large debris may enter the structure.

Trust Cooling Stand Azul

Average price: 2000 rubles

The leader of the user list, the representative of the Chinese market, presented in the middle price segment. The product is designed for laptops with a diagonal of 17.3 inches. Dual fans allow you to quickly and efficiently cool the laptop to acceptable temperatures.

The durable case of the device is able to endure repeated transportation and moving. This allows you to fully use the gadget on trips or active work.

The system is powered in a standard way - via the USB slot.

To improve the design characteristics, blue illumination has been added around the perimeter of the case.

• durable case;
• effective cooling;
• attractive design;
• compact dimensions.

• impressive energy consumption;
• overpriced.

Outcome

Some popular offers were not included in the rating due to controversial reviews or high prices. The list is compiled on the basis of a harmonious combination of price, build quality and work efficiency.