Rating of the best car lifts for car service for 2022

The lift supports the repaired car in order to facilitate the work of the mechanic. It also allows you to save free space in a car service or garage. Can raise the machine to any required height to make it convenient to work with units located at the bottom or under the bottom of the vehicle.

Description

Installation for a car is a simple design, which includes:

• support system;
• drive mechanism.

It is used to raise the machine to the desired height and hold it in this position for a sufficiently long time. This allows you to carry out work on its repair and inspection. Platform options are equipped with additional functionality that makes it possible to use it as a stand base to adjust the wheel alignment angles.

Main types

What are vehicle lifts? If we review the proposed popular models, then all of them can be divided into two groups, depending on the drives used in the manufacture:

View	Description
Electro-hydraulic	The power transmission occurs through the use of a hydraulic cylinder with a pump.
Electromechanical	A screw transmission is used, in which mechanical energy is transformed into axial movement. Energy is generated by an electric motor.

Lifts can also be:

• stationary or mobile;
• have different lifting heights;
• have different functionality;
• be inexpensive and at a high price;
• have different carrying capacity;
• with various structural elements;
• with a function for lifting trucks and cars.

Taking into account the design features, the devices are divided into four main groups:

1. Single rack. It has the following elements: vertical stand, horizontal support, horizontal frame.The advantages include compactness. They can be stationary and mobile. The carrying capacity is negligible - up to 2.5 tons. Designed for the repair of passenger cars and some models of SUVs.
2. Two-column. Stationary device designed for lifting machines up to 5 tons. The main disadvantage is that it can only be installed on a certain surface, which must be durable, made of high quality concrete. Universal models are available for service stations and allow you to lift a car to a height of up to two meters. They are quite popular due to their versatility.
3. Four-post. Consists of 4 racks and 2 platforms. Used to repair minibuses and trucks with a small tonnage. The positive qualities include convenience, speed of recovery and reliability.
4. Scissor. Used in conjunction with other equipment to perform a variety of tasks to bring the machine into proper condition. The average price is too high, but they are worth it. The positive aspects include the possibility of mounting the structure on any horizontal surface, including not ideal, and the maximum smoothness of lifting.
5. Plunger. The most modern car lift. Differs in simplicity in service and finding of power mechanisms below floor level. It belongs to the category of the best devices that allow you to work from all sides. The positive qualities include saving free space and a long service life.

Specifications

Currently, the owners of car services are trying to purchase electromechanical-type lifts for service stations, which, with the same carrying capacity, are somewhat cheaper than their counterparts.But in practice, it turns out that repairing such a device in the event of a breakdown costs a lot of money. This is due to the need to dismantle all lift racks in order to carry out repairs, such as:

• replace working nuts, carriage sliders or rollers;
• adjust chain synchronization;
• replace the screw on the carriage.

Sometimes the cost of restoring the device to working capacity reaches 50% of its original price. Therefore, before choosing a particular product, you should look at popular models, decide on the best manufacturers, view the rating of high-quality equipment, familiarize yourself with the functions, and pay attention to reviews. You should not make mistakes when choosing, as this can hurt the image and pocket of the owner of the service station.

If you follow the recommendations of experts, it is best to give preference to such a type of product as electro-hydraulic. Products are available in the following versions: plunger, scissor, two-column, four-column. They have the following positive qualities:

• racks are not subjected to mechanical beating;
• you can lower the car to the floor even if there is no power in the network;
• the speed of lifting and lowering is significant;
• budget models are produced;
• high quality material;
• manufacturer's warranty;
• post-warranty service is provided;
• the cost of annual warranty service does not exceed 5% of the original cost of the goods;
• reliability;
• long service life.

How to choose

What should you pay attention to when choosing a product? What matters is how much it costs. However, this is not the only, and by no means the main selection criterion. Any product has technical characteristics, both essential and not so.Decisive when choosing should be considered:

• power supply indicators of both the pumping station and the drive;
• maximum load capacity of the installation;
• refers to a mobile or stationary type;
• whether the package includes additional equipment that significantly expands the existing functionality;
• dimensions in working and non-working condition.

It should be borne in mind that for a car service with small rooms it is better to buy a scissor lift, the installation of which is carried out in the recesses of the floor, which significantly reduces the free space occupied in the box.

According to buyers, the insignificant qualities include:

• additional complete set of equipment with locksmith tools;
• what color are the lamps and lift racks;
• What does the shipping package look like?
• whether the product tops the ranking of the best models of the current year;
• how hyped the product brand is.

All these indicators can significantly affect the price of the product, but not improve its functionality and consumer properties.

Which company to buy products and where to buy it? There are no definite answers to these questions. It all depends on the preferences of the potential buyer and his financial condition. There are several options to become the owner of this type of product:

• visit a specialized store and choose the model of interest;
• order online in the online store, saving some money;
• make a lift with your own hands.

Let's take a closer look at the last option. The design is not particularly difficult, so if you have small skills, the necessary equipment and tools, free time and desire, you can make it yourself. As an example, let's take a screw car lift and consider step-by-step instructions for making it yourself.

First, let's define the main characteristics of such devices. Their carrying capacity varies from 1.5 to 14 tons. The unit is equipped with one, two, four or six racks. Let's stop on the two-column version. Its main structural elements are as follows:

• racks - 2 pieces;
• cross member;
• screws;
• nuts;
• electric motor;
• pickups;
• bearings;
• anchors;
• chain transmission.

Required materials for manufacturing:

• hydraulic rods;
• compressor;
• hydraulic cylinders - 2 pieces.

As for the electric motor with a gearbox and the shaft, such parts can be purchased at an exchange point, where used elements are handed over, and new ones are obtained with a surcharge. Decide on the load diagram and complete the drawing. It must be accurate and verified. Make the design in full accordance with the drawing. Make sure it is safe and secure. Provide it with a lead screw to move the corner with hooks. Mount the motor and gearbox. How to install the unit? Fix the finished equipment with anchor bolts to the floor. Before starting operation, make sure of its strength and reliability. If you have any difficulties, seek advice from the craftsmen who have already made such products.

Rating of the best car lifts for car service for 2022

Single rack

A good choice for small car services. Its main advantage is that it is very compact and does not take up much free space in a small box, where only a couple of cars can be repaired at the same time. Its main purpose is to create an opportunity to conveniently approach the car in order to quickly eliminate breakdowns. Auto-mechanic must have access to all nodes and mechanisms.

PP-1-01, mobile, capacity 1t

It is used for its intended purpose in individual garages, small service stations, tire shops, boxes for the repair of cars and minibuses with a maximum load capacity of 2 tons. It belongs to the mobile type. Raises the car on one side by the wheels or thresholds. Main structural elements:

• rack;
• electromechanical drive;
• the carriage is movable;
• cargo screw;
• nuts;
• switch;
• electronic control unit;
• portable control panel.

The package also includes a safety stand and special pickups. The unit with dimensions of 1060 x 720 x 1260 mm and weighing 130 kg is moved manually, operates at a voltage of 360 V. The time for lifting the car to the maximum height is 30 seconds.

The product can be purchased at an affordable price - 94400 rubles.

• convenient;
• small dimensions;
• light weight;
• reliable;
• long operational period.

• not installed.

Monolift 1200 (Werther-OMA 478 C)

The electromechanical monocolumn with a maximum load capacity of 1200 kg has platform dimensions of 2190 x 300 x 60 mm and weighs 480 kg. Can be used to lift cars and motorcycles. Equipped with a 2.6 kW electric motor. The car lifts to a maximum height of 1.8 m in 55 seconds. Often purchased for medium car services.

The average price is 319,000 rubles.

• platforms can be adjusted in width;
• an electromechanical device will protect the unit from falling;
• equipped with a safety nut;
• there is automatic lubrication;
• provided with anti-corrosion protection.

• significant have not been identified.

PM-750, mobile, capacity 750 kg

Thanks to it, it is possible to tilt or lift passenger cars with a maximum weight of up to 1.5 tons for the purpose of their repair and maintenance. It rises both behind the wheel and over the threshold. For this, a rubberized metal lining is provided. Scope of application - car services, body shops, car dealerships, individual boxes, where a small area is allocated for the repair area. For a maximum lift height of 90 cm, it will take 50 seconds. The unit weighs 71 kg, has dimensions of 774 x 716 x 1235 mm. Available with both manual and mechanical drive. Operates at temperatures from - 35 to + 45 degrees.

The average price is 67,500 rubles.

• compact;
• reliable;
• durable;
• convenient to use;
• Excellent value for money and quality.

• significant not found.

Nassbaum 1.20S

It is very suitable for those who cannot allocate a lot of free space for car repairs. The German manufacturer guaranteed the reliability and safety of his offspring. The carrying capacity of the device is 2 tons, the engine has a power of 2.2 kW, and the sufficient voltage in the network is 380 V.

The average cost is 640,000 rubles.

• there are no essential requirements for the foundation;
• the ability to access the car from one side;
• controlled by a remote control mounted in a rack;
• carrier nut material - nylatron, which is of high quality and durability;
• works almost silently.

• will not work if there is a power problem.

MM25 (OMA 496), capacity 2.5 t

The electro-hydraulic mobile lift from the Italian manufacturer is distinguished by excellent quality, reliability and durability.It is purchased for locksmith and body shops, boxes for tire service. Can be installed both outdoors and indoors. The capture of the car occurs both for the body and mechanical elements. There is a safety nut, anti-corrosion protection.

The product can be purchased at a price of 513,000 rubles.

• convenient to use;
• takes up little free space;
• made of high quality material;
• there is a protective device against falling;
• long service life.

• significant not found.

two-column

Refers to expensive and reliable garage equipment. Differs in durability and simplicity in service. Easy to install and can be used to lift almost any vehicle. They are electro-hydraulic and electromechanical. It differs from the previous type in greater reliability and stability, as well as in cost, which is much higher. Columns can be arranged both symmetrically and asymmetrically. Possesses various loading capacity.

SCT6140 Down Timing

The electro-hydraulic type model has a maximum lifting capacity of 4 tons and can lift the machine to a height of 1.8 m in 40 to 50 seconds. It is widely used in service stations, where they carry out repair and maintenance of SUVs, pickups, minivans and cars. The device has a mechanical locking system that minimizes the possibility of accidental fall of the machine. Equipped with a 2.2 kW motor, operates at a mains voltage of 380 V.

Price - 59,000 rubles.

• equipped with telescopic lifting paws;
• asymmetric design provides an opportunity to easily reach the front doors;
• the presence of the “locking ruler-latch” system securely fixes the machine;
• the automatic stopper does not allow lifting paws to rotate;
• you can lower the device without the help of hydraulics;
• there is no need for a high-quality foundation;
• paint and varnish powder coating was used;
• can be additionally equipped with adapters for small trucks.

• missing.

Nordberg 4122A-4T

Mandatory equipment for both medium and large car services. Each column is equipped with automatic mechanical protection, lower cable synchronization is provided. The unit weighs 600 kg, lifts the car to a height of 1.8 m in 55 seconds. The maximum load capacity is 4 tons. Works from a network in 380 V.

Price - 69900 rubles.

• you can lower the car in case of power outages;
• the car smoothly rises and falls thanks to two hydraulic cylinders;
• control of the unit is easy and simple;
• equipped with anchors for fastening to a horizontal surface and four adapters for frame machines.

• significant ones are missing.

Erco 3222 CEL

The mechanical device with a lifting capacity of 3.2 tons has two electronic synchronization motors. The smooth running helps to avoid falling of a car. The stop at the extreme lower and upper positions is carried out automatically. There is a special motor overload protection. The car rises to a maximum height of 1985 cm in 55 seconds. The weight of the unit is 600 kg.The package includes a built-in control panel, non-adjustable stops with rubber cushions in the amount of 4 pieces, two protectors that protect the integrity of the car when installed on the device.

The product can be purchased for 344167 rubles.

• asymmetric telescopic lifting paws help the master to get to the driver's door;
• when the button is released, the engine is instantly turned off;
• 8 positions of lifting paws;
• pickup height is insignificant;
• convenient in operation;
• reliable;
• long operational period.

• significant have not been established.

Power LIFT SP3000 3650 mm

The manufacturer has created an asymmetric unit for maintenance and repair of various passenger cars. It has no base, but there is a hydraulic device. Two independent traction hydraulic cylinders are synchronized using two cables. Electromagnetic latches fix the stop at the required height. Lowering and lifting is carried out quickly, without the use of a hydraulic drive. There are no essential requirements for the foundation. In 30 seconds, the car rises 1.82 m.

The cost is 485550 rubles.

• there is no need to make a solid foundation;
• easy to use;
• reliable;
• convenient;
• descends and rises quickly enough;
• Equipped with base reinforcement and adjustable adapter.

• significant ones are missing.

Erco 4000 HNS

It is widely used in medium and small service stations, where there are small boxes and not much free space, and there are plenty of people who want to fix their iron horse.Corghi has released a unit weighing 770 kg, with a carrying capacity of 4 tons, powered by a network of 380 V. The car is raised to a height of 1.9 m in 50 seconds. There are independent hydraulic cylinders in the amount of two pieces, lifting paws of an asymmetric type, automatic locks that prevent the paws from turning unauthorized.

Price - 427,000 rubles.

• the paws are equipped with protective gratings so that the operator does not injure his legs;
• there are overload valves;
• lifting arms can be blocked mechanically;
• there is a sensory tension of the cables.

• not identified.

Four post

Its main purpose is to carry out maintenance of a car or truck, its repair, anti-corrosion finishing, painting, and so on. It is also used when checking wheel alignment. It consists of two pairs of support posts interconnected by longitudinal-type platforms, which function due to the presence of hydraulic hoses, electrical cables, steel cables. The design is considered the safest for lifting and lowering a car. Every year, manufacturers release the latest new products.

AE&T F4.5D-4, capacity 4.5 t

The electro-hydraulic device is designed for quick and convenient lifting and lowering of the machine for the purpose of its maintenance and repair. Can also repair small trucks. The best option for the post "collapse - convergence." Powerful and fast electro-hydraulic drive reduces repair time. Management is carried out using the remote control. Equipped with specially designed entry ladders. At 1.7 m raises the car in 50 seconds. Operates on 380 V power supply.

The average cost is 284807 rubles.

• reliability due to a multi-level security system;
• durability;
• modern automation;
• equipped with rear sliding plates;
• electro-hydraulic traverses are present;
• good value for money.

• significant have not been identified.

PGA-6000/4 Civic, capacity 6 t

The Russian manufacturer produces a high-quality and reliable design with a load capacity of 3 tons, equipped with sliding plates and double niches for turntables. Used to adjust the camber on the 3D stand. Latch with pneumatic mechanism allows you to automatically block the carriage. Auto in 60 sec. lifts to a height of 1.8 m. Dimensions: 7750 x 3617 x 2160 mm.

The average cost is 454,000 rubles.

• convenient design;
• is not difficult to operate;
• reliable, made of high quality materials;
• the level of security is high;
• excellent value for money.

• not identified.

Trommelberg TST 470C

A feature of this model are smooth platforms and a pneumohydraulic axial jack, due to which the machine is suspended. It is controlled by a push-button panel, lowered without the use of a hydraulic unit. The top quality metal is powder coated. Load capacity 7t, engine power 2.2 kW, powered by 380 V, lifting height (max.) 1.7 m.

Price - 518077 rubles.

• in the manufacture of high quality material is used;
• anti-corrosion coating;
• convenient in operation;
• long service life;
• post-warranty service.

• missing.

T4-34 Armada, load capacity 4 t

A design with dimensions of 4360 x 3200 x 2000 mm is often found in small and medium-sized service stations. Designed for collapse - convergence. There are movable plates and places for turntables. It is completed with a two-ton traverse with the drive. Load capacity - 4 tons, weight - 945 kg, engine power - 2.2 kW, mains voltage should be 380 V.

Price - 225933 rubles.

• well exploited;
• possesses worthy reliability and safety;
• Excellent value for money and quality;
• made of quality material.

• significant not found.

screw

Their main feature is the presence of a mandatory solid base and nuts - screws, which are driven by an electric motor. The mating structural element is rigidly coupled to the carriage and can only move up and down, raising and lowering the machine. Installed permanently, can be produced with one or two engines, mechanical or electronic system. The load capacity is from 3.2 to 5 tons, the maximum lifting height is 1.9 m, the weight of the device ranges from 700 to 1040 kg.

DARZ P1-01MN "Antey", capacity 5t

The electromechanical unit is produced for the repair and maintenance of machines whose weight does not exceed 5 tons. It is installed flush with the base, which makes it possible to deal with various cars, from Oka to prestigious foreign models, minibuses and SUVs. Frame cars require additional installation of screw supports.

Price - 181840 rubles.

• high reliability;
• long service life;
• excellent anti-corrosion properties;
• resistant to organic solvents;
• good decoration;
• cargo screw and carrier nut are durable;
• in the manufacture of the rack, a special stamped high-quality profile was used;
• the position of the pickups are blocked automatically;
• good carriage synchronization.

• without fail, you need a high-quality and solid foundation.

P-97MK "Leader", load capacity 3.2 t

It is used to service machines of different classes. It features an extended coverage area and a small receiving height of the carriages. The paint applied to structural elements is strong enough and is not afraid of mechanical stress, does not corrode, and is considered decorative. Mounted independently, with no difficulties arise.

The average cost is 112,000 rubles.

• the presence of two electric drives;
• the cargo screw is equipped with a self-braking thread;
• long service life;
• excellent reliability and durability;
• pickups have different lengths;
• cost of repairs is reasonable.

• significant have not been established.

T4 (220 V)

The Chinese assembly model is able to lift machines weighing up to 4 tons for maintenance and troubleshooting purposes. It has a reliable locking system, a small paw lift height, independent safety locks, lower synchronization, an electro-hydraulic drive. Parameters: 3400 x 2820 mm, weight - 600 kg, two racks.

The average price is 112585 rubles.

• affordable;
• good quality of the material used;
• reliability;
• long service life;
• no jerks when lifting;
• easy to operate and maintain.

• not installed.

scissor

Such lifts are very popular in those car services where the owners are trying to expand the scope of services provided. They are small in height and make it possible to perform tire fitting work. Often installed in rooms with low height.

PGN-3000/R-02, recessed

Consists of short platforms, two hydraulic cylinders. Mounted flush with the floor. Retractable platforms allow you to service cars of various classes. Thanks to the stationary remote control, it is convenient to control. It is possible to manually lower the machine in case of an emergency power outage. Can be completed with adapters for frame cars.

The average price is 250,000 rubles.

• imported hydraulics;
• reliable;
• comfortable;
• functional.

• missing.

Astra Minilift AE100.1

Scissor, mobile, pneumatic device designed to lift the rear or front of the car to a height of up to 55 cm. Widely used in small boxes. The descent and ascent time is about 15 seconds, the weight of the structure is 115 kg, the parameters are 1200 x 550 x 32 mm, the maximum load capacity is 2.5 tons.

Price - 76500 rubles.

• functional;
• comfortable;
• durable;
• affordable;
• high speed;
• does not require connection to the mains;
• Complete with safety stand.

• not identified.

Werther Stratos SR/E (OMA 532LP 35), l/c 3.5 t

It is popular with owners of car services where locksmith work is carried out on small trucks and cars. Electro-hydraulic floor unit with two double reliable hydraulic cylinders, hydraulic synchronization system, automatic lowering control, mechanic's leg protection.

The average price is 552,822 rubles.

• there is the possibility of manual descent in the event of a power outage;
• the control panel is quite compact;
• does not require constant maintenance;
• reliable and durable;
• functional.

• significant have not been established.

Conclusion

A car lift is a kind of garage equipment that allows the master to quickly and efficiently repair an iron horse. It allows the auto-mechanic to get any unit or unit, analyze its performance and repair it in case of a malfunction. They come in different types, but all have such positive qualities as ease of installation and maintenance, ease of operation, reliability, durability, functionality.