Rating of the best spearfishing reels for 2022

Purchase spearguns also implies the purchase of a number of related products that simplify fishing. For example, such a gun will require a line, a depreciation device for a line, a reel and a separate reel line, a compensation device, an additional harpoon in case the main one is lost and many other auxiliary devices. The variety of accessories can be divided into two categories: necessary and those without which spearfishing is possible, at least for the first time. The coil is one of the necessary items. Although it is believed in the circles of masters of fishing that a good fisherman is able to hunt without auxiliary accessories, fishing standards for 2022 make it possible to simplify many processes with the help of high-quality equipment.

The need for a coil is obvious - this device will simplify most of the monotonous hunting processes. In addition, thanks to this accessory, the fisherman can count on the safety of the gun itself in difficult situations. In the most unforeseen circumstances, such equipment can even save the life of an underwater hunter.

To the question: “Is a coil really necessary and how many hypothetical situations are there in which it can provide intelligible help?” One can answer with a universal answer. The mechanism of the return movement is able to prevent many unpleasant situations typical for fishing. For example, a fisherman fired a harpoon at a fish, but did not fully hit it. In such situations, the fish will begin to break out and seek to go as far as possible from the site of the lesion. If the fish is large, it will not be difficult for her to get rid of tench. In this case, the angler needs to throw away the gun, otherwise it will be impossible to surface, because the line supply has dried up. Such an outcome is not uncommon, because a fish that has received an insufficient hit behaves the same in all cases, often it goes into the crevices between the cameos, where it gets stuck along with the harpoon, and, accordingly, with the gun, if the latter does not have a mechanism with a return movement. Also, it is not uncommon for an angler to make a mistake when firing a harpoon, after which the latter gets stuck in an obstacle or underwater clay. In this case, the gun will also have to be thrown away, because removing the harpoon from the obstacle is an extremely time-consuming process.

Technical aspects and precautions

Technically, such a mechanism, with all the advantages, can also become an additional elongation point for the line. The mechanism is intended for extreme cases.It is worth using it only when it is not possible to float to the surface without ejecting the gun. Before use, you need to make sure that there is no load on the reel, because this mechanism is easily deformed and dismantled, even if we are talking about not the largest fish on the harpoon. It is recommended to fasten the line on the hull by winding several times. The mechanism does not allow unwinding when fired, so it is enough to release it from the safety catch to start the return movement if necessary.

Most spearguns for underwater fishing have a special connector for attaching reels. When buying a gun, it is recommended to make sure that such a connector is available, if the gun is already purchased, you should refer to the instructions from the manufacturer to find the attachment points for the accessory.

There are situations when it is necessary to fix the mechanism on the gun, but there are no connectors for mounting. In this case, fastening with metal threaded clamps is allowed.

When buying a reel for a speargun, it is recommended to pay attention to the material of the body of the device. This accessory exists in two variations: in metal and plastic. If the device is made of metal, the angler can count on the strength and reliability of the design, but the cost of such a model will exceed the price of a plastic counterpart by an order of magnitude. The main aspect when choosing is the ergonomics of the design as a whole. All elements of the gun should function without problems, the coil should not interfere with the mechanics of the rest of the structure. If a plastic fixture fits better with the overall architecture of the weapon, it is worth giving preference to it, even if the budget allows for a metal accessory.

Pros and cons of a coil

The use of coils implies a number of advantages and disadvantages. Although the advantages of such a mechanism are obvious, it is still worth weighing the disadvantages before purchasing an expensive copy.

• General balance disorders;
• A shotgun with a reel is harder to control;
• The device requires regular maintenance.

The device has much more advantages, in addition, the strengths of the mechanism cover all its misses.

• With the help of a reel, it is possible to neutralize the impulses of a escaping fish;
• The gun does not have to be thrown away if the harpoon is caught on an obstacle;
• It is not necessary to loosen the tension of the line;
• Some anglers note that harpoon laying is much easier with a reel.

The most obvious plus is the insurance of the gun in case of tying the harpoon with a limited line length. The reel can save the angler an impressive amount and a lot of time. It is worth considering the peculiarity of some foreign models of guns, which do not provide for a coil attachment mechanism. Similar designs are found among imported pneumatic models. The buyer may secure the coil with clamps or other methods, but such fastening should be carried out only at your own peril and risk.

The best reels for spearfishing

Spiro

Devices from the manufacturer Spiro are compatible with guns:

• Mares Cyrano Evo;
• viper;
• sniper.

Mares Vertical Spiro is designed for the new generation Cyrano Evo pneumatic guns from Spiro, as well as for Viper and Spiner crossbows. Compatibility with implements from other manufacturers is not guaranteed. On sale are configurations with a spool volume of 65 m and an enlarged version of 87 m. A distinctive feature of the model is a vertical mount on the gun body.This method of fastening ensures minimal losses in ergonomics and maneuverability of the gun. The model has a well-thought-out lever-type trigger mechanism.

• Choice of configurations on 57m and 87m;
• Possibility of vertical mounting on the case;
• Sophisticated trigger mechanism.

• Not the cheapest option
• Not compatible with all guns.

Review:

“I purchased a coil from Spiro on the recommendation of an experienced friend. I bought a model for 57 meters, because it is difficult for me to imagine a situation in which a line length of 87 m would be relevant. I have not yet tested the device in practice, as I avoid dangerous situations, but I can say that vertical mounting and adequate weight device with almost no loss of maneuverability. I can advise those anglers who are looking for a good option that does not weigh down the gun!”

Seac sub

One of the most standard options. This model has a rather convenient locking device, which is important for an accessory of this kind. The body is made of a special impact-resistant plastic, and the axis of the structure is made of metal. It is worth noting the relatively small container under the line, the bunker supports only 30 m / 2 mm. It is perfectly compatible with Seac Sub crossbows of all models, it is enough to install the accessory in the slots of the connector on the gun body in a standard way.

• Housing made of impact-resistant plastic;
• Convenient stopper;
• Metal axis;
• Full compatibility with Seac Sub crossbows.

• Small capacity.

Review:

“I purchased this model for a crossbow from the same manufacturer. The coil got up without problems, without weighing down the structure. In part, this is due to the miniature dimensions, because the receptacle under the line is able to hold only 30 m.On the other hand, in practice this length is sufficient. I once had to use the return movement function and there were no problems with the length. I recommend this model to all owners of Seac Sub crossbows!”

Scorpena

Devices from Skorpen as well as Spiro offer the user a vertical mount on the body, which has a positive effect on the ergonomics of the gun. The design features of the accessory allow you to position the line as evenly as possible along the guide channel. The body is made of a special aluminum alloy, which on the one hand gives it strength, and on the other hand provides an adequate weight load on the gun, because aluminum is a light metal. The dimensions of the spool for laying line in the main part of the accessory have sufficient space for 60 and 70 meters in length. The mounting connector on the coil body has two holes through which the device is connected to the tool by means of clamps. This type of fastening is universal and allows you to fix the coil on the bodies of guns of different diameters. There is also a mechanism for adjusting the rotation speed of the device.

• Metal case;
• Universal mount;
• Spool with a receptacle for 60 and 70 meters;
• Rotation speed adjustment.

• Not the cheapest model.

Review:

“The 70m Scorpion reel is already the second one in my collection. I have been spearfishing for more than 15 years, I used to use a reel with a small receptacle. Until recently, 40 meters was enough for me, but now I hunt in especially difficult conditions and for large fish, so cases when a fish takes a harpoon to an impressive depth are not rare. The 70m scorpion is a great option for me, especially with the rotation speed adjustment mechanism.I recommend this model to all anglers who are engaged in spearfishing at a professional level!”

Beuchat Marlin

This model has small dimensions and a reverse mechanism. Anglers note its effectiveness at an impressive depth. The spool supports 50m/2mm and 70m/1.7mm line sizes. It is possible to adjust the rotation speed. Vertical mount, guaranteed compatibility with shotguns from Beuchat Marlin.

• Rotation speed adjustment;
• Reversing mechanism;
• Efficiency at impressive depth.

• Not found.

Review:

“I have been using this reel for over a year. For all the time I have never failed, although I had to use it quite often. I recommend it to all lovers of spearfishing at an impressive depth!”

Horizontal Huntriver

The body of the accessory is made of aluminum-based alloys. The material of manufacture provided the structure with strength and lightness, which is important for an accessory of this type. The capacity of the spool is 30m/2mm. The design has a locking mechanism in the form of a nut with a specially finished surface. Design features allow you to fix it on guns of all sizes using clamps.

• Rugged housing;
• Universal mount;
• Locking mechanism.

• Not found.

Review:

“I used this model before, but replaced it with a copy with a larger capacity. The coil is solid, no complaints. I recommend this model to all beginners in spearfishing!”

Outcome

A reel is a device, although not a necessary one, but it is still important when it comes to productive spearfishing.Modern realities make it possible to integrate such mechanisms into the design of amateur guns, although some time ago these devices were found only in professional underwater guns. This mechanism is indispensable if the angler intends to hunt for trophy fish for a long time and scrupulously. In addition, favorable conditions for hunting under water rarely fall out, so it will not be superfluous to reinsure the gun with a reel, because it will allow you to save the gun even in difficult situations.

Buying advice

When buying such a mechanism, it is recommended to follow a number of general rules:

1. Size affects its quality. Speaking of dimensions, it is worth considering the length and thickness of the line. A certain reel is sharpened to certain dimensions, so the dimensions of the line for one instance cannot be set in a model of a different configuration. If the line dimensions correspond to 10m / 2mm, then the model for 55 mm spool will be more than enough. It is worth considering that the size of the model is proportional to its weight, which means it will affect the overall maneuverability of the gun.
2. Body material. As in the first point, the aspect of the material depends on the load on the tool. If the angler is used to hunting carefully, and his movements are measured, a plastic reel will be enough. In addition, plastic models have an advantage over metal ones, which is low weight. If the angler wants to get maximum reliability from the device, he should pay attention to metal models, which will also show an increased price tag for increased reliability.
3. The ability to install a carabiner instead of a shock-absorbing device. Many anglers remove the shock-absorbing device when installing the reel, and install a carabiner in its place.In this case, the shock-absorbing function will be performed by the coil.
4. Before purchasing a particular model, it is recommended to consult with experienced users, if possible, or seek advice on the relevant forums.

If the gun is purchased from a specialized shop, the seller will most likely recommend buying a reel as well. He will help you choose the most suitable option and give all the necessary advice on operation. It is worth considering the features of some models of guns, on which it is impossible to put coils from third-party manufacturers. For example, some underwater crossbows do not allow the use of third-party uniforms, this is due to the specific architecture of the weapon. Some craftsmen are able to install body kits even on specific specimens using clamps and other auxiliary fasteners, but such methods are carried out at their own responsibility. In addition, if the weapon is under warranty, such integrations can greatly interfere.

It is also worth trying on the coil before buying. It should stand in such a way as not to block the line and other elements and weapon mechanics. Otherwise, the effectiveness of the gun may be noticeably reduced. It is worth paying attention to the quality of the material of manufacture, regardless of whether it is metal or plastic. In both cases, an unscrupulous manufacturer can save on material, which will definitely affect the quality of hunting.