Rating of the best shoe holders for 2022

Even the highest quality shoes need proper care. Especially if it is a seasonal model that can stand motionless in a closet for several months. To maintain the quality, as well as the original appearance of the product, such simple accessories as mold holders for shoes will help. The best manufacturers present their product options, and modern buyers are lost among the abundance of assortment. We will try to solve this problem by talking in more detail about what pads are, and about the criteria for their selection in the presented review.

Description, as well as characteristics

Form holders, blocks or spacers serve to maintain the shape and appearance of the boots, as even the best specimens lose their original appeal over time. They consist of a toe and heel, between which a screw or spring mechanism is inserted, allowing you to adjust the size of the strut. In addition to maintaining a neat appearance of products, pads have a lot of other advantages:

• moisture absorption;
• there are models with antibacterial function;
• spacers help maintain the strength of the material from which the shoes are made;
• the useful qualities of the accessory can also be attributed to the alignment of the soles of shoes made of genuine leather.

For 2022, it is easy to meet the following types of holders.

1. With a spring - a part consisting of wood or plastic with a spiral attached to it with a special tip. The main advantage of such analogs is the ability to adapt to any shoes. However, the fact that the holder rests on only one point can cause deformation of the heel of half boots.
2. With a simplified back - these types almost always have a pointed toe, which is also their disadvantage, since they only fit certain shoes. And at the heart of this device is no longer a spring, but a hinge.
3. With a solid heel - such an analogue of the holder occupies almost the entire space inside the boot, helping it to maintain its shape immediately on the toes and heels;
4. Anti-kink holders - are just the front of the boot without a spring or heel.Such mold holders can be made of cardboard or plastic.
5. Completely repeating the shape of the legs - they are made according to an individual template.
6. Shaft options. They have a sliding, spring mechanism of 25 - 40 cm.

Materials used in the manufacture

1. Plastic mold holder is the most budget option. These spacers can be bought in small shops that sell inexpensive shoes, as well as care products for them. However, such material does not remove likely odors or moisture, preventing the boots from drying out well. And in composite options, you can find such a drawback as the inability to place the spacer entirely. Since the tip of the metal spring must be pressed and then rested directly against the heel of the boot, which with regular use can lead to heel deformation.
2. Foam material - one of the modern inventions, is highly environmentally friendly.
3. Foam spacers. Inexpensive products with such a base are an excellent choice for travel lovers. These things weigh very little, and the price is quite acceptable. Soft yet stretchy, they bend easily, making them a great option for any shoe. Such an instance is impregnated with a special composition:

• it prevents the growth of bacteria;
• eliminates an unpleasant smell;
• prevents inflammation on the skin of the feet.

4. Wooden mold holders are considered the most hygienic. They are able not only to keep the shape of the shoes, but also help to eliminate moisture with an unpleasant odor in a natural way, leaving the smell of fresh shavings in the shoes. They are made:

• from ebony;
• mahogany;
• beech or other species.

But the best is considered to be a mold holder made of natural cedar with correctly arranged holes, which provides the product with:

• antiseptic property;
• antibacterial effect;
• and also guarantees good air access to the entire inner surface of the shoes.

A variant of a spacer made of wood, like a simple cardboard form holder, can even be made by hand.

What to look for when choosing and tips on how to use the form holder

1. Pad type. By 2022, low ankle-length models have become popular. They proved to be excellent during long-term storage, but if boots or warm winter boots are to be set aside for the season, it is better to use higher analogues or separate options for tops. It is also quite common to find models with a special heel counter that helps keep the heel from deforming.
2. Fixture size. There are several lengths of the shoe holder. Most of these products are universal, they are great for any model of shoes or boots, as their size is easily set along the length. Others, on the contrary, are designed for 2-3 sizes (39-40 or 41-43). Therefore, according to consumer reviews, giving preference to a particular model, it is necessary, first of all, to take into account its features.

• For those who prefer a one-piece copy, it is recommended to stop looking at a model that will fully match the shape of the boots;
• when choosing composite spacers, you should find out the maximum allowable size: it is important to remember that the spring or telescopic tube is not very short, because of which the holder will not rest well against the heel of the shoes.

3. Material used in the manufacture of spacers. Often this fact affects the cost of the product. For example:

• wooden models can last quite a long time;
• but options made of plastic or other materials will not please you for so long, but you can buy several of them at once - for each pair of shoes.

4. Before choosing a block, you should pay attention to the shape of the spacer itself. For those who prefer traditional boots, any type of holder is perfect. But connoisseurs of pointed socks should look for the most suitable shape of spacers or order them online in an online store.

A common mistake when choosing is to buy a wooden mold holder coated with varnish or paint. Since such analogues lose all useful properties.

Rating of quality products with a full foot

Avel

As part of this design there is a telescopic mechanism. The spacers themselves are made of pink cedar wood, which helps to securely maintain the shape, as well as the main qualities of the holder. The accessory consists of two parts.

1. Heel - fully rests on the heel.
2. Nose - divided into 2 halves:

• the main one - maintains the correct shape of the boots in length;
• secondary - already responsible for the width of the model.

These cedar mold holders are unvarnished, which means they perfectly absorb moisture, helping to dry boots quickly.

• Prevent deformation of the model;
• with them, everyday shoe care is easier;
• natural massif of cedar wood;
• carefully thought out design;
• they smooth out small wrinkles and creases on the skin;
• fittings details are stylized as silver;
• there is a screw on the side to help adjust the width of the boots;
• there is a persistent rich aroma of fresh wood;
• easy to insert and remove;
• can dry out your shoes.

• There are small burrs.

Movement type	Telescopic
What is made of	pink cedar
The size	36 to 37 cm
average price	1799 rub

Shoeguard

These holders are an excellent choice for those who carefully care for their shoes and strive to maintain their appearance throughout their life. Shoeguard pieces are made from natural Canadian cedar. Its wood:

• gives the holders a rich aroma of fresh wood;
• eliminates unpleasant odors;
• prevents the development of harmful microbes.

A special feature of this model is the spring in the heel and front of the boot, which allows you to adjust the holder for any foot.

• Made from natural wood;
• can be applied even to men's boots of the 44th size;
• good workmanship;
• help to maintain the appearance of boots;
• do not change the shape of the shoes;
• quickly absorb moisture;
• pleasant smell of wood;
• springs in the front and rear;
• near the heel there is a handle that allows you to effortlessly pull out or insert the block;
• long service life.
• convenient to use.

• Low quality fittings;
• high price.

Movement type	metal rod
What is made of	Beech
The size	43-44 cm
average price	2964 rub

DASCO

An offer from an English company, when creating the last, beech was used, which will give the product a perfect shape, which allows it to completely fill the toe of the shoes. The design is made of dense wood, due to which it has a more thorough processing. The entire holder consists of two parts:

• heels.
• and toe half, which is also divided in half.

Both parts are interconnected by a metal rod, and in the bow of the product there are as many as 2 such fasteners, which allows the use of holders up to the indicated size.

• The heel has special recesses so that the design can be grabbed with several fingers at once for extraction;
• natural material;
• well-defined form;
• quality basis;
• well made;
• serve for a long time;
• there is an antibacterial effect;
• Helps dry shoes quickly.

• High price.

Movement type	metal rod
What is made of	Beech
The size	43-44 cm
average price	2964 rub

The best novelties with a simplified back

Mold holder for men's shoes

This option is perfect not only for long-term storage, but also for daily use. The holder has a hollow front part that does not come into contact with the insole of the boot, as well as the most simplified heel - just the end of a metal spring with a plastic rounded plug. Such products will save shoes from deformation, preventing wrinkles or stretch marks from appearing. And also they can completely restore the original look of the shoes with daily use.

• The design allows you to extend the service life of the model;
• based on high-quality plastic;
• suitable for men's shoes of large sizes;
• well made;
• can be used daily;
• easy to apply;
• maintain a neat appearance of boots;
• boots are not deformed;
• smooth out the nose.

• Not found.

Movement type	spring
What is made of	metal/plastic
The size	39-44 cm
average price	399 rub

SALRUS YF005

The presented accessory allows you to stretch, natural models made of thin leather, almost 1 size. This spacer option helps to increase the length and width of the shoe.It is equally suitable for suede shoes with a flat sole or with a 5-6 cm heel.

• Accessories are supplied in the kit;
• there are orthopedic inserts;
• possesses the absorbent properties of wood;
• can dry shoes;
• there are additional elements that allow you to increase the width of the boots, even if the foot has features;
• universal model that can be used for left or right boot.

• More suitable for classic shoes, it is difficult to insert into winter options;
• not intended for stretching thick leather shoes.

Movement type	Screw
What is made of	Wood
The size	41-44 cm
average price	675 rub

Easy Store

Blocks for men's shoes made of durable plastic in bright yellow color will allow not only to maintain the initial appearance of the shoes, but also to stretch them. For example; if you have an unusual shape of the feet.

• This option is equipped with orthopedic pads;
• can increase by 0.5 or 1 cm;
• high-quality plastic;
• there is a convenient handle-holder;
• can be used for both left and right shoes;
• adjustable in width
• there is a detailed instruction on how to make the shape holder more comfortable for your foot;
• all necessary fittings included.

• Only for men's boots;
• flimsy;
• Few mounting holes.

Movement type	Screw
What is made of	Plastic.
The size	40-46 cm
average price	1389 rub

lady comfort

A variant from one of the best German companies Collonil is a plastic spring-loaded mold holder, which is equally well suited for women's dress shoes and sports shoes.The company actively uses natural impregnations in its work, which helps to preserve the product from the inside. And the evenly spaced toe vents on the brace keep your shoes constantly ventilated.

• Made from high quality plastic;
• removes wrinkles and creases, helping to return the former look to your favorite shoes;
• the product is not deformed and does not spoil the shoes.
• a good option for long-term storage of suede shoes;
• the model is easy to use;
• can be used even when wet cleaning.

• Do not stretch boots.

Movement type	spring
What is made of	metal/plastic
The size	39-42 cm
average price	1580 rub

Variants consisting of only 1 element

Sneaker Shields

This analogue is suitable both for wearing with shoes and for storing them. The spacer is made of high-quality plastic with holes evenly spaced across the width of the toe, which ensures timely access of air to the surface of the boots. The functionality of this accessory includes the fight against possible bends and creases on the outside of the shoes.

• The base of the elastic material does not interfere with walking;
• equally good for both parties;
• there are two color shades;
• products, if necessary, can be cut by yourself;
• suitable for sports shoes;
• long service life;
• good to use for children's shoes;
• also relevant for warm models.

• Not identified.

Movement type	Not
What is made of	Plastic
The size	36-45 cm
average price	315 rub

Domopak Living 911032

This is a simple form holder for the inside of the shaft that helps keep them in a standing position.It does not allow creases to form, and also maintains a neat appearance of large or medium boots. The product bends well, it can fit even in small shoes.

• The holder is made of high quality modern material;
• block is easy to use;
• serves for a long time;
• will help to keep even warm shoes;
• the model bends well;
• can be cut to your taste;
• in a set of 2 pairs.

• Colorless;
• easy to lose.

Movement type	Not
What is made of	Polypropylene
The size	26 x 44 cm
average price	585 rub

Saphir

The model from the French manufacturer of mold holders and accessories for shoes is completely devoid of a heel counter. The block is just one nose piece with a plastic handle for ease of use. However, even such a small spacer from Saphir (Sapphire) is able to maintain the original shape of women's or men's shoes:

• sandals;
• boot;
• boot.

• A soft, but rather elastic product helps to straighten shoes made of fabric and even thin leather;
• it consists of eco-friendly material;
• no foreign smell;
• does not allow shoes to wrinkle;
• straightens insoles;
• you can choose the color of the spacer;
• There are medium and small sizes;
• are anatomically correct.

• High price.

Movement type	Not
What is made of	Foam
The size	35 to 40 cm
average price	2044 rub

Outcome

Concluding this rating of shoe mold holders, I would like to note that the lasts are not only functional but very necessary accessories for care. They also help to maintain the impeccable appearance of products, extending their service life.Meanwhile, in 2022, the popularity of models is noticeable.

1. From foam rubber - people prefer to take pads on a trip or business trip;
2. Plastic mold holders - not only can these holders be taken on the road, they are also suitable for daily use and for long-term storage. Such pads do not differ in any special functions, but they are affordable.
3. Made of wood - this option, although it costs more than previous models, has a lot of useful advantages, they are considered the best struts today. Among the blocks of this material can be found:

• budget models with a heel on a spring;
• expensive analogues that completely repeat the boot, which affects their effectiveness.

And with the proper skills, you can even make it at home, step-by-step instructions with a detailed video lesson can be easily found on the Internet. However, the decision on which option is better, and whether to buy or make a homemade form holder, is up to you. The purchase of a shoe, no matter how much it will cost, will provide an opportunity to get an effective assistant in the care of seasonal boots and shoes. According to buyers, the long service life of the product will not allow you to regret the money spent.