Rating of the best wood splitters for 2022

Any type of firewood is suitable for keeping a fire burning. It is better to heat a stove or fireplace with small logs. To harvest them, you need a good ax. This is the most common household tool. It takes a lot of effort to prepare firewood for the whole winter. After cutting the stumps, calluses may appear on the hands, and the back of many begins to hurt. There is a way out. Modern technologies make it possible to automate this hard work. A wood splitter will come to the rescue.

A wide range of manual and electric wood splitters is presented on the modern market. These devices make the job easier. They will help you get a lot of work done in a short amount of time. The tool minimizes the physical burden and saves a lot of time. There will be no need to swing a heavy ax or a cleaver, cutting thick stumps. The hydraulic device will do the most difficult work. It will split a tree of any diameter into identical logs.

The editors of the site have compiled a rating of the best wood splitters.Experts took into account the reviews of professionals and the opinions of ordinary users. Based on them, recommendations are made that will help you make the right choice. There are a large number of manufacturers from different countries on the market that compete with each other. The best models were selected, which are worth focusing on.

The device and principle of operation of the wood splitter

The unit has a solid frame on which the knife is attached. He plays the role of a powerful cleaver. The knife will cut any block of wood into logs of the desired size. It is driven by a hydraulic piston and actuator. It remains for a person to serve hemp under the knife. The necessary load is created by hydraulics, which is driven by the power unit. A special piston pushes the wooden log onto the knife edge.

This principle of operation is embedded in the devices by a large number of manufacturers. In stores, you can find cone-type screw wood splitters, etc. Such devices are in demand due to their reliable design and ease of operation.

Recommendations for choosing a wood splitter

Construction type

In the most common units, the tree splits due to the movement of the hydraulic piston, which crushes the workpiece against a metal knife. After that, it breaks into pieces. The necessary force is generated by the engine.

The screw cleaver also has many fans. Such a unit can be built with your own hands. In this case, the working element has the shape of a screw cone. The motor drives it. When the workpiece is fed, the cone is drilled into dense layers of wood and breaks it into several parts.

The design of the rack wood splitter is quite simple. However, this type of wood splitting is considered dangerous. In this case, the workpiece moves due to the rotation of the gear.

The principle of operation of an inertial or spring wood splitter is somewhat different. All drive options are missing here. Chopping firewood is carried out due to the large shoulder and the spring, which returns the working bar to its original position.

Drive unit

On sale there are units with electric motors and gasoline motors. The buyer needs to determine the conditions under which the wood splitter will be operated.

Maximum workpiece pressure

The force with which the piston acts on the workpiece depends on this value. This characteristic is inherent in rack and hydraulic wood splitters. At home, an effort of 4 to 6 tons is enough. More powerful units are used in industrial enterprises. They can work with large logs.

Working position

This parameter is responsible for the position of the axis of the workpiece during operation. There are units with vertical, horizontal and combined orientation. The second option can be attributed to the most common type.Buyers buy it for its simplicity of design and ease of use. Such hydraulic and rack and pinion devices have high safety.

Stump size

The length of the blanks is determined by the amount of piston free travel and the maximum splitting force. The thickness of the hemp ranges from 0.25 to 0.5 m. Its length is limited to 0.52 m. It all depends on the model and type of installation.
In rack and pinion machines, the length of the workpiece determines the size of the rack in combination with the maximum force generated.
Screw wood splitters are not used so often. However, they can be used to break stumps up to 0.7 m in diameter.

Availability of options

On some units, the height is adjustable. This is done for convenience during work. A person can set the height to the size of the workpiece. However, the cost of the product increases. If necessary, you can come up with homemade coasters.

It does not interfere with the presence of wheels on the unit. This option will allow you to easily move the device around the territory. It must be borne in mind that large diameter wheels are much more convenient than small ones.

The machine must have a security system (most often with two levers). All manufacturers equip their units with this option. It is a mandatory component of factory devices.

For many users, speed is of great importance. However, experts believe that the minimum values ​​​​of this parameter are sufficient for working at home.

The best vertical fixtures

The device has a compact size and does not take up much space. It can be placed in a small room. However, during operation, it is necessary to strictly observe safety precautions. The stump should sit flat on the work surface.

Nylga Mechanical Plant SDK-1

The frame of the product has impressive dimensions. This makes it possible to split large logs, large stumps and bars on the machine. A belt drive drives a conical drill, which breaks the supplied workpieces into pieces. Many users upgrade the unit themselves. To do this, they improve inertia and reduce the load on the engine. An automobile wheel is attached to the hub. It acts as a flywheel.

Powerful legs are attached to the wide body. They add stability on flat ground. The base is covered with high-quality paint, which will protect the metal surface from corrosion and ensure a long service life of the product. The unit is suitable for quick preparation of firewood for the winter. He will quickly split hemp and chocks into logs of the right size.

• ease of assembly and durability;
• sufficient power;
• ease of use;
• wide bed.

• high price.

Champion LSV6000

The device is equipped with an adjustment of the position of the bed, which can be changed depending on the size of the logs. The function ensures high performance of the wood splitter. It is convenient to work on the machine, because it contains a minimum number of controls.

The three-dimensional frame is equipped with legs, which guarantee the stability of the structure during operation. The handles do not slip in the hands. The unit is equipped with wheels of impressive diameter, which ensures easy movement of the structure from one place to another.

The base is made of durable iron, which is resistant to deformation. This guarantees a long service life of the product. The machine can split workpieces up to 107 cm long. It is suitable for large-scale procurement work.

• sufficient power of the power unit;
• the device is convenient to move around the territory;
• The frame is made of durable steel, which ensures a long service life.

• very noisy work.

Greenween GW-DR1-T

The steel case is treated with a special paint that is resistant to moisture and temperature changes. The coating will protect the metal from corrosion. The product can be used in any conditions. It has small dimensions (350x280x280 mm). For storage and transportation, the kit comes with a special case made in the form of a tube.

Workpieces with a maximum length of 450 mm can be fed into the machine. There are holes on the frame with which the device can be fixed for safer operation. All cutting elements move. The bounding circle helps during work. All this makes it possible to gently split the hemp. The unit is ideal for harvesting firewood in the country or a country house.

• the machine is easily transported;
• has high security;
• there are additional holes for mounting to the surface;
• long service life.

• lumber instability.

Kolundrov "Stiletto"

The principle of operation of the machine is based on the concentration of impact force in one place. During operation, the load on the spine and lower back of the user is reduced. A person can chop wood for a long time without getting tired. The unit separates the supplied workpiece into 4 parts. The design is made in such a way that it will protect the worker from injury. The upper ring of the device will prevent the spread of chopped logs. It also protects sharp knives from accidental mechanical damage.

The wood splitter is light in weight. The device is made of St3 grade iron.It has an anti-corrosion coating, which consists of 8 layers. The device is equipped with a unique system of wedges, which separate the raw stumps with large knots into sections. The blades are very sharp. The frame is made in one piece, so it has a long service life. There is practically nothing to break. The impact-inertial system allows you to break the wood of any tree species.

• handles have a coating that does not slip well;
• small mass;
• high-quality protective paint and high structural strength.

• rapid wear of the working gasket.

Devices for chopping wood, in which the log is located horizontally

With these devices, the log is placed in a special groove. Such a wood splitter is considered the best in terms of safety and ease of operation. They are recommended for permanent use.

GOMARK-LANCMAN SL10

Slovenian manufacturer Gomark produces firewood splitters under the Lancman brand. Products have high strength characteristics, they are reliable, and they can be used for a long time. The SL10 wood splitters have received a lot of positive feedback from wood producers and charcoal companies. Work is provided with the help of electricity, engines running on gasoline. The operation of the device can be provided by a shaft responsible for taking power from tractors. Such a device shows high performance, it is comfortable to work with it. Consumers in many cities, from northern Arkhangelsk to southern Krasnodar, in the Kaliningrad region, Irkutsk and other regions, gave a worthy assessment to such devices.

• long period of use;
• high strength indicators;
• reliable device.

• not detected.

Belmash LSG-500 S115A

The model is equipped with large diameter wheels, with which it is convenient to transport it. One circle for which the splitting occurs is 1.5 seconds, which is a high result. The width of the table allows you to install logs with a considerable diameter.

The value of the maximum force reaches 20 tons, the power is 4800 W. The kit includes all the necessary parts to use the device. The case has high rates of resistance to mechanical stress. If a large load is created, the design of the support allows vibrations to be avoided.
The main purpose of this model is the industrial splitting of firewood and logs, the maximum diameter of which can reach 51 cm.

• rich set of delivery;
• the body is highly durable;
• has good performance;
• vibration resistance;
• good engine power.

• big sizes.

Champion LSH5001H

In the manufacture of the case, high quality steel and a special coating that protects against corrosion were used. You can move the device from place to place using the wheels with which it is equipped. The large support width makes it stable when splitting and parking.

The value of the maximum force is 5 tons, the allowable log length is 520 mm. With the help of a nozzle, splitting occurs immediately into 4 parts. High speed of work is reached by means of the asynchronous engine.

This wood splitter model has an increased service life, for this reason it can be used when working with strong wood species.

• the device is mobile;
• high-performance and powerful wood splitter;
• good hull strength properties.

• excess weight of the device.

RedVerg RD-LS 25-37E

The device has a ZHB control system, with which you can control its operation using both hands. When the lever is released, the machine switches off automatically. This mechanism provides a high degree of user protection. The ergonomic handle and decent diameter wheels make it easy to move the wood splitter. The device is capable of splitting logs 250 x 370 mm.

To make it more convenient to work with the wood splitter, the support element can be adjusted at your discretion. The design solution for placing the engine from below reduces the likelihood of damage to it and reduces the ingress of dirt. The power indicator of the device is 1500 watts.

This wood splitter is suitable for small volumes of wood splitting. It can be used for preparing firewood at home or in a small enterprise.

• ease of management;
• high strength index;
• vibration resistance;
• high level of user security.

• it costs expensive.

AL-KO LSH 370/4

This device has a special protective casing, which distinguishes it from analogues. The shroud provides protection from the user's flying wood chips and covers the working elements, increasing the level of safety reliability. Convenience of work is provided by a special stand for firewood.

A log can be installed on the wood splitter, the length of which does not exceed 370 mm. The device has a small size, so it can be easily placed in the right place.Convenient movement is ensured by special handles and wheels. The design has high strength indicators, during the manufacture it was treated with a special anti-corrosion compound. This increases the operational life of the device.
This model can be used when chopping firewood for fireplaces. It is well suited for home use.

• small size and mobility;
• good parking stability;
• the presence of a protective cover;
• high degree of security;
• anti-corrosion coating.

• makes noise.

Gorynych 6T

The junior representative in the line of hydraulic splitters produced under the domestic brand "Gorynych" is the device with the index 6T. Among its features, one can single out the piston stroke speed, which gives a good result. Such a device can be used when chopping firewood for sale, but at home such costs will not be justified.
The design withstands the uninterrupted operation of the wood splitter, almost without stopping, which allows you to chop large volumes of firewood. Knife adjustment makes it possible to quickly change the mode for two or four logs in one pass.

• the device is designed for a large amount of work;
• provides good performance.

• not detected.

Patriot CE 5215

With the help of the pusher of this device, the pressure reaches 4 tons. This allows you to split even hardwoods with a maximum log length of 520 mm. The design consists of a frame made by welding a metal pipe. The support stand provides good stability.The mobility of the wood splitter is achieved with the help of wheels.
The good length and insulation of the wood splitter cable make it possible to connect it to sockets at a distance, ensuring a high level of electrical safety. Small weight and dimensions make the machine easy to store and transport.
This model can be used in country or country houses on an occasional basis.

• low noise device
• small size and weight;
• good cable length;
• sustainability.

• fast heating.

Which wood splitter to buy

The main parameter of such devices is the force with which splitting occurs:

1. At home, a device with a force not exceeding 5 tons is suitable.
2. If it is necessary to provide a boiler room with firewood, then this figure rises to 7 tons.
3. When chopping firewood on an industrial scale, wood splitters with a force of up to 25 tons are chosen.
4. Preference is given to wood splitters that are powered by the mains. They are convenient to operate, work with such a device is possible even indoors. In the absence of electrical networks, in difficult conditions, devices operating on gasoline and diesel fuel are chosen. In everyday life, you can use a manual device.
5. When splitting hardwood, pay attention to what material the cutting element is made of. In such cases, preference is given to devices whose knives are made using hardened steels. Anti-corrosion treatment of all major surfaces must be carried out.

Not the last will be the issue of mobility and transportation of such equipment. The most suitable option would be a wood splitter, which has comfortable handles and wheels. Such devices are suitable for regular movements.If there are no handles and wheels, you need to choose a device with a smaller mass so that it is convenient to carry. In the devices of some manufacturers there are special casings, blocking with two levers, and various devices that increase the level of safety when working with the device.