Ranking the best heated seat covers for 2022

Ranking the best heated seat covers for 2022

To date, not every modern car is equipped with a seat heating system. This circumstance causes depressing feelings, especially when the car is used in regions with a very cold climate - from Alaska and Scandinavia to Siberia. Thus, a warm seat becomes far from a luxury, but a necessity due to the temperature regime. To overcome this inconvenience, the easiest way is to purchase a heating cover / seat cover. A well-chosen device for such heating can provide a high level of driving comfort.

The principle of operation and the general arrangement of heating covers

The considered type of accessories for driver and passenger seats is an electrical device that is necessary to create comfort for the driver / passenger inside the car when operating it at low temperatures. Today on the market you can find quite a lot of different options for covers, which may differ in color, external design and technical parameters. Although these devices have some differences, they work according to a single principle, and their design consists of the following elements:

  • Fabric base - it is made of extra strong heat-resistant fiber materials;
  • Heating elements - they can have a different design, but the main thing for them is to be correctly distributed over the entire area of ​​\u200b\u200bthe fabric base, and the principle of uniformity will play a crucial role here;
  • Regulator and sensor - a special sensor is also sewn into the fabric base, which is responsible for reading temperature indicators, and using the regulator, you can set the desired temperature level.

It can be seen from this that the design of heated covers does not shine with complexity. As for the heating elements, they can be made from:

  • carbon fiber;
  • Insulated nichrome wires;
  • Teflon coated wires.

Modern types of heated cases

It should immediately be noted that accessories of this type have only two structurally different variations:

  • For the front seat - the most common product, it can be purchased separately (i.e. either for the driver's seat or for the passenger seat), or as a pair - for both front seats. They differ in a separate structure, have separate heating bases and can be used independently of each other.
  • For the rear seats - most often these covers have an increased area, which is due to the design feature of the rear seat in most cars, which, in fact, is a small sofa. These capes come in handy when the vehicle is often used to carry passengers. The only caveat is that they must be connected to the on-board network as correctly as possible, and the output of the regulator must be determined in advance - whether the temperature control will remain with the driver or will be left to the discretion of the passenger.

Monolithic covers

By installing this type of covers, it is possible to minimize the length of unnecessary wiring when connected to the on-board electrical network. The installed non-removable cover is rather a matter of individual preference, through which the issue of an excessive pile of materials on the seat is still solved.Professionals advise using monolithic built-in covers exclusively for the rear seats, because they are immediately sewn over the seat upholstery, therefore, when several people are in the back seats, they will not slide off and move out, always remaining in a stable position, which will not force the driver to adjust the covers after each trips. The control system of monolithic models is traditionally displayed on the dashboard, which is most convenient for both the driver and passengers. Accordingly, the main advantage of such models is their stability, a completely hidden heating mechanism and increased practicality.

Advantages and disadvantages of using heating covers

It is quite possible to attribute to their positive qualities:

  • Comfort - sitting on a warm seat is much more pleasant than landing in a frozen chair. This is especially true for leather seats, which simply freeze through in severe frost.
  • Maintaining the level of health - often riding in a cold seat ends with unpleasant diseases and the need for their treatment. The question is especially critical when a heated body, even through clothing, begins to abruptly take local pronounced doses of cold. Moreover, this situation will be harmful not only to women (which is widely believed), but also to men. A separate conversation about people suffering from diseases of the musculoskeletal system, especially if they undergo medical procedures on an ongoing basis (for example, local heating or physiotherapy) - they are definitely contraindicated in the effects of cold in the pelvic area.
  • Heating the car cabin - it is natural that when the seat heating is turned on, some of the heat will be given off to the surrounding space.Thus, the heating of the air in the cabin will be faster.

The negative qualities include the following:

  • With the constant use of fully heated covers, there is a risk of their negative impact on men's health, up to diseases of the genital organs and the appearance of problems with reproductive function;
  • A sharp temperature drop can cause colds, as well as inflammation of the urinary tract, both in women and men;
  • A negative impact can also be exerted on children's health, because the child's body in terms of thermoregulation is not sufficiently developed, and the genitals are only at the stage of formation;
  • Excessive heating of the seats can make the driver drowsy, which can provoke a traffic accident (practice shows that such causes of accidents are not uncommon);
  • Excessive dehumidification of the air in the cab - like any heating devices, heated covers quickly dry out the air in the surrounding area. If a person inhales air that is too dry, it can lead to headaches, the breathing process can be difficult, and the mucous membrane of the respiratory tract can become irritated.

Difficulties of choice

In the process of acquiring heated covers, it seemed to be enough devices that were simple in design, you should pay attention to the following technical and product parameters:

  • The overall quality of the goods is the accuracy of the cut of the fabric base, the reliability of the supply wires and connectors.
  • The heating rate is an important indicator that directly affects the sufficient level of comfort. The ideal time for complete warm-up should be no more than two to three minutes.
  • Reliability - this parameter is determined by the reputation indicators of the manufacturer (professionals and experienced motorists prefer reliable and proven brands).
  • Features of the integration of the cover - the model must be selected in such a way that after its installation it fully functions. However, a lot here will depend on the personal preferences of the owner: for someone, the speed of installation and power connection is important, and another driver wants to thoroughly approach the placement of the cover, even if the process is fraught with some difficulties.
  • External design - here it is important to carefully check the shape and thickness of the cover, its ergonomics and compliance with the overall design of the cabin where it is installed.
  • An additional option is, first of all, the presence of massage mechanisms. Heating covers with this option are, of course, more expensive, but the massage effect will have a positive effect on the body of those drivers who drive for a long time during the day.
  • Heating technology used - this parameter should include the use of innovative materials (for example, fiber optic filaments or filaments based on polymer fibers) that will guarantee complete operational safety, coupled with reliability and durability.
  • Method of connecting heating filaments - a parallel method should be used, in which the breakage of one filament will not affect the overall effective operation of the device.
  • Heating quality - it must be ensured by proper installation and connection of the regulator-relay.
  • The quality of the fabric base - it is desirable that the fabric used in the model has an anti-slip effect.

Installation and connection of heated covers

If a monolithic built-in cover during installation requires the participation of a professional, then a simple cape is easy to put on, and this process will be intuitive to any motorist. Yet, with even a little knowledge in terms of installing heated covers, it is possible to perform even the most difficult integration.

IMPORTANT! It is worth noting that although a professional installation will require financial costs from the owner, its plus is that the warranty obligations of the master will apply to the work performed.

For self-installation of a monolithic built-in model, you will need to remove the car seat. To do this, it is necessary to move it as far back as possible, then unscrewing the front fasteners. Next, the reverse procedure is done - the chair is moved as far forward as possible and the rear fasteners are unscrewed. Now the chair can be easily removed from the cabin to a more free working area. The next step is to remove the upholstery and install a heated canvas or simply pull the cover as a whole. At the same time, one should not forget that the connecting wire must be led out under the bottom of the seat. After that, the chair is installed back into the cabin and fixed both front and rear. Next, you need to connect all the wires to the on-board electrical system and check the operation of the device as a whole by turning it on for 15-20 minutes until the seat is completely heated.

Ranking the best heated seat covers for 2022

Optional heating covers

2nd place: "JMANEYES Carbon fiber heating pad"

Heated covers and cushions are not always suitable for car seats, and their temperature is not always enough. For such cases, it is possible to find a set of two mats on the market.They must be installed under the cover on the back or seat, then connect the wires to the battery. A rotary switch is used to adjust the temperature, there are 5 modes. The kit is complete, there are all the necessary wires, ties, a fuse and adhesive tape. The length of the main cable is 2.5 m, thanks to which it will be possible to place floor mats on the front or rear seat. Of course, such a kit cannot be considered universal, because not all beginners will cope with the installation of a heating system. The recommended cost for retail chains is 2500 rubles.

JMANEYES Carbon fiber heating pad
Advantages:
  • Long wire;
  • Universal sizes;
  • Heating works even when the cells are broken;
  • Strong and durable materials;
  • Five heating modes.
Flaws:
  • Difficult installation for beginners;
  • Cannot be connected to a 24V battery.

1st place: "KLASVSA Back Massager Chair"

This is the original heated car massage chair. After switching on, the device starts to vibrate and heat up. It takes only half a minute to reach the minimum heating temperature. Ultra-frequency vibration stimulates blood circulation, relieves fatigue and pain. Motors are located in 9 compartments responsible for massage of different parts of the body. By the way, you can use the product at home, the kit includes a cord for an outlet with an adapter. The main drawback noted in the reviews is that without a cape, the chair turns out to be too hard, it will be uncomfortable to sit on it. The recommended cost for retail chains is 3300 rubles.

KLASVSA Back Massager Chair
Advantages:
  • 4 versions with different controllers;
  • Adapter for socket in the set;
  • Tangible massage effect;
  • Heats up quickly;
  • 9 modes of vibration and heating.
Flaws:
  • Harsh material without a cape;
  • Noise during work.

Rear seat covers

4th place: "Audew Car Seat Heated Cushion"

A feature of this product is the presence of a variety of configuration options. You can order a large cover for the rear seat, a mini cushion or a complete set for the car. Inside each product there is a layer of sponge material, so it will be comfortable to sit. The fabric is flame retardant, easy to wash and excellent heat transfer. The kit includes hooks for attaching to car seats. Temperature control is not provided, there is only one mode. Judging by the reviews, the heating is noticeable, although this may not be enough for severe frosts. The device heats up within half an hour. The most significant minus of the cape is the small length of the wire, it does not exceed 35 cm. The recommended cost for retail chains is 2800 rubles.

Audew Car Seat Heated Cushion
Advantages:
  • Soft filler inside the fabric;
  • Fire protection;
  • Easy material care;
  • Various configuration options;
  • Convenient mounting on car seats.
Flaws:
  • You can not change the heating temperature;
  • Warms up for at least 30 minutes;
  • Not enough wire length.

3rd place: "Daikin Ants JGYU"

A good budget product for heating car seats. This miniature pillow is characterized by sufficient power and temperature. There are two modes to choose from, the controller is directly on the wire. The cable length is 120 cm, this is not the best option on the market, but for small cars it should be enough.Most buyers praise the workmanship, pleasant to the touch material and fairly quick heating of the pillow to the optimum temperature. The recommended cost for retail chains is 800 rubles.

Daikin Ants JGYU
Advantages:
  • Excellent workmanship;
  • Durable material that repels water and dirt;
  • Average wire length;
  • Fast heating to a comfortable temperature;
  • Two modes of operation.
Flaws:
  • Not detected.

2nd place: "Onever Heating Seat Cushion"

An excellent cape for the back seat of a car for the cold Russian winter. It is made of smooth material and provides not only comfort while traveling, but also protection from dirt. According to the manufacturer, heating is possible even up to 70 ° C. True, not all models are equipped with hooks for fastening. To activate the heating element, the cover must be connected to the cigarette lighter, so when ordering, please note that the length of the cable is 1.2 m. There is a choice of colors. The recommended cost for retail chains is 1400 rubles.

Ever Heating Seat Cushion
Advantages:
  • Several colors to choose from;
  • Strong heating;
  • Adequate cost.
Flaws:
  • Not detected.

1st place: "ZvezdaAuto Compact"

Universal heating pad that fits both front and rear seats. It fastens with an elastic band. The manufacturer did not indicate the temperature range, but buyers speak of good heating qualities. The working element inside is improved, it is reliable and can withstand even constant heavy loads. In addition, the seller provides a one-year warranty. In terms of heating power, the cape is one of the best on the market today.In addition, the model is safe, as the power cord is attached securely. It is connected to the cigarette lighter, and the cable length is 1.45 meters, so it is convenient to use the pad on the rear seats of the car. The recommended cost for retail chains is 900 rubles.

ZvezdaAuto Compact
Advantages:
  • Versatility;
  • High power;
  • Long cable.
Flaws:
  • Heating temperature not specified.

Covers for front seats

3rd place: "Audew Heater"

These cape cases are available in 4 colors and two versions, differing by the type of switch. There are two temperature modes, there is also protection against overheating. The device automatically turns off when it reaches 70°C. The 126 cm long wire is enough to place the capes on the front or back seat. The material is soft and pleasant to the touch, sit comfortably. The covers warm up in 3 minutes, the temperature is good, there is no smell during operation. The recommended cost for retail chains is 1800 rubles.

Audi Heater
Advantages:
  • Strong and thick wires;
  • Too high temperature protection;
  • Bright colors and nice material;
  • Fast heating.
Flaws:
  • The straps are too short.

2nd Place: Daikin Ants Seat Covers

These covers are sold individually, so you can buy a cover for only one car seat. The heating coils are located over the entire surface of the product to provide fast and even heating. The material is quite dense, with embossed patterns for the comfort of the back and lower back. To turn on the heating, you just need to connect the cover to the cigarette lighter and move the regulator, it's easy and convenient. Buyers liked the workmanship and hard wire of the device.The recommended cost for retail chains is 1900 rubles.

Daikin Ants Seat Covers
Advantages:
  • Good workmanship;
  • Convenient management;
  • Warms up in just 30 seconds
  • Can be ordered by the piece;
  • Embossed patterns on the fabric.
Flaws:
  • Too bright lights on the remote control;
  • Short wire.

1st place: "Tisity Heating Car Seat Cushion"

These covers look so harmonious on the seats that they will not need to be covered with a cape. The manufacturer offers three design options in the most popular colors for cars: black, white and brown. On the reverse side there are non-slip pads that fit snugly to the chair. This device uses smart heating technology: heat circulates throughout the surface of the cover, providing maximum comfort to passengers. There are two modes of operation with different temperatures, one toggle switch is used to switch. One of the few drawbacks of the product was the length of the wire - only 115 cm. Because of this, the cover can only be placed in front, the cord will not reach the back seat. The recommended cost for retail chains is 2000 rubles.

Tisity Heating Car Seat Cushion
Advantages:
  • Solid appearance;
  • Non-slip coating on the inner surface;
  • Heating to the desired temperature in 2 minutes;
  • Economical battery power consumption;
  • "Smart" heating technology;
Flaws:
  • Small cord length;
  • Unpleasant leatherette texture.

Conclusion

It would seem, what can be the claim to an accessory that allows you to get into the car with royal dignity in winter, and not with a pained grimace and strong words rushing out? However, disputes around heated covers are still ongoing: someone assures others of the presence of harmful radiation from the heating element, and someone has no doubt that excess heat can adversely affect reproductive health - especially for men. It should be said right away: these hypotheses are not confirmed by absolutely nothing. The harmfulness of carbon fiber radiation is nothing more than a myth, and ten minutes in a cold car seat is much more dangerous for health than the same time, but in a warm seat. The only problem is the tendency of car owners to heat the seat to the maximum, and then run out of the car into the cold. To avoid hypothermia with a cold, experts recommend turning on covers for no more than 15 minutes, and not putting the device on the highest temperature. Otherwise, heated covers do not promise any trouble, except for getting used to the good - so you can safely use it!

0%
0%
votes 0

Tools

Gadgets

Sport