Ranking of the best pressure washer filters for 2022

High pressure washers, like any complex technical equipment, have unique functionality and specifics of use. In this case, the most important role is played by inconspicuous elements and accessories - water purification filters. It is thanks to such small devices that the long-term and efficient operation of the entire unit is ensured.

The main criterion for choosing a product is the characteristics of the purchased product. However, this raises many questions, the answers to which can only be given by users of such devices - maintainability, reliability, parameters corresponding to the declared ones. This review is based on the popularity of models, according to buyers, as well as their characteristics. It will help you choose high-quality accessories for washing equipment.

What is it - purpose and device

Filter for high pressure washer - a device for purifying the water entering the unit from foreign substances - dirt, sand, hard salts and chemical elements.

The main purpose is to prevent the penetration and settling of harmful substances on the surfaces inside the product to prevent breakdowns and increase service life.

They may have different design features, but the principle of operation is almost the same. A removable element is installed inside in the form of a disk, cartridge or metal mesh for cleaning. There is also a branch for the collection of collected contaminants. To reduce pressure, it can be produced together with a reducer.

After each use of the washing equipment, the filter must be cleaned!

Kinds

1. Preliminary (rough) cleaning.

They are installed to trap particles that cannot be dissolved - corrosion, loam with sand, etc. Considering that water is taken from tanks or mains that do not contain large contaminants, such devices are not used very often.

2.Deep (fine) cleaning.

They are placed in high-pressure apparatuses for the retention of suspended substances with sizes from five micrometers (insoluble or soluble) - the smallest organisms, chemical compounds or metal particles with a large atomic mass.

Criterias of choice

Models differ in the following parameters:

1. Outlet / inlet thread - the value must correspond to the thread on the nozzle, otherwise it will not work to put on the unit. Standard value is ¾ inch.
2. Maximum pressure - measured in bar, the value must not be less than the washing pressure, otherwise the device will fail. As a rule, it is in the range from six to 20 bar.
3. Maximum temperature - indicated in degrees and indicates the permissible temperature for using a particular product. Models are available only for cold water or for hot water with a certain temperature. Usually it is not more than 40-60 degrees.
4. Filtration capacity - determines the ability to retain dirt and is measured in micrometers (old - microns). The lower the minimum value, the better the quality of water purification. For the first stage, at least 50 micrometers is enough.
5. Productivity - determines the throughput of the device in liters per minute.
6. Material - usually produced in a plastic case, sometimes with metal inserts.

What to look for in order to avoid mistakes when choosing:

• the device must be collapsible so that it can be easily removed and washed;
• there is a possibility of repeated use for operation for a long time;
• universality for use on units of different manufacturers in case of replacement of washing equipment.

Operating rules

1. Before cleaning the cartridge from contaminants, the device must be dried, then the dirt must be removed.
2. A hard metal sponge or brush will damage the cellular structure of the mesh and reduce the filtration capacity. In addition, if a foam nozzle is used, the quality of the foam will deteriorate.
3. When taking water from a natural reservoir, a coarse (preliminary) filter must be installed at the end of the inlet hose.
4. If the metal mesh is damaged, the cartridge must be completely replaced.

Where could I buy

High-quality popular models and novelties can be bought at sales offices of high-pressure washer manufacturers, or specialized stores selling accessories, components and consumables, as well as garden equipment. There the best products can be seen, touched and tested. At the same time, managers will give valuable advice and recommendations - what products are there, which company is better to buy, how much this or that product costs.

In addition, the necessary parts can be freely ordered online in the online store or on the pages of the Yandex.Market aggregator, where the best manufacturers and samples are presented, as well as characteristics, equipment, descriptions and photos with a direct link to the seller’s website, as well as reviews buyers.

The best pressure washer filters

The rating of high-quality devices was developed on the basis of popularity according to the opinion of users of the Yandex.Market aggregator. The review includes inexpensive models costing up to one thousand rubles, budget devices of the middle price segment at a price of up to two thousand rubles and a premium class at a price of more than two thousand rubles.

TOP 5 Best Inexpensive Filters

ZUBR 70402

Brand - Zubr (Russia).
The country of origin is China.

Fine cleaning product to protect the high-pressure apparatus from foreign suspensions in the water. It is mounted using the connector included in the kit, on the inlet pipe ¾ inch. A hose with a maximum diameter of ½ inch can be connected. Detachable design for easy cleaning. The filter element does not require replacement. Is suitable for all models of sinks of the Zubr brand.

• complete with quick-release connector;
• great quality;
• convenient use;
• collapsible design;
• good nut nut
• low price.

• small mesh area.

KARCHER 2.642-794.0

Brand - KARCHER (Germany).
The country of origin is China.

Chinese-made cleaning device to prevent foreign particles in water from tanks, barrels or natural reservoirs from entering the washing unit. Significantly extends equipment life by protecting against contaminants. The strong thick-walled body has good wear resistance and serves for a long time. The condition is visually controlled through a transparent flask without the need to disassemble the nozzle. Easy to clean with detergent and warm water. Compatible with all brands of sinks Karcher K2 - K7.

• small dimensions;
• fine mesh section;
• easy connection;
• convenient packaging;
• universality;
• collapsible design;
• visual control of the degree of contamination;
• plastic case;
• good wear resistance;
• tight connection

• overpriced.

Video review:

CHAMPION C8115

Brand - CHAMPION (Russia).
The country of origin is China.

Chinese-made fine purification device for water entering the high pressure washer.Prevents ingress of foreign particles and suspensions into the unit. Installed on the inlet pipe. Rubber gaskets seal all interfaces. It connects to the hose with a standard garden "quick coupler". The collapsible design makes it easy to clean the cartridge under running water. Allows to considerably increase a working resource of the pump of the device. The popularity of the models is due to the versatility for the entire CHAMPION range.

• well purifies water from pollution;
• simple design;
• collapsible;
• easy cleaning;
• long service life;
• suitable price.

• not detected.

Bosch F016800284

Brand - BOSCH (Germany).
Country of origin - Italy.

Replacement appliance made in Italy for all models of BOSCH Aquatak sinks. When working, it performs good filtration of incoming water. The application ensures a long service life of washing units. The absence of the device may void the warranty of the washing equipment.

• simple connection;
• excellent filtration;
• collapsible design;
• easy cleaning;
• good wear resistance;
• quality manufacturing;
• versatility for brand sinks.

• not detected.

PATRIOT GTR 100

Brand - PATRIOT (USA).
The country of origin is China.

A Chinese-made water pre-treatment product under an American brand for household and professional high-pressure washers. Installed in front of a sink with a 1 inch connector. Can be easily removed and disassembled for cleaning. The robust housing ensures a long service life.

• good water filtration;
• universal application for various brands of sinks;
• collapsible design;
• transparent flask;
• easy cleaning;
• durable plastic case;
• long service life;
• quality performance.

• not identified.

comparison table

	Bison 70402	KARCHER 2.642-794.0	CHAMPION C8115	Bosch F016800284	PATRIOT GTR 100
Thread, inch	3/4	3/4	3/4	3/4	1
Temperature max, deg.	60	60	60	60	60
Pressure max., bar	12	12	12	12	12
Dimensions (LxWxH), mm	140x90x50	119x50x50	120x50x50	130x50x50	199х97х48
Weight, g	80	73	84	100	80
Warranty, months	6	12	12	12	12
price, rub.	168-310	579-888	145-190	539-1016	267-513

TOP 4 best filters of the middle price segment

COMET FR10034

Brand - COMET (Italy).
Country of origin - Italy.

Inlet water filter for use in professional pressure washers. Good cleaning power of 100 microns with a capacity of 55 liters per minute. Robust housing with a transparent flask for visual control of the degree of contamination. Detachable design for easy flushing.

• universality;
• reliability;
• good throughput;
• wear resistance;
• easy cleaning;
• long service life;
• excellent value for money.

• not detected.

BOSCH Professional F016800334

Brand - BOSCH (Germany).
Country of origin - Italy.

Made in Italy product for installation on professional high-pressure washing equipment. Installed from the outside. Designed to prevent foreign particles from entering the unit and preventing its failure. The strong plastic case provides long operation of the device. In stores it is offered at an average price of 1600 rubles.

• good water purification;
• reliability;
• quality manufacturing;
• long service life;
• durable plastic case;
• collapsible design;
• easy cleaning.

• overpriced.

Makita HW41161

Brand - Makita (Japan).
Country of origin - Japan.

Universal accessory for use in Makita professional high pressure units. Durable material ensures long service life. The folding design provides easy and fast cleaning of dirt. A wide range of prices allows you to find a device for sale at the lowest price.

• durable case;
• long service life;
• high degree of water purification;
• collapsible design;
• universality;
• easy to clean;
• excellent price-quality ratio;
• small sizes.

• not detected.

Bosch F016800440

Brand - BOSCH (Germany).
The country of origin is China.

Large capacity device to minimize the entry of dust, sand and other foreign particles in the water into the washing equipment. It is installed on the inlet pipe. Prevents clogging of the pump and prevents failure of the unit. Tightness and protection of the hose against leaks is provided by a sealed sealing ring. The collapsible design allows you to quickly rinse the device in running water and clean it from dirt. Chinese counterparts are much cheaper than original products.

• simple use;
• durable transparent case;
• long service life;
• large volume;
• good tightness.

• not detected.

comparison table

	COMET FR10034	Bosch Professional F016800334	Makita HW41161	Bosch F016800440
Thread, inch	3/4	3/4	3/4	3/4
Temperature max, deg.	40	60	60	60
Pressure max., bar	10	12	12	12
Dimensions (LxWxH), mm	105x75x115	140x80x70	90x60x60	160x70x70
Weight, g	164	150	200	180
Warranty period, months	12	12	12	12
price, rub.	1220	1500-1600	1290-1860	958-1070

TOP 3 best premium filters

KARCHER Perfect Connect 2.997-211.0

Brand - KARCHER (Germany).
The country of origin is China.

Product for coarse water treatment for placement at the inlet of washing equipment without an integrated filter. Prevents pump contamination with sand and foreign particles of dirt up to 250 microns in size, increasing the life of the unit. The capacity is about 4000 liters per hour. The cartridge is easy to get to clean from dirt. Durable plastic housing ensures a long service life.

• removable cartridge, easy to clean under running water;
• small sizes;
• collapsible design;
• transparent flask;
• simple connection;
• long service life;
• quality manufacturing.

• high price.

Kranzle 13.300 3

Brand - Kranzle (Germany).
The country of origin is Germany.

Universal device for fine water purification for use in Kranzle brand units. Avoiding the ingress of foreign small particles up to 60 microns in size and contaminated suspensions increases the service life and prevents failure of the washing equipment. Mounted on the inlet pipe with a threaded connection. The outlet and inlet channels are made of brass, and the replaceable cartridge is made of steel.

• quality performance;
• durable case;
• high filtration capacity;
• collapsible design;
• easy cleaning under running water;
• the possibility of separately purchasing a replacement cartridge.

• not detected.

KARCHER 4.730-102.0

Brand - KARCHER (Germany).
The country of origin is China.

A type of fine water treatment device used in pressure washers. Installed on the inlet pipe with the function of protecting the unit from particles up to 125 microns in size with a throughput of up to 1200 l / h.Able to double the service life of washing equipment. The collapsible design allows you to easily and quickly clean the device from dirt. Suitable for all KARCHER models.

• good water purification;
• collapsible design;
• easy to clean under running water;
• additional adapter 1 inch;
• long service life.

• not detected.

comparison table

	Karcher Perfect Connect 2.997-211.0	Kranzle 13.300 3	KARCHER 4.730-102.0
Thread, inch	G1	3/4	3/4; 1
Temperature max, deg.	60	60	50
Pressure max., bar	12	12	12
Dimensions (LxWxH), mm	120x220x200	100x50x50	200x180x75
Weight, g	815	300	302
Warranty period, months	12	12	12
price, rub.	3910	2340	2000-2533

Self-manufacturing

If it is impossible or unwilling to buy branded filter elements, you can make a home-made device at home with your own hands, for which you need a set of components:

• plastic bottle;
• lid with cut top;
• hose;
• hose connector;
• female kapron stocking.

Step-by-step instructions on how to make a filter device include the following steps:

1. Cut off the plastic bottle and insert the hose into the neck through the hole in the cap.
2. Put on the hose connector.
3. Pull the stocking over the cropped bottle.
4. Screw the cap onto the neck, securing the structure.

The hose does not enter the bottle tightly so that when lowered into the barrel, the filter does not float, and the remaining air comes out of the neck.

After immersing such a home-made device in a container of water and taking it for the operation of washing equipment, a rough cleaning will be performed.

Enjoy the shopping! Take care of yourself and your loved ones!