Rating of the best shower trays for 2022

A shower tray is an integral element of a shower cubicle or corner. It is he who largely affects the comfort when taking an invigorating or relaxing water treatment. For the manufacture of pallets, a variety of materials are used: acrylic and cast iron, steel and faience, and even natural stone, or glass, or wood.

Choosing the Right Shower Tray

The shapes and sizes of pallets are presented on the market by manufacturers in a large assortment, so finding the right option will not be any difficulty. A well-chosen pallet will add coziness to a small bathroom or give an aesthetic appearance to a more spacious room.

A shower enclosure can be built almost anywhere in the bathroom. The main priorities will be its dimensions and configuration. In small areas, experts advise mounting models in the form of corners. In the case when the bathroom area allows, then this accessory can be mounted even in the center - the main thing is that there are no obstacles for plumbing communications. Such cardinal changes are typical for global redevelopment or for major repairs.

Without a doubt, the fact remains that the larger the bowl of the pallet, the more comfortable the acceptance of water procedures. As a standard, this size is selected for the largest member of the family. If it is wrong to navigate this issue, then it is possible that someone will have to take a shower in an extremely uncomfortable position. For a Russian ordinary apartment, a square-shaped pallet with dimensions of 80 by 80 centimeters is considered optimal.At the same time, it is necessary to take care of the depth of the bowl - the higher its sides, the more inconvenient it will be to enter it (this will create a special problem for sedentary family members and children).

At the same time, the installation of a flat pallet sample is associated with some problems. Usually, the socket of the sewer pipe is located slightly above the ceiling. But this problem can be solved in two ways: to raise the floor level by at least 20-30 centimeters, or to purchase a special small-sized pump - a sololift.

Production material

Cast iron

A product made of this material is likely to last a very long time, however, its enameled coating will be damaged much earlier. It can be said without a doubt that in a year or two a technically sound cast-iron pallet will have an unpresentable appearance. In addition, cast iron alloys themselves have poor thermal conductivity, therefore, before taking a shower, the product should be doused with a jet of hot water. And to top it all, the extremely large mass makes this item very inconvenient for transportation and subsequent installation.

Steel

Models from this material are much lighter than those from the above. Their modern designs are mounted on a frame with special legs that allow you to adjust your own height. They are of two types:

• Thin-walled - for such, the thickness of the bottom and sides does not exceed one and a half millimeters, they are quite light, but they create a fair amount of noise when a jet of water hits them;
• Thick-walled - their thickness of the entire body can be 3.5 millimeters or more, they are slightly heavier than the previous ones, but they produce little noise from water jets.

NOTE: it is still possible to find a thin-walled model with good sound insulation on the market - at present, manufacturers equip such samples with rubberized inlays treated with polyurethane foam to reduce noise.

However, the main disadvantage of steel models is the high probability of chipping of the enamel coating during excessive mechanical shocks, which in the end will inevitably lead to corrosion.

Acrylic

Acrylic pallets are characterized by their aesthetic appearance, they are light in weight and relatively inexpensive. It should be noted that products made from this material are extremely sensitive to high mechanical loads - dents, chips and even holes are formed almost instantly. However, minor scratches are very easy to repair, while more serious ones can be repaired with a special repair kit. As a rule, they have a load limit and it should not be more than 130 kilograms. The strength of this product can be increased by reinforcing and the thicker the layer will be, the stronger the product will become. A metal frame or a support made of polyester-based polyurethane foam can also prevent premature deformation of the object.

Ceramics

A model made of such material can be successfully combined with other faience items in the bathroom. Usually they are available in two colors - white or beige, but if desired, you can find other "cheerful" colors. Despite some massiveness and special stability of such specimens, ceramics is an extremely fragile substance. If you drop any heavy or large thing on it, then the probability of breaking the pallet is very high. In addition, it will not be possible to repair it - a complete replacement will be required.From this it is clear that the installation of a ceramic object will require an almost perfectly flat surface. To be honest, it is worth mentioning that porcelain analogues can also be used (considerable strength, presentable appearance, improved quality), but they will cost much more.

Fake diamond

There is no doubt that such exclusive models will decorate any bathroom. A variety of fillers used in conjunction with polyester resin will result in a very durable shower fixture with excellent noise-absorbing characteristics, resistant to chemical and mechanical stress. In addition, the choice of color range is very wide: emulation of a marble or wood surface is also possible here. Among other things, the material is designer and allows the latter to produce truly unique products.

Natural stone

It is used exclusively for design projects, in this case, as a rule, travertine or marble with granite is used. These stones perfectly retain heat, are characterized by increased strength and increased service life. However, such shower cabin items are very massive and require an almost perfectly flat surface for installation. Nevertheless, their increased price is justified by a noble appearance, a degree of high comfort and extreme beauty.

Glass

Such samples are distinguished by external elegance and special grace. During production, they are treated with a special anti-slip coating and a special layer is applied to them to protect them from chips and scratches. Their assortment range is also distinguished by high fullness. Their main disadvantage is their high cost.

Wood

Really unique, very expensive and high quality examples of shower fixtures. They can be the perfect extension for bathrooms where walls are also finished in wood effect or with wood upholstery. Most often, either oak or larch is used in production, which are processed with high-pressure steam.

Sizes and shapes

A great variety of pallet forms will allow any buyer to choose a model according to their own taste. But still, often, when choosing, you have to rely not on your taste, but on the area of ​​\u200b\u200bthe bathroom and its other features (after all, these rooms in ordinary Russian apartments are rather modest in size).

Angle shapes

When choosing such samples, it is possible to immediately get double savings - to “win back” the extra meters in area and not to mount the walls of the shower stall separately. Angular shapes include:

• Square samples - regardless of the material of production, they have typical sizes of 70-100 centimeters with a 5-centimeter step. There are also the most spacious models with sizes from 110-130 centimeters, however, they do not find much attention among buyers;
• Rectangular swatches are one of the really popular patterns because they are easy to make in various dimensional proportions. They are compact and ergonomic, convenient for taking a shower;
• Radial samples - they represent one fourth of the circle and are mounted in the corner of the bathroom. Their use is extremely advisable in rooms with very small areas, and at the same time, with their rounded part, they give the bathroom some aesthetics. Their sides can be either equal or different (as in a rectangle);
• Pentagonal patterns (pentagonal) - they have one 90-degree angle and can also be placed in small areas.

Forms are complex

These include the following models:

• Semicircular - the flat part is tightly adjacent to the wall of the bathroom (they cannot be used in corner boxes);
• Round - as a rule, they are installed in a rectangular or square base, but they can also serve as a podium for a traditionally round booth;
• Oval - ideal when the shower space is not cramped in size;
• Polygonal - extremely rare, mainly used in design projects;
• Irregular (asymmetric) - characterized by very complex bending lines. They are made mainly according to design drawings, they can have arbitrary styles and color solutions (the option stylized as a heart is popular).

Recommended pallet height

This factor can be extremely different - from almost zero height (almost the same level with the floor) to very high rates - from 25 to 45 centimeters. The latter, in principle, form a small bathroom bowl and the exit / entrance to them is somewhat inconvenient, so it would be more expedient to build small steps and cover them with anti-slip material. At the same time, in a deep tray, you can easily wash or bathe a small child (especially since they are usually equipped with a special seat).

There are also products that, at first glance, have no sides at all and in rare cases the depth of their bowl reaches 4 centimeters. And yet, and for them it is possible to veneer the sides with tiles or tiles. These shallow pallets are necessary for people with disabilities.

The most common option today is considered to be models with a bowl from 5 to 20 centimeters (perfect for people who are used to having their feet in the water during the shower).

Doors and railings

Naturally, if you equip a shower stall, you will have to purchase fences or doors. However, there are some nuances here:

The use of special glass is due to the fact that elements made of plastic and other polymers are more scratched, burst for no apparent reason, and difficult to clean. Despite their cheap cost, they quickly lose their presentable appearance;

The use of aluminum and stainless steel - these materials are best used for doors - this will increase both strength and service life. It should be noted that it is not worth using ordinary steel, because it is prone to fast corrosion processes.

IMPORTANT! The use of glass doors and railings is also good because they are easier to care for. Especially in this regard, frosted glass is unpretentious - it leaves almost no streaks and is well laundered. It is necessary to apply a decorative pattern only from the outside, because inside it will be clogged with dirt.

Shower Tray Safety

The main safety feature of a pallet is that its bottom does not have to be completely smooth. Otherwise, the risk of slipping and falling increases significantly. But there are also models with absolutely smooth bowls on the market. In this case, you can buy special corrugated stickers for the bottom, or a plastic grill is installed there. Nevertheless, even a smooth surface is now treated by manufacturers with a special anti-slip compound, but such a coating should be updated about once every five years.

Usually the safety of a pallet product is achieved by means of a corrugated surface of its bottom - the pattern can be made in the form of floral patterns, crosses / rhombuses. In addition, this pattern will carry a massage effect when taking a shower.

Optional accessories

These can be called:

• Siphon cover - it is either supplied with the equipment or purchased separately. It has an additional aesthetic value, closes the drain hole;
• "click-clak" system - thanks to it, you can open and close the water drain without using your hands - the siphon cover is raised / lowered by pressing your toes;
• Dedicated seat - usually fitted with high side pallets where it is built-in. And for low models, removable / installed options are provided;
• Anti-slip coating - adds safety in the process of using the product (sometimes a plastic grill or rubber mat can act instead of it).

What makes up the cost

The price of the device in question will depend on many parameters, and a potential buyer needs to be prepared for a wide range of prices. The following factors will play a significant role in pricing:

• Country of origin - Asian designs are much cheaper than others, and the reason for this is cheap labor, and this immediately affects the quality. The countries of Eastern and Southern Europe offer products of the middle price segment. But manufacturers from the "old world" (Germany, Italy, Spain, England) produce a product of the highest quality, distinguished by elegance and a high technical level;
• The name of the company (“brand”) - it is natural that the more famous the name, the more the company is responsible for its products in terms of quality. An experienced manufacturer is always trying to improve the production technology by applying all kinds of innovations and improving the design. From this it is clear that pallets from a company with a global reputation will cost many times more than from a "know-name" brand;
• Production material - budget options are made of steel, sometimes even NOT stainless. Subsequently, they will require additional protective coating. The most expensive items are made of wood, special glass or natural stone. The "golden mean" can be called ceramics or acrylic;
• Shape - the cheapest are square shapes, because they are easiest to make by stamping. The most expensive - asymmetric - they require almost manual work;
• Dimensions - in this case, the statement will be true that with an increase in dimensions, the price also increases. And here you can add depth - the more it is, the more expensive the product;
• Place of purchase - the price of goods in a specialized store will be clearly higher, but there the quality is guaranteed to the buyer. But on the market everything will cost much cheaper, but, accordingly, there will be no guarantees. However, it is always possible to use trusted online sites for purchases.

Rating of the best shower trays for 2022

Budget segment

3rd place: BLB CF70 Universal

Standard and high quality shower tray made in Portugal. Easy to install, has a variety of models on the sides of the square, the safety of use is ensured by floor notches. In addition to anti-corrosion enamel, it also has an anti-slip coating.

Name	Index
The form	Square
Mounting method	station wagon
Material	Steel + enamel
Additionally	Anti-slip surface
Dimensions, mm	700x700x135
Price, rubles	2100

• Economic cost;
• Sufficient protective coating;
• Easy installation.

• Used regular steel.

2nd place: LORANTO X-ray

Products from a leading Chinese manufacturer, has European certificates of conformity and environmental safety. During production, the latest technologies are used (for example, environmentally friendly enamel coating). The sample has a universal mount, its installation is not difficult. Fits perfectly even in a small bathroom.

Name	Index
The form	Radial
Mounting method	station wagon
Material	Steel + enamel
Additionally	Not
Dimensions, mm	800x800x135
Price, rubles	2600

• Environmental coverage;
• Convenient shape and size;
• Orientation to ultra-small areas.

• There are no additional options.

1st place: AQUA TORIA P909015

Pretty massive model with fairly high sides. Designed for a bathroom that is not cramped in area. Thanks to its stainless steel production, it can easily withstand temperatures of +75 degrees Celsius and a user weight of 150 kilograms. Extended 12 month warranty.

Name	Index
The form	Square
Mounting method	station wagon
Material	Stainless steel
Additionally	Not
Dimensions, mm	900x900x150
Price, rubles	3000

• Increased strength indicators;
• The use of "stainless steel";
• Current price.

• Not identified (for its segment).

Middle class segment

3rd place: River Light R

An excellent model that fully meets the parameters in terms of price / quality ratio. Acrylic housing guarantee long service life and low maintenance. High sides can be used as seats. In general, the bowl is suitable for light washing. Siphon size - 90 mm, you can install an additional accessory of the "click-clack" type. Manufacturer - Russia.

Name	Index
The form	Quadrant
Mounting method	station wagon
Material	Acrylic
Additionally	Integrated seat
Dimensions, mm	1000x1000x150
Price, rubles	5800

• Excellent value for money;
• Security built-in seat;
• Removable panel included.

• Not detected.

2nd place: Erlit ER 100H

Although this sample has small sides, it is extremely functional - its own height can be adjusted using special legs, the base itself can withstand weight up to 210 kilograms, the siphon at the base has a water seal. The work surface has a long-lasting anti-slip coating.

Name	Index
The form	Square
Mounting method	station wagon
Material	Acrylic
Additionally	"Click-clack" on the siphon
Dimensions, mm	1000x1000x150
Price, rubles	7100

• Multifunctionality and versatility;
• Special strength;
• Additional options.

• Very small sides (unlikely to prevent water from entering the floor).

1st Place: Royal Bath Bk RB90BK

A truly ergonomic and comfortable model from a Russian manufacturer. High sides do not allow water to splash, you can take a shower in a hurry, or you can comfortably sit on the built-in seat.Can be used as a bath for small children. It has additional shielding and an extra-long warranty - 10 years!

Name	Index
The form	Radial
Mounting method	station wagon
Material	Acrylic reinforced
Additionally	Shielding
Dimensions, mm	900x900x330
Price, rubles	11500

• Very long warranty;
• Reinforced additives acrylic material (increased strength);
• Great depth.

• Far from a big price.

Premium class

3rd place: RGW Stone Tray ST-0128

A good model made of artificial marble, has an exclusive design solution. More suitable for bathrooms where there is no need to save space. Thanks to the small sides, the comfort when taking water procedures will become even better. The pallet is suitable for all family members.

Name	Index
The form	Rectangular
Mounting method	Professional
Material	Fake diamond
Additionally	Shielding
Dimensions, mm	1200x1200x250
Price, rubles	18500

• Noble appearance;
• Big square;
• Suitable for people with disabilities.

• Difficult to transport;
• Requires professional installation.

2nd place: Jacob Delafon Flight

Another expensive model for large rooms. Despite its size, it does not require professional installation, it can be installed independently. Small boards do not allow splashing water, reliably holding all moisture. Production material - reinforced acrylic, provides good sound insulation.

Name	Index
The form	Rectangular
Mounting method	station wagon
Material	Reinforced Acrylic
Additionally	"click-clack" siphon
Dimensions, mm	1000x800x40
Price, rubles	20000

• Composite material;
• Provided sound insulation;
• Additional options.

• Not detected.

1st place: WasserKRAFT Isen 80×80 26T00

A popular sample from a German manufacturer. Made in a radial shape and suitable for any available area. Execution material - reinforced acrylic. In addition, there are sliding legs, a siphon, an anti-slip coating.

Name	Index
The form	Radial
Mounting method	station wagon
Material	Reinforced Acrylic
Additionally	"click-clack" siphon
Dimensions, mm	800x800x175
Price, rubles	21000

• Compact forms;
• high sides;
• Sufficient depth.

• Not found.

Instead of an epilogue

You can buy pallets at any plumbing store - this will be a guarantee of quality. However, if an expensive sample is required, then in order to save money, you can order it on Internet sites. It is best to purchase directly from the manufacturer.