Ranking of the best rust paints for 2022

Over time, any metal surface is exposed to corrosion, which becomes a serious problem for it. Therefore, when the first signs are found, they must be eliminated immediately. This can be done by mechanical cleaning, anti-corrosion treatment, followed by painting. However, such a troublesome task cannot always be performed due to the unavailability of some parts for stripping. As a result, to facilitate the process, special materials for rust are used - paints, which, along with solving the problem, do not allow it to progress further.

In the specialized departments of construction stores, popular models are exhibited that have a different composition, functionality, capabilities, and cost. Depending on the need, everyone independently chooses which product is better to buy.

This review examines the types of rust paints, which are the best manufacturers on the market, how much products and new products cost, which ones are the most environmentally friendly, and what to look for when choosing.

General information

Rust paint is a paint and varnish material, the composition of which, evenly applied in thin layers on a metal surface subject to corrosion, forms a protective film with strong adhesion to the base.

At the same time, it becomes not just a painting tool for masking rusty areas. Such paint performs the functions of a primer without the need to level or clean the surface before coating. In addition, it serves as an excellent material for final painting.

It easily adheres to ferrous or non-ferrous metals, and evenly covers metal surfaces that have previously been exposed to corrosion, as well as with the remaining layers of old paints.

Quick drying with the formation of an even dense layer is provided by chemical components:

• alkyd resins;
• low concentration polymer additives.

Advantages

• direct application to rust with its subsequent transformation;
• anti-corrosion properties with the prevention of re-emergence;
• good coverage of the base with the creation of a beautiful appearance;
• preservation of the original appearance;
• formation of a reliable moisture-dirt-repellent layer;
• excellent adhesive properties, providing strong adhesion to the base;
• fast drying;
• wide range of operating temperatures;
• long service life;
• a diverse palette with the possibility of selecting any shade.

Flaws

• inexpediency of processing products heated above 150 degrees;
• the need to protect freshly painted areas from moisture;
• toxicity of certain compounds prohibited for use in residential premises.

Applications

Rust paint is used to treat:

• pipes, batteries, as well as other elements of the heating system, water supply, sewerage

• metal fences or fences

• built-in or separate structures

• gates or bars

• car bodies

• greenhouses, greenhouses, other metal structures

Types of paints

They are divided according to the base substance.

Acrylic

Durable finishing materials consisting of polymer resins and anti-corrosion modifying substances. Differ in universality of application in rooms or outside for processing of metal products.Elastic acrylic-based protective film does not crack due to environmental influences.

• the formation of a dense inert layer resistant to sudden temperature changes;
• the ability to adjust to deformation changes in the metal - compression or tension;
• good adhesive properties;
• does not fade from the action of ultraviolet radiation;
• high thermal stability;
• fire safety;
• without smell;
• lack of toxic compounds;
• the use of different colors;
• long service life;
• easy to clean from tools, can be applied with a spray gun.

• mandatory drying and cleaning of the surface before processing;
• compliance with the recommended parameters of ambient temperature, as well as humidity.

Alkyd

Inexpensive universal products made of synthetic resins, pentaphthalic and glyptal varnishes on an alkyd-urethane basis, enhancing gloss, for the treatment of galvanized metals. Apply in several layers with a sprayer or brush.

• high adhesive properties;
• resistance to aggressive chemical elements or sudden changes in temperature;
• protection against mold and mildew;
• ease of application;
• long-term preservation of color saturation;
• insignificant expense;
• affordable price
• long service life.

• material toxicity;
• the need to use personal protective equipment;
• Strong smell;
• highly flammable substance, which does not allow indoor use, as well as on heated structures;
• the requirement for preliminary cleaning with degreasing of the treated areas;
• thickens over time.

Oily

Environmentally friendly materials based on vegetable oils and drying oils for indoor use.The use of drying oil provides the formation of a water-repellent film. After application, it quickly thickens and dries. Suitable for pre-priming.

Oil paint will not adhere to aluminum or zinc.

• environmental friendliness;
• safety;
• the beauty of the coating;
• no pungent odor;
• small cost.

• low thermal stability;
• exposure to climatic factors with sudden changes in temperature, quickly fades under the sun;
• poor anti-corrosion protection;
• after a few years it is necessary to paint again;
• not suitable for long term use.

Hammer

Special materials of synthetic resins, aluminum powder, crushed glass to create a rough surface with a metallic sheen. They can be glossy, semi-matte or matte. Mask roughness or minor defects with giving a noble look.

Apply in several layers for:

• primary primer;
• dense anti-corrosion coating;
• to ensure an even tone.

• quick-drying within two hours;
• non-toxic with no pungent odor;
• long-term preservation of the original appearance;
• a large selection of shades;
• does not require pre-cleaning;
• long service life up to 10 years;
• resistance to mechanical damage.

• not suitable for structures heated above 150 degrees;
• complexity of removal (if necessary);
• high price.

Epoxy

Materials from silicone polymer resins with the addition of hardeners and dyes based on epoxy for the treatment of outdoor metal structures, batteries, cisterns and barrels.

• fast drying in 10 hours;
• single-layer staining;
• high thermal stability;
• water-repellent properties;
• increased adhesiveness;
• a large selection of palettes;
• resistance to aggressive environments or damage;
• good density glossy coating;
• suitable value.

• high toxicity.

Anti-corrosion protective solutions

1. Primer with zinc additives as the main protective layer.
2. Paints and enamels applied to a pre-primed surface to create a protective film.
3. Electrolytic solution to enhance adhesive properties and prevent corrosion.
4. Ceramic coating by plasma, paraphase, flame or enamel coating.

Rubber

Soft materials consisting of water-acrylic components:

• Finnish latex for strength;
• antifreeze to improve stability at low temperatures;
• coalescent substance for film formation;
• quality pigments, fungicides.

• non-toxic without strong odor;
• for use in rooms with high humidity, as well as metal roofs;
• high adhesiveness;
• economical with low consumption;
• the possibility of applying varnish;
• affordable price.

Criterias of choice

When preparing for painting metal structures, the material must be selected taking into account various parameters. Considering the following factors will help to avoid mistakes when choosing:

1. The type of metal being processed.
2. The presence of climatic factors affecting the surface to be painted: humidity, ambient temperature, mechanical damage. If it is necessary to paint heating pipes or radiators, it is necessary to choose a heat-resistant composition that can be operated at temperatures up to 150 degrees. Furnace elements are treated with materials that can withstand temperatures up to 500 degrees.
3. Paint temperature.
4. Corrosion site area and propagation velocity.
5. The need to use a solvent for dilution.
6. Drying time depending on the place of painting. The value varies from five hours or more depending on the properties.
7. Painting method - roller, brush, spray or aerosol can.
8. The density of the protective film.
9. The level of toxicity with the need to use protective equipment.
10. Planned expense.
11. The desired color, gloss or dullness is selected according to the interior match. Gray-black shades are suitable for non-residential premises, and where there are people, it is better to choose brighter colors.
12. The choice of which company is better depends on the goal achieved as a result of painting, as well as finances. Some have premium material with high parameters, while others offer budget compositions that do not differ in achievements.

Where could I buy

You need to buy rust paint in the "Paints and varnishes" (LKM) department of building supermarkets or specialized stores. There you can always get recommendations and advice from managers to distinguish between polyurethane-based materials and PVC-based paints. At the same time, you can inspect the goods, read the description, how to choose, clarify the features, and also evaluate the appropriate color scheme.

In addition, it is now actively offered to order suitable paint online. The popular aggregator Yandex.Market, which accumulates on its pages the offers of many domestic and foreign manufacturers of quality products in the online store, can be of great help.

Rating of the best paints for rust

When compiling the rating, various characteristics of the considered samples were taken into account, incl. reviews, place of use, painting and operating temperature, application methods, adhesive properties, and many others.However, the priority was given to the presence of positive feedback, the ratio of product quality and cost, as well as the popularity of models in the opinion of buyers.

TOP 3 best rust paints for outdoor use

Teknos Ferrex

The rating of high-quality coatings opens up a universal material for processing aluminum and steel products. It has adhesive properties in relation to galvanized (galvanized) surfaces, as well as areas treated with shopprimers.

It is used for priming metal products operating under heavy load with negative atmospheric effects, incl. for surface or underwater parts of boats.

The composition contains additives against the formation of mold.

Characteristics:

Parameter	Meaning
Dry residue	up to 43%
Coating	matte
Density, g/ml	1.25
Drying time, h	3-6
Consumption, sq.m/l	10
Diluent	Technosolve 1621
Work tool	sprayer, brush, roller, sponge
Packing, l	1,0; 3,0; 10,0
price, rub.	1200; 3540; 10340
Brand	Teknos
Producing country	Finland

• resistance to negative atmospheric effects;
• high dry residue;
• the possibility of processing galvanized or aluminum surfaces;
• painting on tightly adhering rust;
• antifungal properties;
• can be used as a finishing agent.

• high price.

Dulux Master 90

Universal paint for application on metal structures. Provides the creation of a weather-resistant elastic coating that is resistant to sudden changes in temperature and humidity. It has water-dirt-repellent and adhesive properties withstanding prolonged temperature exposure up to +90 degrees.

When repairing, it is applied with a brush or roller in two layers at a temperature of 5-30 degrees and a humidity of 40-80%.

Characteristics:

Parameter	Meaning
Coating	glossy
Drying time, h	12 - the first layer; 16-24 - complete
Consumption, sq.m/l	8-12
Diluent	White Spirit
Work tool	brush, roller
Packing, l	0,9; 1,0; 2,5; 10
price, rub.	850; 1160; 2550; 9650
Brand	Dulux, AkzoNobel
Producing country	Netherlands

• quick-drying;
• does not leave streaks;
• without splashing;
• ease of painting.

• inadmissibility of work at negative temperatures;
• it takes effort to clean up.

Neomid Master Good

Ready-to-use highly elastic material for processing galvanized and aluminum surfaces, as well as ferrous metal structures. During construction, it is possible to paint roofs, drainage systems. Resistant to the negative effects of climatic conditions (ultraviolet, precipitation) with good water resistance. It has a high degree of elasticity, does not crack. Construction paint is applied in two layers.

Long service life up to 10 years.

Characteristics:

Parameter	Meaning
Coating	rubber
Drying time, h	3-4
Consumption, sq.m/l	7-10
Diluent	water
Work tool	sprayer, brush, roller
Packing, l	2,4; 14,0
price, rub.	850; 3990
Brand	Master Good
Producing country	Russia

• pleasant to the touch;
• easy to clean;
• attractive price;
• fast drying.

• prolonged contact with water is not allowed.

TOP 3 best paints for rust "3 in 1"

Husky Klondike

The material of a domestic manufacturer is applied to metal structures indoors and outdoors. Treatment of the corroded surface is carried out after removal of loose rust.Thanks to the components included in the composition, corrosion is converted into a reliable protective layer, its further development is inhibited, and a weather-resistant film is also formed. If the instructions are followed, metal protection is provided for up to eight years.

Characteristics:

Parameter	Meaning
Coating	glossy, semi-gloss
The foundation	alkyd
Color	26 colors
Drying time, h	4-6
Consumption, sq.m/l	10
Diluent	orthoxylene
Work tool	sprayer, brush, roller
Packing, l	0, 25; 0,9;2,5
price, rub.	243; 559; 1469
Brand	Descartes (Russia)
Producing country	Russia

• good hiding power;
• high adhesive properties against rusty metal;
• creates a smooth surface or hammer effect;
• dries quickly;
• tinting according to MONICLOR, Spirit, RAL, NCS catalogs.

• Strong smell;
• the need for ventilation when working indoors.

Tikkurila Metallista

A special weather-resistant material that combines a rust converter, an anti-corrosion primer and a decorative top coat. Provides easy painting of iron and steel sites without additional use of a primer. The presence of wax prevents the penetration of moisture. It is allowed to use in preschool or medical institutions.

Tikkurila computer tinting available.

Characteristics:

Parameter	Meaning
Dry residue	up to 60%
Coating	glossy
Color	catalog
Drying time, h	6-10
Consumption, sq.m/l	10-13
Diluent	white spirit 1050
Work tool	sprayer, brush, roller
Packing, l	0, 4; 0,9;2,5
price, rub.	348; 729; 1890
Brand	Tikkurila
Producing country	Finland

• weather resistance;
• excellent wear resistance;
• double formula;
• prevents the spread of corrosion;
• applied directly to rust
• withstands the effects of turpentine, white spirit, fats, oils, and thick greases.

• flammable material;
• it is forbidden to inhale vapors;
• the largest capacity is 2.5 liters;
• thoroughly ventilate the room;
• high price.

KrasByt Anticorro-Plus

Quick-drying all-weather Russian-made anti-corrosion material with the addition of rust-converting components. It has high protective and decorative properties. It is used for painting ferrous and non-ferrous metals directly over rust. Provides protection of reinforced concrete products from harmful atmospheric factors and corrosion.

Characteristics:

Parameter	Meaning
The foundation	acrylic silicone
Coating	matte
Color	coloring according to RAL
Application temperature, deg	-15-+60
Drying time, h	3
Consumption, kg/sq.m	0,1-0,3
Diluent	butyl acetate
Work tool	sprayer, brush, roller
Packing, kg	25
price, rub.	6380
Brand	KrasByt
Producing country	Russia

• fast drying;
• good weather resistance;
• high thermal stability;
• simple application;
• neutralizes the corrosion process;
• long service life.

• mandatory thorough ventilation of the place of work;
• the need for personal protective equipment;
• highly flammable, keep away from fire.

TOP 3 best paints for hammer rust

Dali hammer

Products of a domestic manufacturer for the treatment of cast iron, steel, non-ferrous or galvanized surfaces directly on metal and rust. Provides a "hammer" effect. With the function of converting corrosion, primer, also decorative enamel. It has a three-stage protection system - barrier, anti-corrosion, tread.

Characteristics:

Parameter	Meaning
The foundation	alkyd
Coating	glossy
Color	9 basic
Application temperature, deg	from +8
Drying time, h	touch - 2; final - up to 7 days
Consumption, sq.m/l	12-18
Diluent	Dali, solvent, xylene
Work tool	sprayer, brush, roller
Packing, kg	0,23; 0,75; 2,0; 10,0
price, rub.	277; 630; 1480; 6800
Brand	Dali (Russia)
Producing country	Russia

• high adhesive properties to rusty surfaces;
• direct application to rust with the effect of the 3 in 1 formula;
• durable layer with the effect of hand-hammered embossing;
• water resistance;
• resistance to oils, weak alkalis and acids;
• on an alkyd basis is not exposed to ultraviolet radiation;
• weatherproof to sudden changes in temperature;
• excellent hiding power;
• low consumption;
• affordable price.

• the need to paint in several layers with the obligatory drying of each.

More information about the paint - in the video:

Panzer for metal hammer

Material for protective and decorative treatment of reinforced concrete and metal products indoors and outdoors. The coating has excellent adhesive properties to rusty surfaces. It has the best physical and mechanical properties - impact resistance, weather resistance, indelibility. It is applied to areas previously cleaned of loose corrosion.

In the case of painting on galvanized areas, an additional primer is required.

Characteristics:

Parameter	Meaning
The foundation	alkyd
Coating	glossy
Color	tinting according to the catalog
Application temperature, deg	+5-+30
Drying time, h	6
Consumption, sq.m/l	8
Diluent	White Spirit
Work tool	sprayer, brush, roller
Packing, kg	0,25; 0,75; 2,3
price, rub.	290; 630; 1560
Brand	Panzer
Producing country	Serbia

• painting directly on rust using the “3 in 1” method;
• convenient packaging;
• beautiful appearance;
• excellent hiding power;
• good value for money.

• Strong smell.

Hammerite hammer effect

Material using DualTech technology from the recognized international leader in the production of coatings from the Netherlands. Provides giving an interesting decorative effect of "chasing", concealing irregularities and masking on tinted areas in case of damage. Aluminum flakes in the composition create a peculiar pattern, and specific silicones with the addition of wax give a water-repellent effect. They are used for anti-corrosion protection and final finishing of metal gates, fences, gratings, as well as furniture.

Characteristics:

Parameter	Meaning
The foundation	alkyd
Coating	glossy, semi-gloss
Color	12 basic
Painting temperature, hail	+15-+30
Drying time, h	4
Consumption, sq.m/l	10
Diluent	Hammerite
Work tool	sprayer, brush, roller
Packing, kg	0,25; 05; 0,75; 2,2; 2,5; 5,0; 20,0
price, rub.	466; 702; 1050; 2550; 2950; 16730
Brand	Hammerite, AkzoNobel (Netherlands)

• direct application to rust;
• unique formula "3 in 1";
• reliable anti-corrosion protection up to 12 years;
• weather-resistant layer with water-dirt-repellent properties;
• fast drying;
• excellent hiding power;
• good adhesive properties to corrosive sites.

• not suitable for metal products in the aquatic environment;
• high price;
• the need for proprietary Hammerite thinner.

More information about painting with this composition is in the video:

TOP 3 best rust paints for cars

Novbytchim primer-enamel

Material for treating clean or corroded surfaces. Characterized by fast drying. Apply directly to rusted areas. The properties of corrosion conversion, primer and decorative enamel are combined. The presence of anti-corrosion pigments prevents the development of corrosion.

Characteristics:

Parameter	Meaning
The foundation	alkyd
Coating	matte
Color	12
Application temperature, deg	from +5
Drying time, h	6
Consumption, sq.m/l	10
Diluent	solvent No. 1, xylene, R-4, R-5
Work tool	sprayer, brush, roller
Packing, kg	0,4; 1,0; 3,0; 20,0
price, rub.	155; 295; 855; 5600
Brand	Novbytchim
Producing country	Russia

• dries quickly;
• high weather resistance and resistance to sudden changes in temperature;
• resistance to salt water and mineral oils;
• elasticity;
• adhesive properties to metal;
• excellent hiding power;
• the ability to work at negative temperatures up to -10 degrees;
• good value for money.

• Strong smell;
• naughty when using a solvent.

Paint video tutorial:

Vixen primer-enamel on rust

Aerosol composition for the treatment of metal, glass, stone and wood surfaces. Reliably falls on structures affected by corrosion, preventing further spread. After painting, the appearance of the product is updated.

Characteristics:

Parameter	Meaning
Coating	semi-matte
Color	9 RAL
Painting temperature, hail	+5-+30
Drying time, h	7
Consumption, sq. m / piece	2,5-4,5
Work tool	aerosol can
Volume, ml	520
By price, rub.	196
Brand	vixen
Producing country	Russia

• convenient application;
• good hiding power;
• fast drying;
• fine spray;
• profitability;
• low cost.

• Strong smell;
• toxicity;
• there are questions about economy and consumption.

Kudo Rust Hammer

Aerosol composition for the treatment of metal surfaces according to the formula "3 in 1". Combines the properties of a corrosion neutralizer, primer and decorative enamel.

Characteristics:

Parameter	Meaning
The foundation	alkyd
Coating	matte
Color	15 RAL
Painting temperature, hail	not lower than +10
Drying time, h	at least 2
Consumption, sq. m / piece	1,0-2,0
Work tool	aerosol can
Volume, ml	520
Average price, rub.	241
Brand	Kudo
Producing country	Russia

• smooth application on hard-to-reach areas;
• fast drying;
• no strong odor.

• wide dispersion of the aerosol jet.

More information on this paint - in the video:

Conclusion

Thus, the right material for painting rusty metal structures will not only update the look, but also protect against the negative effects of external climatic factors. As a result, the renewed coating will increase the service life, and the further development of corrosion will be stopped and stopped.

Enjoy the shopping!