Take care of your teeth! If all people followed this saying, it would allow them to maintain oral health and quality of life for many years to come. Unfortunately, our mentality, unlike the American one, does not involve careful dental care, as a result of which, already in middle age, many are faced with the need to install dentures in order to fully eat.
Caring for such a design is even more difficult than caring for the oral cavity. It should also be cleaned at least twice a day, and after each meal it should be removed and washed under running water. This is necessary in order to avoid the accumulation of pathogens between the gum and the device, which can lead to inflammation.
Wearing dental structures around the clock is not recommended, as it causes discomfort and causes minor damage to the gums.In order for the prosthesis to serve for a long time, it must be kept clean. For the storage of removable structures, it is recommended to use special containers that allow you to keep them absolutely clean and protect them from mechanical damage and pollution from the external environment.
Content
Previously, many users of removable devices kept them in a glass of plain water. This is due to the fact that the structure was made of plastic, which deteriorated from drying out in the air.
Modern orthodontic appliances do not have this disadvantage, and therefore do not require constant moistening. Many users, on the advice of a dentist, wear them for the first time without removing them in order to quickly get used to them. Approximately one month after the first installation, you can remove the device for the night.
Before putting it into storage, the device should be mechanically cleaned from food residues and other contaminants and rinsed in running water. If it is assumed that the design is removed for a short period of time, you can simply wrap it in a napkin, or put it in a special case.If long-term storage is required, a special liquid is poured into the container, which not only disinfects the device, but also helps to preserve its consumer properties.
Some artificial teeth can be stored without liquid for a long time, it is enough just to tightly close the lid of the case in order to prevent contamination from the external environment.
Each user of removable teeth must remember that they cannot be stored in hot (because of this, they can lose their original shape, deform) or chlorinated water (this applies mainly to ceramic-metal devices that are subject to darkening when interacting with chlorine).
Containers for dental structures are a case made of composite materials (most often polypropylene). They are designed to perform the following functions:
Compared to conventional containers, containers provide the following advantages:
Consider what to look for when buying a container, so as not to make mistakes when choosing:
When buying, experts recommend paying attention to the tightness of the lid (which will prevent accidental spillage of the disinfectant), as well as to the flat surface of the bottom (the case must be level and stable so that the disinfectant completely covers the dental structure).
The smaller the weight of the device, the more convenient it is to take it with you, so you should also pay attention to this parameter.
Depending on the functional construct, the following types of containers are distinguished:
Some buyers consider buying a special case a stupid waste of money and store removable designs in a glass of water.It is important to understand that this is an ideal breeding ground for bacteria that can cause further irritation and inflammation of the oral cavity.
The container is made in the form of a rectangular white box with a green/blue insert. Suitable for dental structures of any size. For the convenience of rinsing and dredging, there is a special mesh container in the container.
Any person can use the device - you need to fill it with a special liquid to a certain level, and then add it to a water solution. The removable structure can be left in the case all night, during which time it will be completely cleared of all contaminants.
The lid closes tightly, the possibility of leakage is excluded. Keep the device out of the reach of children.
Specifications:
Index | Meaning |
---|---|
Manufacturer | Curaden International AG, Switzerland |
Color | white |
Dimensions (w*d*d) | 8.5cm*7.5cm*8cm |
The presence of a mesh insert | there is |
The presence of a mirror | No |
ultrasonic cleaning | No |
The presence of backlight | No |
Compartment for storage of hygiene items | No |
average price | 900 r. |
A small case that allows you to carry a removable structure and wash it. The container has a mesh separator with a handle for rinsing the product. The case is made of soft food plastic. Do not use abrasives to clean it.Experts recommend using water-based products approved for use with plastics. The product has a small weight - only 80 grams.
The cover hermetically protects the artificial teeth from dust, dirt and prevents the possibility of spilling the disinfectant.
Specifications:
Index | Meaning |
---|---|
Manufacturer | Bradex, Republic of China |
Color | White black |
Dimensions (w*d*d) | 6cm*9cm*9.5cm |
The presence of a mesh insert | there is |
The presence of a mirror | No |
ultrasonic cleaning | No |
The presence of backlight | No |
Compartment for storage of hygiene items | No |
average price | 200 r. |
This case is one of the best manufacturers of oral care products. The popularity of models of this type is due to the presence of an additional compartment in which you can store a brush for cleaning the prosthesis (included in the delivery, equipped with two heads of different hardness), tablets for a disinfectant solution, and other hygiene items.
Many buyers advise buying such a case because of the successful brush for cleaning the removable structure - its head with white bristles cleans the outer surface of the prosthesis, and the black one cleans the inner cavity. A mirror is built into the lid of the container, allowing you to install the structure anywhere. Another advantage of the device is the presence of a lock on the lid, which completely eliminates the possibility of accidental spillage of the disinfectant composition. The package also includes instructions with a description of the case, and recommendations on how to properly store prostheses in it.
Specifications:
Index | Meaning |
---|---|
Manufacturer | Hager & Werken, Germany |
Color | white |
Dimensions (w*d*d) | 9cm*11.5cm*4.5cm |
The presence of a mesh insert | No |
The presence of a mirror | there is |
ultrasonic cleaning | No |
The presence of backlight | No |
Compartment for storage of hygiene items | there is |
average price | 990 r. |
The most budgetary modification of the container for storing artificial teeth. It is a case made of inexpensive plastic, available in various colors - white, yellow, green, etc.
Compared to other modifications, this container is not waterproof and has no additional accessories. Its only advantage is the budget price, which allows you to throw it away without regret after the appearance of damage.
Specifications:
Index | Meaning |
---|---|
Manufacturer | StayKnow LLC Russian Federation |
Color | white |
Dimensions (w*d*d) | 7.8cm*8.3cm*4.5cm |
The presence of a mesh insert | No |
The presence of a mirror | No |
ultrasonic cleaning | No |
The presence of backlight | No |
Compartment for storage of hygiene items | No |
average price | 120 r. |
This model differs from its competitors by the presence of an ultrasonic cleaning function. The container is manufactured by Bradex in China.Despite the reviews of many buyers, according to which goods from China are of poor workmanship, this model makes a positive impression.
It is made of lightweight plastic, which has increased strength characteristics - resistant to scratches and slight mechanical stress.
In such a case, cleaning is carried out not only with the help of a disinfectant solution, but also with the use of ultrasonic vibrations at high frequencies.
The cleaning process is simple and accessible to everyone: pour 200 ml of water into the container, put 1 tablet and immerse the dental structure in it, after which you should turn on the device for 10-15 minutes. After this time, we get a cleaned prosthesis. Water with solution can be reused up to 5 times. Since ultrasonic waves can reach the most inaccessible places for a brush, cleaning is carried out at a high level.
The device can be used to clean jewelry, where it has also proven itself on the positive side. The device does not require special care - just wash it daily and periodically change the batteries.
If in doubt where it is better to buy a device - in a Russian pharmacy or order on AliExpress, we recommend choosing the first option, since the dubious savings of several hundred rubles are offset by the possibility of receiving a damaged or low-quality product and the lack of a manufacturer's warranty.
Specifications:
Index | Meaning |
---|---|
Manufacturer | Bradex, Republic of China |
Color | White black |
Dimensions (w*d*d) | 8.1cm*9.2cm*7.7cm |
The presence of a mesh insert | No |
The presence of a mirror | No |
ultrasonic cleaning | there is |
The presence of backlight | No |
Compartment for storage of hygiene items | No |
average price | 700 r. |
This ultrasonic bath has a wide range of applications - it is suitable not only for cleaning dental structures, but also for washing, polishing jewelry, surgical instruments, containers and ampoules, beauty devices.
Compared to conventional rinsing, the bath has the following advantages:
The device works from the socket and consumes only 35 watts. Ultrasonic processing occurs at a frequency of 40 kHz. The device works for 3 minutes, after which it automatically turns off. There is a built-in timer that allows you to set any operating time of the device. The capacity of the container is 600 ml, so there are no issues with the placement of the structure. The weight of the product is only 890 g.
For cleaning, a gentle mode is used, in which the cleaned products are not damaged. Even the most soiled items are completely cleaned within 10 minutes. The principle of operation is based on the fact that in the process of ultrasonic vibrations a large number of bubbles are formed in the liquid, which, by “hitting” the prosthesis, clean it from contamination.
Some buyers are confused by how much the bath costs, but when buying, it should be borne in mind that this is a professional-level device that produces high-quality and fast cleaning without the use of aggressive detergents, so such a purchase will pay for itself in a short time.
Specifications:
Index | Meaning |
---|---|
Manufacturer | GT Sonic, Republic of China |
Color | white, black (blue) |
Dimensions (w*d*d) | 14cm*20cm*12.5cm |
The presence of a mesh insert | there is |
The presence of a mirror | No |
ultrasonic cleaning | there is |
The presence of backlight | No |
Compartment for storage of hygiene items | No |
average price | 2 300 rubles |
This German-made bath is also popular with customers. If you have any doubts about which denture container is better to buy, we recommend that you pay attention to this copy. With a compact size, it is equipped with a capacious container that will fit not only artificial teeth, but also some other items - coins, jewelry, removable parts from razors, etc.
A convenient countdown timer can be set to the following times: 1:30, 3:00, 4:30, 6:00, 7:30. As a rule, one session lasting 3-4 minutes is enough to clean removable dentures. Cleaning does not have to be done daily, you can do it once every few days.The bath has a non-removable stainless steel container, the kit includes a plastic separator that allows you to remove the items to be cleaned without touching them with your hands.
The device comes in a branded box, the kit includes an instruction manual with an overview of the main features of the device and a power cord. The lid closes without clips and locks, the fit is not too tight, so the device is not suitable for transporting artificial teeth.
Specifications:
Index | Meaning |
---|---|
Manufacturer | Beurer, Germany |
Color | white, steel |
Dimensions (w*d*d) | 19.5cm*20.9cm*12.8cm |
The presence of a mesh insert | there is |
The presence of a mirror | No |
ultrasonic cleaning | there is |
The presence of backlight | No |
Compartment for storage of hygiene items | No |
average price | 4 000 rubles |
Another representative of universal ultrasonic baths, which are also suitable for cleaning artificial teeth. When choosing a container for dentures of which company is better, many are guided by the price, and it is this model that will interest them. Despite the fact that the goods are made in China, the workmanship is at a good level and corresponds to the declared price.
The capacity of the device is 750ml, with a capacity of 150*130*50mm. The device provides electronic control, there are 5 modes of operation. The power of the device is 50 watts.The capacity of the device is covered with transparent glass, so you can observe its operation during the cleaning process. There is a removable plastic separator that allows you to get the items to be cleaned without touching them.
Since the gadget can also be used to clean other items, including cutlery, jewelry, watches, special plastic modules are included in the package for convenient placement in the container.
Specifications:
Index | Meaning |
---|---|
Manufacturer | Jeken, Republic of China |
Color | White blue |
Dimensions (w*d*d) | 17cm*21cm*14.5cm |
The presence of a mesh insert | there is |
The presence of a mirror | No |
ultrasonic cleaning | there is |
The presence of backlight | No |
Compartment for storage of hygiene items | No |
average price | 2 900 rubles |
The ultrasonic bath differs in capacity (liquid volume up to 750 ml), has 5 programmed cleaning programs. The cover of the device fits snugly to the body, which reduces the noise level and prevents liquid spillage. The device has a degassing function, which makes the cleaning process more efficient compared to similar models.
The bath is quite large, external dimensions are 221 × 165 × 150 mm. The weight of the product without water is 0.97 kg.The tank is made of stainless steel, thanks to which it is not subject to rust and mechanical damage.
In addition to dentures, the device can sterilize manicure and hairdressing tools, cutlery and much more. The package includes a mesh separator, and devices for cleaning items of non-standard shape - watches, CDs, etc.
Specifications:
Index | Meaning |
---|---|
Manufacturer | Lidan, Republic of China |
Color | white, orange, steel |
Dimensions (w*d*d) | 16.5cm*22.1cm*15cm |
The presence of a mesh insert | there is |
The presence of a mirror | No |
ultrasonic cleaning | there is |
The presence of backlight | No |
Compartment for storage of hygiene items | No |
average price | 2 720 rubles |
The Chinese analogue of the Miradent case, outwardly practically does not differ from the original. Equipped with a mirror and a compartment for storing hygiene items, as well as a lock. Unlike the original, it does not have a protrusion in the compartment for storing removable teeth.
It is made of medical plastic approved for use in dentistry. The package includes a plastic brush, which consists of two heads with bristles of different stiffness. According to customer reviews, the brush is not the most successful due to increased rigidity, it does not effectively clean the prosthesis.
Specifications:
Index | Meaning |
---|---|
Manufacturer | HAICAR, Republic of China |
Color | white, blue |
Dimensions (w*d*d) | 9cm*12cm*4cm |
The presence of a mesh insert | No |
The presence of a mirror | there is |
ultrasonic cleaning | No |
The presence of backlight | No |
Compartment for storage of hygiene items | there is |
average price | 500 r. |
Before buying a case for removable teeth, you should study what they are and how they differ from each other. When choosing, you should not focus on the price, since the purchased device is designed to serve a long period of time, and must be of high quality.
Experts recommend paying attention to the availability of additional devices that will be convenient for the user. If you plan to often carry the case with you, you should consider models equipped with a mirror and backlight. The ultrasonic cleaning function is also convenient. Well, if the gadget runs on batteries, then you can take it with you. Unfortunately, the power of such devices is not too high, so if you plan to clean your dentures at home, it is better to pay attention to devices powered by the mains.
An important selection criterion is also the tightness of the case, since the leakage of disinfectant liquid can create additional inconvenience, and the ingress of dirt from the outside can lead to inflammation of the oral cavity. We hope our article will help you make the right choice and buy a container that will last for many years.