Ranking of the best water coolers for 2022

The presence of a source of clean drinking water nearby is necessary in any place where people are. It is especially convenient when in the cold season water can be heated easily and without additional effort, and in the hot season it can be quickly cooled without using a refrigerator. For such needs, a cooler is needed.

Coolers are convenient devices designed for cooling, heating and dispensing bottled or purified tap water prepared for drinking. The convenient design of the device and its dispenser allows you to pour and receive water with comfort and without the possibility of spilling liquid. To install the cooler, you only need bottled water and a regular outlet, which allows you to place the device in any desired place where there is access to the electrical network. Due to the ease of use and installation, the dispenser is suitable for both home use and placement in public places, including schools and kindergartens. How to choose the best water cooler, we will understand below.

What can a cooler do? Main functions

The unit has three main tasks: heating, cooling and accurate pouring of liquid using a dispenser.

The heating. The dispenser is equipped with special sensors that allow you to adjust the temperature and maintain its level in the desired range, usually from +86 degrees to + 95. Water does not reach a boil - this is done in order to preserve its beneficial natural properties. It is worth noting that this water temperature is best suited for brewing tea - the leaves will not only retain their healing powers, but will release less caffeine than when brewing with boiling water. Some models of coolers are equipped with hot tap protection, this feature is called "child protection", but thanks to it, you can not be afraid of accidental burns, both for children and adults.

Cooling. This function is especially relevant in hot weather and the absence of a refrigerator in the room. The cooler cools the water and maintains it at the set temperature, while the water temperature ranges from +5 degrees to +15. Compressor technology and electronic (thermoelectric) technology are used for cooling.

• The compressor type uses freon, this type of dispenser is convenient for establishments where it is planned to consume liquid in large quantities. Devices of this type are expensive.
• The electronic (thermoelectric) cooling system is used in coolers with a lower cost, besides, this design has less weight compared to the compressor type. Such a device is good for installation in places where there is little traffic and the number of water consumers does not exceed five, that is, for a home or office.

Pouring. Dispensers are used for pouring hot and cold water, but some coolers are equipped with an additional, third dispenser for pouring liquid at room temperature. This saves dispenser resources and reduces energy costs. This type of dispenser, with three dispensers, is the most popular at home.

What are coolers?

Floor. This is a classic design, divided into models with top and bottom loading bottles. The former are more practical to use, often equipped with additional features - a built-in refrigerator, cabinets and other options. Devices with a bottom installation of the bottle do not take up much space, have a pleasant design, and loading a bottle of water is simple - women can easily cope with this task.

The floor cooler is powered by a standard 220V socket and requires a flat floor to be installed. The device is equipped with a display that displays information about the current mode (hot or cold water supply).

Desktop. In terms of functionality and characteristics, it is not inferior to a floor cooler, it has a small height and does not have additional options. The design has a tank with a volume of 18-30 liters. Due to its small size and weight, the desktop version is compact and mobile. Its cost is lower than that of outdoor models. You can install such a device only on a solid surface - the device has a significant weight.

Flowing.The design of such a device does not require loading a bottle of water, the device uses ordinary tap water. This type of cooler is equipped with a home filter for water purification, installed under the kitchen sink. Some models of flow dispensers are equipped with ultraviolet lamps for even more reliable cleaning of the liquid from harmful bacteria.

Additional functions:

1. Carbonation - an option for obtaining sparkling water. A cooler with this function is equipped with a special device (saturator or carbonizer) that saturates the water with carbon dioxide. The dispenser requires a disposable or reusable (rechargeable) carbon dioxide cylinder. Reusable cylinders are more difficult to operate, as they require regular refueling, which can only be done in an appropriately equipped place. A single-use bottle of medium volume allows you to make at least 60 liters of soda, and a large bottle (volume of 5 liters) is designed for approximately 200 liters of soda.
2. Fridge. The built-in refrigerator can be used as a mini-bar where you can store not only drinks, but also food. The volume of the refrigerator compartment is usually 10-20 liters (sometimes 60 liters), and inside there are one or two shelves. The power of such a mini-fridge is enough to store food for several days.
3. Storage locker. Typically, floor coolers are equipped with it, the locker is located at the bottom of the device and is used to store cutlery, as well as durable products (sugar, coffee, tea, and others). The volume of such a cabinet is usually 10-20 liters, there is one shelf inside.

Overview of the best floor coolers

Aqua Work 16-LD/EN

Main characteristics:

• Cooling type - electronic system;
• Bottle loading - top;
• Functionality - cooling, heating;
• Heating power - 700 W;
• Cooling power - 70 W;
• Dimensions - height 96 cm, depth 31 cm, width 31 cm;
• Weight - 6.2 kg.

The average cost is 5,250 rubles.

A classic cooler that is distinguished not only by a pleasant design in a simple office style, but also by good quality. Equipped with an electronic cooling system that allows you to cool 1 liter of water in one hour. During the same time, it can heat up to 7 liters.

There is a toggle switch on the back of the case that allows you to turn off the heating or cooling mode if necessary. On the front of the device there are light indicators signaling the cooler operation mode: the first LED indicates the supply of chilled water, the second indicates the supply of hot liquid, the third indicates that the device is connected to the network and ready for operation.

Since the body of the structure is made of steel, it is possible to use magnetic cup holders. The drip tray is easy to detach and clean.

• beautiful appearance;
• suitable for home and office;
• adjustable legs;
• compact, neat;
• nice value.

• poor cooling;
• does not release air well into the bottle.

Vatten L47WE/L47NE

Main characteristics:

• Cooling type - electronic system;
• Bottle loading - bottom;
• Functionality - cooling, heating;
• Heating power - 800 W;
• Cooling power - 75 W;
• Dimensions - height 105 cm, depth 35 cm, width 31 cm.

Additional functions:

• Child protection;
• Supply of hot, cold and room temperature water.

The average cost is 9,215 rubles.

Thanks to the bottom loading of the bottle, the device not only allows you to change it without much effort, but also looks nice.Like the classic models, the toggle switches for turning off the heating and cooling functions are located on the rear panel of the device. On the outer panel there is an LED indicator of operating modes.

The hot water button is protected against accidental pressing, so children can use the cooler. Another feature of this model is its ability to work properly at high ambient temperatures (up to +60 degrees), so this model is suitable for those who live in hot climates.

• stylish design;
• silent operation;
• rapid cooling and heating;
• affordable cost;
• a small storage cabinet.

• not found.

VATTEN V45QKB

Main characteristics:

• Cooling type - compressor;
• Bottle loading - top;
• Functionality - cooling, heating;
• Heating power - 650 W;
• Cooling power - 120 W;
• Dimensions - height 98 cm, depth 34 cm, width 31 cm.

Additional functions:

• Built-in refrigerator;
• Child protection;
• Supply of hot, cold and room temperature water.

The average cost is 10,779 rubles.

Floor cooler with built-in refrigerator of compressor cooling type. In one hour, the device is able to heat 6 liters, and cool 2 liters of water. Equipped with three dispensers for supplying hot, cold and room temperature water, while the hot faucet has a child safety lock. Submission occurs at the touch of a button.

The front panel is equipped with indicator lights. At the bottom of the device is a compact and powerful 20 liter refrigerator compartment. Inside it is a shelf, the height of which can be adjusted. This model is well suited for the office, allowing you to store food in the refrigerator.

• convenient buttons;
• tanks are made of stainless steel;
• economical consumption of electricity;
• convenient location of the refrigerator.

• There are no handles on the refrigerator door.

Ecotronic H1-L

Main characteristics:

• Cooling type - compressor;
• Bottle loading - top;
• Functionality - heating, cooling;
• Heating power - 500 W;
• Cooling power - 90 W;
• Dimensions - height 95 cm, depth 31 cm, width 32 cm;
• Weight - 13 kg.

Additional functions:

• Leak protection.

The average cost is 11,500 rubles.

The floor unit on two cranes with the top loading of a large bottle and compressor cooling. The design of the device is classic.

Within an hour, the device cools water up to 3 liters, and heats 9 liters. Type of supply "push mug" - on the tap, equipped with a back valve, you need to press the mug to supply liquid.

Tanks for cold and hot water have a volume of 4 and 1.2 liters, while the cold water tank is collapsible, and the hot water tank is seamless, made of stainless steel. The construction details are made of high-quality materials, which guarantees efficient operation and a long service life.

• high heating and cooling rate;
• economical energy consumption;
• leakage protection function;
• affordable cost.

• lack of temperature adjustment buttons;
• lack of child protection function;
• the lower part of the structure is not involved (no locker).

Aqua Work R33-B

Main characteristics:

• Cooling type - compressor;
• Bottle loading - top;
• Functionality - heating, cooling;
• Heating power - 420 W;
• Cooling power - 100 W;
• Dimensions - height 102 cm, depth 33 cm, width 31 cm;
• Weight - 15 kg.

Additional functions:

• Built-in refrigerator;
• Child protection.

The average cost is 12,000 rubles.

This model combines a cooler and a refrigerator located at the bottom of the device and equipped with two shelves. The volume of the refrigerating chamber is 20 liters.

This model is perfect for the office. The compressor system allows for 1 hour to heat 5 liters of liquid (up to +90 degrees), and cool 2 liters (up to +10 degrees). The supply is carried out by pressing and holding the button, there are three of them on the control panel - for supplying hot water, cold and slightly chilled. The hot water dispensers are equipped with a child safety feature.

• high quality construction materials;
• acceptable cost;
• wide functionality;
• beautiful design performance;
• built-in refrigerator.

• loud operation of the device;
• there is no way to adjust the temperature.

HotFrost 350ANET

Main characteristics

• Cooling type - electronic;
• Bottle loading - bottom;
• Functionality - heating, cooling;
• Heating power - 1100 W;
• Cooling power - 75 W;
• Dimensions - height 114 cm, depth 36 cm, width 35.9 cm;
• Weight - 12.7 kg.

Additional functions

• Child protection;
• Kettle included.

The average cost is 23,500 rubles.

A model of a multifunctional dispenser with a two-tone body - a strict combination of black and silver, and a sophisticated version of champagne and gold. The installed bottle does not spoil such a presentable appearance, as it is placed in the lower part of the device and is additionally closed with a special door. This solution has not only aesthetic value, but also allows you to protect water from exposure to light and preserve its beneficial properties. The compartment with dispensers for water supply is also equipped with a door made of transparent material.Included with the device is a kettle with a thermopot function, with a volume of 1 liter.

On the facade of the case there is a touch control panel, and light indicators of the temperature regime. Thanks to the electronic cooling system, the operation of the cooler is almost silent. In one hour, the device is able to cool up to 0.6 liters of water (up to 90 degrees) and heat 8 liters (up to 10-15 degrees).

• the presence of a removable tray for collecting drops;
• very convenient to use;
• touch control;
• the ability to close the bottle;
• silent operation.

• high power consumption;
• inability to control the temperature of the liquid.

Review of the best desktop coolers

HotFrost D1150R

Main characteristics:

• Cooling type - no cooling function;
• Bottle loading - top;
• Functionality - without heating, supply of drinking water;
• Dimensions - height 36.5 cm, depth 33 cm, width 33 cm;
• Weight - 1.65 kg.

The average cost is 1,600 rubles.

A portable device whose task is not to heat and cool, but to supply drinking water at room temperature. In this regard, this model of desktop cooler does not depend on the electrical network, so it is well suited for installation in a place remote from the outlet.

Also, this model is suitable for use in places of temporary accommodation, for example, during a country holiday. In addition, the model has a small weight, modest size, and therefore the dispenser is convenient to take it on trips and travels.

The design tank is made of stainless steel, which allows you to maintain water quality and extend the life of the device. The bottom of the device is equipped with rubber feet, thanks to which the device does not slip and is stable on any surface.

• does not depend on the mains;
• ease of use.

• feed button is tight;
• water can only be poured into a glass.

Aqua Work 36-TDN-ST

Main characteristics:

• Cooling type - electronic;
• Bottle loading - top;
• Functionality - heating, cooling;
• Heating power - 700W;
• Cooling power - 70W;
• Dimensions - height 43.5 cm, depth 29 cm, width 31 cm;
• Weight - 3.4 kg.

The average cost is 4,650 rubles.

Tabletop dispenser model with an electronic cooling system and a “turbo heating” function that allows you to quickly heat water. This option is activated using a digital touch display, which also contains light indicators for water temperature. The body of the structure is made of plastic, so the device is compact and light weight. Feeding occurs by pressing the mug on the dispenser lever.

In normal mode, in one hour the device heats up to 7 liters of water (up to 90 degrees), and cools 1 liter (up to 12 degrees). With such indicators, the cooler consumes a large amount of electricity, due to which it cannot be called economical, but its power can be adjusted using the "eco" mode.

• design reliability;
• energy saving option "eco";
• quick liquid heating function;
• portability;
• light weight;
• convenient display and touch control;
• illumination above dispensers;
• fast working speed.

• high power consumption;
• slow cooling;
• humble design.

HotFrost D65EN

Main characteristics:

• Cooling type - electronic cooling;
• Bottle loading - top;
• Functionality - heating and cooling;
• Heating power - 420W;
• Cooling power - 80W;
• Dimensions - height 41.1 cm, depth 30 cm, width 27.3 cm;
• Weight - 4 kg.

Additional functions:

• Child protection.

The average cost is 4,900 rubles.

A compact dispenser model with an elegant, sleek design in black. In one hour, the dispenser heats up 4 liters of liquid (up to 90 degrees) and cools 0.6 liters (up to 10 degrees). The device is equipped with two dispensers for supplying cold and hot water; a tap for pouring water at room temperature is not provided for in the dispenser design.

The model has a relatively small weight, without an installed bottle, the dispenser can be easily moved to another place. The removable drip tray is easy to clean and wash.

• beautiful appearance;
• convenient dispensers for liquid supply;
• economical energy consumption;
• child safety feature.

• performance;
• short power cord.

Ecotronic H1-T

Main characteristics:

• Type of cooling - compressor cooling;
• Bottle loading - top;
• Functionality - heating, cooling;
• Heating power - 500W;
• Cooling power - 90W;
• Dimensions - height 48.5 cm, depth 31 cm, width 34 cm;
• Weight - 12 kg.

The average cost is 11,100 rubles.

This model is a classic dispenser with a compressor cooling system and serving according to the “pressing cup” principle. The model is available in three colors - black, white and gold. The front panel is equipped with indicator lights. As for performance, the device heats 5 liters of water in one hour (up to a temperature of 90 degrees) and cools 3 liters (up to 10 degrees) in the same time.

The compressor of this model possesses high quality of assembly and differs in noiselessness of work. The collapsible liquid tank is made of stainless steel, easy to maintain and clean. Parts of the metering valves are also made of stainless steel, they are reliable and have a long service life.

• leakage protection function;
• wide temperature range;
• ease of care for a collapsible tank;
• high performance;
• the compressor does not make noise during operation.

• heavy weight for a desktop model;
• lack of child protection function;
• tight faucet for water supply.

AEL TC-AEL-31

Main characteristics:

• Cooling type - compressor;
• Bottle loading - top;
• Functionality - heating and cooling;
• Heating power - 550W;
• Cooling power - 110W;
• Dimensions - height 49 cm, depth 42 cm, width 31 cm;
• Weight - 13.5 kg.

Additional functions:

• Water supply at room temperature.

The average cost is 11,950 rubles.

Model of a small dispenser equipped with a powerful compressor cooling system, providing a fairly wide temperature range. The performance indicators of the cooler are 2 liters of chilled water and 5 liters of hot water in 1 hour. The power consumption is not too high, so the dispenser shows itself as an economical device.

The cooling and heating mode can be turned off and the water supply mode can be left at room temperature. The control panel is equipped with convenient buttons. The device is quite compact and can be installed anywhere in the office or at home.

• nice classic design with control buttons;
• three dispensers for supplying hot, cold and room temperature water;
• economical consumption of electricity;
• compact dimensions.

• high price;
• great weight.

How to choose a cooler?

For the right choice, it is best to evaluate the device according to several main criteria:

Installation type. It is either floor standing or tabletop. The first is suitable for office space, they have high power, are equipped with additional functions, have built-in cabinets, refrigerators or holders for a second bottle of water. Tabletop dispensers are more compact, mobile, good for home use, virtually silent and suitable for installation anywhere.

Type of cooling. This is a compressor system that has become traditional or a more modern electronic one. The first option usually has a low cost, they are distinguished by high speed of work. The electronic cooling system is the safest, so it is often used in children's coolers and small dispensers.

Control type. Usually it is electronic or mechanical type. The mechanical type is the most reliable and has a low cost. Water is supplied by pressing the button or lever behind the dispenser. At the same time, devices with mechanical control have a small set of functions. Dispensers with electronic type of control have light indicators of the temperature regime, a touch screen and a number of additional functions, such as descaling, bactericidal treatment.

Bottle loading type. Top, bottle neck down, or bottom, neck up. The first option involves the application of efforts to install the bottle, which has a significant weight.The second option is more convenient, especially for women, besides, this type of loading is more aesthetic - the bottle is hidden in a special cabinet and closed with a door. When choosing the type of download, you should be guided by your capabilities.

Additional options. Most often, this is water carbonation, ozonation function, filtration, bactericidal treatment, the presence of cabinets, refrigerators, and others. Also, there are options that are responsible for safety - the internal placement of heating elements, the child protection function, additional protection against leaks. The more additional features, the higher the cost of the device.

It should also be noted that for the normal operation of the cooler and the high quality of drinking water, it is necessary to pay special attention to the supplier: Reputation of the company. The firm must have a permit to conduct activities, a license and other permits.

Water quality. If the liquid has been processed incorrectly, the beneficial substances contained in it disappear along with the harmful ones. As a result of such treatment, antibiotics remain in the water. The constant use of such water leads to a decrease in the protective functions of the body.

Disinfection. The device itself also needs proper care and disinfection, which should be carried out every six months, and with intense load - once every 2-3 months. The procedure must be carried out by the company with which the contract is concluded.

When buying a cooler, you need to seriously approach the issues of choosing the device itself and the supplier, as well as the service company that cleans the dispenser. If you provide the cooler with proper care, drinking water will always remain tasty and healthy, which will have the best effect on beauty and health.