Rating of the best rakes for walk-behind tractors for 2022

Any agricultural work is always hard physical labor, especially when working on vast territories. Motoblock rakes are far from a new invention that is in great demand among farmers. These attachments make the daily tasks of harvesting and haymaking much easier, and are much more efficient than conventional cultivators. They allow you to turn the grass faster, improving the overall quality of work.

This review of the best walk-behind rake will detail how to choose a good model for a particular type of work, point out the advantages and disadvantages of attachments, and also present a list of popular manufacturers.

Criteria for choosing a good rake for walk-behind tractors

A rake for walk-behind tractors also has the name "rake-tedder" or a hinged structure for a walk-behind tractor. Rakes are considered attachments because of the special attachment to the adapter on the walk-behind tractor, which classifies them as additional tools.

The main task of the device is to collect grass into windrows, as well as raking and wrapping hay. On the market there is a huge selection of models from different manufacturers, allowing you to perform a variety of actions. All of them differ in technical characteristics.

The design of the rake usually consists of a rake beam with teeth, a frame with a mechanism for dropping hay, a system of levers for raising and lowering the beam, as well as counterweights.

The device has the following principle of operation: an adapter is attached to the trailer bracket of the walk-behind tractor, on the seat of which the operator controls the equipment. When the device moves along the swath, the tines of the rake move the cut grass along the stubble base of the field, collecting it into a swath. When the tines reach sufficient volume, the operator must move the handle to raise / lower the beam forward, after which the rake along with the tines rises, and the cleaning rods throw off the cut grass from the tines. Then the handle is again retracted and work continues in the same way.

Some craftsmen prefer not to buy equipment, but to make it on their own - this is quite possible when following the instructions for manufacturing and purchasing all the necessary spare parts.A well-made homemade rake will not be inferior in quality and efficiency, but you need to have certain skills in order to get a decent product as a result. Drawings and manufacturing schemes can be found on the Internet, but it is best to purchase a finished device in a special store.

It is very important to follow the safety and operation rules: the rake should be stored in a dry place, and after use it must be washed and allowed to dry - this prolongs the service life of the equipment.

The direct advantages of using attachments, in addition to speeding up and improving work efficiency, include the fact that the rake cleans high and low herbage without any problems, they are simple and easy to use, have a universal design suitable for different types of walk-behind tractors and low-power tractors.

In the course of work the roll is not polluted by stones and the earth.

Having understood the scheme of operation of a rake for walk-behind tractors and their features, it is necessary to study the following characteristics to select the most suitable option.

Strength

Their reliability and service life depend on the strength and quality of the material from which the rake is made. The best option would be devices made of steel, since steel is the most resistant to corrosion. If the material is reliable and durable, then the device will serve the owner for more than 10 years, subject to the correct operating and storage conditions.

Functionality

Since all models are slightly different from each other, some of them can have much more options in use and simplify the process of packing hay.The functionality of the rake attachments includes their versatility, coverage width (the larger it is, the larger the area can be processed), the convenience of design, performance, and the possibility of non-standard use. So, for example, some models are able to perfectly collect snow and clear paths from debris.

Manufacturer

The manufacturer plays an important role in the purchase of equipment. A reliable and high-quality equipment supplier guarantees the quality and long service life of the manufactured equipment. There are a huge number of companies and firms for the production of mounted rakes on the market. You should pay attention to those that have long been in good demand among buyers, have a certificate of quality and fame. It is also important to look at reviews about the model or manufacturer in online stores or forums where people share their opinion about the purchase. If the device of a particular company has positive reviews and high marks, then you can safely take it, unlike models that have only negative reviews or no reviews at all.

Construction type

The rake-nozzles on the walk-behind tractor have their own classification, consisting of different types, which are intended for various types of work. The units are divided according to the method of installation into roller and rake-tedders:

• Rollers are used to collect grass and level the plowed area. An adapter is used to connect such a device, and the structure is controlled using a lever. These fixtures are made from stainless steel.
• Tedders or cross heads are used directly for tedding freshly cut grass. This helps it dry faster and more evenly, thus avoiding smoldering.With this installation, hay is collected in shafts, usually this type of nozzle has large dimensions.

Price

Each buyer has his own average price, by which he is guided when choosing a model. It is best to purchase devices with a good reputation at not too high or low cost, choosing an option that will meet the needs without breaking the wallet. So you can avoid disappointment when buying a not very efficient expensive model, or vice versa. Budget products can be both very productive and weak, so before buying, you should weigh and review all the options available.

The best rakes for walk-behind tractors

This is a rating of the most famous and reliable rakes for walk-behind tractors with a detailed description of the characteristics of each model, as well as their advantages and disadvantages in operation.

Neva

Devices for the Neva type walk-behind tractor are universal and suitable for any type of equipment due to the presence of a special adapter. The average swing width of the rake is from 50 to 150 cm, which allows you to process areas of different types and sizes.

The device has a base on springs, due to which the rake smoothly passes over the ground, adjusting the amplitude necessary for movement. The nozzle is very flexible, which avoids malfunctions in the form of frequent breakages and curvature of the teeth, and thanks to the presence of a manual control mechanism, use becomes as comfortable as possible.

The design is able to work equally well with hay and leaves.

• stability and reliability;
• suitable for work in different areas;
• convenient design and management;
• large rake width;
• versatility.

• not found.

Sun

Devices of this type are specially designed for making hay, so their design is made so that the grass dries out evenly and does not cake. The unit has thin beams of a rounded shape, with the help of which the cut grass is easily turned over, and leaves and straw are also raked.

By variety, such a rake comes with two, three and four wheels. The width of the treated area depends on the number of wheels. So, four-wheeled devices can work on a site of about 3 meters. There is a popular model with five wheels that are placed obliquely. Such a unit has a rather large length - almost 4 meters, and weighs - 140 kg. With such equipment, the speed of harvesting is significantly increased, since hay can be removed from an area of ​​about 1 ha in an hour.

The most popular models of the "Sun" type are Czech and BM-3. They work effectively in large areas.

• high speed of work;
• wide functionality;
• improving the quality of raw materials (hay does not cake);
• ease of use;
• variety of models.

• large dimensions.

SCOUT PL-3600

The tedder rake has a special design that allows you to speed up hay harvesting and save the harvest. The device works in two directions at once - raking and tedding. With the help of three wheels, thick grass is quickly raked, formed into swaths for subsequent harvesting and drying.

The device works with SCOUT mini-tractors with a single-point suspension and SCOUT walk-behind tractors using a PL-35 adapter.

The structure includes a trailed frame with shock absorption, tubular wheel mounts and three discs with wheels.The working width is 1800 mm, the working speed is about 7-10 km / h, and the productivity is 0.9-1.3 ha / hour, which are very good indicators.

• reliable manufacturer;
• high speed;
• wide operating range;
• work in two directions at once.

• only suitable for SCOUT devices.

SCOUT PL-1400

This compact equipment is made of high-quality metal, which does not give in to corrosion and deformation, so its use is effective in all weather conditions. With the help of this unit, grass is collected after mowing. It is designed for summer cottages and territories up to 4-5 hectares.

Despite the small dimensions, the working width is 140 cm and the maximum working speed is 6 km/h.

The model has positive reviews from many buyers.

• strength and reliability;
• quality material;
• small dimensions;
• good performance.

• only suitable for SCOUT vehicles;
• processing of small areas.

Jarmet Z591

A model of a fairly well-known Polish manufacturer of attachments, which has proven itself in the market and has many positive reviews from customers. The carousel-type device effectively rakes the cut grass into swaths that are easy to clean.

The rake has two spring-loaded rings and operates at speeds up to 12 km/h and has a capacity of up to 4 hectares/hour. The working width is 2.8 meters.

• excellent characteristics;
• reliable manufacturer;
• Suitable for large area cleaning.

• high price.

GPM-1

The unit is designed for raking mowed masses and is suitable for working with walk-behind tractors with an engine power of at least 6 hp, with an AM-2 adapter. The coverage width is 2 meters, which is great for cleaning any terrain, and the working speed is up to 3 km/h.

This is a compact and budget device that will fit perfectly into the farmer's arsenal and help you harvest faster.

• compactness;
• nice price;
• normal working width;
• fine quality.

• low speed;
• fits one type of adapter.

Hay rake FZ

Rakes of a Russian manufacturer, which are compatible with all types of walk-behind tractors, that is, they are universal. They have a light weight - 80 kg and a coverage width of about 2 meters, which is quite enough for a medium area. The device cleans hay and grass well, rolling them into bulk swaths. The equipment is controlled by a lever. The adapter is not included with the model, so it must be purchased separately.

• small size;
• acceptable cost;
• universality;
• sufficient working width;
• comfortable and durable design.

• adapter sold separately.

GPS 210 cm BW 1k

Another model of a domestic company, which has small dimensions and does an excellent job with agricultural harvesting in medium areas. The capture width is 2 meters, like the previous device. To some extent, they are analogues, but they are not inferior to each other in quality and performance. Management is also carried out using the handle, and the adapter is purchased separately, while the rake is compatible with all walk-behind tractors.

• compatibility with all types;
• acceptable working width;
• low price;
• compactness;
• quality assurance.

• no adapter included.

Tedder VM 4-wheeled ChB

This attachment is practical and economical to operate. It can both rake and form hay into windrows, and agitate it for uniform drying. The device is compatible with all types of walk-behind tractors, has 4 wheels and a coverage range of 1.4 meters. The model has proven itself in the market and receives positive reviews. The design is lightweight - only 60 kg.

• functionality;
• small design;
• universality;
• pleasant cost;
• quality assurance and reliability.

• suitable for small areas.

VM tedder 3-wheeled

The equipment can both rake and turn the cut grass to improve the quality of the raw material. It is made of hardened metal and has a durable universal design, all parts of which have passed the necessary government quality tests. The impeller hub has two bearings for longer life. The gripping range is 1.2 meters, there are three wheels and a lifting mechanism for easy maneuvering. The dimensions of the product are even smaller than those of previous models, and amount to 45 kg.

• low cost;
• quality and reliability;
• universal design;
• ease of use;
• manufacturability;
• diminutiveness.

• suitable for small areas.

general information

TITLE	APPROXIMATE COST
"Neva"	Depends on specific model
"Sun"	Depends on specific model
"SCOUT" PL-3600	RUB 29,760
"SCOUT" PL-1400	RUB 21,440
Jarmet Z591	RUB 63,936
"GPM-1"	RUB 14,050
Hay rake FZ	12 800 rub.
"GPS 210" cm BW 1k	RUB 14,950
"Voroshilka VM" 4-wheeled CW	15 600 rub.
"Voroshilka VM" 3-wheeled	11 900 rub.

This is a list of the best rakes for walk-behind tractors, which presents a variety of models for agricultural work that meet all standards of quality and reliability.