Rating of the best adhesives for PVC boats for 2022

Boats made of polyvinyl chloride are comfortable and reliable. They are affordable and very practical. This product is very popular with fishermen. Many hunters buy such products to track game from the water. The boat is compact. It can be put in any type of transport. The inflatable is equipped with a flat bottom, which allows you to swim in shallow water. Anyone can drive the boat alone.

However, this product has disadvantages. PVC material has not very high strength. Therefore, boats from it are often pierced. But this shortcoming is very easy to eliminate. Any user will be able to seal the cut with their own hands using special glue for PVC boats. The exception is holes longer than 15 cm.

Selection Guide

To eliminate the cut, it is necessary to choose the right adhesive. It must be endowed with the following qualities:

• high bonding properties;
• homogeneity;
• resistant to sun and water.

Not every manufacturer can boast of the above qualities of their products. Many types of adhesives turn yellow over time and make the patch look unattractive. All this indicates the low quality of products, such a seal will last a short time. Specialists have selected the best adhesives for PVC. They will securely seal any boat and allow it to serve its owner for many years.

For the correct selection of glue, it is necessary to take into account some criteria. These include:

1. The price range should be above average. High quality products can not cost little money.
2. Adhesive mass should be made only for bonding and repairing inflatable boats.
3. High-quality products should not stick to fingers.

The adhesive mass must have excellent water resistance and tolerate large temperature changes well.
For sealing small punctures and cuts, it is better to use a liquid patch. If you need to repair the oarlock or seat, a one-component product is suitable. With large cuts, the situation is much more complicated. Here you need a reliable adhesive with a two-component base. If the user of an inflatable boat pierced it for the first time, then you need to think very carefully. No need to purchase a cyanide-based adhesive.This component is added to the composition for quick bonding, which has several negative points:

• there is no good elasticity after drying;
• the chemical composition is poorly resistant to temperature differences;
• adhesive does not have the desired durability.

Very often, a tube of glue comes with an inflatable boat. It is great for patching punctures, as it is made specifically for a specific brand of PVC. Such a composition will provide reliable gluing of the two elements.

Product types

Currently, developers have presented a wide range of adhesives for PVC boats. Therefore, the buyer needs to understand the varieties and types of these products. Adhesive masses are of two types: with one-component and two-component composition. The first type is most often used to repair damaged fittings:

• special mounts for seats;
• transom;
• oarlock;
• rings.

One-component adhesive mixtures have advantages. They are inexpensive and dry in a minimum period of time. It is convenient to take such a composition with you on a trip. The fast drying time is very practical. The main disadvantage is that this tool is not well suited for patching the hull of the boat.

Two-component adhesive masses are somewhat more expensive. They have the following positive properties:

• tolerate temperature differences well;
• their elasticity is at a high level;
• glued surfaces can be used for a long period of time.

Many manufacturers make two-component mixtures specifically for PVC material. Such glue will securely fasten any fittings, small punctures and large cuts on the body of an inflatable swimming facility.

Recommendations for use

In order to securely seal the cut, the surfaces must be properly prepared:

• the first step is to deflate the boat;
• surfaces to be bonded must be thoroughly washed and dried;
• to prevent the formation of wrinkles, it is recommended to place a flat board under the working area;
• before gluing, the surfaces must be degreased with any solvent.

At this stage, preliminary work is completed.

Instructions for use

The area to be glued must be cleaned of dust and dirt. The use of sandpaper is not recommended as it may damage the PVC material. Next you need:

1. The surfaces to be glued are degreased with acetone or other solvent. The instructions must be followed exactly, otherwise the material may be damaged.
2. To cut a patch of the desired size and configuration, the size of the cut must be taken into account. After all, punctures come in a variety of formats. Therefore, the size of the patch should be several centimeters larger than the size of the defective area. The cut piece of rubber is applied to the damaged area and circled with a marker or pencil.
3. A thin layer of adhesive mass is applied to the cut out patch and the place of gluing. The composition should dry for 10 minutes. Then apply 1 more layer of glue on both surfaces. Keep it outdoors for about 2 minutes.
4. Before gluing, it is recommended to heat the defective place with a hairdryer and then apply the prepared patch.
5. Then it is necessary to remove the air gap from the entire area. To do this, both surfaces must be rolled with force with a roller. It is better to use the product 2-3 days after gluing.

Minor damage can simply be filled with glue. If the defect is larger than 5 cm, then it is better to use 2 patches. One is placed on the inside, and the other on the outside.

Popularity rating of the best lineups

Currently, manufacturers offer a wide range of repair kits for gluing. Buyers have a wide choice. Each tube of glue contains detailed instructions for repairing inflatable boats with your own hands. However, not all manufacturers indicate the real positive and negative aspects of their products. The best brands of glue will be considered below.

The most inexpensive

PVC moment

In Russia, you cannot find a person who would not know anything about this brand. Under the Moment brand, you can purchase any type of glue, and advertising from this manufacturer is very extensive, so it is incredibly popular. And if in terms of recognition the product could be put in the first place, then in terms of its qualities, glue occupies a far from leading position.

People who repair PVC boats on a professional basis react negatively to the brand, due to the discrepancy between the declared quality and the real one. At the same time, no one advises to bypass the Moment side. He is really capable of gluing parts together, and a non-professional may well use him. However, there are more effective, and also attractively priced options.

Cost: 95 rubles. (30 ml).

• can be easily found in various stores and supermarkets;
• waterproof, can be used for boat repair;
• easy to handle.

• glue loses its properties when exposed to the sun for a long time;
• if gasoline, oil or other solvent gets on the patch, the adhesive layer will collapse;
• high toxicity.

Vial I-900

Many users of specialized forums agreed that when puncturing a boat, it is much better to use one-component glue.There is an opinion that such funds are easier to place, it is not necessary to measure the components in strict proportions. However, Vial glue is contrary to established practice. The difficulty lies in the speed of setting and drying of the glue, which is calculated in seconds. After that, it is impossible to correct the defects that have arisen.

Glue must be applied to the placed patch, the surface of which is carefully processed. The result is monolithically connected parts that have become one. The secret of the glue lies in its property to heat the rubber surface, due to which tight bonding is carried out. With Vial glue, any puncture can be repaired in a few minutes. No need to mix anything, just take a tube with you on the road.

Cost: 100 rubles. (25 ml).

• tight bonding;
• no need to mix.

• not detected.

Bostik NE486

In the first place was a two-component tool that does an excellent job not only with punctures of PVC boats, but also with the repair of other rubber products. There are a lot of positive reviews about this glue from both ordinary boating enthusiasts and repair professionals. Although its price may seem high to some, it quickly pays off due to high-quality results. The connection of materials is strong enough to withstand constant loads.

Glue is sold in cans of 1 liter, this volume is enough for a huge number of repairs. In everyday life, the need is not so great, so it is not advisable to buy it home, while for a professional Bostik can become an indispensable tool. Those users whose boat is constantly damaged for some reason can purchase this product and not regret it.It is also noteworthy that in addition to rubber products, it can be used to connect parts made of wood, metal or leather. Before use, it is recommended to read the instructions and study all the nuances of working with different materials.

Cost: 100 rubles. (25 ml).

• withstands high temperatures (up to 80 degrees Celsius);
• not subject to destruction upon contact with solvents;
• excellent grip;
• strong and stable adhesive layer;
• the seam does not diverge with temperature changes.

• highly toxic, work with gloves and a respirator is allowed.

Three whales

PVC repair professionals do not favor this product. He is credited with fragility, weak stickiness and unsuitability for serious repairs. Glue under the Three Whales brand got into this rating due to its low price. On the one hand, it is not suitable for a full repair. At the same time, it is effective as a temporary solution, in case the boat leaks on the road and there are no other options.

The product is one-component, transparent in color. It is easy to apply and does not have to wait long before it dries completely. You don't need a heavy press either. Glue Three Whales is a quick solution for urgent repair of a puncture. In stationary conditions, the procedure for gluing parts will need to be repeated using a higher quality product. However, it makes sense to purchase a tube of glue that costs 70 rubles and keep it nearby in case of unforeseen breakdowns.

Cost: 70 rubles. (50 ml).

• easy to apply;
• You don't have to wait long for it to dry completely.

• not detected.

Average price category

Super NN

Most often, professional products cost a lot of money. However, the glue of the presented brand is an exception. Its composition has a one-component structure and is made on the basis of polyurethane resin. The mass does not need to be diluted and hardeners added. The adhesive is immediately ready for use. It is often used by professionals in their workshops, since the mass has excellent parameters. For example, the shear stability of a seam is about 1500 kg. Very good result. The glued surface can tolerate temperature changes from -40 to +80 degrees.

Fresh mass has a transparent color. However, users note that over time, the composition begins to turn yellow. This fact can be attributed to a negative moment. Because of this, glue ranks low in the ranking. In domestic conditions, the composition is not used.

Cost: 450 rubles. (1000 ml).

• does not need to be diluted;
• immediately ready for use.

• the composition is not used in everyday life;
• composition begins to turn yellow.

Bravo SP17

The glue is made in the USA. The products of this brand have professional parameters. However, the adhesive mass has a rather high price, which negatively affected the rating. The composition of the product is developed using the most modern technologies. It is not often possible to see a professional version in stores, which is made exclusively in America.

In our country, there are still few reviews about the product. But America has plenty of them. Users speak positively about the adhesive mass and call it the best for repairing PVC inflatable boats.It can also be added that the composition has universal characteristics, it can glue any synthetic products, as well as materials made on the basis of polymer and natural rubber. The mass dries in just a few minutes. It turns out that you can repair the thing very quickly. The end result is of high quality, the product will last a long time. Therefore, you always need to have a tube of glue of the presented brand with you when fishing. He will be able to seal the inflatable boat in any situation.

Cost: 700 rubles. (20 ml)

• the composition has universal characteristics;
• qualitative.

• not detected.

Rogneda UR-600

If the rubber boat is handled with care, then the need for its repair may not arise. It is not economically feasible to purchase an expensive tube in order to fix a one-time puncture. An all-purpose adhesive capable of bonding all natural and synthetic surfaces would be the best option in this situation. With the help of Rogneda, you can glue metal, wood, plastic, fabric and silicone products. With this tool, shoes are repaired and the seams on linoleum are glued.

Rogneda is excellent for repairing rubber boats. You don't need to mix anything to get the glue. Only before direct application, the mixture must be gently stirred. The glue is resistant to moisture, and although its top layer turns yellow over time, this does not affect its adhesive layer. Rogneda cannot be attributed to the best means for repairing PVC boats, but as a universal adhesive that should be in any home, it showed itself perfectly.Another advantage of this product is the absence of toxic components in the composition.

Cost: 520 rubles. (750 ml).

• nothing needs to be mixed;
• moisture resistant.

• not detected.

Expensive and high quality

Reaktor liquid patch

People often share their experiences on the use and repair of rubber boats on specialized forums. In positive reviews, Liquid Patch is often mentioned. However, this product receives mainly praise from ordinary users, while professionals do not trust it too much. First of all, liquid patch is easy to use, despite the fact that it contains 3 main components.

To repair a boat with this glue, you do not need to purchase a patch. The polymer is converted into it as a result of drying. The adhesive components are mixed and the resulting mixture is applied to the damaged area. There is no need to press the patch or place it under a press. The main thing is to let the glue dry well, for this you do not need to touch the patch for 12 hours. If the buyer is not satisfied with the viscosity of the finished product, he can purchase the components himself and mix them to obtain the desired consistency. In this case, it is recommended to buy components from one manufacturer.

Cost: 1 400 rubles. (1000 ml).

• speed of repair;
• suitable for gluing the internal seams of the boat;
• no need to use a brush;
• to repair punctures and cracks, you do not need to buy a patch.

• glue is highly toxic;
• small assortment;
• big holes require a patch;
• the inability to repair the fittings with a patch.

Kleyberg

Adhesives designed for PVC boats are conventionally divided into 2 types: professional and conventional. The second category is more popular among buyers. Conventional formulations are easy to use, you do not need to buy any tools for them. Kleyberg belongs to the category of products for professional use, so it is available in large packs of 15 kg.

On specialized forums you can find a lot of positive reviews about this product. It does an excellent job of bonding rubber and PVC surfaces. In addition, the adhesive has been successfully applied to leather, plastic and silicone products. It stays on top at temperatures ranging from 40 degrees cold to 70 degrees warm. Kleyberg has the best features, but for those who are just learning the basics of PVC repair, it is better to look at simple one-component products. They are much easier to work with.

The cost is 4 600 rubles. (15 l).

• water resistance;
• dense structure;
• excellent grip.

• properties are lost at low temperatures;
• storage conditions provide for a warm room (from +15 degrees Celsius).

Wakol MS 552

This universal adhesive mass will hold together any material produced on the basis of PVC. With this composition, you can repair not only an inflatable boat, but also repair all things made on the basis of polyvinyl chloride. Do not need a large number of adhesives with different properties. WAKOL will cope with all problems and difficulties.

The glue is not professional. It is created on the basis of a modified polymer, which makes the bonding area a whole monolith. However, these products come at a high cost. Therefore, it is not produced in small containers.This was the reason for the location of the glue in such a place in the popularity rating. Although the composition has excellent characteristics.

Cost: 9800 rubles. 7.5 l

• excellent adhesive characteristics;
• universal.

• big expense.

Results

First of all, you need to pay attention to the quality of the glue and its properties. Cheap options do not always guarantee a reliable and durable result. To eliminate the puncture, you must study the instructions and follow them clearly.

In conclusion, we can conclude which of the means is the best:

1. In a situation of small punctures and crevices, a liquid patch will be the salvation.
2. If it is necessary to replace the PVC fabric, a two-component adhesive is needed to connect the patch.
3. Defects in boat fittings are best corrected with a one-component tool.
4. On the road, it is recommended to take small road options.
5. Serious stationary repairs must be done with a professional two-component adhesive.

To choose a glue for repairing a PVC boat, you need to study the characteristics of the best compositions, as well as read user reviews.