Ranking of the best smartphone car holders in 2022

Everyone knows that while driving a car, it is dangerous to be distracted from the road, and with the advent of modern gadgets, smartphones, navigators and tablets, you still have to be distracted. To minimize the time that the driver spends distracting from the road (for example, in order to check with the navigator), special car holders for smartphones have been created. Such holders are usually attached to the dashboard - thanks to this, a side view is enough to periodically observe the device, and not focus all your attention on its display. In addition, a securely fixed device will not fall while the car is moving.

Pros and cons of different types of holders

Holders for mobile devices have various types of mounts that allow you to install devices on the dashboard, on the windshield, on the interior rear-view mirror and even on the steering wheel. According to the method of fastening, the holders have the following varieties:

• silicone mat with a sticky surface;
• clips attached to the ventilation deflector;
• steering wheel strap;
• magnetic holder;
• mount in cd player;
• suction bracket.

Velcro mat

• the device can be positioned at a certain angle;
• some designs allow you to charge your smartphone through a special adapter.

• not a very secure fit.

Air vent grille mount

• affordable cost;
• compact dimensions;
• reliability;
• allows you to place the device close to the driver;
• simplicity and convenience.

• may not be attached to every grid;
• blocks one of the ventilation channels;
• the smartphone is exposed to air flow, including hot air (when the stove is on).

Handlebar strap

• smartphone as close to the driver as possible.

• the inability to charge the phone while it is attached to the steering wheel;
• the device partially overlaps the instrument panel;
• with intensive rotation of the steering wheel, the device will interfere.

Magnetic mount

• Ease of use;
• compactness;
• many accommodation options;
• nice design;
• versatility - you can mount tablets and navigators.

• overcharge;
• the need to attach a magnetic disk to the device.

mount in cd player

• smartphone in front of your eyes;
• does not interfere with the view

• inconvenience when working with the autoplayer.

on a suction cup

• the suction cup is securely attached to the windshield;
• universality;
• the most common way;
• cheap and inexpensive models;
• Ease of use.

• low degree of reliability;
• difficult installation;
• does not hold heavy gadgets well;
• on a rough surface, Velcro holds worse.

Which brand smartphone holder is better to choose?

Good quality usually means high cost, but a truly high-quality device is reliable, easy to use. Such devices are produced by well-known companies that are constantly improving their products, introducing the latest developments. The most popular companies are:

• Belkin International - for large devices and harsh roads;
• iOttie - for CD slot
• Kenu - compact holders for small smartphones;
• Nite Ize - neat, not bulky designs;
• Onetto - for devices that have a lot of weight, as well as for a quiet city ride;
• Ppyple - for installing the gadget in line of sight, as well as for aggressive driving.

Review of the best car holders for smartphones

This list includes devices that are the best in quality, design, mounting method and customer reviews, as well as the most popular holders from AliExpress.

Baseus Magnetic Car Holder

Inexpensive and best-selling magnetic holder.The construction material is aluminum alloy, the color of most models is black, and the design is strict. The main advantage of the holder lies in its versatility - it is compatible with different-sized devices, in addition, it is compact, and has an aesthetic discreet appearance. The design is made in such a way that the gadget can be installed at any angle, and all buttons, ports and connectors of the smartphone remain accessible, including for the charger. The average price is 290 rubles.

• reliable fixation;
• compactness;
• budget model;
• the possibility of recharging;
• compatible with any smartphone.

• not detected.

Orico CSP1

Multifunctional holder, which is a universal soft and flexible Velcro mat, equipped with sides for secure fixation of the smartphone. It is easily installed on the dashboard and is able to fix the device in both horizontal and vertical positions. The dimensions of the holder allow you to place not only a smartphone, but also a medium-sized tablet. The surface of the structure adheres perfectly and does not slip off, leaving no marks. The average cost of the device is 480 rubles.

• easy to wash with plain water;
• does not deteriorate from temperature changes;
• universality;
• simplicity of design;
• affordable price.

• The holder is designed to hold thin devices.

Ppyple Dash-N5

Popular low-cost suction cup holder that allows you to place your smartphone in any place convenient for the driver - on the windshield or on the dashboard.Despite the modest cost, the design of the holder is durable and reliable, and the case has a modern and attractive appearance. The model is available in black, white and with the effect of a glossy surface.

To improve the fixation of the device, the holder is equipped with a rear panel that reduces vibration when shaking. As for the fastening of the holder itself, it is reliable, thanks to a vacuum suction cup that sticks firmly to the plastic surface and glass. To dismantle the holder, a special lever is provided that allows you to detach the suction cup from the surface. The maximum size of the device that can be placed in the holder is 5.5 inches. The average price of the model is 990 rubles.

• easy installation and dismantling;
• nice design;
• reliability of device fixation;
• affordable price;
• compactness;
• there are no suction marks left on the surface.

• not found.

YNMIWEI Universal

The design of this model is distinguished by the originality of execution, as well as good build quality. YNMIWEI Universal is designed to be mounted on car seat headrest mounts, and the telescopic rod is installed between the seats - thanks to this, the device is easy to set up, move along the rod and fix in a comfortable position. The average price on AliExpress is 1,300 rubles.

• securely holds the smartphone;
• suitable for any headrests;
• the possibility of rotation devaysya;
• does not scratch fixed phone or tablet;
• high quality construction.

• not found.

Onetto Vent Mount Easy One Touch

A practical holder with a pleasant modern design from a Korean manufacturer of car accessories.It is easy to install on the deflector grille, dismantling the device is just as simple, if desired, the holder can be removed from the grille. The design of the bracket allows you to choose the desired angle of rotation. Onetto Vent Mount Easy One Touch is versatile and suitable for fixing not only a smartphone, but also a tablet: the clamps on the sides of the structure can be extended by 9 cm.

Inside, the clips are equipped with rubber pads that securely fix the device, even during aggressive driving. An important advantage of this holder model is the presence of a back wall that protects the smartphone from the air flow from the ventilation, so that the battery does not overheat. The maximum load capacity of the device is 250 g. The average cost of the model is 1,250 rubles.

• the ability to choose any angle of rotation of the bracket;
• universality;
• the presence of a protective back panel;
• good vibration absorption;
• sturdy construction.

• not detected.

TETRAX SMART

A model of a magnetic holder from an Italian manufacturer, which has not only excellent practical properties, but also an original design that can decorate a car interior. The holder can be installed on the air duct grille as well as on the dashboard. The device holds the smartphone with the help of special magnetic tapes placed in the center of the structure. The holder itself is firmly fixed on the surface and does not fall when shaking. TETRAX SMART is designed for smartphones and tablets (up to 7 inches), as well as for a maximum weight of 300 g. The average cost of the model is 1,400 rubles.

• pleasant, non-standard design;
• universality;
• reliability and strength of construction materials.

• on the dashboard keeps worse than on the air duct.

Kenu Air Frame

Holder for installation on the air intake grille - installation is carried out using a special clip that firmly holds the holder structure in place. In addition, the device is equipped with a movable arm that allows you to adjust the viewing angle and achieve the necessary comfort.

It should be noted that the design of this model is made of three types of material. So, the inner side of the clamps is equipped with wear-resistant rubber, for a more secure hold of the device. The basis of the design is made of stainless steel, which indicates high reliability and low sensitivity to shock. At the same time, the outer case of the holder is made of high quality plastic. The average cost is 1,490 rubles.

• high quality of the whole structure;
• modern stylish design;
• compact dimensions;
• strong and reliable fixation of the device;
• the possibility of tilting the bracket by 90 degrees;
• universality - the device is suitable for any type of ventilation grille;
• 360 degree swivel capability.

• not suitable for wide smartphones.

Onetto Mount Easy One Touch 2

A universal suction cup holder that is firmly attached to any type of surface, including textured ones. A feature of this model is its unusual design - the device is made in a futuristic style, which attracts with its ultra-modernity and originality. Due to the presence of settings and an expanded range of possibilities, the device can be called multifunctional. Onetto Mount Easy One Touch 2 is equipped with a telescopic tube, on which the holder itself is placed: the tube extends forward by 6 centimeters, allowing for a better view.

In addition, the device can be located at any desired angle, as well as at any convenient height. With these features and capabilities, the holder is perfect for vehicles that have a deep dashboard, such as a truck or SUV. In addition, fixing the device guarantees its stability during any kind of driving, including over bumps. The average price of the device is 1,600 rubles.

• the presence of an extension tube;
• multifunctionality;
• reliability and durability;
• strong fastening;
• original design;
• versatility.

• bulkiness;
• high price.

Scosche MagicMount Dash/Window

A simple and effective model of a magnetic car holder for a smartphone. Equipped with a vacuum suction cup, thanks to which the device is easily attached to the windshield or dashboard. The surface of the suction cup is impregnated with an adhesive substance that provides a secure fastening of the structure in place. The design is characterized by restraint and stylish simplicity.

To fix the smartphone, you need to attach a special film with magnetic properties to it. The magnet is strong enough to hold the phone stably while riding and shaking. The design allows you to charge your smartphone battery while driving, for which the holder is equipped with a small hook to hold the charger cable. The average cost is 1,790 rubles.

• ultra-reliable fastening of the suction cup holder;
• suitable for installation on any surface;
• additional magnetic film is included in the package;
• ease of use;
• guaranteed reliability of fixing the device.

• the risk of degaussing devices with a hard drive;
• in severe frost, the suction cup material hardens and deteriorates;
• high price.

How to choose the best smartphone car holder?

When choosing a phone holder for your car, each buyer is guided by his personal preferences, needs and desires. However, it will not be superfluous to familiarize yourself with the information on each option in detail, so that later you can easily choose the one that will be the most convenient, functional and reliable.

It is worth considering the most important criteria for choosing a device, as well as the parameters that it should have.

1. Mounting method. Perhaps the most important factor that car owners take into account in the first place. The type of fastening depends on the reliability of fixing a smartphone or other gadget, as well as the possibility of its location in the most convenient place for the driver in the cabin. It should be borne in mind that the suction cup holder, which is often installed on the glass, is not very convenient when the windshield is very tilted. The magnetic holder does not always hold the smartphone stably when driving over bumps, so it is more designed for driving on smooth roads. Sticky mats hold both the phone well and small items that need to be kept at hand at all times. And the holders mounted on the air intake grille have a powerful latch that securely holds the device in any type of riding.
2. Fastening reliability. A good holder should not only fix the mobile device, but also firmly attached to any surface.
3. Mobility.The holder mount must be movable, providing the ability to adjust the viewing angle - this will allow the driver to easily observe the screen of the device and not be distracted from the road. The presence of viewing angle settings makes it possible to create comfortable conditions.
4. Smartphone dimensions. It is best to choose a holder designed for a specific device model, or opt for a universal holder with expanding latch tabs - this feature will allow you to place a smartphone of any size or even a tablet.
5. Appearance and design. This parameter completely depends on the taste of the car owner, so the only factor to consider is the not too bright appearance of the holder: flashy colors can become an annoying spot that distracts from the road.
6. Availability of additional options. Many devices are equipped with additional devices to create maximum comfort. These additions include a headset, connectors for charging the phone, additional attachment details. The presence of such parameters makes it possible to fully use the capabilities of the smartphone, charge the battery while driving.

A good, reliable gadget holder should meet the following requirements:

• ensure a strong and stable fixation of a smartphone or other device in the position that the driver needs;
• give the opportunity to control the phone with one hand, including quickly putting it on or taking it off the holder;
• have high quality construction materials;
• provide free access to all major ports and connectors of a smartphone or tablet;
• do not obstruct the view and not distract from the road and driving;
• have a design that matches the interior of the car;
• have an affordable price corresponding to the quality.

As for the manufacturers of car accessories, they must have a good reputation, and their products must be reliable and have positive reviews.

Technologies are constantly improving and developing, smartphones and tablets have firmly occupied space in a person’s life, making it possible not only to be always in touch, but also to use convenient and useful applications, such as navigation programs. All this requires making changes in the usual life, buying special holders for smartphones. The modern car accessories market offers a large selection of holders suitable for any device and allowing you to use all the multimedia features while driving.