Rating of the best LED strip dimmers for 2022

People install various lighting devices in the premises, such as lamps, tapes, which create comfort in the home and work environment. And modern technologies allow you to adjust the brightness of the lighting, and this is done using a special device, a dimmer. Similar devices apply to both lamps and light strips. Below in the article we will consider what dimmers for light dents are (SDL) and what they are.

What is a dimmer and why is it needed

A dimmer is a so-called dimmer that allows you to increase or decrease the power of the luminous flux. You should be aware that the regulators can be for an LED lamp and tape, and differ from each other, so using one device for two types of lighting devices will not work. Dimmers should be matched directly to the type of LED panel purchased, there is no one that fits all. If you use an inappropriate device, then the device itself is likely to quickly fail, this will be caused by the fact that the LED canvases operate in different modes and current values.

Dimmers for LED boards are used, as a rule, in cases where they are sources of primary or additional lighting, and most often when using several diode canvases. With the help of tape lighting and a dimmer switch, it is possible to:

• highlight certain elements of the architecture;
• create a cozy, relaxing environment for relaxation, as bright light is often an irritant and is suitable for active pastime;
• can be used in children's rooms, especially useful if the child is afraid to fall asleep in the dark, by creating a subdued light with a dimmer, the child will feel comfortable and fall asleep without fear;
• they also highlight the stairs so that there are steps, a dimmer is also useful here to dim the backlight, so too bright light can blind the walker, and he, in turn, get injured.

In the same way, floor lighting is adjusted, which is often installed in corridors and other rooms.

Classification of dimmers

Manufacturers offer consumers a fairly large selection of devices for controlling the brightness of SDLs and lamps. Dimmers for LED boards are different and are classified according to several criteria:

• if possible, convert the signal, there are analog ones, that is, those in which a thyristor or similar microcircuits are responsible for the output voltage, and digital ones operating on a microcontroller;
• according to the control option, they are divided into push-buttons, these have mechanical or touch buttons, located on the dimmer itself, remote ones - have remote control and combined, these allow you to work with the device in both ways;
• according to the form and type of connection, the devices are divided into modular ones, they are made in blocks with stamps to which wiring is connected; overhead, built-in ones look like ordinary switches attached to the wall, they are also miniature - they are made in the form of a module with small wires and having no more than three buttons;
• by purpose, they are divided into single-channel, intended for monochrome canvases, and multi-channel, suitable for tapes such as RGB and RGBW;
• according to the availability of functions, the dimmer can be built not only with a standard brightness dimming, but also turning on and off the additional flashing function, color music, the ability to control several ribbons placed in different places and many others.

The design classification allows the buyer to choose the model that is most suitable for his requirements and wishes.

How to choose

If you are going to make lighting with the help of SDL, you should immediately purchase a dimmer, thanks to which you can adjust the brightness of the light. But in order not to make a mistake in the choice, it is worth paying attention to several criteria:

• Power, it should be 15-20% more than the light board. But if in the future it is planned to increase its length, then it is necessary that the power reserve of the regulator be 30 percent higher than that of the light board, and at the same time, do not forget that a margin is needed, which should be up to 50%, so premature wear of devices can be avoided .
• Voltage, for both parts it should be identical.
• The number of channels, which will depend on the type of SDL. For example, for monochrome, single-channel controls are used, for RGB or RGB + W, multi-channel controls are needed.
• Designs, it can be hidden or overhead, in this case it all depends on the wishes of the user.
• Control, in this case, everything also depends on the preferences of the person who installs this type of lighting. But it is worth knowing that devices with touch and remote control are more expensive.
• The presence of a function, but here you need to understand that the principle of the more, the better will not work, since you will have to pay extra for additional features.

When choosing a regulator for LED strips, you need to take into account all the points in order to eliminate the rapid failure of the structure and create convenient conditions for use.

Connection

When choosing a regulator for the LED canvas, you should remember that the one that works with the same voltage, that is, 12 or 24 V, is suitable. stable and functional. The scheme is developed in accordance with the type of canvas and its length. Connecting the device is a simple procedure and does not require any special devices for its implementation. Knowing the basics of electrics will allow you to independently perform all the actions, without the involvement of a specialist.

So, in order for the dimmer to work, it is enough to connect it between the power supply and the SDL itself. Of course, one should not forget that the observance of polarities and inputs and outputs must be observed. The connection is absolutely the same for both single-channel and multi-channel boards, only when the second one is connected, the owners will have the opportunity not only to control the overall brightness, but also each color individually.

Rating of the best dimmers for LED strips

There is a fairly large selection of dimmer models on the market, ranging from Russian manufacturers to Chinese ones. As for the price, its size is affected by the equipment and scope of use. Before buying a regulator, you should check the compatibility of it and the tape.

Often, buyers prefer inexpensive models, but not all of them have a long service life.

Analog Models

Devices related to analog provide a stable current to a working circuit. Using such devices it is possible to avoid a large loss of power while the lighting system is working. Regulators of this type have one significant drawback, the LEDs get very hot during operation, which leads to their rapid failure.

Dimmer analog

It belongs to the most budgetary models of this type, it is perfect for LED lighting strips and lamps that support the dimming function. The switch operates on a voltage of 12 or 24 V, but the maximum current should not exceed 8A.

• affordable price;
• does not require any effort during installation;
• made of quality material.

• there are no on/off indicators;
• maximum current 8A;
• difficult to adjust the exact brightness.

Arlight VT - S74 - 30 A (12-24 V)

This dimmer model is perfectly compatible with all monochrome LED strips. Great for controlling 12V or 24V luminaires. Easy to use, smooth switch knob and simple graphic markings. Thanks to a convenient switch, users can easily adjust the required brightness of the diodes. It can withstand high current loads (30A), in addition it is equipped with clamping contacts, and special light indicators are placed on the case, allowing you to determine in which working position it is located.

• the product is of high quality;
• very easy to mount on the surface;
• withstands high current loads;
• additionally equipped with indicator lights;
• has a compact size.

• the cost is high in comparison with switches of this type;
• suitable for only one zone;
• mounting can only be overhead.

Controller - led dimmer - dm30-1212-24 B 30 A

A high-quality design for manual lighting control, operates on a voltage of 12, 24V, can withstand a current load of 30A, and the maximum power is 360W. But it is only suitable for connecting to single-color LED boards.

• affordable price;
• quality assembly;
• high power;
• withstands a large load (30A);
• easy to manage.

• there are no indicator lights;
• suitable for LED strips.

Digital

Devices that regulate the brightness of LED strips, related to digital, are very comfortable when controlling the brightness of all LED strips. Digital regulators provide more stable current operation and reduce power loss to a minimum. Also, the use of such switches does not allow the LEDs to overheat, thus the period of their operation is significantly increased.

04-10 Mini - dimmer 12 V, 72 W, RF

A miniature radio-controlled device that is in demand among consumers, thanks to it it is possible to transfer the SMD tape (monochrome) to several operating modes, there can be up to 25 of them. The kit comes with a remote control that allows you to adjust the regulator from a distance. The device operates at a distance of about 50 meters, which is very convenient, and it also differs from the others in that it does not require direct aiming at the distributor itself to control the functions.Allows the user to independently set the required brightness, turn the power on and off.

• belongs to the budget category;
• has a small size;
• a good complete set the remote control is included in the set;
• the remote control works without direction to the unit itself and at a great distance.

• signal failures occur when receiving from the remote control;
• maximum power 4/8 W/m.

ARLIGHT SR-2839DIM WHITE

A single-zone device for adjusting the brightness of diode strips, to which a control panel with a sensor is attached, it also has a built-in controller with a power of 1-10A. Dimming comes from a circuit whose voltage can be 12 or 24V.

• adjustment is carried out remotely;
• easy to install;
• a sensor is installed on the remote control;
• excellent kit.

• high price;
• sizes.

Schneider Electric Blanca BLNSS040011

The dimmer of this model is produced by a French company engaged in the manufacture of lighting equipment. The device has a hidden type of installation and a mechanism equipped with a special lining. Equipped with a rotary and push button, has a glossy surface made of thermoplastic. Power can reach 400V, and voltage up to 220W. Can be used with motion sensors. Built-in memory function remembering the last level of illumination.

• functional;
• can be installed hidden;
• easy to install;
• high-quality material from which it is made;
• small dimensions;
• in connection with its qualities has an acceptable price.

• quickly dirty surface;
• it is difficult to set the minimum brightness level, first you need to set the average level and slowly lower it.

push-button

Designs for dimming the light with the help of buttons in their appearance resemble conventional switches. To adjust the brightness with such a device, you only need to press the key; a quick press turns the device on and off, and a long press adjusts the brightness itself.

Panel SR-EN9001-RF-UP White

The panel is designed to control and control LED strips, all actions are performed thanks to the radio channel. The batteries in this device are batteries, the installation is carried out by an overhead method, and the control itself takes place using a special remote control.

• small dimensions
• ease of installation and use.

• the price is quite high.

LN-MINI-DIM (12-24v, 1x6A)

A compact device equipped with buttons for control, which are located on the surface of the housing. It belongs to the overhead type, the voltage can reach 12, 24 V. LED strips are connected, as well as PWM modules.

• the size of the device is small;
• easy to mount;
• has a low cost;
• reliable construction.

• the model is not suitable for complex lighting systems;
• control of the device is not very convenient.

Knob SR-2853K4-RF-UP White

According to customer reviews, this model is of very high quality. The two-zone switch works by radio waves, with a short press, the lighting turns on or off, with a long press, the dimming mode is activated.In order for the regulator to work, controllers from the SR-1009x series are used, which are capable of simultaneously regulating the operation of several diode panels, and the battery (CR2430) acts as a power source. The model is suitable for controlling ribbons of the same color, as well as other lamps operating on LEDs.

• works without connecting wires (autonomously);
• easy to install;
• has additional control from a remote control or using a phone with Wi-Fi;
• the mode of inclusion, switching off is carried out smoothly;
• there is a command transmission indicator.

• the price is high;
• after the expiration of time, it is necessary to replace the batteries, or rather the batteries.

Remote Models

Regulation and control when connecting this type of device is carried out using a special remote control, which is included with the switch itself. The control over the tape is carried out using a radio signal or infrared radiation. But those models that support radio signal control are much more expensive, the remote control allows you to adjust the lighting even when the user is outside the room.

Ecola 48W/12V, 96W/24V IR

The model of this controller is infrared and allows the owners to independently choose the degree of brightness and choose the glow mode of monochrome boards, a remote control is attached for ease of control. The signal comes from infrared rays that come from the remote control to the receiver. The maximum load of this regulator model is 4F per channel, LED - the tape is connected to the light regulator through a plug connector specially designed for this.The device is suitable for both monochrome and one-color tapes.

• remote control;
• functionality;
• the price is very low;
• easy to mount.

• since the device operates from a remote control with infrared radiation, its range is small.

APEYRON 300/600 W 12/24V IP20 with remote control

This model is suitable for single-color boards, the regulation is carried out using radio frequencies emitted from the remote control. Among a number of functions, one can single out such as turning on, turning off, adjusting the brightness, night mode and the turn-on delay mode are supported.

• availability of various functions;
• the quality of the design itself;
• light weight.

• suitable only for ribbons that have one color;
• high price.

Arlight LN-RF6B-Sens Black (12-24V, 3x8A) 023375

An excellent controller model with a radio remote control with 6 buttons and a touch ring for control. The switch is perfect for multi-color RGB LED strips and allows you to create many different light shades. The dimmer has 10 different programs that can be set with successive color changes. One of the advantages of the device is that its body is made of metal that improves heat exchange and prevents the mechanism from overheating, and also acts as a good protection of internal parts from damage. Using the remote control, you can adjust the speed of changing shades.

• metal case
• all actions are carried out using a remote control with a touch ring
• functionality.

• price.

LN-RF8B (5-24V, 80-384W, remote sensor 2.4G)

One of the popular dimmer models among consumers has high power ratings (16A). Copes with all lighting systems, equipped with additional reinforced stamps, the kit also includes a touch control panel. The design is mounted overhead. It is possible to control four zones at once.

• remote control touch;
• high power ratings;
• allows you to control four zones at once.

• the sizes are quite large;
• price.

Touch

Devices of this kind have a special touch panel that allows you to adjust the brightness of the light with a light touch on it. Such models, as a rule, have a modern design, but in terms of functionality, they are no different from other types.

Switch - touch dimmer 12/24V 48W

The budget controller of small size, designed to control LED strips, is easy to use and has a simple touch panel. Operates at a constant voltage of 12 or 24 V and is one of the best budget representatives of this type of dimmers. Often used for decorative lighting in aluminum profiles. The maximum current during operation should not exceed 4A. sensitive sensor allows you to easily set the desired brightness. Suitable for LED lights.

• the price is affordable for everyone;
• quality assembly.

• a small maximum current strength, it is only 4A.

Uniel ULC-R22-DIM

A good model of the touch controller, on the remote control there is a touch ring for all the necessary manipulations.The dimmer has a built-in memory function that saves all settings in the event of a sudden shutdown of the device. In order for the device to work without interruption, special protection against radio frequency interference is built into its board. High-quality parts increase the service life up to 50,000 hours. Uniel ULC-R22-DIM has a combined voltage supply, that is, it can be both 12 and 24 V.

• there is a memory function;
• quality parts;
• long service life;
• affordable price.

• not detected.

Dimmer LN - 200 (12-24V, 72-144W, Touch)

A compact dimmer that allows you to control the lighting with just one touch. A quick touch of the knob allows you to turn the light on or off, a long press turns on the dimming function. The highest voltage indicators during operation are 12-24 V, and the power reaches 77-144 watts. A lightweight device that is placed on the wall will create comfort when controlling light in any home.

• compact dimensions;
• touch control;
• has an overhead mounting method.

• the price is too high for such a simple device;
• limited range of functions.

Ecola LED Strip Dimmer Panel 12A 144W 12V (288W 24V)

The model is produced in the form of a touch panel that allows you to control the brightness of the light in the room. Suitable for adjusting multi-colored and single-color boards, the case is attached both externally (overhead) and by cutting into the wall. The kit includes an installation box that allows you to deepen the device into the wall when installing it. The user gets the opportunity to control the brightness of the light in ten modes.

• stylish look;
• mounting can be carried out in a mortise or overhead way;
• staffing;
• affordable price;
• The regulator is equipped with 10 operating modes.

• under heavy load and power surges, failure is possible;
• weak plastic case, can not withstand mechanical stress.

Dimmer for LED strips, a device through which people can control and adjust the brightness of the lighting in the room. But before purchasing it, you should check the compatibility of the device and the light sheet and take into account all its functions. Installation, as a rule, does not cause any difficulties and does not require additional equipment.